forked from Qortal/Brooklyn
You can not select more than 25 topics
Topics must start with a letter or number, can include dashes ('-') and can be up to 35 characters long.
1156 lines
26 KiB
1156 lines
26 KiB
/* SPDX-License-Identifier: GPL-2.0-only */ |
|
/* |
|
* This file is part of wl1271 |
|
* |
|
* Copyright (C) 2009 Nokia Corporation |
|
* |
|
* Contact: Luciano Coelho <[email protected]> |
|
*/ |
|
|
|
#ifndef __CONF_H__ |
|
#define __CONF_H__ |
|
|
|
enum { |
|
CONF_HW_BIT_RATE_1MBPS = BIT(0), |
|
CONF_HW_BIT_RATE_2MBPS = BIT(1), |
|
CONF_HW_BIT_RATE_5_5MBPS = BIT(2), |
|
CONF_HW_BIT_RATE_6MBPS = BIT(3), |
|
CONF_HW_BIT_RATE_9MBPS = BIT(4), |
|
CONF_HW_BIT_RATE_11MBPS = BIT(5), |
|
CONF_HW_BIT_RATE_12MBPS = BIT(6), |
|
CONF_HW_BIT_RATE_18MBPS = BIT(7), |
|
CONF_HW_BIT_RATE_22MBPS = BIT(8), |
|
CONF_HW_BIT_RATE_24MBPS = BIT(9), |
|
CONF_HW_BIT_RATE_36MBPS = BIT(10), |
|
CONF_HW_BIT_RATE_48MBPS = BIT(11), |
|
CONF_HW_BIT_RATE_54MBPS = BIT(12), |
|
CONF_HW_BIT_RATE_MCS_0 = BIT(13), |
|
CONF_HW_BIT_RATE_MCS_1 = BIT(14), |
|
CONF_HW_BIT_RATE_MCS_2 = BIT(15), |
|
CONF_HW_BIT_RATE_MCS_3 = BIT(16), |
|
CONF_HW_BIT_RATE_MCS_4 = BIT(17), |
|
CONF_HW_BIT_RATE_MCS_5 = BIT(18), |
|
CONF_HW_BIT_RATE_MCS_6 = BIT(19), |
|
CONF_HW_BIT_RATE_MCS_7 = BIT(20), |
|
CONF_HW_BIT_RATE_MCS_8 = BIT(21), |
|
CONF_HW_BIT_RATE_MCS_9 = BIT(22), |
|
CONF_HW_BIT_RATE_MCS_10 = BIT(23), |
|
CONF_HW_BIT_RATE_MCS_11 = BIT(24), |
|
CONF_HW_BIT_RATE_MCS_12 = BIT(25), |
|
CONF_HW_BIT_RATE_MCS_13 = BIT(26), |
|
CONF_HW_BIT_RATE_MCS_14 = BIT(27), |
|
CONF_HW_BIT_RATE_MCS_15 = BIT(28), |
|
}; |
|
|
|
enum { |
|
CONF_HW_RATE_INDEX_1MBPS = 0, |
|
CONF_HW_RATE_INDEX_2MBPS = 1, |
|
CONF_HW_RATE_INDEX_5_5MBPS = 2, |
|
CONF_HW_RATE_INDEX_11MBPS = 3, |
|
CONF_HW_RATE_INDEX_6MBPS = 4, |
|
CONF_HW_RATE_INDEX_9MBPS = 5, |
|
CONF_HW_RATE_INDEX_12MBPS = 6, |
|
CONF_HW_RATE_INDEX_18MBPS = 7, |
|
CONF_HW_RATE_INDEX_24MBPS = 8, |
|
CONF_HW_RATE_INDEX_36MBPS = 9, |
|
CONF_HW_RATE_INDEX_48MBPS = 10, |
|
CONF_HW_RATE_INDEX_54MBPS = 11, |
|
CONF_HW_RATE_INDEX_MCS0 = 12, |
|
CONF_HW_RATE_INDEX_MCS1 = 13, |
|
CONF_HW_RATE_INDEX_MCS2 = 14, |
|
CONF_HW_RATE_INDEX_MCS3 = 15, |
|
CONF_HW_RATE_INDEX_MCS4 = 16, |
|
CONF_HW_RATE_INDEX_MCS5 = 17, |
|
CONF_HW_RATE_INDEX_MCS6 = 18, |
|
CONF_HW_RATE_INDEX_MCS7 = 19, |
|
CONF_HW_RATE_INDEX_MCS7_SGI = 20, |
|
CONF_HW_RATE_INDEX_MCS0_40MHZ = 21, |
|
CONF_HW_RATE_INDEX_MCS1_40MHZ = 22, |
|
CONF_HW_RATE_INDEX_MCS2_40MHZ = 23, |
|
CONF_HW_RATE_INDEX_MCS3_40MHZ = 24, |
|
CONF_HW_RATE_INDEX_MCS4_40MHZ = 25, |
|
CONF_HW_RATE_INDEX_MCS5_40MHZ = 26, |
|
CONF_HW_RATE_INDEX_MCS6_40MHZ = 27, |
|
CONF_HW_RATE_INDEX_MCS7_40MHZ = 28, |
|
CONF_HW_RATE_INDEX_MCS7_40MHZ_SGI = 29, |
|
|
|
/* MCS8+ rates overlap with 40Mhz rates */ |
|
CONF_HW_RATE_INDEX_MCS8 = 21, |
|
CONF_HW_RATE_INDEX_MCS9 = 22, |
|
CONF_HW_RATE_INDEX_MCS10 = 23, |
|
CONF_HW_RATE_INDEX_MCS11 = 24, |
|
CONF_HW_RATE_INDEX_MCS12 = 25, |
|
CONF_HW_RATE_INDEX_MCS13 = 26, |
|
CONF_HW_RATE_INDEX_MCS14 = 27, |
|
CONF_HW_RATE_INDEX_MCS15 = 28, |
|
CONF_HW_RATE_INDEX_MCS15_SGI = 29, |
|
|
|
CONF_HW_RATE_INDEX_MAX = CONF_HW_RATE_INDEX_MCS7_40MHZ_SGI, |
|
}; |
|
|
|
#define CONF_HW_RXTX_RATE_UNSUPPORTED 0xff |
|
|
|
enum { |
|
CONF_SG_DISABLE = 0, |
|
CONF_SG_PROTECTIVE, |
|
CONF_SG_OPPORTUNISTIC |
|
}; |
|
|
|
#define WLCORE_CONF_SG_PARAMS_MAX 67 |
|
#define WLCORE_CONF_SG_PARAMS_ALL 0xff |
|
|
|
struct conf_sg_settings { |
|
u32 params[WLCORE_CONF_SG_PARAMS_MAX]; |
|
u8 state; |
|
} __packed; |
|
|
|
enum conf_rx_queue_type { |
|
CONF_RX_QUEUE_TYPE_LOW_PRIORITY, /* All except the high priority */ |
|
CONF_RX_QUEUE_TYPE_HIGH_PRIORITY, /* Management and voice packets */ |
