forked from Qortal/Brooklyn
You can not select more than 25 topics
Topics must start with a letter or number, can include dashes ('-') and can be up to 35 characters long.
42 lines
1.3 KiB
42 lines
1.3 KiB
* Atmel Direct Memory Access Controller (DMA) |
|
|
|
Required properties: |
|
- compatible: Should be "atmel,<chip>-dma". |
|
- reg: Should contain DMA registers location and length. |
|
- interrupts: Should contain DMA interrupt. |
|
- #dma-cells: Must be <2>, used to represent the number of integer cells in |
|
the dmas property of client devices. |
|
|
|
Example: |
|
|
|
dma0: dma@ffffec00 { |
|
compatible = "atmel,at91sam9g45-dma"; |
|
reg = <0xffffec00 0x200>; |
|
interrupts = <21>; |
|
#dma-cells = <2>; |
|
}; |
|
|
|
DMA clients connected to the Atmel DMA controller must use the format |
|
described in the dma.txt file, using a three-cell specifier for each channel: |
|
a phandle plus two integer cells. |
|
The three cells in order are: |
|
|
|
1. A phandle pointing to the DMA controller. |
|
2. The memory interface (16 most significant bits), the peripheral interface |
|
(16 less significant bits). |
|
3. Parameters for the at91 DMA configuration register which are device |
|
dependent: |
|
- bit 7-0: peripheral identifier for the hardware handshaking interface. The |
|
identifier can be different for tx and rx. |
|
- bit 11-8: FIFO configuration. 0 for half FIFO, 1 for ALAP, 2 for ASAP. |
|
|
|
Example: |
|
|
|
i2c0@i2c@f8010000 { |
|
compatible = "atmel,at91sam9x5-i2c"; |
|
reg = <0xf8010000 0x100>; |
|
interrupts = <9 4 6>; |
|
dmas = <&dma0 1 7>, |
|
<&dma0 1 8>; |
|
dma-names = "tx", "rx"; |
|
};
|
|
|