forked from Qortal/Brooklyn
You can not select more than 25 topics
Topics must start with a letter or number, can include dashes ('-') and can be up to 35 characters long.
1004 lines
34 KiB
1004 lines
34 KiB
// SPDX-License-Identifier: GPL-2.0-only |
|
/* |
|
* MFD core driver for the X-Powers' Power Management ICs |
|
* |
|
* AXP20x typically comprises an adaptive USB-Compatible PWM charger, BUCK DC-DC |
|
* converters, LDOs, multiple 12-bit ADCs of voltage, current and temperature |
|
* as well as configurable GPIOs. |
|
* |
|
* This file contains the interface independent core functions. |
|
* |
|
* Copyright (C) 2014 Carlo Caione |
|
* |
|
* Author: Carlo Caione <[email protected]> |
|
*/ |
|
|
|
#include <linux/acpi.h> |
|
#include <linux/bitops.h> |
|
#include <linux/delay.h> |
|
#include <linux/err.h> |
|
#include <linux/interrupt.h> |
|
#include <linux/kernel.h> |
|
#include <linux/mfd/axp20x.h> |
|
#include <linux/mfd/core.h> |
|
#include <linux/module.h> |
|
#include <linux/of_device.h> |
|
#include <linux/pm_runtime.h> |
|
#include <linux/regmap.h> |
|
#include <linux/regulator/consumer.h> |
|
|
|
#define AXP20X_OFF BIT(7) |
|
|
|
#define AXP806_REG_ADDR_EXT_ADDR_MASTER_MODE 0 |
|
#define AXP806_REG_ADDR_EXT_ADDR_SLAVE_MODE BIT(4) |
|
|
|
static const char * const axp20x_model_names[] = { |
|
"AXP152", |
|
"AXP202", |
|
"AXP209", |
|
"AXP221", |
|
"AXP223", |
|
"AXP288", |
|
"AXP803", |
|
"AXP806", |
|
"AXP809", |
|
"AXP813", |
|
}; |
|
|
|
static const struct regmap_range axp152_writeable_ranges[] = { |
|
regmap_reg_range(AXP152_LDO3456_DC1234_CTRL, AXP152_IRQ3_STATE), |
|
regmap_reg_range(AXP152_DCDC_MODE, AXP152_PWM1_DUTY_CYCLE), |
|
}; |
|
|
|
static const struct regmap_range axp152_volatile_ranges[] = { |
|
regmap_reg_range(AXP152_PWR_OP_MODE, AXP152_PWR_OP_MODE), |
|
regmap_reg_range(AXP152_IRQ1_EN, AXP152_IRQ3_STATE), |
|
regmap_reg_range(AXP152_GPIO_INPUT, AXP152_GPIO_INPUT), |
|
}; |
|
|
|
static const struct regmap_access_table axp152_writeable_table = { |
|
.yes_ranges = axp152_writeable_ranges, |
|
.n_yes_ranges = ARRAY_SIZE(axp152_writeable_ranges), |
|
}; |
|
|
|
static const struct regmap_access_table axp152_volatile_table = { |
|
.yes_ranges = axp152_volatile_ranges, |
|
.n_yes_ranges = ARRAY_SIZE(axp152_volatile_ranges), |
|
}; |
|
|
|
static const struct regmap_range axp20x_writeable_ranges[] = { |
|
regmap_reg_range(AXP20X_DATACACHE(0), AXP20X_IRQ5_STATE), |
|
regmap_reg_range(AXP20X_CHRG_CTRL1, AXP20X_CHRG_CTRL2), |
|
regmap_reg_range(AXP20X_DCDC_MODE, AXP20X_FG_RES), |
|
regmap_reg_range(AXP20X_RDC_H, AXP20X_OCV(AXP20X_OCV_MAX)), |
|
}; |
|
|
|
static const struct regmap_range axp20x_volatile_ranges[] = { |