|
}; |
|
|
|
struct conf_rx_settings { |
|
/* |
|
* The maximum amount of time, in TU, before the |
|
* firmware discards the MSDU. |
|
* |
|
* Range: 0 - 0xFFFFFFFF |
|
*/ |
|
u32 rx_msdu_life_time; |
|
|
|
/* |
|
* Packet detection threshold in the PHY. |
|
* |
|
* FIXME: details unknown. |
|
*/ |
|
u32 packet_detection_threshold; |
|
|
|
/* |
|
* The longest time the STA will wait to receive traffic from the AP |
|
* after a PS-poll has been transmitted. |
|
* |
|
* Range: 0 - 200000 |
|
*/ |
|
u16 ps_poll_timeout; |
|
/* |
|
* The longest time the STA will wait to receive traffic from the AP |
|
* after a frame has been sent from an UPSD enabled queue. |
|
* |
|
* Range: 0 - 200000 |
|
*/ |
|
u16 upsd_timeout; |
|
|
|
/* |
|
* The number of octets in an MPDU, below which an RTS/CTS |
|
* handshake is not performed. |
|
* |
|
* Range: 0 - 4096 |
|
*/ |
|
u16 rts_threshold; |
|
|
|
/* |
|
* The RX Clear Channel Assessment threshold in the PHY |
|
* (the energy threshold). |
|
* |
|
* Range: ENABLE_ENERGY_D == 0x140A |
|
* DISABLE_ENERGY_D == 0xFFEF |
|
*/ |
|
u16 rx_cca_threshold; |
|
|
|
/* |
|
* Occupied Rx mem-blocks number which requires interrupting the host |
|
* (0 = no buffering, 0xffff = disabled). |
|
* |
|
* Range: u16 |
|
*/ |
|
u16 irq_blk_threshold; |
|
|
|
/* |
|
* Rx packets number which requires interrupting the host |
|
* (0 = no buffering). |
|
* |
|
* Range: u16 |
|
*/ |
|
u16 irq_pkt_threshold; |
|
|
|
/* |
|
* Max time in msec the FW may delay RX-Complete interrupt. |
|
* |
|
* Range: 1 - 100 |
|
*/ |
|
u16 irq_timeout; |
|
|
|
/* |
|
* The RX queue type. |
|
* |
|
* Range: RX_QUEUE_TYPE_RX_LOW_PRIORITY, RX_QUEUE_TYPE_RX_HIGH_PRIORITY, |
|
*/ |
|
u8 queue_type; |
|
} __packed; |
|
|
|
#define CONF_TX_MAX_RATE_CLASSES 10 |
|
|
|
#define CONF_TX_RATE_MASK_UNSPECIFIED 0 |
|
#define CONF_TX_RATE_MASK_BASIC (CONF_HW_BIT_RATE_1MBPS | \ |
|
CONF_HW_BIT_RATE_2MBPS) |
|
#define CONF_TX_RATE_RETRY_LIMIT 10 |
|
|
|
/* basic rates for p2p operations (probe req/resp, etc.) */ |
|
#define CONF_TX_RATE_MASK_BASIC_P2P CONF_HW_BIT_RATE_6MBPS |
|
|
|
/* |
|
* Rates supported for data packets when operating as STA/AP. Note the absence |
|
* of the 22Mbps rate. There is a FW limitation on 12 rates so we must drop |
|
* one. The rate dropped is not mandatory under any operating mode. |
|
*/ |
|
#define CONF_TX_ENABLED_RATES (CONF_HW_BIT_RATE_1MBPS | \ |
|
CONF_HW_BIT_RATE_2MBPS | CONF_HW_BIT_RATE_5_5MBPS | \ |
|
CONF_HW_BIT_RATE_6MBPS | CONF_HW_BIT_RATE_9MBPS | \ |
|
CONF_HW_BIT_RATE_11MBPS | CONF_HW_BIT_RATE_12MBPS | \ |
|
CONF_HW_BIT_RATE_18MBPS | CONF_HW_BIT_RATE_24MBPS | \ |
|
CONF_HW_BIT_RATE_36MBPS | CONF_HW_BIT_RATE_48MBPS | \ |
|
CONF_HW_BIT_RATE_54MBPS) |
|
|
|
#define CONF_TX_CCK_RATES (CONF_HW_BIT_RATE_1MBPS | \ |
|
CONF_HW_BIT_RATE_2MBPS | CONF_HW_BIT_RATE_5_5MBPS | \ |
|
CONF_HW_BIT_RATE_11MBPS) |
|
|
|
#define CONF_TX_OFDM_RATES (CONF_HW_BIT_RATE_6MBPS | \ |
|
CONF_HW_BIT_RATE_12MBPS | CONF_HW_BIT_RATE_24MBPS | \ |
|
CONF_HW_BIT_RATE_36MBPS | CONF_HW_BIT_RATE_48MBPS | \ |
|
CONF_HW_BIT_RATE_54MBPS) |
|
|
|
#define CONF_TX_MCS_RATES (CONF_HW_BIT_RATE_MCS_0 | \ |
|
CONF_HW_BIT_RATE_MCS_1 | CONF_HW_BIT_RATE_MCS_2 | \ |
|
CONF_HW_BIT_RATE_MCS_3 | CONF_HW_BIT_RATE_MCS_4 | \ |
|
CONF_HW_BIT_RATE_MCS_5 | CONF_HW_BIT_RATE_MCS_6 | \ |
|
CONF_HW_BIT_RATE_MCS_7) |
|
|
|
#define CONF_TX_MIMO_RATES (CONF_HW_BIT_RATE_MCS_8 | \ |
|
CONF_HW_BIT_RATE_MCS_9 | CONF_HW_BIT_RATE_MCS_10 | \ |
|
CONF_HW_BIT_RATE_MCS_11 | CONF_HW_BIT_RATE_MCS_12 | \ |
|
CONF_HW_BIT_RATE_MCS_13 | CONF_HW_BIT_RATE_MCS_14 | \ |
|
CONF_HW_BIT_RATE_MCS_15) |
|
|
|
/* |
|
