If you rely heavily on VPN to bypass your regional filters then it will be a good idea to have extra entropy in hand. Any OpenSource Entropy stick should work on Brooklyn from now.
If you rely heavily on VPN to bypass your regional filters then it will be a good idea to have extra entropy in hand. Any OpenSource Entropy stick should work on Brooklyn from now.
Note: Use raspi-config to setup your wifi or add plamsa desktop network manager with "sudo apt install plasma-nm" . It is assumed that you will be using an ethernet/network cable or keyboard and mouse to setup and configure your desktop. For headless image, you only need SSH access to your hardwired device.
Note: Use raspi-config to setup your wifi or add plamsa desktop network manager with "sudo apt install plasma-nm" . It is assumed that you will be using an ethernet/network cable or keyboard and mouse to setup and configure your desktop. For headless image, you only need SSH access to your hardwired device. If you are facing Link Not Ready message still then simply reboot your Brooklyn device after doing a "sudo apt purge openresolv dhcpcd5".
You can get a release and flash it directly on your USB 3 hard drive with Balena Etcher. The default image size is meant for a 32GB microSD card. If you have a bigger microSD card then after login do a "sudo raspi-config", head over to Advacned and resize the file system. Same can be done for a GPT partitioned USB 3 hard drive/SSD. Keep in mind that MBR drives have a size limit per block partition. For 4TB or bigger drive you might want to use GPT instead. If you have purchased a Raspberry Pi 4 elsewhere then you might have to flash the boot loader to do a mass storaeg boot. Ask The Moose on the loose for help.
You can get a release and flash it directly on your USB 3 hard drive with Balena Etcher. The default image size is meant for a 32GB microSD card. If you have a bigger microSD card then after login do a "sudo raspi-config", head over to Advacned and resize the file system. Same can be done for a GPT partitioned USB 3 hard drive/SSD. Keep in mind that MBR drives have a size limit per block partition. For 4TB or bigger drive you might want to use GPT instead. If you have purchased a Raspberry Pi 4 elsewhere then you might have to flash the boot loader to do a mass storaeg boot. Ask The Moose on the loose for help.
Scare Crowe
3 years ago