forked from Qortal/Brooklyn
You can not select more than 25 topics
Topics must start with a letter or number, can include dashes ('-') and can be up to 35 characters long.
826 lines
16 KiB
826 lines
16 KiB
// SPDX-License-Identifier: GPL-2.0-only |
|
/* |
|
* Copyright (c) 2015, The Linux Foundation. All rights reserved. |
|
*/ |
|
|
|
#include "msm8916-pm8916.dtsi" |
|
#include <dt-bindings/gpio/gpio.h> |
|
#include <dt-bindings/input/input.h> |
|
#include <dt-bindings/pinctrl/qcom,pmic-gpio.h> |
|
#include <dt-bindings/pinctrl/qcom,pmic-mpp.h> |
|
#include <dt-bindings/sound/apq8016-lpass.h> |
|
|
|
/ { |
|
aliases { |
|
serial0 = &blsp1_uart2; |
|
serial1 = &blsp1_uart1; |
|
usid0 = &pm8916_0; |
|
i2c0 = &blsp_i2c2; |
|
i2c1 = &blsp_i2c6; |
|
i2c3 = &blsp_i2c4; |
|
spi0 = &blsp_spi5; |
|
spi1 = &blsp_spi3; |
|
}; |
|
|
|
chosen { |
|
stdout-path = "serial0"; |
|
}; |
|
|
|
camera_vdddo_1v8: camera-vdddo-1v8 { |
|
compatible = "regulator-fixed"; |
|
regulator-name = "camera_vdddo"; |
|
regulator-min-microvolt = <1800000>; |
|
regulator-max-microvolt = <1800000>; |
|
regulator-always-on; |
|
}; |
|
|
|
camera_vdda_2v8: camera-vdda-2v8 { |
|
compatible = "regulator-fixed"; |
|
regulator-name = "camera_vdda"; |
|
regulator-min-microvolt = <2800000>; |
|
regulator-max-microvolt = <2800000>; |
|
regulator-always-on; |
|
}; |
|
|
|
camera_vddd_1v5: camera-vddd-1v5 { |
|
compatible = "regulator-fixed"; |
|
regulator-name = "camera_vddd"; |
|
regulator-min-microvolt = <1500000>; |
|
regulator-max-microvolt = <1500000>; |
|
regulator-always-on; |
|
}; |
|
|
|
reserved-memory { |
|
ramoops@bff00000 { |
|
compatible = "ramoops"; |
|
reg = <0x0 0xbff00000 0x0 0x100000>; |
|
|
|
record-size = <0x20000>; |
|
console-size = <0x20000>; |
|
ftrace-size = <0x20000>; |
|
}; |
|
}; |
|
|
|
usb2513 { |
|
compatible = "smsc,usb3503"; |
|
reset-gpios = <&pm8916_gpios 3 GPIO_ACTIVE_LOW>; |
|
initial-mode = <1>; |
|
}; |
|
|
|
usb_id: usb-id { |
|
compatible = "linux,extcon-usb-gpio"; |
|
id-gpio = <&msmgpio 121 GPIO_ACTIVE_HIGH>; |
|
pinctrl-names = "default"; |
|
pinctrl-0 = <&usb_id_default>; |
|
}; |
|
|
|
hdmi-out { |
|
compatible = "hdmi-connector"; |
|
type = "a"; |
|
|
|
port { |
|
hdmi_con: endpoint { |
|
remote-endpoint = <&adv7533_out>; |
|
}; |
|
}; |
|
}; |
|
|
|
gpio-keys { |
|
compatible = "gpio-keys"; |
|