* Default rates for management traffic when operating in AP mode. This |
|
* should be configured according to the basic rate set of the AP |
|
*/ |
|
#define CONF_TX_AP_DEFAULT_MGMT_RATES (CONF_HW_BIT_RATE_1MBPS | \ |
|
CONF_HW_BIT_RATE_2MBPS | CONF_HW_BIT_RATE_5_5MBPS) |
|
|
|
/* default rates for working as IBSS (11b and OFDM) */ |
|
#define CONF_TX_IBSS_DEFAULT_RATES (CONF_HW_BIT_RATE_1MBPS | \ |
|
CONF_HW_BIT_RATE_2MBPS | CONF_HW_BIT_RATE_5_5MBPS | \ |
|
CONF_HW_BIT_RATE_11MBPS | CONF_TX_OFDM_RATES); |
|
|
|
struct conf_tx_rate_class { |
|
|
|
/* |
|
* The rates enabled for this rate class. |
|
* |
|
* Range: CONF_HW_BIT_RATE_* bit mask |
|
*/ |
|
u32 enabled_rates; |
|
|
|
/* |
|
* The dot11 short retry limit used for TX retries. |
|
* |
|
* Range: u8 |
|
*/ |
|
u8 short_retry_limit; |
|
|
|
/* |
|
* The dot11 long retry limit used for TX retries. |
|
* |
|
* Range: u8 |
|
*/ |
|
u8 long_retry_limit; |
|
|
|
/* |
|
* Flags controlling the attributes of TX transmission. |
|
* |
|
* Range: bit 0: Truncate - when set, FW attempts to send a frame stop |
|
* when the total valid per-rate attempts have |
|
* been exhausted; otherwise transmissions |
|
* will continue at the lowest available rate |
|
* until the appropriate one of the |
|
* short_retry_limit, long_retry_limit, |
|
* dot11_max_transmit_msdu_life_time, or |
|
* max_tx_life_time, is exhausted. |
|
* 1: Preamble Override - indicates if the preamble type |
|
* should be used in TX. |
|
* 2: Preamble Type - the type of the preamble to be used by |
|
* the policy (0 - long preamble, 1 - short preamble. |
|
*/ |
|
u8 aflags; |
|
} __packed; |
|
|
|
#define CONF_TX_MAX_AC_COUNT 4 |
|
|
|
/* Slot number setting to start transmission at PIFS interval */ |
|
#define CONF_TX_AIFS_PIFS 1 |
|
/* Slot number setting to start transmission at DIFS interval normal |
|
* DCF access */ |
|
#define CONF_TX_AIFS_DIFS 2 |
|
|
|
|
|
enum conf_tx_ac { |
|
CONF_TX_AC_BE = 0, /* best effort / legacy */ |
|
CONF_TX_AC_BK = 1, /* background */ |
|
CONF_TX_AC_VI = 2, /* video */ |
|
CONF_TX_AC_VO = 3, /* voice */ |
|
CONF_TX_AC_CTS2SELF = 4, /* fictitious AC, follows AC_VO */ |
|
CONF_TX_AC_ANY_TID = 0xff |
|
}; |
|
|
|
struct conf_tx_ac_category { |
|
/* |
|
* The AC class identifier. |
|
* |
|
* Range: enum conf_tx_ac |
|
*/ |
|
u8 ac; |
|
|
|
/* |
|
* The contention window minimum size (in slots) for the access |
|
* class. |
|
* |
|
* Range: u8 |
|
*/ |
|
u8 cw_min; |
|
|
|
/* |
|
* The contention window maximum size (in slots) for the access |
|
* class. |
|
* |
|
* Range: u8 |
|
*/ |
|
u16 cw_max; |
|
|
|
/* |
|
* The AIF value (in slots) for the access class. |
|
* |
|
* Range: u8 |
|
*/ |
|
u8 aifsn; |
|
|
|
/* |
|
* The TX Op Limit (in microseconds) for the access class. |
|
* |
|
* Range: u16 |
|
*/ |
|
u16 tx_op_limit; |
|
} __packed; |
|
|
|
#define CONF_TX_MAX_TID_COUNT 8 |
|
|
|
/* Allow TX BA on all TIDs but 6,7. These are currently reserved in the FW */ |
|
#define CONF_TX_BA_ENABLED_TID_BITMAP 0x3F |
|
|
|
enum { |
|
CONF_CHANNEL_TYPE_DCF = 0, /* DC/LEGACY*/ |
|
CONF_CHANNEL_TYPE_EDCF = 1, /* EDCA*/ |
|
CONF_CHANNEL_TYPE_HCCA = 2, /* HCCA*/ |
|
}; |
|
|
|
enum { |
|
CONF_PS_SCHEME_LEGACY = 0, |
|
CONF_PS_SCHEME_UPSD_TRIGGER = 1, |
|
CONF_PS_SCHEME_LEGACY_PSPOLL = 2, |
|
CONF_PS_SCHEME_SAPSD = 3, |
|
}; |
|
|
|
enum { |
|
CONF_ACK_POLICY_LEGACY = 0, |
|
CONF_ACK_POLICY_NO_ACK = 1, |
|
CONF_ACK_POLICY_BLOCK = 2, |
|
}; |
|
|
|
|
|
struct conf_tx_tid { |
|
u8 queue_id; |
|
u8 channel_type; |
|
u8 tsid; |
|
u8 ps_scheme; |
|
u8 ack_policy; |
|
u32 apsd_conf[2]; |
|
} __packed; |
|
|
|
struct conf_tx_settings { |
|
/* |
|