|
regmap_reg_range(AXP20X_PWR_INPUT_STATUS, AXP20X_USB_OTG_STATUS), |
|
regmap_reg_range(AXP20X_CHRG_CTRL1, AXP20X_CHRG_CTRL2), |
|
regmap_reg_range(AXP20X_IRQ1_EN, AXP20X_IRQ5_STATE), |
|
regmap_reg_range(AXP20X_ACIN_V_ADC_H, AXP20X_IPSOUT_V_HIGH_L), |
|
regmap_reg_range(AXP20X_GPIO20_SS, AXP20X_GPIO3_CTRL), |
|
regmap_reg_range(AXP20X_FG_RES, AXP20X_RDC_L), |
|
}; |
|
|
|
static const struct regmap_access_table axp20x_writeable_table = { |
|
.yes_ranges = axp20x_writeable_ranges, |
|
.n_yes_ranges = ARRAY_SIZE(axp20x_writeable_ranges), |
|
}; |
|
|
|
static const struct regmap_access_table axp20x_volatile_table = { |
|
.yes_ranges = axp20x_volatile_ranges, |
|
.n_yes_ranges = ARRAY_SIZE(axp20x_volatile_ranges), |
|
}; |
|
|
|
/* AXP22x ranges are shared with the AXP809, as they cover the same range */ |
|
static const struct regmap_range axp22x_writeable_ranges[] = { |
|
regmap_reg_range(AXP20X_DATACACHE(0), AXP20X_IRQ5_STATE), |
|
regmap_reg_range(AXP20X_CHRG_CTRL1, AXP22X_CHRG_CTRL3), |
|
regmap_reg_range(AXP20X_DCDC_MODE, AXP22X_BATLOW_THRES1), |
|
}; |
|
|
|
static const struct regmap_range axp22x_volatile_ranges[] = { |
|
regmap_reg_range(AXP20X_PWR_INPUT_STATUS, AXP20X_PWR_OP_MODE), |
|
regmap_reg_range(AXP20X_IRQ1_EN, AXP20X_IRQ5_STATE), |
|
regmap_reg_range(AXP22X_GPIO_STATE, AXP22X_GPIO_STATE), |
|
regmap_reg_range(AXP22X_PMIC_TEMP_H, AXP20X_IPSOUT_V_HIGH_L), |
|
regmap_reg_range(AXP20X_FG_RES, AXP20X_FG_RES), |
|
}; |
|
|
|
static const struct regmap_access_table axp22x_writeable_table = { |
|
.yes_ranges = axp22x_writeable_ranges, |
|
.n_yes_ranges = ARRAY_SIZE(axp22x_writeable_ranges), |
|
}; |
|
|
|
static const struct regmap_access_table axp22x_volatile_table = { |
|
.yes_ranges = axp22x_volatile_ranges, |
|
.n_yes_ranges = ARRAY_SIZE(axp22x_volatile_ranges), |
|
}; |
|
|
|
/* AXP288 ranges are shared with the AXP803, as they cover the same range */ |
|
static const struct regmap_range axp288_writeable_ranges[] = { |
|
regmap_reg_range(AXP20X_DATACACHE(0), AXP20X_IRQ6_STATE), |
|
regmap_reg_range(AXP20X_DCDC_MODE, AXP288_FG_TUNE5), |
|
}; |
|
|
|
static const struct regmap_range axp288_volatile_ranges[] = { |
|
regmap_reg_range(AXP20X_PWR_INPUT_STATUS, AXP288_POWER_REASON), |
|
regmap_reg_range(AXP288_BC_GLOBAL, AXP288_BC_GLOBAL), |
|
regmap_reg_range(AXP288_BC_DET_STAT, AXP20X_VBUS_IPSOUT_MGMT), |
|
regmap_reg_range(AXP20X_CHRG_BAK_CTRL, AXP20X_CHRG_BAK_CTRL), |
|
regmap_reg_range(AXP20X_IRQ1_EN, AXP20X_IPSOUT_V_HIGH_L), |
|
regmap_reg_range(AXP20X_TIMER_CTRL, AXP20X_TIMER_CTRL), |
|
regmap_reg_range(AXP22X_GPIO_STATE, AXP22X_GPIO_STATE), |
|
regmap_reg_range(AXP288_RT_BATT_V_H, AXP288_RT_BATT_V_L), |
