forked from Qortal/Brooklyn
You can not select more than 25 topics
Topics must start with a letter or number, can include dashes ('-') and can be up to 35 characters long.
250 lines
6.3 KiB
250 lines
6.3 KiB
/* SPDX-License-Identifier: GPL-2.0 */ |
|
/* |
|
* SL811HS register declarations and HCD data structures |
|
* |
|
* Copyright (C) 2004 Psion Teklogix |
|
* Copyright (C) 2004 David Brownell |
|
* Copyright (C) 2001 Cypress Semiconductor Inc. |
|
*/ |
|
|
|
/* |
|
* SL811HS has transfer registers, and control registers. In host/master |
|
* mode one set of registers is used; in peripheral/slave mode, another. |
|
* - SL11H only has some "A" transfer registers from 0x00-0x04 |
|
* - SL811HS also has "B" registers from 0x08-0x0c |
|
* - SL811S (or HS in slave mode) has four A+B sets, at 00, 10, 20, 30 |
|
*/ |
|
|
|
#define SL811_EP_A(base) ((base) + 0) |
|
#define SL811_EP_B(base) ((base) + 8) |
|
|
|
#define SL811_HOST_BUF 0x00 |
|
#define SL811_PERIPH_EP0 0x00 |
|
#define SL811_PERIPH_EP1 0x10 |
|
#define SL811_PERIPH_EP2 0x20 |
|
#define SL811_PERIPH_EP3 0x30 |
|
|
|
|
|
/* TRANSFER REGISTERS: host and peripheral sides are similar |
|
* except for the control models (master vs slave). |
|
*/ |
|
#define SL11H_HOSTCTLREG 0 |
|
# define SL11H_HCTLMASK_ARM 0x01 |
|
# define SL11H_HCTLMASK_ENABLE 0x02 |
|
# define SL11H_HCTLMASK_IN 0x00 |
|
# define SL11H_HCTLMASK_OUT 0x04 |
|
# define SL11H_HCTLMASK_ISOCH 0x10 |
|
# define SL11H_HCTLMASK_AFTERSOF 0x20 |
|
# define SL11H_HCTLMASK_TOGGLE 0x40 |
|
# define SL11H_HCTLMASK_PREAMBLE 0x80 |
|
#define SL11H_BUFADDRREG 1 |
|
#define SL11H_BUFLNTHREG 2 |
|
#define SL11H_PKTSTATREG 3 /* read */ |
|
# define SL11H_STATMASK_ACK 0x01 |
|
# define SL11H_STATMASK_ERROR 0x02 |
|
# define SL11H_STATMASK_TMOUT 0x04 |
|
# define SL11H_STATMASK_SEQ 0x08 |
|
# define SL11H_STATMASK_SETUP 0x10 |
|
# define SL11H_STATMASK_OVF 0x20 |
|
# define SL11H_STATMASK_NAK 0x40 |
|
# define SL11H_STATMASK_STALL 0x80 |
|
#define SL11H_PIDEPREG 3 /* write */ |
|
# define SL_SETUP 0xd0 |
|
# define SL_IN 0x90 |
|
# define SL_OUT 0x10 |
|
# define SL_SOF 0x50 |
|
# define SL_PREAMBLE 0xc0 |
|
# define SL_NAK 0xa0 |
|
# define SL_STALL 0xe0 |
|
# define SL_DATA0 0x30 |
|
# define SL_DATA1 0xb0 |
|
#define SL11H_XFERCNTREG 4 /* read */ |
|
#define SL11H_DEVADDRREG 4 /* write */ |
|
|
|
|
|
/* CONTROL REGISTERS: host and peripheral are very different. |
|
*/ |
|
#define SL11H_CTLREG1 5 |
|
# define SL11H_CTL1MASK_SOF_ENA 0x01 |
|
# define SL11H_CTL1MASK_FORCE 0x18 |
|
# define SL11H_CTL1MASK_NORMAL 0x00 |
|
# define SL11H_CTL1MASK_SE0 0x08 /* reset */ |
|
# define SL11H_CTL1MASK_J 0x10 |
|
# define SL11H_CTL1MASK_K 0x18 /* resume */ |
|
# define SL11H_CTL1MASK_LSPD 0x20 |
|
# define SL11H_CTL1MASK_SUSPEND 0x40 |
|
#define SL11H_IRQ_ENABLE 6 |
|
# define SL11H_INTMASK_DONE_A 0x01 |
|
# define SL11H_INTMASK_DONE_B 0x02 |
|
# define SL11H_INTMASK_SOFINTR 0x10 |
|
# define SL11H_INTMASK_INSRMV 0x20 /* to/from SE0 */ |
|
# define SL11H_INTMASK_RD 0x40 |
|
# define SL11H_INTMASK_DP 0x80 /* only in INTSTATREG */ |
|
#define SL11S_ADDRESS 7 |
|
|
|
/* 0x08-0x0c are for the B buffer (not in SL11) */ |
|
|
|
#define SL11H_IRQ_STATUS 0x0D /* write to ack */ |
|
#define SL11H_HWREVREG 0x0E /* read */ |
|
# define SL11H_HWRMASK_HWREV 0xF0 |
|
#define SL11H_SOFLOWREG 0x0E /* write */ |
|
#define SL11H_SOFTMRREG 0x0F /* read */ |
|
|
|
/* a write to this register enables SL811HS features. |
|
* HOST flag presumably overrides the chip input signal? |
|
*/ |
|
#define SL811HS_CTLREG2 0x0F |
|
# define SL811HS_CTL2MASK_SOF_MASK 0x3F |
|
# define SL811HS_CTL2MASK_DSWAP 0x40 |
|
# define SL811HS_CTL2MASK_HOST 0x80 |
|
|
|
#define SL811HS_CTL2_INIT (SL811HS_CTL2MASK_HOST | 0x2e) |
