forked from Qortal/Brooklyn
You can not select more than 25 topics
Topics must start with a letter or number, can include dashes ('-') and can be up to 35 characters long.
758 lines
19 KiB
758 lines
19 KiB
// SPDX-License-Identifier: GPL-2.0+ |
|
/* |
|
* Driver for Datafab USB Compact Flash reader |
|
* |
|
* datafab driver v0.1: |
|
* |
|
* First release |
|
* |
|
* Current development and maintenance by: |
|
* (c) 2000 Jimmie Mayfield ([email protected]) |
|
* |
|
* Many thanks to Robert Baruch for the SanDisk SmartMedia reader driver |
|
* which I used as a template for this driver. |
|
* |
|
* Some bugfixes and scatter-gather code by Gregory P. Smith |
|
* ([email protected]) |
|
* |
|
* Fix for media change by Joerg Schneider ([email protected]) |
|
* |
|
* Other contributors: |
|
* (c) 2002 Alan Stern <[email protected]> |
|
*/ |
|
|
|
/* |
|
* This driver attempts to support USB CompactFlash reader/writer devices |
|
* based on Datafab USB-to-ATA chips. It was specifically developed for the |
|
* Datafab MDCFE-B USB CompactFlash reader but has since been found to work |
|
* with a variety of Datafab-based devices from a number of manufacturers. |
|
* I've received a report of this driver working with a Datafab-based |
|
* SmartMedia device though please be aware that I'm personally unable to |
|
* test SmartMedia support. |
|
* |
|
* This driver supports reading and writing. If you're truly paranoid, |
|
* however, you can force the driver into a write-protected state by setting |
|
* the WP enable bits in datafab_handle_mode_sense(). See the comments |
|
* in that routine. |
|
*/ |
|
|
|
#include <linux/errno.h> |
|
#include <linux/module.h> |
|
#include <linux/slab.h> |
|
|
|
#include <scsi/scsi.h> |
|
#include <scsi/scsi_cmnd.h> |
|
|
|
#include "usb.h" |
|
#include "transport.h" |
|
#include "protocol.h" |
|
#include "debug.h" |
|
#include "scsiglue.h" |
|
|
|
#define DRV_NAME "ums-datafab" |
|
|
|
MODULE_DESCRIPTION("Driver for Datafab USB Compact Flash reader"); |
|
MODULE_AUTHOR("Jimmie Mayfield <[email protected]>"); |
|
MODULE_LICENSE("GPL"); |
|
MODULE_IMPORT_NS(USB_STORAGE); |
|
|
|
struct datafab_info { |
|
unsigned long sectors; /* total sector count */ |
|
unsigned long ssize; /* sector size in bytes */ |
|
signed char lun; /* used for dual-slot readers */ |
|
|
|
/* the following aren't used yet */ |
|
unsigned char sense_key; |
|
unsigned long sense_asc; /* additional sense code */ |
|
unsigned long sense_ascq; /* additional sense code qualifier */ |
|
}; |
|
|
|
static int datafab_determine_lun(struct us_data *us, |
|
struct datafab_info *info); |
|
|
|
|
|
/* |
|
* The table of devices |
|
*/ |
|
#define UNUSUAL_DEV(id_vendor, id_product, bcdDeviceMin, bcdDeviceMax, \ |
|
vendorName, productName, useProtocol, useTransport, \ |
|
initFunction, flags) \ |
|
{ USB_DEVICE_VER(id_vendor, id_product, bcdDeviceMin, bcdDeviceMax), \ |
|
.driver_info = (flags) } |
|
|
|
static struct usb_device_id datafab_usb_ids[] = { |
|
# include "unusual_datafab.h" |
|
{ } /* Terminating entry */ |
|
}; |
|
MODULE_DEVICE_TABLE(usb, datafab_usb_ids); |