#address-cells = <1>; |
|
#size-cells = <0>; |
|
autorepeat; |
|
|
|
pinctrl-names = "default"; |
|
pinctrl-0 = <&msm_key_volp_n_default>; |
|
|
|
button@0 { |
|
label = "Volume Up"; |
|
linux,code = <KEY_VOLUMEUP>; |
|
gpios = <&msmgpio 107 GPIO_ACTIVE_LOW>; |
|
}; |
|
}; |
|
|
|
leds { |
|
pinctrl-names = "default"; |
|
pinctrl-0 = <&msmgpio_leds>, |
|
<&pm8916_gpios_leds>, |
|
<&pm8916_mpps_leds>; |
|
|
|
compatible = "gpio-leds"; |
|
|
|
led@1 { |
|
label = "apq8016-sbc:green:user1"; |
|
gpios = <&msmgpio 21 GPIO_ACTIVE_HIGH>; |
|
linux,default-trigger = "heartbeat"; |
|
default-state = "off"; |
|
}; |
|
|
|
led@2 { |
|
label = "apq8016-sbc:green:user2"; |
|
gpios = <&msmgpio 120 GPIO_ACTIVE_HIGH>; |
|
linux,default-trigger = "mmc0"; |
|
default-state = "off"; |
|
}; |
|
|
|
led@3 { |
|
label = "apq8016-sbc:green:user3"; |
|
gpios = <&pm8916_gpios 1 GPIO_ACTIVE_HIGH>; |
|
linux,default-trigger = "mmc1"; |
|
default-state = "off"; |
|
}; |
|
|
|
led@4 { |
|
label = "apq8016-sbc:green:user4"; |
|
gpios = <&pm8916_gpios 2 GPIO_ACTIVE_HIGH>; |
|
linux,default-trigger = "none"; |
|
panic-indicator; |
|
default-state = "off"; |
|
}; |
|
|
|
led@5 { |
|
label = "apq8016-sbc:yellow:wlan"; |
|
gpios = <&pm8916_mpps 2 GPIO_ACTIVE_HIGH>; |
|
linux,default-trigger = "phy0tx"; |
|
default-state = "off"; |
|
}; |
|
|
|
led@6 { |
|
label = "apq8016-sbc:blue:bt"; |
|
gpios = <&pm8916_mpps 3 GPIO_ACTIVE_HIGH>; |
|
linux,default-trigger = "bluetooth-power"; |
|
default-state = "off"; |
|
}; |
|
}; |
|
}; |
|
|
|
&blsp_dma { |
|
status = "okay"; |
|
}; |
|
|
|
&blsp_i2c2 { |
|
/* On Low speed expansion */ |
|
status = "okay"; |
|
label = "LS-I2C0"; |
|
}; |
|
|
|
&blsp_i2c4 { |
|
/* On High speed expansion */ |
|
status = "okay"; |
|
label = "HS-I2C2"; |
|
|
|
adv_bridge: bridge@39 { |
|
status = "okay"; |
|
|
|
compatible = "adi,adv7533"; |
|
reg = <0x39>; |
|
|
|
interrupt-parent = <&msmgpio>; |
|
interrupts = <31 IRQ_TYPE_EDGE_FALLING>; |
|
|
|
adi,dsi-lanes = <4>; |
|
clocks = <&rpmcc RPM_SMD_BB_CLK2>; |
|
clock-names = "cec"; |
|
|
|
pd-gpios = <&msmgpio 32 GPIO_ACTIVE_HIGH>; |
|
|
|
avdd-supply = <&pm8916_l6>; |
|
v1p2-supply = <&pm8916_l6>; |
|
v3p3-supply = <&pm8916_l17>; |
|
|
|
pinctrl-names = "default","sleep"; |
|
pinctrl-0 = <&adv7533_int_active &adv7533_switch_active>; |
|
pinctrl-1 = <&adv7533_int_suspend &adv7533_switch_suspend>; |