|
regmap_reg_range(AXP20X_FG_RES, AXP288_FG_CC_CAP_REG), |
|
}; |
|
|
|
static const struct regmap_access_table axp288_writeable_table = { |
|
.yes_ranges = axp288_writeable_ranges, |
|
.n_yes_ranges = ARRAY_SIZE(axp288_writeable_ranges), |
|
}; |
|
|
|
static const struct regmap_access_table axp288_volatile_table = { |
|
.yes_ranges = axp288_volatile_ranges, |
|
.n_yes_ranges = ARRAY_SIZE(axp288_volatile_ranges), |
|
}; |
|
|
|
static const struct regmap_range axp806_writeable_ranges[] = { |
|
regmap_reg_range(AXP20X_DATACACHE(0), AXP20X_DATACACHE(3)), |
|
regmap_reg_range(AXP806_PWR_OUT_CTRL1, AXP806_CLDO3_V_CTRL), |
|
regmap_reg_range(AXP20X_IRQ1_EN, AXP20X_IRQ2_EN), |
|
regmap_reg_range(AXP20X_IRQ1_STATE, AXP20X_IRQ2_STATE), |
|
regmap_reg_range(AXP806_REG_ADDR_EXT, AXP806_REG_ADDR_EXT), |
|
}; |
|
|
|
static const struct regmap_range axp806_volatile_ranges[] = { |
|
regmap_reg_range(AXP20X_IRQ1_STATE, AXP20X_IRQ2_STATE), |
|
}; |
|
|
|
static const struct regmap_access_table axp806_writeable_table = { |
|
.yes_ranges = axp806_writeable_ranges, |
|
.n_yes_ranges = ARRAY_SIZE(axp806_writeable_ranges), |
|
}; |
|
|
|
static const struct regmap_access_table axp806_volatile_table = { |
|
.yes_ranges = axp806_volatile_ranges, |
|
.n_yes_ranges = ARRAY_SIZE(axp806_volatile_ranges), |
|
}; |
|
|
|
static const struct resource axp152_pek_resources[] = { |
|
DEFINE_RES_IRQ_NAMED(AXP152_IRQ_PEK_RIS_EDGE, "PEK_DBR"), |
|
DEFINE_RES_IRQ_NAMED(AXP152_IRQ_PEK_FAL_EDGE, "PEK_DBF"), |
|
}; |
|
|
|
static const struct resource axp20x_ac_power_supply_resources[] = { |
|
DEFINE_RES_IRQ_NAMED(AXP20X_IRQ_ACIN_PLUGIN, "ACIN_PLUGIN"), |
|
DEFINE_RES_IRQ_NAMED(AXP20X_IRQ_ACIN_REMOVAL, "ACIN_REMOVAL"), |
|
DEFINE_RES_IRQ_NAMED(AXP20X_IRQ_ACIN_OVER_V, "ACIN_OVER_V"), |
|
}; |
|
|
|
static const struct resource axp20x_pek_resources[] = { |
|
DEFINE_RES_IRQ_NAMED(AXP20X_IRQ_PEK_RIS_EDGE, "PEK_DBR"), |
|
DEFINE_RES_IRQ_NAMED(AXP20X_IRQ_PEK_FAL_EDGE, "PEK_DBF"), |
|
}; |
|
|
|
static const struct resource axp20x_usb_power_supply_resources[] = { |
|
DEFINE_RES_IRQ_NAMED(AXP20X_IRQ_VBUS_PLUGIN, "VBUS_PLUGIN"), |
|
DEFINE_RES_IRQ_NAMED(AXP20X_IRQ_VBUS_REMOVAL, "VBUS_REMOVAL"), |
|
DEFINE_RES_IRQ_NAMED(AXP20X_IRQ_VBUS_VALID, "VBUS_VALID"), |
|
DEFINE_RES_IRQ_NAMED(AXP20X_IRQ_VBUS_NOT_VALID, "VBUS_NOT_VALID"), |
|
}; |
|
|
|
static const struct resource axp22x_usb_power_supply_resources[] = { |
|
DEFINE_RES_IRQ_NAMED(AXP22X_IRQ_VBUS_PLUGIN, "VBUS_PLUGIN"), |
|
DEFINE_RES_IRQ_NAMED(AXP22X_IRQ_VBUS_REMOVAL, "VBUS_REMOVAL"), |
|
}; |
|
|
|
/* AXP803 and AXP813/AXP818 share the same interrupts */ |
|
static const struct resource axp803_usb_power_supply_resources[] = { |