|
|
|
#undef UNUSUAL_DEV |
|
|
|
/* |
|
* The flags table |
|
*/ |
|
#define UNUSUAL_DEV(idVendor, idProduct, bcdDeviceMin, bcdDeviceMax, \ |
|
vendor_name, product_name, use_protocol, use_transport, \ |
|
init_function, Flags) \ |
|
{ \ |
|
.vendorName = vendor_name, \ |
|
.productName = product_name, \ |
|
.useProtocol = use_protocol, \ |
|
.useTransport = use_transport, \ |
|
.initFunction = init_function, \ |
|
} |
|
|
|
static struct us_unusual_dev datafab_unusual_dev_list[] = { |
|
# include "unusual_datafab.h" |
|
{ } /* Terminating entry */ |
|
}; |
|
|
|
#undef UNUSUAL_DEV |
|
|
|
|
|
static inline int |
|
datafab_bulk_read(struct us_data *us, unsigned char *data, unsigned int len) { |
|
if (len == 0) |
|
return USB_STOR_XFER_GOOD; |
|
|
|
usb_stor_dbg(us, "len = %d\n", len); |
|
return usb_stor_bulk_transfer_buf(us, us->recv_bulk_pipe, |
|
data, len, NULL); |
|
} |
|
|
|
|
|
static inline int |
|
datafab_bulk_write(struct us_data *us, unsigned char *data, unsigned int len) { |
|
if (len == 0) |
|
return USB_STOR_XFER_GOOD; |
|
|
|
usb_stor_dbg(us, "len = %d\n", len); |
|
return usb_stor_bulk_transfer_buf(us, us->send_bulk_pipe, |
|
data, len, NULL); |
|
} |
|
|
|
|
|
static int datafab_read_data(struct us_data *us, |
|
struct datafab_info *info, |
|
u32 sector, |
|
u32 sectors) |
|
{ |
|
unsigned char *command = us->iobuf; |
|
unsigned char *buffer; |
|
unsigned char thistime; |
|
unsigned int totallen, alloclen; |
|
int len, result; |
|
unsigned int sg_offset = 0; |
|
struct scatterlist *sg = NULL; |
|
|
|
// we're working in LBA mode. according to the ATA spec, |
|
// we can support up to 28-bit addressing. I don't know if Datafab |
|
// supports beyond 24-bit addressing. It's kind of hard to test |
|
// since it requires > 8GB CF card. |
|
// |
|
if (sectors > 0x0FFFFFFF) |
|
return USB_STOR_TRANSPORT_ERROR; |
|
|
|
if (info->lun == -1) { |
|
result = datafab_determine_lun(us, info); |
|
if (result != USB_STOR_TRANSPORT_GOOD) |
|
return result; |
|
} |
|
|
|
totallen = sectors * info->ssize; |
|
|
|
// Since we don't read more than 64 KB at a time, we have to create |
|
// a bounce buffer and move the data a piece at a time between the |
|
// bounce buffer and the actual transfer buffer. |
|
|
|
alloclen = min(totallen, 65536u); |
|
buffer = kmalloc(alloclen, GFP_NOIO); |
|
if (buffer == NULL) |
|
return USB_STOR_TRANSPORT_ERROR; |
|
|
|
do { |
|
// loop, never allocate or transfer more than 64k at once |
|
// (min(128k, 255*info->ssize) is the real limit) |
|
|
|
len = min(totallen, alloclen); |
|
thistime = (len / info->ssize) & 0xff; |
|
|
|
command[0] = 0; |
|
command[1] = thistime; |
|
command[2] = sector & 0xFF; |
|
command[3] = (sector >> 8) & 0xFF; |
|
command[4] = (sector >> 16) & 0xFF; |
|
|
|
command[5] = 0xE0 + (info->lun << 4); |
|
command[5] |= (sector >> 24) & 0x0F; |
|
command[6] = 0x20; |
|
command[7] = 0x01; |
|
|
|
// send the read command |
|
result = datafab_bulk_write(us, command, 8); |
|
if (result != USB_STOR_XFER_GOOD) |
|
goto leave; |
|
|
|
// read the result |
|