* The TX ED value for TELEC Enable/Disable. |
|
* |
|
* Range: 0, 1 |
|
*/ |
|
u8 tx_energy_detection; |
|
|
|
/* |
|
* Configuration for rate classes for TX (currently only one |
|
* rate class supported). Used in non-AP mode. |
|
*/ |
|
struct conf_tx_rate_class sta_rc_conf; |
|
|
|
/* |
|
* Configuration for access categories for TX rate control. |
|
*/ |
|
u8 ac_conf_count; |
|
struct conf_tx_ac_category ac_conf[CONF_TX_MAX_AC_COUNT]; |
|
|
|
/* |
|
* AP-mode - allow this number of TX retries to a station before an |
|
* event is triggered from FW. |
|
* In AP-mode the hlids of unreachable stations are given in the |
|
* "sta_tx_retry_exceeded" member in the event mailbox. |
|
*/ |
|
u8 max_tx_retries; |
|
|
|
/* |
|
* AP-mode - after this number of seconds a connected station is |
|
* considered inactive. |
|
*/ |
|
u16 ap_aging_period; |
|
|
|
/* |
|
* Configuration for TID parameters. |
|
*/ |
|
u8 tid_conf_count; |
|
struct conf_tx_tid tid_conf[CONF_TX_MAX_TID_COUNT]; |
|
|
|
/* |
|
* The TX fragmentation threshold. |
|
* |
|
* Range: u16 |
|
*/ |
|
u16 frag_threshold; |
|
|
|
/* |
|
* Max time in msec the FW may delay frame TX-Complete interrupt. |
|
* |
|
* Range: u16 |
|
*/ |
|
u16 tx_compl_timeout; |
|
|
|
/* |
|
* Completed TX packet count which requires to issue the TX-Complete |
|
* interrupt. |
|
* |
|
* Range: u16 |
|
*/ |
|
u16 tx_compl_threshold; |
|
|
|
/* |
|
* The rate used for control messages and scanning on the 2.4GHz band |
|
* |
|
* Range: CONF_HW_BIT_RATE_* bit mask |
|
*/ |
|
u32 basic_rate; |
|
|
|
/* |
|
* The rate used for control messages and scanning on the 5GHz band |
|
* |
|
* Range: CONF_HW_BIT_RATE_* bit mask |
|
*/ |
|
u32 basic_rate_5; |
|
|
|
/* |
|
* TX retry limits for templates |
|
*/ |
|
u8 tmpl_short_retry_limit; |
|
u8 tmpl_long_retry_limit; |
|
|
|
/* Time in ms for Tx watchdog timer to expire */ |
|
u32 tx_watchdog_timeout; |
|
|
|
/* |
|
* when a slow link has this much packets pending, it becomes a low |
|
* priority link, scheduling-wise |
|
*/ |
|
u8 slow_link_thold; |
|
|
|
/* |
|
* when a fast link has this much packets pending, it becomes a low |
|
* priority link, scheduling-wise |
|
*/ |
|
u8 fast_link_thold; |
|
} __packed; |
|
|
|
enum { |
|
CONF_WAKE_UP_EVENT_BEACON = 0x01, /* Wake on every Beacon*/ |
|
CONF_WAKE_UP_EVENT_DTIM = 0x02, /* Wake on every DTIM*/ |
|
CONF_WAKE_UP_EVENT_N_DTIM = 0x04, /* Wake every Nth DTIM */ |
|
CONF_WAKE_UP_EVENT_N_BEACONS = 0x08, /* Wake every Nth beacon */ |
|
CONF_WAKE_UP_EVENT_BITS_MASK = 0x0F |
|
}; |
|
|
|
#define CONF_MAX_BCN_FILT_IE_COUNT 32 |
|
|
|
#define CONF_BCN_RULE_PASS_ON_CHANGE BIT(0) |
|
#define CONF_BCN_RULE_PASS_ON_APPEARANCE BIT(1) |
|
|
|
#define CONF_BCN_IE_OUI_LEN 3 |
|
#define CONF_BCN_IE_VER_LEN 2 |
|
|
|
struct conf_bcn_filt_rule { |
|
/* |
|
* IE number to which to associate a rule. |
|
* |
|
* Range: u8 |
|
*/ |
|
u8 ie; |
|
|
|
/* |
|
* Rule to associate with the specific ie. |
|
* |
|
* Range: CONF_BCN_RULE_PASS_ON_* |
|
*/ |
|
u8 rule; |
|
|
|
/* |
|
* OUI for the vendor specifie IE (221) |
|
*/ |
|
u8 oui[CONF_BCN_IE_OUI_LEN]; |
|
|
|
/* |
|
* Type for the vendor specifie IE (221) |
|
*/ |
|
u8 type; |
|
|
|
/* |
|
* Version for the vendor specifie IE (221) |
|
*/ |
|
u8 version[CONF_BCN_IE_VER_LEN]; |
|
} __packed; |
|
|
|
#define CONF_MAX_RSSI_SNR_TRIGGERS 8 |
|
|
|
enum { |
|
CONF_TRIG_METRIC_RSSI_BEACON = 0, |
|
CONF_TRIG_METRIC_RSSI_DATA, |
|
CONF_TRIG_METRIC_SNR_BEACON, |
|
CONF_TRIG_METRIC_SNR_DATA |
|
}; |
|
|
|
enum { |
|
CONF_TRIG_EVENT_TYPE_LEVEL = 0, |
|
CONF_TRIG_EVENT_TYPE_EDGE |
|
}; |
|
|
|
enum { |
|
CONF_TRIG_EVENT_DIR_LOW = 0, |
|
CONF_TRIG_EVENT_DIR_HIGH, |