|
DEFINE_RES_IRQ_NAMED(AXP803_IRQ_VBUS_PLUGIN, "VBUS_PLUGIN"), |
|
DEFINE_RES_IRQ_NAMED(AXP803_IRQ_VBUS_REMOVAL, "VBUS_REMOVAL"), |
|
}; |
|
|
|
static const struct resource axp22x_pek_resources[] = { |
|
DEFINE_RES_IRQ_NAMED(AXP22X_IRQ_PEK_RIS_EDGE, "PEK_DBR"), |
|
DEFINE_RES_IRQ_NAMED(AXP22X_IRQ_PEK_FAL_EDGE, "PEK_DBF"), |
|
}; |
|
|
|
static const struct resource axp288_power_button_resources[] = { |
|
DEFINE_RES_IRQ_NAMED(AXP288_IRQ_POKP, "PEK_DBR"), |
|
DEFINE_RES_IRQ_NAMED(AXP288_IRQ_POKN, "PEK_DBF"), |
|
}; |
|
|
|
static const struct resource axp288_fuel_gauge_resources[] = { |
|
DEFINE_RES_IRQ(AXP288_IRQ_QWBTU), |
|
DEFINE_RES_IRQ(AXP288_IRQ_WBTU), |
|
DEFINE_RES_IRQ(AXP288_IRQ_QWBTO), |
|
DEFINE_RES_IRQ(AXP288_IRQ_WBTO), |
|
DEFINE_RES_IRQ(AXP288_IRQ_WL2), |
|
DEFINE_RES_IRQ(AXP288_IRQ_WL1), |
|
}; |
|
|
|
static const struct resource axp803_pek_resources[] = { |
|
DEFINE_RES_IRQ_NAMED(AXP803_IRQ_PEK_RIS_EDGE, "PEK_DBR"), |
|
DEFINE_RES_IRQ_NAMED(AXP803_IRQ_PEK_FAL_EDGE, "PEK_DBF"), |
|
}; |
|
|
|
static const struct resource axp806_pek_resources[] = { |
|
DEFINE_RES_IRQ_NAMED(AXP806_IRQ_POK_RISE, "PEK_DBR"), |
|
DEFINE_RES_IRQ_NAMED(AXP806_IRQ_POK_FALL, "PEK_DBF"), |
|
}; |
|
|
|
static const struct resource axp809_pek_resources[] = { |
|
DEFINE_RES_IRQ_NAMED(AXP809_IRQ_PEK_RIS_EDGE, "PEK_DBR"), |
|
DEFINE_RES_IRQ_NAMED(AXP809_IRQ_PEK_FAL_EDGE, "PEK_DBF"), |
|
}; |
|
|
|
static const struct regmap_config axp152_regmap_config = { |
|
.reg_bits = 8, |
|
.val_bits = 8, |
|
.wr_table = &axp152_writeable_table, |
|
.volatile_table = &axp152_volatile_table, |
|
.max_register = AXP152_PWM1_DUTY_CYCLE, |
|
.cache_type = REGCACHE_RBTREE, |
|
}; |
|
|
|
static const struct regmap_config axp20x_regmap_config = { |
|
.reg_bits = 8, |
|
.val_bits = 8, |
|
.wr_table = &axp20x_writeable_table, |
|
.volatile_table = &axp20x_volatile_table, |
|
.max_register = AXP20X_OCV(AXP20X_OCV_MAX), |
|
.cache_type = REGCACHE_RBTREE, |
|
}; |
|
|
|
static const struct regmap_config axp22x_regmap_config = { |
|
.reg_bits = 8, |
|
.val_bits = 8, |
|
.wr_table = &axp22x_writeable_table, |
|
.volatile_table = &axp22x_volatile_table, |
|
.max_register = AXP22X_BATLOW_THRES1, |
|
.cache_type = REGCACHE_RBTREE, |
|
}; |
|
|
|
static const struct regmap_config axp288_regmap_config = { |
|
.reg_bits = 8, |
|
.val_bits = 8, |
|
.wr_table = &axp288_writeable_table, |
|
.volatile_table = &axp288_volatile_table, |
|
.max_register = AXP288_FG_TUNE5, |
|
.cache_type = REGCACHE_RBTREE, |
|
}; |
|
|
|
static const struct regmap_config axp806_regmap_config = { |
|
.reg_bits = 8, |
|
.val_bits = 8, |
|
.wr_table = &axp806_writeable_table, |
|