result = datafab_bulk_read(us, buffer, len); |
|
if (result != USB_STOR_XFER_GOOD) |
|
goto leave; |
|
|
|
// Store the data in the transfer buffer |
|
usb_stor_access_xfer_buf(buffer, len, us->srb, |
|
&sg, &sg_offset, TO_XFER_BUF); |
|
|
|
sector += thistime; |
|
totallen -= len; |
|
} while (totallen > 0); |
|
|
|
kfree(buffer); |
|
return USB_STOR_TRANSPORT_GOOD; |
|
|
|
leave: |
|
kfree(buffer); |
|
return USB_STOR_TRANSPORT_ERROR; |
|
} |
|
|
|
|
|
static int datafab_write_data(struct us_data *us, |
|
struct datafab_info *info, |
|
u32 sector, |
|
u32 sectors) |
|
{ |
|
unsigned char *command = us->iobuf; |
|
unsigned char *reply = us->iobuf; |
|
unsigned char *buffer; |
|
unsigned char thistime; |
|
unsigned int totallen, alloclen; |
|
int len, result; |
|
unsigned int sg_offset = 0; |
|
struct scatterlist *sg = NULL; |
|
|
|
// we're working in LBA mode. according to the ATA spec, |
|
// we can support up to 28-bit addressing. I don't know if Datafab |
|
// supports beyond 24-bit addressing. It's kind of hard to test |
|
// since it requires > 8GB CF card. |
|
// |
|
if (sectors > 0x0FFFFFFF) |
|
return USB_STOR_TRANSPORT_ERROR; |
|
|
|
if (info->lun == -1) { |
|
result = datafab_determine_lun(us, info); |
|
if (result != USB_STOR_TRANSPORT_GOOD) |
|
return result; |
|
} |
|
|
|
totallen = sectors * info->ssize; |
|
|
|
// Since we don't write more than 64 KB at a time, we have to create |
|
// a bounce buffer and move the data a piece at a time between the |
|
// bounce buffer and the actual transfer buffer. |
|
|
|
alloclen = min(totallen, 65536u); |
|
buffer = kmalloc(alloclen, GFP_NOIO); |
|
if (buffer == NULL) |
|
return USB_STOR_TRANSPORT_ERROR; |
|
|
|
do { |
|
// loop, never allocate or transfer more than 64k at once |
|
// (min(128k, 255*info->ssize) is the real limit) |
|
|
|
len = min(totallen, alloclen); |
|
thistime = (len / info->ssize) & 0xff; |
|
|
|
// Get the data from the transfer buffer |
|
usb_stor_access_xfer_buf(buffer, len, us->srb, |
|
&sg, &sg_offset, FROM_XFER_BUF); |
|
|
|
command[0] = 0; |
|
command[1] = thistime; |
|
command[2] = sector & 0xFF; |
|
command[3] = (sector >> 8) & 0xFF; |
|
command[4] = (sector >> 16) & 0xFF; |
|
|
|
command[5] = 0xE0 + (info->lun << 4); |
|
command[5] |= (sector >> 24) & 0x0F; |
|
command[6] = 0x30; |
|
command[7] = 0x02; |
|
|
|
// send the command |
|
result = datafab_bulk_write(us, command, 8); |
|
if (result != USB_STOR_XFER_GOOD) |
|
goto leave; |
|
|
|
// send the data |
|
result = datafab_bulk_write(us, buffer, len); |
|
if (result != USB_STOR_XFER_GOOD) |
|
goto leave; |
|
|
|
// read the result |
|
result = datafab_bulk_read(us, reply, 2); |
|
if (result != USB_STOR_XFER_GOOD) |
|
goto leave; |
|
|
|
if (reply[0] != 0x50 && reply[1] != 0) { |
|
usb_stor_dbg(us, "Gah! write return code: %02x %02x\n", |
|
reply[0], reply[1]); |
|
result = USB_STOR_TRANSPORT_ERROR; |
|
goto leave; |
|
} |
|
|
|
sector += thistime; |
|
totallen -= len; |
|
} while (totallen > 0); |
|
|
|
kfree(buffer); |
|
return USB_STOR_TRANSPORT_GOOD; |
|
|
|
leave: |
|
kfree(buffer); |
|
return USB_STOR_TRANSPORT_ERROR; |