|
#sound-dai-cells = <1>; |
|
|
|
ports { |
|
#address-cells = <1>; |
|
#size-cells = <0>; |
|
|
|
port@0 { |
|
reg = <0>; |
|
adv7533_in: endpoint { |
|
remote-endpoint = <&dsi0_out>; |
|
}; |
|
}; |
|
|
|
port@1 { |
|
reg = <1>; |
|
adv7533_out: endpoint { |
|
remote-endpoint = <&hdmi_con>; |
|
}; |
|
}; |
|
}; |
|
}; |
|
}; |
|
|
|
&blsp_i2c6 { |
|
/* On Low speed expansion */ |
|
status = "okay"; |
|
label = "LS-I2C1"; |
|
}; |
|
|
|
&blsp_spi3 { |
|
/* On High speed expansion */ |
|
status = "okay"; |
|
label = "HS-SPI1"; |
|
}; |
|
|
|
&blsp_spi5 { |
|
/* On Low speed expansion */ |
|
status = "okay"; |
|
label = "LS-SPI0"; |
|
}; |
|
|
|
&blsp1_uart1 { |
|
status = "okay"; |
|
label = "LS-UART0"; |
|
}; |
|
|
|
&blsp1_uart2 { |
|
status = "okay"; |
|
label = "LS-UART1"; |
|
}; |
|
|
|
&camss { |
|
status = "okay"; |
|
ports { |
|
port@0 { |
|
reg = <0>; |
|
csiphy0_ep: endpoint { |
|
clock-lanes = <1>; |
|
data-lanes = <0 2>; |
|
remote-endpoint = <&ov5640_ep>; |
|
status = "okay"; |
|
}; |
|
}; |
|
}; |
|
}; |
|
|
|
&cci { |
|
status = "okay"; |
|
}; |
|
|
|
&cci_i2c0 { |
|
camera_rear@3b { |
|
compatible = "ovti,ov5640"; |
|
reg = <0x3b>; |
|
|
|
enable-gpios = <&msmgpio 34 GPIO_ACTIVE_HIGH>; |
|
reset-gpios = <&msmgpio 35 GPIO_ACTIVE_LOW>; |
|
pinctrl-names = "default"; |
|
pinctrl-0 = <&camera_rear_default>; |
|
|
|
clocks = <&gcc GCC_CAMSS_MCLK0_CLK>; |
|
clock-names = "xclk"; |
|
clock-frequency = <23880000>; |
|
|
|
vdddo-supply = <&camera_vdddo_1v8>; |
|
vdda-supply = <&camera_vdda_2v8>; |
|
vddd-supply = <&camera_vddd_1v5>; |
|
|
|
/* No camera mezzanine by default */ |
|
status = "disabled"; |
|
|
|
port { |
|
ov5640_ep: endpoint { |
|
clock-lanes = <1>; |
|
data-lanes = <0 2>; |
|
remote-endpoint = <&csiphy0_ep>; |
|
}; |
|
}; |
|
}; |
|
}; |
|
|
|
&dsi0_out { |
|
data-lanes = <0 1 2 3>; |
|
remote-endpoint = <&adv7533_in>; |
|
}; |
|
|
|
&lpass { |
|
status = "okay"; |
|
}; |
|
|
|
&mdss { |
|
status = "okay"; |
|
}; |
|
|
|
&pm8916_resin { |
|
status = "okay"; |
|
linux,code = <KEY_VOLUMEDOWN>; |
|
}; |
|
|
|
&pronto { |
|
status = "okay"; |
|
}; |
|
|
|
&sdhc_1 { |
|
status = "okay"; |
|
|
|
pinctrl-names = "default", "sleep"; |
|
pinctrl-0 = <&sdc1_clk_on &sdc1_cmd_on &sdc1_data_on>; |
|
pinctrl-1 = <&sdc1_clk_off &sdc1_cmd_off &sdc1_data_off>; |
|
}; |
|
|
|
