forked from Qortal/Brooklyn
7d3018da4c
* NVME, SATA NAND Security added * Qortal Core exception fetcher is now redone. * Update DT overlays for firmware * Fix for bvb clockj settings * Fix for no audio for sissy desktop porn watchers -_- ( thanks crowetic for watching gay porn and reporting me that bug asshat ) * Normalize the fetch() stream while doing a peer to peer handshake for nodes * Fix for RNG token editing error while performing a SHA256 encryption * Now under voltage errors will blink red led constantly for 5 minutes then go solid. * Improve kernel thread scaling for Qortal 2.0 core * HDMI circuit is now enabled at power up instead. * Added KMS * Added line replication instead of interpolation for VC4 GPU resulting in slightly better frame rates * Fix for long and doubles * Backplane clock is now set at standard rate * Capped HVEC clocks * Add support for Creative Cinema webcam for donkers who like sharing dick pics. *looks at crowetic* * More scanline XGA modes for people who have weird ass monitors of all sorts. * TX/RX flow control support is now 100% stable. No lags over 1Gbps ethernet. ( Hello Qortal 3.0 ) * Using flush cache instead of fetch for QC 2.0 resulting in performance gains * VC4 clock is now enforced for desktop oriented images. * Ondemand governor now waits for 2 seconds instead of 0.5ms to scale down to the lowest safest clock freq preventing lags to the core. * Timeout of OC set at 35ms from 90ms resulting in way better clocks and sync for Qortal 2.0 core
118 lines
3.8 KiB
C
118 lines
3.8 KiB
C
/* SPDX-License-Identifier: GPL-2.0-only */
|
|
/* Copyright (c) 2010-2015, 2018-2019 The Linux Foundation. All rights reserved.
|
|
* Copyright (C) 2015 Linaro Ltd.
|
|
*/
|
|
#ifndef __QCOM_SCM_H
|
|
#define __QCOM_SCM_H
|
|
|
|
#include <linux/err.h>
|
|
#include <linux/types.h>
|
|
#include <linux/cpumask.h>
|
|
|
|
#define QCOM_SCM_VERSION(major, minor) (((major) << 16) | ((minor) & 0xFF))
|
|
#define QCOM_SCM_CPU_PWR_DOWN_L2_ON 0x0
|
|
#define QCOM_SCM_CPU_PWR_DOWN_L2_OFF 0x1
|
|
#define QCOM_SCM_HDCP_MAX_REQ_CNT 5
|
|
|
|
struct qcom_scm_hdcp_req {
|
|
u32 addr;
|
|
u32 val;
|
|
};
|
|
|
|
struct qcom_scm_vmperm {
|
|
int vmid;
|
|
int perm;
|
|
};
|
|
|
|
enum qcom_scm_ocmem_client {
|
|
QCOM_SCM_OCMEM_UNUSED_ID = 0x0,
|
|
QCOM_SCM_OCMEM_GRAPHICS_ID,
|
|
QCOM_SCM_OCMEM_VIDEO_ID,
|
|
QCOM_SCM_OCMEM_LP_AUDIO_ID,
|
|
QCOM_SCM_OCMEM_SENSORS_ID,
|
|
QCOM_SCM_OCMEM_OTHER_OS_ID,
|
|
QCOM_SCM_OCMEM_DEBUG_ID,
|
|
};
|
|
|
|
enum qcom_scm_sec_dev_id {
|
|
QCOM_SCM_MDSS_DEV_ID = 1,
|
|
QCOM_SCM_OCMEM_DEV_ID = 5,
|
|
QCOM_SCM_PCIE0_DEV_ID = 11,
|
|
QCOM_SCM_PCIE1_DEV_ID = 12,
|
|
QCOM_SCM_GFX_DEV_ID = 18,
|
|
QCOM_SCM_UFS_DEV_ID = 19,
|
|
QCOM_SCM_ICE_DEV_ID = 20,
|
|
};
|
|
|
|
enum qcom_scm_ice_cipher {
|
|
QCOM_SCM_ICE_CIPHER_AES_128_XTS = 0,
|
|
QCOM_SCM_ICE_CIPHER_AES_128_CBC = 1,
|
|