|
} |
|
|
|
|
|
static int datafab_determine_lun(struct us_data *us, |
|
struct datafab_info *info) |
|
{ |
|
// Dual-slot readers can be thought of as dual-LUN devices. |
|
// We need to determine which card slot is being used. |
|
// We'll send an IDENTIFY DEVICE command and see which LUN responds... |
|
// |
|
// There might be a better way of doing this? |
|
|
|
static unsigned char scommand[8] = { 0, 1, 0, 0, 0, 0xa0, 0xec, 1 }; |
|
unsigned char *command = us->iobuf; |
|
unsigned char *buf; |
|
int count = 0, rc; |
|
|
|
if (!info) |
|
return USB_STOR_TRANSPORT_ERROR; |
|
|
|
memcpy(command, scommand, 8); |
|
buf = kmalloc(512, GFP_NOIO); |
|
if (!buf) |
|
return USB_STOR_TRANSPORT_ERROR; |
|
|
|
usb_stor_dbg(us, "locating...\n"); |
|
|
|
// we'll try 3 times before giving up... |
|
// |
|
while (count++ < 3) { |
|
command[5] = 0xa0; |
|
|
|
rc = datafab_bulk_write(us, command, 8); |
|
if (rc != USB_STOR_XFER_GOOD) { |
|
rc = USB_STOR_TRANSPORT_ERROR; |
|
goto leave; |
|
} |
|
|
|
rc = datafab_bulk_read(us, buf, 512); |
|
if (rc == USB_STOR_XFER_GOOD) { |
|
info->lun = 0; |
|
rc = USB_STOR_TRANSPORT_GOOD; |
|
goto leave; |
|
} |
|
|
|
command[5] = 0xb0; |
|
|
|
rc = datafab_bulk_write(us, command, 8); |
|
if (rc != USB_STOR_XFER_GOOD) { |
|
rc = USB_STOR_TRANSPORT_ERROR; |
|
goto leave; |
|
} |
|
|
|
rc = datafab_bulk_read(us, buf, 512); |
|
if (rc == USB_STOR_XFER_GOOD) { |
|
info->lun = 1; |
|
rc = USB_STOR_TRANSPORT_GOOD; |
|
goto leave; |
|
} |
|
|
|
msleep(20); |
|
} |
|
|
|
rc = USB_STOR_TRANSPORT_ERROR; |
|
|
|
leave: |
|
kfree(buf); |
|
return rc; |
|
} |
|
|
|
static int datafab_id_device(struct us_data *us, |
|
struct datafab_info *info) |
|
{ |
|
// this is a variation of the ATA "IDENTIFY DEVICE" command...according |
|
// to the ATA spec, 'Sector Count' isn't used but the Windows driver |
|
// sets this bit so we do too... |
|
// |
|
static unsigned char scommand[8] = { 0, 1, 0, 0, 0, 0xa0, 0xec, 1 }; |
|
unsigned char *command = us->iobuf; |
|
unsigned char *reply; |
|
int rc; |
|
|
|
if (!info) |
|
return USB_STOR_TRANSPORT_ERROR; |
|
|
|
if (info->lun == -1) { |
|
rc = datafab_determine_lun(us, info); |
|
if (rc != USB_STOR_TRANSPORT_GOOD) |
|
return rc; |
|
} |
|
|
|
memcpy(command, scommand, 8); |
|
reply = kmalloc(512, GFP_NOIO); |
|
if (!reply) |
|
return USB_STOR_TRANSPORT_ERROR; |
|
|
|
command[5] += (info->lun << 4); |
|
|
|
rc = datafab_bulk_write(us, command, 8); |
|
if (rc != USB_STOR_XFER_GOOD) { |
|
rc = USB_STOR_TRANSPORT_ERROR; |
|
goto leave; |
|
} |
|
|
|
// we'll go ahead and extract the media capacity while we're here... |
|
// |
|
rc = datafab_bulk_read(us, reply, 512); |
|
if (rc == USB_STOR_XFER_GOOD) { |
|
// capacity is at word offset 57-58 |
|
// |
|
info->sectors = ((u32)(reply[117]) << 24) | |
|
((u32)(reply[116]) << 16) | |
|
((u32)(reply[115]) << 8) | |
|
((u32)(reply[114]) ); |
|
rc = USB_STOR_TRANSPORT_GOOD; |
|
goto leave; |
|
} |
|
|
|
rc = USB_STOR_TRANSPORT_ERROR; |
|
|
|
leave: |
|
kfree(reply); |
|
return rc; |
|
} |
|
|
|
|
|
static int datafab_handle_mode_sense(struct us_data *us, |