&sdhc_2 { |
|
status = "okay"; |
|
|
|
pinctrl-names = "default", "sleep"; |
|
pinctrl-0 = <&sdc2_clk_on &sdc2_cmd_on &sdc2_data_on &sdc2_cd_on>; |
|
pinctrl-1 = <&sdc2_clk_off &sdc2_cmd_off &sdc2_data_off &sdc2_cd_off>; |
|
|
|
cd-gpios = <&msmgpio 38 GPIO_ACTIVE_LOW>; |
|
}; |
|
|
|
&sound { |
|
status = "okay"; |
|
|
|
pinctrl-0 = <&cdc_pdm_lines_act &ext_sec_tlmm_lines_act &ext_mclk_tlmm_lines_act>; |
|
pinctrl-1 = <&cdc_pdm_lines_sus &ext_sec_tlmm_lines_sus &ext_mclk_tlmm_lines_sus>; |
|
pinctrl-names = "default", "sleep"; |
|
qcom,model = "DB410c"; |
|
qcom,audio-routing = |
|
"AMIC2", "MIC BIAS Internal2", |
|
"AMIC3", "MIC BIAS External1"; |
|
|
|
external-dai-link@0 { |
|
link-name = "ADV7533"; |
|
cpu { |
|
sound-dai = <&lpass MI2S_QUATERNARY>; |
|
}; |
|
codec { |
|
sound-dai = <&adv_bridge 0>; |
|
}; |
|
}; |
|
|
|
internal-codec-playback-dai-link@0 { |
|
link-name = "WCD"; |
|
cpu { |
|
sound-dai = <&lpass MI2S_PRIMARY>; |
|
}; |
|
codec { |
|
sound-dai = <&lpass_codec 0>, <&wcd_codec 0>; |
|
}; |
|
}; |
|
|
|
internal-codec-capture-dai-link@0 { |
|
link-name = "WCD-Capture"; |
|
cpu { |
|
sound-dai = <&lpass MI2S_TERTIARY>; |
|
}; |
|
codec { |
|
sound-dai = <&lpass_codec 1>, <&wcd_codec 1>; |
|
}; |
|
}; |
|
}; |
|
|
|
&usb { |
|
status = "okay"; |
|
extcon = <&usb_id>, <&usb_id>; |
|
|
|
pinctrl-names = "default", "device"; |
|
pinctrl-0 = <&usb_sw_sel_pm &usb_hub_reset_pm>; |
|
pinctrl-1 = <&usb_sw_sel_pm_device &usb_hub_reset_pm_device>; |
|
}; |
|
|
|
&usb_hs_phy { |
|
extcon = <&usb_id>; |
|
}; |
|
|
|
&wcd_codec { |
|
clocks = <&gcc GCC_CODEC_DIGCODEC_CLK>; |
|
clock-names = "mclk"; |
|
qcom,mbhc-vthreshold-low = <75 150 237 450 500>; |
|
qcom,mbhc-vthreshold-high = <75 150 237 450 500>; |
|
}; |
|
|
|
/* Enable CoreSight */ |
|
&cti0 { status = "okay"; }; |
|
&cti1 { status = "okay"; }; |
|
&cti12 { status = "okay"; }; |
|
&cti13 { status = "okay"; }; |
|
&cti14 { status = "okay"; }; |
|
&cti15 { status = "okay"; }; |
|
&debug0 { status = "okay"; }; |
|
&debug1 { status = "okay"; }; |
|
&debug2 { status = "okay"; }; |
|
&debug3 { status = "okay"; }; |
|
&etf { status = "okay"; }; |
|
&etm0 { status = "okay"; }; |
|
&etm1 { status = "okay"; }; |
|
&etm2 { status = "okay"; }; |
|
&etm3 { status = "okay"; }; |
|
&etr { status = "okay"; }; |
|
&funnel0 { status = "okay"; }; |
|