QCOM_SCM_ICE_CIPHER_AES_256_XTS = 3,
|
|
QCOM_SCM_ICE_CIPHER_AES_256_CBC = 4,
|
|
};
|
|
|
|
#define QCOM_SCM_VMID_HLOS 0x3
|
|
#define QCOM_SCM_VMID_MSS_MSA 0xF
|
|
#define QCOM_SCM_VMID_WLAN 0x18
|
|
#define QCOM_SCM_VMID_WLAN_CE 0x19
|
|
#define QCOM_SCM_PERM_READ 0x4
|
|
#define QCOM_SCM_PERM_WRITE 0x2
|
|
#define QCOM_SCM_PERM_EXEC 0x1
|
|
#define QCOM_SCM_PERM_RW (QCOM_SCM_PERM_READ | QCOM_SCM_PERM_WRITE)
|
|
#define QCOM_SCM_PERM_RWX (QCOM_SCM_PERM_RW | QCOM_SCM_PERM_EXEC)
|
|
|
|
extern bool qcom_scm_is_available(void);
|
|
|
|
extern int qcom_scm_set_cold_boot_addr(void *entry, const cpumask_t *cpus);
|
|
extern int qcom_scm_set_warm_boot_addr(void *entry, const cpumask_t *cpus);
|
|
extern void qcom_scm_cpu_power_down(u32 flags);
|
|
extern int qcom_scm_set_remote_state(u32 state, u32 id);
|
|
|
|
extern int qcom_scm_pas_init_image(u32 peripheral, const void *metadata,
|
|
size_t size);
|
|
extern int qcom_scm_pas_mem_setup(u32 peripheral, phys_addr_t addr,
|
|
phys_addr_t size);
|
|
extern int qcom_scm_pas_auth_and_reset(u32 peripheral);
|
|
extern int qcom_scm_pas_shutdown(u32 peripheral);
|
|
extern bool qcom_scm_pas_supported(u32 peripheral);
|
|
|
|
extern int qcom_scm_io_readl(phys_addr_t addr, unsigned int *val);
|
|
extern int qcom_scm_io_writel(phys_addr_t addr, unsigned int val);
|
|
|
|
extern bool qcom_scm_restore_sec_cfg_available(void);
|
|
extern int qcom_scm_restore_sec_cfg(u32 device_id, u32 spare);
|
|
extern int qcom_scm_iommu_secure_ptbl_size(u32 spare, size_t *size);
|
|
extern int qcom_scm_iommu_secure_ptbl_init(u64 addr, u32 size, u32 spare);
|
|
extern int qcom_scm_mem_protect_video_var(u32 cp_start, u32 cp_size,
|
|
u32 cp_nonpixel_start,
|
|
u32 cp_nonpixel_size);
|
|
extern int qcom_scm_assign_mem(phys_addr_t mem_addr, size_t mem_sz,
|
|
unsigned int *src,
|
|
const struct qcom_scm_vmperm *newvm,
|
|
unsigned int dest_cnt);
|
|
|
|
extern bool qcom_scm_ocmem_lock_available(void);
|
|
extern int qcom_scm_ocmem_lock(enum qcom_scm_ocmem_client id, u32 offset,
|
|
u32 size, u32 mode);
|
|
extern int qcom_scm_ocmem_unlock(enum qcom_scm_ocmem_client id, u32 offset,
|
|
u32 size);
|
|
|
|
extern bool qcom_scm_ice_available(void);
|
|
extern int qcom_scm_ice_invalidate_key(u32 index);
|
|
extern int qcom_scm_ice_set_key(u32 index, const u8 *key, u32 key_size,
|
|
enum qcom_scm_ice_cipher cipher,
|
|
u32 data_unit_size);
|
|
|
|
extern bool qcom_scm_hdcp_available(void);
|
|
extern int qcom_scm_hdcp_req(struct qcom_scm_hdcp_req *req, u32 req_cnt,
|
|
u32 *resp);
|
|
|
|
extern int qcom_scm_qsmmu500_wait_safe_toggle(bool en);
|
|
|
|
extern int qcom_scm_lmh_dcvsh(u32 payload_fn, u32 payload_reg, u32 payload_val,
|
|
u64 limit_node, u32 node_id, u64 version);
|
|
extern int qcom_scm_lmh_profile_change(u32 profile_id);
|
|
extern bool qcom_scm_lmh_dcvsh_available(void);
|
|
|
|
#endif
|