|
struct scsi_cmnd * srb, |
|
int sense_6) |
|
{ |
|
static unsigned char rw_err_page[12] = { |
|
0x1, 0xA, 0x21, 1, 0, 0, 0, 0, 1, 0, 0, 0 |
|
}; |
|
static unsigned char cache_page[12] = { |
|
0x8, 0xA, 0x1, 0, 0, 0, 0, 0, 0, 0, 0, 0 |
|
}; |
|
static unsigned char rbac_page[12] = { |
|
0x1B, 0xA, 0, 0x81, 0, 0, 0, 0, 0, 0, 0, 0 |
|
}; |
|
static unsigned char timer_page[8] = { |
|
0x1C, 0x6, 0, 0, 0, 0 |
|
}; |
|
unsigned char pc, page_code; |
|
unsigned int i = 0; |
|
struct datafab_info *info = (struct datafab_info *) (us->extra); |
|
unsigned char *ptr = us->iobuf; |
|
|
|
// most of this stuff is just a hack to get things working. the |
|
// datafab reader doesn't present a SCSI interface so we |
|
// fudge the SCSI commands... |
|
// |
|
|
|
pc = srb->cmnd[2] >> 6; |
|
page_code = srb->cmnd[2] & 0x3F; |
|
|
|
switch (pc) { |
|
case 0x0: |
|
usb_stor_dbg(us, "Current values\n"); |
|
break; |
|
case 0x1: |
|
usb_stor_dbg(us, "Changeable values\n"); |
|
break; |
|
case 0x2: |
|
usb_stor_dbg(us, "Default values\n"); |
|
break; |
|
case 0x3: |
|
usb_stor_dbg(us, "Saves values\n"); |
|
break; |
|
} |
|
|
|
memset(ptr, 0, 8); |
|
if (sense_6) { |
|
ptr[2] = 0x00; // WP enable: 0x80 |
|
i = 4; |
|
} else { |
|
ptr[3] = 0x00; // WP enable: 0x80 |
|
i = 8; |
|
} |
|
|
|
switch (page_code) { |
|
default: |
|
// vendor-specific mode |
|
info->sense_key = 0x05; |
|
info->sense_asc = 0x24; |
|
info->sense_ascq = 0x00; |
|
return USB_STOR_TRANSPORT_FAILED; |
|
|
|
case 0x1: |
|
memcpy(ptr + i, rw_err_page, sizeof(rw_err_page)); |
|
i += sizeof(rw_err_page); |
|
break; |
|
|
|
case 0x8: |
|
memcpy(ptr + i, cache_page, sizeof(cache_page)); |
|
i += sizeof(cache_page); |
|
break; |
|
|
|
case 0x1B: |
|
memcpy(ptr + i, rbac_page, sizeof(rbac_page)); |
|
i += sizeof(rbac_page); |
|
break; |
|
|
|
case 0x1C: |
|
memcpy(ptr + i, timer_page, sizeof(timer_page)); |
|
i += sizeof(timer_page); |
|
break; |
|
|
|
case 0x3F: // retrieve all pages |
|
memcpy(ptr + i, timer_page, sizeof(timer_page)); |
|
i += sizeof(timer_page); |
|
memcpy(ptr + i, rbac_page, sizeof(rbac_page)); |
|
i += sizeof(rbac_page); |
|
memcpy(ptr + i, cache_page, sizeof(cache_page)); |
|
i += sizeof(cache_page); |
|
memcpy(ptr + i, rw_err_page, sizeof(rw_err_page)); |
|
i += sizeof(rw_err_page); |
|
break; |
|
} |
|
|
|
if (sense_6) |
|
ptr[0] = i - 1; |
|
else |
|
((__be16 *) ptr)[0] = cpu_to_be16(i - 2); |
|
usb_stor_set_xfer_buf(ptr, i, srb); |
|
|
|
return USB_STOR_TRANSPORT_GOOD; |
|
} |
|
|
|
static void datafab_info_destructor(void *extra) |
|
{ |
|
// this routine is a placeholder... |
|
// currently, we don't allocate any extra memory so we're okay |
|
} |
|
|
|
|
|
// Transport for the Datafab MDCFE-B |
|
// |
|
static int datafab_transport(struct scsi_cmnd *srb, struct us_data *us) |
|
{ |
|
struct datafab_info *info; |
|
int rc; |
|
unsigned long block, blocks; |
|
unsigned char *ptr = us->iobuf; |
|
static unsigned char inquiry_reply[8] = { |
|
0x00, 0x80, 0x00, 0x01, 0x1F, 0x00, 0x00, 0x00 |
|
}; |
|
|
|
if (!us->extra) { |
|