&funnel1 { status = "okay"; }; |
|
&replicator { status = "okay"; }; |
|
&stm { status = "okay"; }; |
|
&tpiu { status = "okay"; }; |
|
|
|
&smd_rpm_regulators { |
|
vdd_l1_l2_l3-supply = <&pm8916_s3>; |
|
vdd_l4_l5_l6-supply = <&pm8916_s4>; |
|
vdd_l7-supply = <&pm8916_s4>; |
|
|
|
s3 { |
|
regulator-min-microvolt = <375000>; |
|
regulator-max-microvolt = <1562000>; |
|
}; |
|
|
|
s4 { |
|
regulator-min-microvolt = <1800000>; |
|
regulator-max-microvolt = <1800000>; |
|
|
|
regulator-always-on; |
|
regulator-boot-on; |
|
}; |
|
|
|
l1 { |
|
regulator-min-microvolt = <375000>; |
|
regulator-max-microvolt = <1525000>; |
|
}; |
|
|
|
l2 { |
|
regulator-min-microvolt = <1200000>; |
|
regulator-max-microvolt = <1200000>; |
|
}; |
|
|
|
l4 { |
|
regulator-min-microvolt = <1750000>; |
|
regulator-max-microvolt = <3337000>; |
|
}; |
|
|
|
l5 { |
|
regulator-min-microvolt = <1750000>; |
|
regulator-max-microvolt = <3337000>; |
|
}; |
|
|
|
l6 { |
|
regulator-min-microvolt = <1800000>; |
|
regulator-max-microvolt = <1800000>; |
|
}; |
|
|
|
l7 { |
|
regulator-min-microvolt = <1750000>; |
|
regulator-max-microvolt = <3337000>; |
|
}; |
|
|
|
l8 { |
|
regulator-min-microvolt = <1750000>; |
|
regulator-max-microvolt = <3337000>; |
|
}; |
|
|
|
l9 { |
|
regulator-min-microvolt = <1750000>; |
|
regulator-max-microvolt = <3337000>; |
|
}; |
|
|
|
l10 { |
|
regulator-min-microvolt = <1750000>; |
|
regulator-max-microvolt = <3337000>; |
|
}; |
|
|
|
l11 { |
|
regulator-min-microvolt = <1750000>; |
|
regulator-max-microvolt = <3337000>; |
|
regulator-allow-set-load; |
|
regulator-system-load = <200000>; |
|
}; |
|
|
|
l12 { |
|
regulator-min-microvolt = <1750000>; |
|
regulator-max-microvolt = <3337000>; |
|
}; |
|
|
|
l13 { |
|
regulator-min-microvolt = <1750000>; |
|
regulator-max-microvolt = <3337000>; |
|
}; |
|
|
|
l14 { |
|
regulator-min-microvolt = <1750000>; |
|
regulator-max-microvolt = <3337000>; |
|
}; |
|
|
|
/** |
|
* 1.8v required on LS expansion |
|
* for mezzanine boards |
|
*/ |
|
l15 { |
|
regulator-min-microvolt = <1750000>; |
|
regulator-max-microvolt = <3337000>; |
|
regulator-always-on; |
|
}; |
|
|
|
l16 { |
|
regulator-min-microvolt = <1750000>; |
|
regulator-max-microvolt = <3337000>; |
|
}; |
|
|
|
l17 { |
|
regulator-min-microvolt = <3300000>; |
|
regulator-max-microvolt = <3300000>; |
|
}; |
|
|
|
l18 { |
|