|
CONF_TRIG_EVENT_DIR_BIDIR |
|
}; |
|
|
|
struct conf_sig_weights { |
|
|
|
/* |
|
* RSSI from beacons average weight. |
|
* |
|
* Range: u8 |
|
*/ |
|
u8 rssi_bcn_avg_weight; |
|
|
|
/* |
|
* RSSI from data average weight. |
|
* |
|
* Range: u8 |
|
*/ |
|
u8 rssi_pkt_avg_weight; |
|
|
|
/* |
|
* SNR from beacons average weight. |
|
* |
|
* Range: u8 |
|
*/ |
|
u8 snr_bcn_avg_weight; |
|
|
|
/* |
|
* SNR from data average weight. |
|
* |
|
* Range: u8 |
|
*/ |
|
u8 snr_pkt_avg_weight; |
|
} __packed; |
|
|
|
enum conf_bcn_filt_mode { |
|
CONF_BCN_FILT_MODE_DISABLED = 0, |
|
CONF_BCN_FILT_MODE_ENABLED = 1 |
|
}; |
|
|
|
enum conf_bet_mode { |
|
CONF_BET_MODE_DISABLE = 0, |
|
CONF_BET_MODE_ENABLE = 1, |
|
}; |
|
|
|
struct conf_conn_settings { |
|
/* |
|
* Firmware wakeup conditions configuration. The host may set only |
|
* one bit. |
|
* |
|
* Range: CONF_WAKE_UP_EVENT_* |
|
*/ |
|
u8 wake_up_event; |
|
|
|
/* |
|
* Listen interval for beacons or Dtims. |
|
* |
|
* Range: 0 for beacon and Dtim wakeup |
|
* 1-10 for x Dtims |
|
* 1-255 for x beacons |
|
*/ |
|
u8 listen_interval; |
|
|
|
/* |
|
* Firmware wakeup conditions during suspend |
|
* Range: CONF_WAKE_UP_EVENT_* |
|
*/ |
|
u8 suspend_wake_up_event; |
|
|
|
/* |
|
* Listen interval during suspend. |
|
* Currently will be in DTIMs (1-10) |
|
* |
|
*/ |
|
u8 suspend_listen_interval; |
|
|
|
/* |
|
* Enable or disable the beacon filtering. |
|
* |
|
* Range: CONF_BCN_FILT_MODE_* |
|
*/ |
|
u8 bcn_filt_mode; |
|
|
|
/* |
|
* Configure Beacon filter pass-thru rules. |
|
*/ |
|
u8 bcn_filt_ie_count; |
|
struct conf_bcn_filt_rule bcn_filt_ie[CONF_MAX_BCN_FILT_IE_COUNT]; |
|
|
|
/* |
|
* The number of consecutive beacons to lose, before the firmware |
|
* becomes out of synch. |
|
* |
|
* Range: u32 |
|
*/ |
|
u32 synch_fail_thold; |
|
|
|
/* |
|
* After out-of-synch, the number of TU's to wait without a further |
|
* received beacon (or probe response) before issuing the BSS_EVENT_LOSE |
|
* event. |
|
* |
|
* Range: u32 |
|
*/ |
|
u32 bss_lose_timeout; |
|
|
|
/* |
|
* Beacon receive timeout. |
|
* |
|
* Range: u32 |
|
*/ |
|
u32 beacon_rx_timeout; |
|
|
|
/* |
|
* Broadcast receive timeout. |
|
* |
|
* Range: u32 |
|
*/ |
|
u32 broadcast_timeout; |
|
|
|
/* |
|
* Enable/disable reception of broadcast packets in power save mode |
|
* |
|
* Range: 1 - enable, 0 - disable |
|
*/ |
|
u8 rx_broadcast_in_ps; |
|
|
|
/* |
|
* Consecutive PS Poll failures before sending event to driver |
|
* |
|
* Range: u8 |
|
*/ |
|
u8 ps_poll_threshold; |
|
|
|
/* |
|
* Configuration of signal average weights. |
|
*/ |
|
struct conf_sig_weights sig_weights; |
|
|
|
/* |
|
* Specifies if beacon early termination procedure is enabled or |
|
* disabled. |
|
* |
|
* Range: CONF_BET_MODE_* |
|
*/ |
|
u8 bet_enable; |
|
|
|
/* |
|
* Specifies the maximum number of consecutive beacons that may be |
|
* early terminated. After this number is reached at least one full |
|
* beacon must be correctly received in FW before beacon ET |
|
* resumes. |
|
* |
|
* Range 0 - 255 |
|
*/ |
|
u8 bet_max_consecutive; |
|
|
|
/* |
|
* Specifies the maximum number of times to try PSM entry if it fails |
|
* (if sending the appropriate null-func message fails.) |
|
* |
|
* Range 0 - 255 |
|
*/ |
|
u8 psm_entry_retries; |
|
|
|
/* |
|
* Specifies the maximum number of times to try PSM exit if it fails |
|
* (if sending the appropriate null-func message fails.) |
|
* |
|
* Range 0 - 255 |
|
*/ |
|
u8 psm_exit_retries; |
|
|
|
/* |
|
* Specifies the maximum number of times to try transmit the PSM entry |
|
* null-func frame for each PSM entry attempt |
|
* |
|
* Range 0 - 255 |