.volatile_table = &axp806_volatile_table, |
|
.max_register = AXP806_REG_ADDR_EXT, |
|
.cache_type = REGCACHE_RBTREE, |
|
}; |
|
|
|
#define INIT_REGMAP_IRQ(_variant, _irq, _off, _mask) \ |
|
[_variant##_IRQ_##_irq] = { .reg_offset = (_off), .mask = BIT(_mask) } |
|
|
|
static const struct regmap_irq axp152_regmap_irqs[] = { |
|
INIT_REGMAP_IRQ(AXP152, LDO0IN_CONNECT, 0, 6), |
|
INIT_REGMAP_IRQ(AXP152, LDO0IN_REMOVAL, 0, 5), |
|
INIT_REGMAP_IRQ(AXP152, ALDO0IN_CONNECT, 0, 3), |
|
INIT_REGMAP_IRQ(AXP152, ALDO0IN_REMOVAL, 0, 2), |
|
INIT_REGMAP_IRQ(AXP152, DCDC1_V_LOW, 1, 5), |
|
INIT_REGMAP_IRQ(AXP152, DCDC2_V_LOW, 1, 4), |
|
INIT_REGMAP_IRQ(AXP152, DCDC3_V_LOW, 1, 3), |
|
INIT_REGMAP_IRQ(AXP152, DCDC4_V_LOW, 1, 2), |
|
INIT_REGMAP_IRQ(AXP152, PEK_SHORT, 1, 1), |
|
INIT_REGMAP_IRQ(AXP152, PEK_LONG, 1, 0), |
|
INIT_REGMAP_IRQ(AXP152, TIMER, 2, 7), |
|
INIT_REGMAP_IRQ(AXP152, PEK_RIS_EDGE, 2, 6), |
|
INIT_REGMAP_IRQ(AXP152, PEK_FAL_EDGE, 2, 5), |
|
INIT_REGMAP_IRQ(AXP152, GPIO3_INPUT, 2, 3), |
|
INIT_REGMAP_IRQ(AXP152, GPIO2_INPUT, 2, 2), |
|
INIT_REGMAP_IRQ(AXP152, GPIO1_INPUT, 2, 1), |
|
INIT_REGMAP_IRQ(AXP152, GPIO0_INPUT, 2, 0), |
|
}; |
|
|
|
static const struct regmap_irq axp20x_regmap_irqs[] = { |
|
INIT_REGMAP_IRQ(AXP20X, ACIN_OVER_V, 0, 7), |
|
INIT_REGMAP_IRQ(AXP20X, ACIN_PLUGIN, 0, 6), |
|
INIT_REGMAP_IRQ(AXP20X, ACIN_REMOVAL, 0, 5), |
|
INIT_REGMAP_IRQ(AXP20X, VBUS_OVER_V, 0, 4), |
|
INIT_REGMAP_IRQ(AXP20X, VBUS_PLUGIN, 0, 3), |
|
INIT_REGMAP_IRQ(AXP20X, VBUS_REMOVAL, 0, 2), |
|
INIT_REGMAP_IRQ(AXP20X, VBUS_V_LOW, 0, 1), |
|
INIT_REGMAP_IRQ(AXP20X, BATT_PLUGIN, 1, 7), |
|
INIT_REGMAP_IRQ(AXP20X, BATT_REMOVAL, 1, 6), |
|
INIT_REGMAP_IRQ(AXP20X, BATT_ENT_ACT_MODE, 1, 5), |
|
INIT_REGMAP_IRQ(AXP20X, BATT_EXIT_ACT_MODE, 1, 4), |
|
INIT_REGMAP_IRQ(AXP20X, CHARG, 1, 3), |
|
INIT_REGMAP_IRQ(AXP20X, CHARG_DONE, 1, 2), |
|
INIT_REGMAP_IRQ(AXP20X, BATT_TEMP_HIGH, 1, 1), |
|
INIT_REGMAP_IRQ(AXP20X, BATT_TEMP_LOW, 1, 0), |
|
INIT_REGMAP_IRQ(AXP20X, DIE_TEMP_HIGH, 2, 7), |
|
INIT_REGMAP_IRQ(AXP20X, CHARG_I_LOW, 2, 6), |
|
INIT_REGMAP_IRQ(AXP20X, DCDC1_V_LONG, 2, 5), |
|
INIT_REGMAP_IRQ(AXP20X, DCDC2_V_LONG, 2, 4), |
|
INIT_REGMAP_IRQ(AXP20X, DCDC3_V_LONG, 2, 3), |
|
INIT_REGMAP_IRQ(AXP20X, PEK_SHORT, 2, 1), |
|
INIT_REGMAP_IRQ(AXP20X, PEK_LONG, 2, 0), |
|
INIT_REGMAP_IRQ(AXP20X, N_OE_PWR_ON, 3, 7), |
|
INIT_REGMAP_IRQ(AXP20X, N_OE_PWR_OFF, 3, 6), |
|
INIT_REGMAP_IRQ(AXP20X, VBUS_VALID, 3, 5), |
|
INIT_REGMAP_IRQ(AXP20X, VBUS_NOT_VALID, 3, 4), |
|
INIT_REGMAP_IRQ(AXP20X, VBUS_SESS_VALID, 3, 3), |
|
INIT_REGMAP_IRQ(AXP20X, VBUS_SESS_END, 3, 2), |
|
INIT_REGMAP_IRQ(AXP20X, LOW_PWR_LVL1, 3, 1), |
|
INIT_REGMAP_IRQ(AXP20X, LOW_PWR_LVL2, 3, 0), |