regulator-min-microvolt = <1750000>; |
|
regulator-max-microvolt = <3337000>; |
|
}; |
|
}; |
|
|
|
/* |
|
* 2mA drive strength is not enough when connecting multiple |
|
* I2C devices with different pull up resistors. |
|
*/ |
|
&i2c2_default { |
|
drive-strength = <16>; |
|
}; |
|
|
|
&i2c4_default { |
|
drive-strength = <16>; |
|
}; |
|
|
|
&i2c6_default { |
|
drive-strength = <16>; |
|
}; |
|
|
|
/* |
|
* GPIO name legend: proper name = the GPIO line is used as GPIO |
|
* NC = not connected (pin out but not routed from the chip to |
|
* anything the board) |
|
* "[PER]" = pin is muxed for [peripheral] (not GPIO) |
|
* LSEC = Low Speed External Connector |
|
* HSEC = High Speed External Connector |
|
* |
|
* Line names are taken from the schematic "DragonBoard410c" |
|
* dated monday, august 31, 2015. Page 5 in particular. |
|
* |
|
* For the lines routed to the external connectors the |
|
* lines are named after the 96Boards CE Specification 1.0, |
|
* Appendix "Expansion Connector Signal Description". |
|
* |
|
* When the 96Board naming of a line and the schematic name of |
|
* the same line are in conflict, the 96Board specification |
|
* takes precedence, which means that the external UART on the |
|
* LSEC is named UART0 while the schematic and SoC names this |
|
* UART3. This is only for the informational lines i.e. "[FOO]", |
|
* the GPIO named lines "GPIO-A" thru "GPIO-L" are the only |
|
* ones actually used for GPIO. |
|
*/ |
|
|
|
&msmgpio { |
|
gpio-line-names = |
|
"[UART0_TX]", /* GPIO_0, LSEC pin 5 */ |
|
"[UART0_RX]", /* GPIO_1, LSEC pin 7 */ |
|
"[UART0_CTS_N]", /* GPIO_2, LSEC pin 3 */ |
|
"[UART0_RTS_N]", /* GPIO_3, LSEC pin 9 */ |
|
"[UART1_TX]", /* GPIO_4, LSEC pin 11 */ |
|
"[UART1_RX]", /* GPIO_5, LSEC pin 13 */ |
|
"[I2C0_SDA]", /* GPIO_8, LSEC pin 17 */ |
|
"[I2C0_SCL]", /* GPIO_7, LSEC pin 15 */ |
|
"[SPI1_DOUT]", /* SPI1_MOSI, HSEC pin 1 */ |
|
"[SPI1_DIN]", /* SPI1_MISO, HSEC pin 11 */ |
|
"[SPI1_CS]", /* SPI1_CS_N, HSEC pin 7 */ |
|
"[SPI1_SCLK]", /* SPI1_CLK, HSEC pin 9 */ |
|
"GPIO-B", /* LS_EXP_GPIO_B, LSEC pin 24 */ |
|
"GPIO-C", /* LS_EXP_GPIO_C, LSEC pin 25 */ |
|
"[I2C3_SDA]", /* HSEC pin 38 */ |
|
"[I2C3_SCL]", /* HSEC pin 36 */ |
|
"[SPI0_MOSI]", /* LSEC pin 14 */ |
|
"[SPI0_MISO]", /* LSEC pin 10 */ |
|
"[SPI0_CS_N]", /* LSEC pin 12 */ |
|
"[SPI0_CLK]", /* LSEC pin 8 */ |