|
*/ |
|
u8 psm_entry_nullfunc_retries; |
|
|
|
/* |
|
* Specifies the dynamic PS timeout in ms that will be used |
|
* by the FW when in AUTO_PS mode |
|
*/ |
|
u16 dynamic_ps_timeout; |
|
|
|
/* |
|
* Specifies whether dynamic PS should be disabled and PSM forced. |
|
* This is required for certain WiFi certification tests. |
|
*/ |
|
u8 forced_ps; |
|
|
|
/* |
|
* |
|
* Specifies the interval of the connection keep-alive null-func |
|
* frame in ms. |
|
* |
|
* Range: 1000 - 3600000 |
|
*/ |
|
u32 keep_alive_interval; |
|
|
|
/* |
|
* Maximum listen interval supported by the driver in units of beacons. |
|
* |
|
* Range: u16 |
|
*/ |
|
u8 max_listen_interval; |
|
|
|
/* |
|
* Default sleep authorization for a new STA interface. This determines |
|
* whether we can go to ELP. |
|
*/ |
|
u8 sta_sleep_auth; |
|
|
|
/* |
|
* Default RX BA Activity filter configuration |
|
*/ |
|
u8 suspend_rx_ba_activity; |
|
} __packed; |
|
|
|
enum { |
|
CONF_REF_CLK_19_2_E, |
|
CONF_REF_CLK_26_E, |
|
CONF_REF_CLK_38_4_E, |
|
CONF_REF_CLK_52_E, |
|
CONF_REF_CLK_38_4_M_XTAL, |
|
CONF_REF_CLK_26_M_XTAL, |
|
}; |
|
|
|
enum single_dual_band_enum { |
|
CONF_SINGLE_BAND, |
|
CONF_DUAL_BAND |
|
}; |
|
|
|
#define CONF_RSSI_AND_PROCESS_COMPENSATION_SIZE 15 |
|
#define CONF_NUMBER_OF_SUB_BANDS_5 7 |
|
#define CONF_NUMBER_OF_RATE_GROUPS 6 |
|
#define CONF_NUMBER_OF_CHANNELS_2_4 14 |
|
#define CONF_NUMBER_OF_CHANNELS_5 35 |
|
|
|
struct conf_itrim_settings { |
|
/* enable dco itrim */ |
|
u8 enable; |
|
|
|
/* moderation timeout in microsecs from the last TX */ |
|
u32 timeout; |
|
} __packed; |
|
|
|
enum conf_fast_wakeup { |
|
CONF_FAST_WAKEUP_ENABLE, |
|
CONF_FAST_WAKEUP_DISABLE, |
|
}; |
|
|
|
struct conf_pm_config_settings { |
|
/* |
|
* Host clock settling time |
|
* |
|
* Range: 0 - 30000 us |
|
*/ |
|
u32 host_clk_settling_time; |
|
|
|
/* |
|
* Host fast wakeup support |
|
* |
|
* Range: enum conf_fast_wakeup |
|
*/ |
|
u8 host_fast_wakeup_support; |
|
} __packed; |
|
|
|
struct conf_roam_trigger_settings { |
|
/* |
|
* The minimum interval between two trigger events. |
|
* |
|
* Range: 0 - 60000 ms |
|
*/ |
|
u16 trigger_pacing; |
|
|
|
/* |
|
* The weight for rssi/beacon average calculation |
|
* |
|
* Range: 0 - 255 |
|
*/ |
|
u8 avg_weight_rssi_beacon; |
|
|
|
/* |
|
* The weight for rssi/data frame average calculation |
|
* |
|
* Range: 0 - 255 |
|
*/ |
|
u8 avg_weight_rssi_data; |
|
|
|
/* |
|
* The weight for snr/beacon average calculation |
|
* |
|
* Range: 0 - 255 |
|
*/ |
|
u8 avg_weight_snr_beacon; |
|
|
|
/* |
|
* The weight for snr/data frame average calculation |
|
* |
|
* Range: 0 - 255 |
|
*/ |
|
u8 avg_weight_snr_data; |
|
} __packed; |
|
|
|
struct conf_scan_settings { |
|
/* |
|
* The minimum time to wait on each channel for active scans |
|
* This value will be used whenever there's a connected interface. |
|
* |
|
* Range: u32 tu/1000 |
|
*/ |
|
u32 min_dwell_time_active; |
|
|
|
/* |
|
* The maximum time to wait on each channel for active scans |
|
* This value will be currently used whenever there's a |
|
* connected interface. It shouldn't exceed 30000 (~30ms) to avoid |
|
* possible interference of voip traffic going on while scanning. |
|
* |
|
* Range: u32 tu/1000 |
|
*/ |
|
u32 max_dwell_time_active; |
|
|
|
/* The minimum time to wait on each channel for active scans |
|
* when it's possible to have longer scan dwell times. |
|
* Currently this is used whenever we're idle on all interfaces. |
|
* Longer dwell times improve detection of networks within a |
|
* single scan. |
|
* |
|
* Range: u32 tu/1000 |
|
*/ |
|
u32 min_dwell_time_active_long; |
|
|
|