|
|
|
|
|
/* DATA BUFFERS: registers from 0x10..0xff are for data buffers; |
|
* that's 240 bytes, which we'll split evenly between A and B sides. |
|
* Only ISO can use more than 64 bytes per packet. |
|
* (The SL11S has 0x40..0xff for buffers.) |
|
*/ |
|
#define H_MAXPACKET 120 /* bytes in A or B fifos */ |
|
|
|
#define SL11H_DATA_START 0x10 |
|
#define SL811HS_PACKET_BUF(is_a) ((is_a) \ |
|
? SL11H_DATA_START \ |
|
: (SL11H_DATA_START + H_MAXPACKET)) |
|
|
|
/*-------------------------------------------------------------------------*/ |
|
|
|
#define LOG2_PERIODIC_SIZE 5 /* arbitrary; this matches OHCI */ |
|
#define PERIODIC_SIZE (1 << LOG2_PERIODIC_SIZE) |
|
|
|
struct sl811 { |
|
spinlock_t lock; |
|
void __iomem *addr_reg; |
|
void __iomem *data_reg; |
|
struct sl811_platform_data *board; |
|
struct dentry *debug_file; |
|
|
|
unsigned long stat_insrmv; |
|
unsigned long stat_wake; |
|
unsigned long stat_sof; |
|
unsigned long stat_a; |
|
unsigned long stat_b; |
|
unsigned long stat_lost; |
|
unsigned long stat_overrun; |
|
|
|
/* sw model */ |
|
struct timer_list timer; |
|
struct sl811h_ep *next_periodic; |
|
struct sl811h_ep *next_async; |
|
|
|
struct sl811h_ep *active_a; |
|
unsigned long jiffies_a; |
|
struct sl811h_ep *active_b; |
|
unsigned long jiffies_b; |
|
|
|
u32 port1; |
|
u8 ctrl1, ctrl2, irq_enable; |
|
u16 frame; |
|
|
|
/* async schedule: control, bulk */ |
|
struct list_head async; |
|
|
|
/* periodic schedule: interrupt, iso */ |
|
u16 load[PERIODIC_SIZE]; |
|
struct sl811h_ep *periodic[PERIODIC_SIZE]; |
|
unsigned periodic_count; |
|
}; |
|
|
|
static inline struct sl811 *hcd_to_sl811(struct usb_hcd *hcd) |
|
{ |
|
return (struct sl811 *) (hcd->hcd_priv); |
|
} |
|
|
|
static inline struct usb_hcd *sl811_to_hcd(struct sl811 *sl811) |
|
{ |
|
return container_of((void *) sl811, struct usb_hcd, hcd_priv); |
|
} |
|
|
|
struct sl811h_ep { |
|
struct usb_host_endpoint *hep; |
|
struct usb_device *udev; |
|
|
|
u8 defctrl; |
|
u8 maxpacket; |
|
u8 epnum; |
|
u8 nextpid; |
|
|
|
u16 error_count; |
|
u16 nak_count; |
|
u16 length; /* of current packet */ |
|
|
|
/* periodic schedule */ |
|
u16 period; |
|
u16 branch; |
|
u16 load; |
|
struct sl811h_ep *next; |
|
|
|
/* async schedule */ |
|
struct list_head schedule; |
|
}; |
|
|
|
/*-------------------------------------------------------------------------*/ |
|
|
|
/* These register utilities should work for the SL811S register API too |
|
* NOTE: caller must hold sl811->lock. |
|
*/ |
|
|
|
static inline u8 sl811_read(struct sl811 *sl811, int reg) |
|
{ |
|
writeb(reg, sl811->addr_reg); |
|
return readb(sl811->data_reg); |
|
} |
|
|
|
static inline void sl811_write(struct sl811 *sl811, int reg, u8 val) |
|
{ |
|
writeb(reg, sl811->addr_reg); |
|
writeb(val, sl811->data_reg); |
|
} |
|
|
|
static inline void |
|
sl811_write_buf(struct sl811 *sl811, int addr, const void *buf, size_t count) |
|
{ |
|
const u8 *data; |
|
void __iomem *data_reg; |
|
|
|
if (!count) |
|
return; |
|
writeb(addr, sl811->addr_reg); |
|
|
|
data = buf; |
|
data_reg = sl811->data_reg; |
|
do { |
|
writeb(*data++, data_reg); |
|
} while (--count); |
|
} |
|
|
|
static inline void |
|
sl811_read_buf(struct sl811 *sl811, int addr, void *buf, size_t count) |
|
{ |
|
u8 *data; |
|
void __iomem *data_reg; |
|
|
|
if (!count) |
|
return; |
|
writeb(addr, sl811->addr_reg); |
|
|
|
data = buf; |
|
data_reg = sl811->data_reg; |
|
do { |
|
*data++ = readb(data_reg); |
|
} while (--count); |
|
} |
|
|
|
/*-------------------------------------------------------------------------*/ |
|
|
|
#ifdef PACKET_TRACE |
|
# define PACKET pr_debug("sl811: "stuff) |
|
#else |
|
# define PACKET(stuff...) do{}while(0) |
|
#endif
|
|
|