|
INIT_REGMAP_IRQ(AXP20X, TIMER, 4, 7), |
|
INIT_REGMAP_IRQ(AXP20X, PEK_RIS_EDGE, 4, 6), |
|
INIT_REGMAP_IRQ(AXP20X, PEK_FAL_EDGE, 4, 5), |
|
INIT_REGMAP_IRQ(AXP20X, GPIO3_INPUT, 4, 3), |
|
INIT_REGMAP_IRQ(AXP20X, GPIO2_INPUT, 4, 2), |
|
INIT_REGMAP_IRQ(AXP20X, GPIO1_INPUT, 4, 1), |
|
INIT_REGMAP_IRQ(AXP20X, GPIO0_INPUT, 4, 0), |
|
}; |
|
|
|
static const struct regmap_irq axp22x_regmap_irqs[] = { |
|
INIT_REGMAP_IRQ(AXP22X, ACIN_OVER_V, 0, 7), |
|
INIT_REGMAP_IRQ(AXP22X, ACIN_PLUGIN, 0, 6), |
|
INIT_REGMAP_IRQ(AXP22X, ACIN_REMOVAL, 0, 5), |
|
INIT_REGMAP_IRQ(AXP22X, VBUS_OVER_V, 0, 4), |
|
INIT_REGMAP_IRQ(AXP22X, VBUS_PLUGIN, 0, 3), |
|
INIT_REGMAP_IRQ(AXP22X, VBUS_REMOVAL, 0, 2), |
|
INIT_REGMAP_IRQ(AXP22X, VBUS_V_LOW, 0, 1), |
|
INIT_REGMAP_IRQ(AXP22X, BATT_PLUGIN, 1, 7), |
|
INIT_REGMAP_IRQ(AXP22X, BATT_REMOVAL, 1, 6), |
|
INIT_REGMAP_IRQ(AXP22X, BATT_ENT_ACT_MODE, 1, 5), |
|
INIT_REGMAP_IRQ(AXP22X, BATT_EXIT_ACT_MODE, 1, 4), |
|
INIT_REGMAP_IRQ(AXP22X, CHARG, 1, 3), |
|
INIT_REGMAP_IRQ(AXP22X, CHARG_DONE, 1, 2), |
|
INIT_REGMAP_IRQ(AXP22X, BATT_TEMP_HIGH, 1, 1), |
|
INIT_REGMAP_IRQ(AXP22X, BATT_TEMP_LOW, 1, 0), |
|
INIT_REGMAP_IRQ(AXP22X, DIE_TEMP_HIGH, 2, 7), |
|
INIT_REGMAP_IRQ(AXP22X, PEK_SHORT, 2, 1), |
|
INIT_REGMAP_IRQ(AXP22X, PEK_LONG, 2, 0), |
|
INIT_REGMAP_IRQ(AXP22X, LOW_PWR_LVL1, 3, 1), |
|
INIT_REGMAP_IRQ(AXP22X, LOW_PWR_LVL2, 3, 0), |
|
INIT_REGMAP_IRQ(AXP22X, TIMER, 4, 7), |
|
INIT_REGMAP_IRQ(AXP22X, PEK_RIS_EDGE, 4, 6), |
|
INIT_REGMAP_IRQ(AXP22X, PEK_FAL_EDGE, 4, 5), |
|
INIT_REGMAP_IRQ(AXP22X, GPIO1_INPUT, 4, 1), |
|
INIT_REGMAP_IRQ(AXP22X, GPIO0_INPUT, 4, 0), |
|
}; |
|
|
|
/* some IRQs are compatible with axp20x models */ |
|
static const struct regmap_irq axp288_regmap_irqs[] = { |
|
INIT_REGMAP_IRQ(AXP288, VBUS_FALL, 0, 2), |
|
INIT_REGMAP_IRQ(AXP288, VBUS_RISE, 0, 3), |
|
INIT_REGMAP_IRQ(AXP288, OV, 0, 4), |
|
INIT_REGMAP_IRQ(AXP288, FALLING_ALT, 0, 5), |
|
INIT_REGMAP_IRQ(AXP288, RISING_ALT, 0, 6), |
|
INIT_REGMAP_IRQ(AXP288, OV_ALT, 0, 7), |
|
|
|
INIT_REGMAP_IRQ(AXP288, DONE, 1, 2), |
|
INIT_REGMAP_IRQ(AXP288, CHARGING, 1, 3), |
|
INIT_REGMAP_IRQ(AXP288, SAFE_QUIT, 1, 4), |
|
INIT_REGMAP_IRQ(AXP288, SAFE_ENTER, 1, 5), |
|
INIT_REGMAP_IRQ(AXP288, ABSENT, 1, 6), |
|
INIT_REGMAP_IRQ(AXP288, APPEND, 1, 7), |
|
|
|
INIT_REGMAP_IRQ(AXP288, QWBTU, 2, 0), |
|
INIT_REGMAP_IRQ(AXP288, WBTU, 2, 1), |
|
INIT_REGMAP_IRQ(AXP288, QWBTO, 2, 2), |
|
INIT_REGMAP_IRQ(AXP288, WBTO, 2, 3), |
|
INIT_REGMAP_IRQ(AXP288, QCBTU, 2, 4), |
|
INIT_REGMAP_IRQ(AXP288, CBTU, 2, 5), |
|
INIT_REGMAP_IRQ(AXP288, QCBTO, 2, 6), |
|
INIT_REGMAP_IRQ(AXP288, CBTO, 2, 7), |
|
|
|
INIT_REGMAP_IRQ(AXP288, WL2, 3, 0), |
|