/* The maximum time to wait on each channel for active scans |
|
* when it's possible to have longer scan dwell times. |
|
* See min_dwell_time_active_long |
|
* |
|
* Range: u32 tu/1000 |
|
*/ |
|
u32 max_dwell_time_active_long; |
|
|
|
/* time to wait on the channel for passive scans (in TU/1000) */ |
|
u32 dwell_time_passive; |
|
|
|
/* time to wait on the channel for DFS scans (in TU/1000) */ |
|
u32 dwell_time_dfs; |
|
|
|
/* |
|
* Number of probe requests to transmit on each active scan channel |
|
* |
|
* Range: u8 |
|
*/ |
|
u16 num_probe_reqs; |
|
|
|
/* |
|
* Scan trigger (split scan) timeout. The FW will split the scan |
|
* operation into slices of the given time and allow the FW to schedule |
|
* other tasks in between. |
|
* |
|
* Range: u32 Microsecs |
|
*/ |
|
u32 split_scan_timeout; |
|
} __packed; |
|
|
|
struct conf_sched_scan_settings { |
|
/* |
|
* The base time to wait on the channel for active scans (in TU/1000). |
|
* The minimum dwell time is calculated according to this: |
|
* min_dwell_time = base + num_of_probes_to_be_sent * delta_per_probe |
|
* The maximum dwell time is calculated according to this: |
|
* max_dwell_time = min_dwell_time + max_dwell_time_delta |
|
*/ |
|
u32 base_dwell_time; |
|
|
|
/* The delta between the min dwell time and max dwell time for |
|
* active scans (in TU/1000s). The max dwell time is used by the FW once |
|
* traffic is detected on the channel. |
|
*/ |
|
u32 max_dwell_time_delta; |
|
|
|
/* Delta added to min dwell time per each probe in 2.4 GHz (TU/1000) */ |
|
u32 dwell_time_delta_per_probe; |
|
|
|
/* Delta added to min dwell time per each probe in 5 GHz (TU/1000) */ |
|
u32 dwell_time_delta_per_probe_5; |
|
|
|
/* time to wait on the channel for passive scans (in TU/1000) */ |
|
u32 dwell_time_passive; |
|
|
|
/* time to wait on the channel for DFS scans (in TU/1000) */ |
|
u32 dwell_time_dfs; |
|
|
|
/* number of probe requests to send on each channel in active scans */ |
|
u8 num_probe_reqs; |
|
|
|
/* RSSI threshold to be used for filtering */ |
|
s8 rssi_threshold; |
|
|
|
/* SNR threshold to be used for filtering */ |
|
s8 snr_threshold; |
|
|
|
/* |
|
* number of short intervals scheduled scan cycles before |
|
* switching to long intervals |
|
*/ |
|
u8 num_short_intervals; |
|
|
|
/* interval between each long scheduled scan cycle (in ms) */ |
|
u16 long_interval; |
|
} __packed; |
|
|
|
struct conf_ht_setting { |
|
u8 rx_ba_win_size; |
|
u8 tx_ba_win_size; |
|
u16 inactivity_timeout; |
|
|
|
/* bitmap of enabled TIDs for TX BA sessions */ |
|
u8 tx_ba_tid_bitmap; |
|
} __packed; |
|
|
|
struct conf_memory_settings { |
|
/* Number of stations supported in IBSS mode */ |
|
u8 num_stations; |
|
|
|
/* Number of ssid profiles used in IBSS mode */ |
|
u8 ssid_profiles; |
|
|
|
/* Number of memory buffers allocated to rx pool */ |
|
u8 rx_block_num; |
|
|
|
/* Minimum number of blocks allocated to tx pool */ |
|
u8 tx_min_block_num; |
|
|
|
/* Disable/Enable dynamic memory */ |
|
u8 dynamic_memory; |
|
|
|
/* |
|
* Minimum required free tx memory blocks in order to assure optimum |
|
* performance |
|
* |
|
* Range: 0-120 |
|
*/ |
|
u8 min_req_tx_blocks; |
|
|
|
/* |
|
* Minimum required free rx memory blocks in order to assure optimum |
|
* performance |
|
* |
|
* Range: 0-120 |
|
*/ |
|
u8 min_req_rx_blocks; |
|
|
|
/* |
|
* Minimum number of mem blocks (free+used) guaranteed for TX |
|
* |
|
* Range: 0-120 |
|
*/ |
|
u8 tx_min; |
|
} __packed; |
|
|
|
struct conf_fm_coex { |
|
u8 enable; |
|
u8 swallow_period; |
|
u8 n_divider_fref_set_1; |
|
u8 n_divider_fref_set_2; |
|
u16 m_divider_fref_set_1; |
|
