mirror of https://github.com/Qortal/Brooklyn
You can not select more than 25 topics
Topics must start with a letter or number, can include dashes ('-') and can be up to 35 characters long.
74 lines
2.7 KiB
74 lines
2.7 KiB
#define BOARD_NAME "ST Nucleo F103" |
|
#define BOARD_ID 0x9b87c16d |
|
|
|
/* |
|
* Please add X3 and USB cable to ST Nucleo F103. |
|
* |
|
* Solder X3 XTAL of 8MHz (and put C33 and C34 of 22pF). |
|
* Solder the bridges for R35 and R37, since it's 0 ohm. |
|
* |
|
* (Optional) Remove SB54 and SB55. |
|
* |
|
* At CN10, connect USB cable |
|
* Vbus RED --> 10 NC ----------> CN7 (6 E5V) |
|
* D+ GREEN --> 12 PA11 ---[1K5]--> CN6 (4 3V3) |
|
* D- WHITE --> 14 PA12 |
|
* GND BLACK --> 20 GND |
|
*/ |
|
|
|
#define MCU_STM32F1 1 |
|
#define STM32F10X_MD /* Medium-density device */ |
|
|
|
#define STM32_PLLXTPRE STM32_PLLXTPRE_DIV1 |
|
#define STM32_PLLMUL_VALUE 9 |
|
#define STM32_HSECLK 8000000 |
|
|
|
#define GPIO_LED_BASE GPIOA_BASE |
|
#define GPIO_LED_SET_TO_EMIT 5 |
|
#undef GPIO_USB_BASE /* No external DISCONNECT/RENUM circuit. */ |
|
#define GPIO_OTHER_BASE GPIOB_BASE |
|
|
|
/* |
|
* Port A setup. |
|
* PA0 - Input with pull-up USART2-CTS |
|
* PA1 - Alternate function push pull output 2MHz USART2-RTS |
|
* PA2 - Alternate function push pull output 2MHz USART2-TX |
|
* PA3 - Input with pull-up USART2-RX |
|
* PA4 - Alternate function push pull output 2MHz USART2-CK |
|
* PA5 - Push pull output 2MHz (LED 1:ON 0:OFF) |
|
* PA11 - Push Pull output 10MHz 0 default (until USB enabled) (USBDM) |
|
* PA12 - Push Pull output 10MHz 0 default (until USB enabled) (USBDP) |
|
* ------------------------ Default |
|
* PAx - input with pull-up |
|
*/ |
|
#define VAL_GPIO_LED_ODR 0xFFFFE7FF |
|
#define VAL_GPIO_LED_CRL 0x882A8AA8 /* PA7...PA0 */ |
|
#define VAL_GPIO_LED_CRH 0x88811888 /* PA15...PA8 */ |
|
|
|
/* |
|
* Port B setup. |
|
* PB0 - input with pull-up: AN8 for NeuG |
|
* PB1 - input with pull-up: AN9 for NeuG |
|
* --- |
|
* --- |
|
* PB4 - Input with pull-up: Card insertion detect: 0 when detected |
|
* --- |
|
* PB6 - Output push pull 2MHz: Vcc for card: default 0 |
|
* --- |
|
* PB8 - Output push pull 2MHz: Vpp for card: default 0 |
|
* PB9 - Output push pull 2MHz: RST for card: default 0 |
|
* PB10 - Alternate function open-drain output 50MHz USART3-TX |
|
* PB11 - Input with pull-up USART3-RX |
|
* PB12 - Alternate function push pull output 50MHz USART3-CK |
|
* PB13 - Input with pull-up USART3-CTS |
|
* PB14 - Alternate function push pull output 50MHz USART3-RTS |
|
* --- |
|
* ------------------------ Default |
|
* PBx - input with pull-up. |
|
*/ |
|
#define VAL_GPIO_OTHER_ODR 0xFFFFFCBF |
|
#define VAL_GPIO_OTHER_CRL 0x82888888 /* PB7...PB0 */ |
|
#define VAL_GPIO_OTHER_CRH 0x8B8B8F22 /* PB15...PB8 */ |
|
|
|
#define RCC_ENR_IOP_EN (RCC_APB2ENR_IOPAEN | RCC_APB2ENR_IOPBEN) |
|
#define RCC_RSTR_IOP_RST (RCC_APB2RSTR_IOPARST | RCC_APB2RSTR_IOPBRST)
|
|
|