INIT_REGMAP_IRQ(AXP288, WL1, 3, 1), |
|
INIT_REGMAP_IRQ(AXP288, GPADC, 3, 2), |
|
INIT_REGMAP_IRQ(AXP288, OT, 3, 7), |
|
|
|
INIT_REGMAP_IRQ(AXP288, GPIO0, 4, 0), |
|
INIT_REGMAP_IRQ(AXP288, GPIO1, 4, 1), |
|
INIT_REGMAP_IRQ(AXP288, POKO, 4, 2), |
|
INIT_REGMAP_IRQ(AXP288, POKL, 4, 3), |
|
INIT_REGMAP_IRQ(AXP288, POKS, 4, 4), |
|
INIT_REGMAP_IRQ(AXP288, POKN, 4, 5), |
|
INIT_REGMAP_IRQ(AXP288, POKP, 4, 6), |
|
INIT_REGMAP_IRQ(AXP288, TIMER, 4, 7), |
|
|
|
INIT_REGMAP_IRQ(AXP288, MV_CHNG, 5, 0), |
|
INIT_REGMAP_IRQ(AXP288, BC_USB_CHNG, 5, 1), |
|
}; |
|
|
|
static const struct regmap_irq axp803_regmap_irqs[] = { |
|
INIT_REGMAP_IRQ(AXP803, ACIN_OVER_V, 0, 7), |
|
INIT_REGMAP_IRQ(AXP803, ACIN_PLUGIN, 0, 6), |
|
INIT_REGMAP_IRQ(AXP803, ACIN_REMOVAL, 0, 5), |
|
INIT_REGMAP_IRQ(AXP803, VBUS_OVER_V, 0, 4), |
|
INIT_REGMAP_IRQ(AXP803, VBUS_PLUGIN, 0, 3), |
|
INIT_REGMAP_IRQ(AXP803, VBUS_REMOVAL, 0, 2), |
|
INIT_REGMAP_IRQ(AXP803, BATT_PLUGIN, 1, 7), |
|
INIT_REGMAP_IRQ(AXP803, BATT_REMOVAL, 1, 6), |
|
INIT_REGMAP_IRQ(AXP803, BATT_ENT_ACT_MODE, 1, 5), |
|
INIT_REGMAP_IRQ(AXP803, BATT_EXIT_ACT_MODE, 1, 4), |
|
INIT_REGMAP_IRQ(AXP803, CHARG, 1, 3), |
|
INIT_REGMAP_IRQ(AXP803, CHARG_DONE, 1, 2), |
|
INIT_REGMAP_IRQ(AXP803, BATT_CHG_TEMP_HIGH, 2, 7), |
|
INIT_REGMAP_IRQ(AXP803, BATT_CHG_TEMP_HIGH_END, 2, 6), |
|
INIT_REGMAP_IRQ(AXP803, BATT_CHG_TEMP_LOW, 2, 5), |
|
INIT_REGMAP_IRQ(AXP803, BATT_CHG_TEMP_LOW_END, 2, 4), |
|
INIT_REGMAP_IRQ(AXP803, BATT_ACT_TEMP_HIGH, 2, 3), |
|
INIT_REGMAP_IRQ(AXP803, BATT_ACT_TEMP_HIGH_END, 2, 2), |
|
INIT_REGMAP_IRQ(AXP803, BATT_ACT_TEMP_LOW, 2, 1), |
|
INIT_REGMAP_IRQ(AXP803, BATT_ACT_TEMP_LOW_END, 2, 0), |
|
INIT_REGMAP_IRQ(AXP803, DIE_TEMP_HIGH, 3, 7), |
|
INIT_REGMAP_IRQ(AXP803, GPADC, 3, 2), |
|
INIT_REGMAP_IRQ(AXP803, LOW_PWR_LVL1, 3, 1), |
|
INIT_REGMAP_IRQ(AXP803, LOW_PWR_LVL2, 3, 0), |
|
INIT_REGMAP_IRQ(AXP803, TIMER, 4, 7), |
|
INIT_REGMAP_IRQ(AXP803, PEK_RIS_EDGE, 4, 6), |
|
INIT_REGMAP_IRQ(AXP803, PEK_FAL_EDGE, 4, 5), |
|
INIT_REGMAP_IRQ(AXP803, PEK_SHORT, 4, 4), |
|
INIT_REGMAP_IRQ(AXP803, PEK_LONG, 4, 3), |
|
INIT_REGMAP_IRQ(AXP803, PEK_OVER_OFF, 4, 2), |
|
INIT_REGMAP_IRQ(AXP803, GPIO1_INPUT, 4, 1), |
|
INIT_REGMAP_IRQ(AXP803, GPIO0_INPUT, 4, 0), |
|
INIT_REGMAP_IRQ(AXP803, BC_USB_CHNG, 5, 1), |
|
INIT_REGMAP_IRQ(AXP803, MV_CHNG, 5, 0), |
|
}; |
|
|
|
static const struct regmap_irq axp806_regmap_irqs[] = { |
|
INIT_REGMAP_IRQ(AXP806, DIE_TEMP_HIGH_LV1, 0, 0), |
|
INIT_REGMAP_IRQ(AXP806, DIE_TEMP_HIGH_LV2, 0, 1), |
|
INIT_REGMAP_IRQ(AXP806, DCDCA_V_LOW, 0, 3), |
|
INIT_REGMAP_IRQ(AXP806, DCDCB_V_LOW, 0, 4), |
|
INIT_REGMAP_IRQ(AXP806, DCDCC_V_LOW, 0, 5), |
|
INIT_REGMAP_IRQ(AXP806, DCDCD_V_LOW, 0, 6), |