us->extra = kzalloc(sizeof(struct datafab_info), GFP_NOIO); |
|
if (!us->extra) |
|
return USB_STOR_TRANSPORT_ERROR; |
|
|
|
us->extra_destructor = datafab_info_destructor; |
|
((struct datafab_info *)us->extra)->lun = -1; |
|
} |
|
|
|
info = (struct datafab_info *) (us->extra); |
|
|
|
if (srb->cmnd[0] == INQUIRY) { |
|
usb_stor_dbg(us, "INQUIRY - Returning bogus response\n"); |
|
memcpy(ptr, inquiry_reply, sizeof(inquiry_reply)); |
|
fill_inquiry_response(us, ptr, 36); |
|
return USB_STOR_TRANSPORT_GOOD; |
|
} |
|
|
|
if (srb->cmnd[0] == READ_CAPACITY) { |
|
info->ssize = 0x200; // hard coded 512 byte sectors as per ATA spec |
|
rc = datafab_id_device(us, info); |
|
if (rc != USB_STOR_TRANSPORT_GOOD) |
|
return rc; |
|
|
|
usb_stor_dbg(us, "READ_CAPACITY: %ld sectors, %ld bytes per sector\n", |
|
info->sectors, info->ssize); |
|
|
|
// build the reply |
|
// we need the last sector, not the number of sectors |
|
((__be32 *) ptr)[0] = cpu_to_be32(info->sectors - 1); |
|
((__be32 *) ptr)[1] = cpu_to_be32(info->ssize); |
|
usb_stor_set_xfer_buf(ptr, 8, srb); |
|
|
|
return USB_STOR_TRANSPORT_GOOD; |
|
} |
|
|
|
if (srb->cmnd[0] == MODE_SELECT_10) { |
|
usb_stor_dbg(us, "Gah! MODE_SELECT_10\n"); |
|
return USB_STOR_TRANSPORT_ERROR; |
|
} |
|
|
|
// don't bother implementing READ_6 or WRITE_6. |
|
// |
|
if (srb->cmnd[0] == READ_10) { |
|
block = ((u32)(srb->cmnd[2]) << 24) | ((u32)(srb->cmnd[3]) << 16) | |
|
((u32)(srb->cmnd[4]) << 8) | ((u32)(srb->cmnd[5])); |
|
|
|
blocks = ((u32)(srb->cmnd[7]) << 8) | ((u32)(srb->cmnd[8])); |
|
|
|
usb_stor_dbg(us, "READ_10: read block 0x%04lx count %ld\n", |
|
block, blocks); |
|
return datafab_read_data(us, info, block, blocks); |
|
} |
|
|
|
if (srb->cmnd[0] == READ_12) { |
|
// we'll probably never see a READ_12 but we'll do it anyway... |
|
// |
|
block = ((u32)(srb->cmnd[2]) << 24) | ((u32)(srb->cmnd[3]) << 16) | |
|
((u32)(srb->cmnd[4]) << 8) | ((u32)(srb->cmnd[5])); |
|
|
|
blocks = ((u32)(srb->cmnd[6]) << 24) | ((u32)(srb->cmnd[7]) << 16) | |
|
((u32)(srb->cmnd[8]) << 8) | ((u32)(srb->cmnd[9])); |
|
|
|
usb_stor_dbg(us, "READ_12: read block 0x%04lx count %ld\n", |
|
block, blocks); |
|
return datafab_read_data(us, info, block, blocks); |
|
} |
|
|
|
if (srb->cmnd[0] == WRITE_10) { |
|
block = ((u32)(srb->cmnd[2]) << 24) | ((u32)(srb->cmnd[3]) << 16) | |
|
((u32)(srb->cmnd[4]) << 8) | ((u32)(srb->cmnd[5])); |
|
|
|
blocks = ((u32)(srb->cmnd[7]) << 8) | ((u32)(srb->cmnd[8])); |
|
|
|
usb_stor_dbg(us, "WRITE_10: write block 0x%04lx count %ld\n", |
|
block, blocks); |
|
return datafab_write_data(us, info, block, blocks); |
|
} |
|
|
|
if (srb->cmnd[0] == WRITE_12) { |
|
// we'll probably never see a WRITE_12 but we'll do it anyway... |
|
// |
|
block = ((u32)(srb->cmnd[2]) << 24) | ((u32)(srb->cmnd[3]) << 16) | |
|
((u32)(srb->cmnd[4]) << 8) | ((u32)(srb->cmnd[5])); |
|
|
|
blocks = ((u32)(srb->cmnd[6]) << 24) | ((u32)(srb->cmnd[7]) << 16) | |
|
((u32)(srb->cmnd[8]) << 8) | ((u32)(srb->cmnd[9])); |
|
|
|
usb_stor_dbg(us, "WRITE_12: write block 0x%04lx count %ld\n", |
|
block, blocks); |
|
return datafab_write_data(us, info, block, blocks); |
