forked from Qortal/Brooklyn
You can not select more than 25 topics
Topics must start with a letter or number, can include dashes ('-') and can be up to 35 characters long.
50 lines
1.5 KiB
50 lines
1.5 KiB
Technologic Systems NBUS |
|
|
|
The NBUS is a bus used to interface with peripherals in the Technologic |
|
Systems FPGA on the TS-4600 SoM. |
|
|
|
Required properties : |
|
- compatible : "technologic,ts-nbus" |
|
- #address-cells : must be 1 |
|
- #size-cells : must be 0 |
|
- pwms : The PWM bound to the FPGA |
|
- ts,data-gpios : The 8 GPIO pins connected to the data lines on the FPGA |
|
- ts,csn-gpios : The GPIO pin connected to the csn line on the FPGA |
|
- ts,txrx-gpios : The GPIO pin connected to the txrx line on the FPGA |
|
- ts,strobe-gpios : The GPIO pin connected to the stobe line on the FPGA |
|
- ts,ale-gpios : The GPIO pin connected to the ale line on the FPGA |
|
- ts,rdy-gpios : The GPIO pin connected to the rdy line on the FPGA |
|
|
|
Child nodes: |
|
|
|
The NBUS node can contain zero or more child nodes representing peripherals |
|
on the bus. |
|
|
|
Example: |
|
|
|
nbus { |
|
compatible = "technologic,ts-nbus"; |
|
pinctrl-0 = <&nbus_pins>; |
|
#address-cells = <1>; |
|
#size-cells = <0>; |
|
pwms = <&pwm 2 83>; |
|
ts,data-gpios = <&gpio0 0 GPIO_ACTIVE_HIGH |
|
&gpio0 1 GPIO_ACTIVE_HIGH |
|
&gpio0 2 GPIO_ACTIVE_HIGH |
|
&gpio0 3 GPIO_ACTIVE_HIGH |
|
&gpio0 4 GPIO_ACTIVE_HIGH |
|
&gpio0 5 GPIO_ACTIVE_HIGH |
|
&gpio0 6 GPIO_ACTIVE_HIGH |
|
&gpio0 7 GPIO_ACTIVE_HIGH>; |
|
ts,csn-gpios = <&gpio0 16 GPIO_ACTIVE_HIGH>; |
|
ts,txrx-gpios = <&gpio0 24 GPIO_ACTIVE_HIGH>; |
|
ts,strobe-gpios = <&gpio0 25 GPIO_ACTIVE_HIGH>; |
|
ts,ale-gpios = <&gpio0 26 GPIO_ACTIVE_HIGH>; |
|
ts,rdy-gpios = <&gpio0 21 GPIO_ACTIVE_HIGH>; |
|
|
|
watchdog@2a { |
|
compatible = "..."; |
|
|
|
/* ... */ |
|
}; |
|
};
|
|
|