forked from Qortal/Brooklyn
You can not select more than 25 topics
Topics must start with a letter or number, can include dashes ('-') and can be up to 35 characters long.
53 lines
1.7 KiB
53 lines
1.7 KiB
Driver for ARM AXI Bus with Broadcom Plugins (bcma) |
|
|
|
Required properties: |
|
|
|
- compatible : brcm,bus-axi |
|
|
|
- reg : iomem address range of chipcommon core |
|
|
|
The cores on the AXI bus are automatically detected by bcma with the |
|
memory ranges they are using and they get registered afterwards. |
|
Automatic detection of the IRQ number is not working on |
|
BCM47xx/BCM53xx ARM SoCs. To assign IRQ numbers to the cores, provide |
|
them manually through device tree. Use an interrupt-map to specify the |
|
IRQ used by the devices on the bus. The first address is just an index, |
|
because we do not have any special register. |
|
|
|
The top-level axi bus may contain children representing attached cores |
|
(devices). This is needed since some hardware details can't be auto |
|
detected (e.g. IRQ numbers). Also some of the cores may be responsible |
|
for extra things, e.g. ChipCommon providing access to the GPIO chip. |
|
|
|
Example: |
|
|
|
axi@18000000 { |
|
compatible = "brcm,bus-axi"; |
|
reg = <0x18000000 0x1000>; |
|
ranges = <0x00000000 0x18000000 0x00100000>; |
|
#address-cells = <1>; |
|
#size-cells = <1>; |
|
#interrupt-cells = <1>; |
|
interrupt-map-mask = <0x000fffff 0xffff>; |
|
interrupt-map = |
|
/* Ethernet Controller 0 */ |
|
<0x00024000 0 &gic GIC_SPI 147 IRQ_TYPE_LEVEL_HIGH>, |
|
|
|
/* Ethernet Controller 1 */ |
|
<0x00025000 0 &gic GIC_SPI 148 IRQ_TYPE_LEVEL_HIGH>; |
|
|
|
/* PCIe Controller 0 */ |
|
<0x00012000 0 &gic GIC_SPI 126 IRQ_TYPE_LEVEL_HIGH>, |
|
<0x00012000 1 &gic GIC_SPI 127 IRQ_TYPE_LEVEL_HIGH>, |
|
<0x00012000 2 &gic GIC_SPI 128 IRQ_TYPE_LEVEL_HIGH>, |
|
<0x00012000 3 &gic GIC_SPI 129 IRQ_TYPE_LEVEL_HIGH>, |
|
<0x00012000 4 &gic GIC_SPI 130 IRQ_TYPE_LEVEL_HIGH>, |
|
<0x00012000 5 &gic GIC_SPI 131 IRQ_TYPE_LEVEL_HIGH>; |
|
|
|
chipcommon { |
|
reg = <0x00000000 0x1000>; |
|
|
|
gpio-controller; |
|
#gpio-cells = <2>; |
|
}; |
|
};
|
|
|