|
"HDMI_HPD_N", /* GPIO 20 */ |
|
"USR_LED_1_CTRL", |
|
"[I2C1_SDA]", /* GPIO_22, LSEC pin 21 */ |
|
"[I2C1_SCL]", /* GPIO_23, LSEC pin 19 */ |
|
"GPIO-G", /* LS_EXP_GPIO_G, LSEC pin 29 */ |
|
"GPIO-H", /* LS_EXP_GPIO_H, LSEC pin 30 */ |
|
"[CSI0_MCLK]", /* HSEC pin 15 */ |
|
"[CSI1_MCLK]", /* HSEC pin 17 */ |
|
"GPIO-K", /* LS_EXP_GPIO_K, LSEC pin 33 */ |
|
"[I2C2_SDA]", /* HSEC pin 34 */ |
|
"[I2C2_SCL]", /* HSEC pin 32 */ |
|
"DSI2HDMI_INT_N", |
|
"DSI_SW_SEL_APQ", |
|
"GPIO-L", /* LS_EXP_GPIO_L, LSEC pin 34 */ |
|
"GPIO-J", /* LS_EXP_GPIO_J, LSEC pin 32 */ |
|
"GPIO-I", /* LS_EXP_GPIO_I, LSEC pin 31 */ |
|
"GPIO-A", /* LS_EXP_GPIO_A, LSEC pin 23 */ |
|
"FORCED_USB_BOOT", |
|
"SD_CARD_DET_N", |
|
"[WCSS_BT_SSBI]", |
|
"[WCSS_WLAN_DATA_2]", /* GPIO 40 */ |
|
"[WCSS_WLAN_DATA_1]", |
|
"[WCSS_WLAN_DATA_0]", |
|
"[WCSS_WLAN_SET]", |
|
"[WCSS_WLAN_CLK]", |
|
"[WCSS_FM_SSBI]", |
|
"[WCSS_FM_SDI]", |
|
"[WCSS_BT_DAT_CTL]", |
|
"[WCSS_BT_DAT_STB]", |
|
"NC", |
|
"NC", /* GPIO 50 */ |
|
"NC", |
|
"NC", |
|
"NC", |
|
"NC", |
|
"NC", |
|
"NC", |
|
"NC", |
|
"NC", |
|
"NC", |
|
"NC", /* GPIO 60 */ |
|
"NC", |
|
"NC", |
|
"[CDC_PDM0_CLK]", |
|
"[CDC_PDM0_SYNC]", |
|
"[CDC_PDM0_TX0]", |
|
"[CDC_PDM0_RX0]", |
|
"[CDC_PDM0_RX1]", |
|
"[CDC_PDM0_RX2]", |
|
"GPIO-D", /* LS_EXP_GPIO_D, LSEC pin 26 */ |
|
"NC", /* GPIO 70 */ |
|
"NC", |
|
"NC", |
|
"NC", |
|
"NC", /* GPIO 74 */ |
|
"NC", |
|
"NC", |
|
"NC", |
|
"NC", |
|
"NC", |
|
"BOOT_CONFIG_0", /* GPIO 80 */ |
|
"BOOT_CONFIG_1", |
|
"BOOT_CONFIG_2", |
|
"BOOT_CONFIG_3", |
|
"NC", |
|
"NC", |
|
"BOOT_CONFIG_5", |
|
"NC", |
|
"NC", |
|
"NC", |
|
"NC", /* GPIO 90 */ |
|
"NC", |
|
"NC", |
|
"NC", |
|
"NC", |
|
"NC", |
|
"NC", |
|
"NC", |
|
"NC", |
|
"NC", |
|
"NC", /* GPIO 100 */ |
|
"NC", |
|
"NC", |
|
"NC", |
|
"SSBI_GPS", |
|
"NC", |
|
"NC", |
|
"KEY_VOLP_N", |
|
"NC", |
|
"NC", |
|
"[LS_EXP_MI2S_WS]", /* GPIO 110 */ |
|
"NC", |
|
"NC", |
|
"[LS_EXP_MI2S_SCK]", |
|
"[LS_EXP_MI2S_DATA0]", |
|
"GPIO-E", /* LS_EXP_GPIO_E, LSEC pin 27 */ |
|
"NC", |
|
"[DSI2HDMI_MI2S_WS]", |
|
"[DSI2HDMI_MI2S_SCK]", |
|
"[DSI2HDMI_MI2S_DATA0]", |
|
"USR_LED_2_CTRL", /* GPIO 120 */ |
|
"SB_HS_ID"; |
|
|
|
msmgpio_leds: msmgpio-leds { |
|
pins = "gpio21", "gpio120"; |
|
function = "gpio"; |
|
|
|
output-low; |
|
}; |
|
|
|
usb_id_default: usb-id-default { |
|
pins = "gpio121"; |
|