u16 m_divider_fref_set_2; |
|
u32 coex_pll_stabilization_time; |
|
u16 ldo_stabilization_time; |
|
u8 fm_disturbed_band_margin; |
|
u8 swallow_clk_diff; |
|
} __packed; |
|
|
|
struct conf_rx_streaming_settings { |
|
/* |
|
* RX Streaming duration (in msec) from last tx/rx |
|
* |
|
* Range: u32 |
|
*/ |
|
u32 duration; |
|
|
|
/* |
|
* Bitmap of tids to be polled during RX streaming. |
|
* (Note: it doesn't look like it really matters) |
|
* |
|
* Range: 0x1-0xff |
|
*/ |
|
u8 queues; |
|
|
|
/* |
|
* RX Streaming interval. |
|
* (Note:this value is also used as the rx streaming timeout) |
|
* Range: 0 (disabled), 10 - 100 |
|
*/ |
|
u8 interval; |
|
|
|
/* |
|
* enable rx streaming also when there is no coex activity |
|
*/ |
|
u8 always; |
|
} __packed; |
|
|
|
#define CONF_FWLOG_MIN_MEM_BLOCKS 2 |
|
#define CONF_FWLOG_MAX_MEM_BLOCKS 16 |
|
|
|
struct conf_fwlog { |
|
/* Continuous or on-demand */ |
|
u8 mode; |
|
|
|
/* |
|
* Number of memory blocks dedicated for the FW logger |
|
* |
|
* Range: 2-16, or 0 to disable the FW logger |
|
*/ |
|
u8 mem_blocks; |
|
|
|
/* Minimum log level threshold */ |
|
u8 severity; |
|
|
|
/* Include/exclude timestamps from the log messages */ |
|
u8 timestamp; |
|
|
|
/* See enum wl1271_fwlogger_output */ |
|
u8 output; |
|
|
|
/* Regulates the frequency of log messages */ |
|
u8 threshold; |
|
} __packed; |
|
|
|
#define ACX_RATE_MGMT_NUM_OF_RATES 13 |
|
struct conf_rate_policy_settings { |
|
u16 rate_retry_score; |
|
u16 per_add; |
|
u16 per_th1; |
|
u16 per_th2; |
|
u16 max_per; |
|
u8 inverse_curiosity_factor; |
|
u8 tx_fail_low_th; |
|
u8 tx_fail_high_th; |
|
u8 per_alpha_shift; |
|
u8 per_add_shift; |
|
u8 per_beta1_shift; |
|
u8 per_beta2_shift; |
|
u8 rate_check_up; |
|
u8 rate_check_down; |
|
u8 rate_retry_policy[ACX_RATE_MGMT_NUM_OF_RATES]; |
|
} __packed; |
|
|
|
struct conf_hangover_settings { |
|
u32 recover_time; |
|
u8 hangover_period; |
|
u8 dynamic_mode; |
|
u8 early_termination_mode; |
|
u8 max_period; |
|
u8 min_period; |
|
u8 increase_delta; |
|
u8 decrease_delta; |
|
u8 quiet_time; |
|
u8 increase_time; |
|
u8 window_size; |
|
} __packed; |
|
|
|
struct conf_recovery_settings { |
|
/* BUG() on fw recovery */ |
|
u8 bug_on_recovery; |
|
|
|
/* Prevent HW recovery. FW will remain stuck. */ |
|
u8 no_recovery; |
|
} __packed; |
|
|
|
/* |
|
* The conf version consists of 4 bytes. The two MSB are the wlcore |
|
* version, the two LSB are the lower driver's private conf |
|
* version. |
|
*/ |
|
#define WLCORE_CONF_VERSION (0x0007 << 16) |
|
#define WLCORE_CONF_MASK 0xffff0000 |
|
#define WLCORE_CONF_SIZE (sizeof(struct wlcore_conf_header) + \ |
|
sizeof(struct wlcore_conf)) |
|
|
|
struct wlcore_conf_header { |
|
__le32 magic; |
|
__le32 version; |
|
__le32 checksum; |
|
} __packed; |
|
|
|
struct wlcore_conf { |
|
struct conf_sg_settings sg; |
|
struct conf_rx_settings rx; |
|
struct conf_tx_settings tx; |
|
struct conf_conn_settings conn; |
|
struct conf_itrim_settings itrim; |
|
struct conf_pm_config_settings pm_config; |
|
struct conf_roam_trigger_settings roam_trigger; |
|
struct conf_scan_settings scan; |
|
struct conf_sched_scan_settings sched_scan; |
|
struct conf_ht_setting ht; |
|
struct conf_memory_settings mem; |
|
struct conf_fm_coex fm_coex; |
|
struct conf_rx_streaming_settings rx_streaming; |
|
struct conf_fwlog fwlog; |
|
struct conf_rate_policy_settings rate; |
|
struct conf_hangover_settings hangover; |
|
struct conf_recovery_settings recovery; |
|
} __packed; |
|
|
|
struct wlcore_conf_file { |
|
struct wlcore_conf_header header; |
|
struct wlcore_conf core; |
|
u8 priv[]; |
|
} __packed; |
|
|
|
#endif
|
|
|