|
} |
|
|
|
if (srb->cmnd[0] == TEST_UNIT_READY) { |
|
usb_stor_dbg(us, "TEST_UNIT_READY\n"); |
|
return datafab_id_device(us, info); |
|
} |
|
|
|
if (srb->cmnd[0] == REQUEST_SENSE) { |
|
usb_stor_dbg(us, "REQUEST_SENSE - Returning faked response\n"); |
|
|
|
// this response is pretty bogus right now. eventually if necessary |
|
// we can set the correct sense data. so far though it hasn't been |
|
// necessary |
|
// |
|
memset(ptr, 0, 18); |
|
ptr[0] = 0xF0; |
|
ptr[2] = info->sense_key; |
|
ptr[7] = 11; |
|
ptr[12] = info->sense_asc; |
|
ptr[13] = info->sense_ascq; |
|
usb_stor_set_xfer_buf(ptr, 18, srb); |
|
|
|
return USB_STOR_TRANSPORT_GOOD; |
|
} |
|
|
|
if (srb->cmnd[0] == MODE_SENSE) { |
|
usb_stor_dbg(us, "MODE_SENSE_6 detected\n"); |
|
return datafab_handle_mode_sense(us, srb, 1); |
|
} |
|
|
|
if (srb->cmnd[0] == MODE_SENSE_10) { |
|
usb_stor_dbg(us, "MODE_SENSE_10 detected\n"); |
|
return datafab_handle_mode_sense(us, srb, 0); |
|
} |
|
|
|
if (srb->cmnd[0] == ALLOW_MEDIUM_REMOVAL) { |
|
/* |
|
* sure. whatever. not like we can stop the user from |
|
* popping the media out of the device (no locking doors, etc) |
|
*/ |
|
return USB_STOR_TRANSPORT_GOOD; |
|
} |
|
|
|
if (srb->cmnd[0] == START_STOP) { |
|
/* |
|
* this is used by sd.c'check_scsidisk_media_change to detect |
|
* media change |
|
*/ |
|
usb_stor_dbg(us, "START_STOP\n"); |
|
/* |
|
* the first datafab_id_device after a media change returns |
|
* an error (determined experimentally) |
|
*/ |
|
rc = datafab_id_device(us, info); |
|
if (rc == USB_STOR_TRANSPORT_GOOD) { |
|
info->sense_key = NO_SENSE; |
|
srb->result = SUCCESS; |
|
} else { |
|
info->sense_key = UNIT_ATTENTION; |
|
srb->result = SAM_STAT_CHECK_CONDITION; |
|
} |
|
return rc; |
|
} |
|
|
|
usb_stor_dbg(us, "Gah! Unknown command: %d (0x%x)\n", |
|
srb->cmnd[0], srb->cmnd[0]); |
|
info->sense_key = 0x05; |
|
info->sense_asc = 0x20; |
|
info->sense_ascq = 0x00; |
|
return USB_STOR_TRANSPORT_FAILED; |
|
} |
|
|
|
static struct scsi_host_template datafab_host_template; |
|
|
|
static int datafab_probe(struct usb_interface *intf, |
|
const struct usb_device_id *id) |
|
{ |
|
struct us_data *us; |
|
int result; |
|
|
|
result = usb_stor_probe1(&us, intf, id, |
|
(id - datafab_usb_ids) + datafab_unusual_dev_list, |
|
&datafab_host_template); |
|
if (result) |
|
return result; |
|
|
|
us->transport_name = "Datafab Bulk-Only"; |
|
us->transport = datafab_transport; |
|
us->transport_reset = usb_stor_Bulk_reset; |
|
us->max_lun = 1; |
|
|
|
result = usb_stor_probe2(us); |
|
return result; |
|
} |
|
|
|
static struct usb_driver datafab_driver = { |
|
.name = DRV_NAME, |
|
.probe = datafab_probe, |
|
.disconnect = usb_stor_disconnect, |
|
.suspend = usb_stor_suspend, |
|
.resume = usb_stor_resume, |
|
.reset_resume = usb_stor_reset_resume, |
|
.pre_reset = usb_stor_pre_reset, |
|
.post_reset = usb_stor_post_reset, |
|
.id_table = datafab_usb_ids, |
|
.soft_unbind = 1, |
|
.no_dynamic_id = 1, |
|
}; |
|
|
|
module_usb_stor_driver(datafab_driver, datafab_host_template, DRV_NAME);
|
|
|