function = "gpio"; |
|
|
|
drive-strength = <8>; |
|
input-enable; |
|
bias-pull-up; |
|
}; |
|
|
|
adv7533_int_active: adv533-int-active { |
|
pins = "gpio31"; |
|
function = "gpio"; |
|
|
|
drive-strength = <16>; |
|
bias-disable; |
|
}; |
|
|
|
adv7533_int_suspend: adv7533-int-suspend { |
|
pins = "gpio31"; |
|
function = "gpio"; |
|
|
|
drive-strength = <2>; |
|
bias-disable; |
|
}; |
|
|
|
adv7533_switch_active: adv7533-switch-active { |
|
pins = "gpio32"; |
|
function = "gpio"; |
|
|
|
drive-strength = <16>; |
|
bias-disable; |
|
}; |
|
|
|
adv7533_switch_suspend: adv7533-switch-suspend { |
|
pins = "gpio32"; |
|
function = "gpio"; |
|
|
|
drive-strength = <2>; |
|
bias-disable; |
|
}; |
|
|
|
msm_key_volp_n_default: msm-key-volp-n-default { |
|
pins = "gpio107"; |
|
function = "gpio"; |
|
|
|
drive-strength = <8>; |
|
input-enable; |
|
bias-pull-up; |
|
}; |
|
}; |
|
|
|
&pm8916_gpios { |
|
gpio-line-names = |
|
"USR_LED_3_CTRL", |
|
"USR_LED_4_CTRL", |
|
"USB_HUB_RESET_N_PM", |
|
"USB_SW_SEL_PM"; |
|
|
|
usb_hub_reset_pm: usb-hub-reset-pm { |
|
pins = "gpio3"; |
|
function = PMIC_GPIO_FUNC_NORMAL; |
|
|
|
input-disable; |
|
output-high; |
|
}; |
|
|
|
usb_hub_reset_pm_device: usb-hub-reset-pm-device { |
|
pins = "gpio3"; |
|
function = PMIC_GPIO_FUNC_NORMAL; |
|
|
|
output-low; |
|
}; |
|
|
|
usb_sw_sel_pm: usb-sw-sel-pm { |
|
pins = "gpio4"; |
|
function = PMIC_GPIO_FUNC_NORMAL; |
|
|
|
power-source = <PM8916_GPIO_VPH>; |
|
input-disable; |
|
output-high; |
|
}; |
|
|
|
usb_sw_sel_pm_device: usb-sw-sel-pm-device { |
|
pins = "gpio4"; |
|
function = PMIC_GPIO_FUNC_NORMAL; |
|
|
|
power-source = <PM8916_GPIO_VPH>; |
|
input-disable; |
|
output-low; |
|
}; |
|
|
|
pm8916_gpios_leds: pm8916-gpios-leds { |
|
pins = "gpio1", "gpio2"; |
|
function = PMIC_GPIO_FUNC_NORMAL; |
|
|
|
output-low; |
|
}; |
|
}; |
|
|
|
&pm8916_mpps { |
|
gpio-line-names = |
|
"VDD_PX_BIAS", |
|
"WLAN_LED_CTRL", |
|
"BT_LED_CTRL", |
|
"GPIO-F"; /* LS_EXP_GPIO_F, LSEC pin 28 */ |
|
|
|
pinctrl-names = "default"; |
|
pinctrl-0 = <&ls_exp_gpio_f>; |
|
|
|
ls_exp_gpio_f: pm8916-mpp4 { |
|
pins = "mpp4"; |
|
function = "digital"; |
|
|
|
output-low; |
|
power-source = <PM8916_MPP_L5>; // 1.8V |
|
}; |
|
|
|
pm8916_mpps_leds: pm8916-mpps-leds { |
|
pins = "mpp2", "mpp3"; |
|
function = "digital"; |
|
|
|
output-low; |
|
}; |
|
};
|
|
|