|
INIT_REGMAP_IRQ(AXP806, DCDCE_V_LOW, 0, 7), |
|
INIT_REGMAP_IRQ(AXP806, POK_LONG, 1, 0), |
|
INIT_REGMAP_IRQ(AXP806, POK_SHORT, 1, 1), |
|
INIT_REGMAP_IRQ(AXP806, WAKEUP, 1, 4), |
|
INIT_REGMAP_IRQ(AXP806, POK_FALL, 1, 5), |
|
INIT_REGMAP_IRQ(AXP806, POK_RISE, 1, 6), |
|
}; |
|
|
|
static const struct regmap_irq axp809_regmap_irqs[] = { |
|
INIT_REGMAP_IRQ(AXP809, ACIN_OVER_V, 0, 7), |
|
INIT_REGMAP_IRQ(AXP809, ACIN_PLUGIN, 0, 6), |
|
INIT_REGMAP_IRQ(AXP809, ACIN_REMOVAL, 0, 5), |
|
INIT_REGMAP_IRQ(AXP809, VBUS_OVER_V, 0, 4), |
|
INIT_REGMAP_IRQ(AXP809, VBUS_PLUGIN, 0, 3), |
|
INIT_REGMAP_IRQ(AXP809, VBUS_REMOVAL, 0, 2), |
|
INIT_REGMAP_IRQ(AXP809, VBUS_V_LOW, 0, 1), |
|
INIT_REGMAP_IRQ(AXP809, BATT_PLUGIN, 1, 7), |
|
INIT_REGMAP_IRQ(AXP809, BATT_REMOVAL, 1, 6), |
|
INIT_REGMAP_IRQ(AXP809, BATT_ENT_ACT_MODE, 1, 5), |
|
INIT_REGMAP_IRQ(AXP809, BATT_EXIT_ACT_MODE, 1, 4), |
|
INIT_REGMAP_IRQ(AXP809, CHARG, 1, 3), |
|
INIT_REGMAP_IRQ(AXP809, CHARG_DONE, 1, 2), |
|
INIT_REGMAP_IRQ(AXP809, BATT_CHG_TEMP_HIGH, 2, 7), |
|
INIT_REGMAP_IRQ(AXP809, BATT_CHG_TEMP_HIGH_END, 2, 6), |
|
INIT_REGMAP_IRQ(AXP809, BATT_CHG_TEMP_LOW, 2, 5), |
|
INIT_REGMAP_IRQ(AXP809, BATT_CHG_TEMP_LOW_END, 2, 4), |
|
INIT_REGMAP_IRQ(AXP809, BATT_ACT_TEMP_HIGH, 2, 3), |
|
INIT_REGMAP_IRQ(AXP809, BATT_ACT_TEMP_HIGH_END, 2, 2), |
|
INIT_REGMAP_IRQ(AXP809, BATT_ACT_TEMP_LOW, 2, 1), |
|
INIT_REGMAP_IRQ(AXP809, BATT_ACT_TEMP_LOW_END, 2, 0), |
|
INIT_REGMAP_IRQ(AXP809, DIE_TEMP_HIGH, 3, 7), |
|
INIT_REGMAP_IRQ(AXP809, LOW_PWR_LVL1, 3, 1), |
|
INIT_REGMAP_IRQ(AXP809, LOW_PWR_LVL2, 3, 0), |
|
INIT_REGMAP_IRQ(AXP809, TIMER, 4, 7), |
|
INIT_REGMAP_IRQ(AXP809, PEK_RIS_EDGE, 4, 6), |
|
INIT_REGMAP_IRQ(AXP809, PEK_FAL_EDGE, 4, 5), |
|
INIT_REGMAP_IRQ(AXP809, PEK_SHORT, 4, 4), |
|
INIT_REGMAP_IRQ(AXP809, PEK_LONG, 4, 3), |
|
INIT_REGMAP_IRQ(AXP809, PEK_OVER_OFF, 4, 2), |
|
INIT_REGMAP_IRQ(AXP809, GPIO1_INPUT, 4, 1), |
|
INIT_REGMAP_IRQ(AXP809, GPIO0_INPUT, 4, 0), |
|
}; |
|
|
|
static const struct regmap_irq_chip axp152_regmap_irq_chip = { |
|
.name = "axp152_irq_chip", |
|
.status_base = AXP152_IRQ1_STATE, |
|
.ack_base = AXP152_IRQ1_STATE, |
|
.mask_base = AXP152_IRQ1_EN, |
|
.mask_invert = true, |
|
.init_ack_masked = true, |
|
.irqs = axp152_regmap_irqs, |
|
.num_irqs = ARRAY_SIZE(axp152_regmap_irqs), |
|
.num_regs = 3, |
|
}; |
|
|
|
static const struct regmap_irq_chip axp20x_regmap_irq_chip = { |
|
.name = "axp20x_irq_chip", |
|
.status_base = AXP20X_IRQ1_STATE, |
|
.ack_base = AXP20X_IRQ1_STATE, |
|
.mask_base = AXP20X_IRQ1_EN, |
|
.mask_invert = true, |
|
.init_ack_masked = true, |
|
.irqs = axp20x_regmap_irqs, |
|
.num_irqs = ARRAY_SIZE(axp20x_regmap_irqs), |
|
.num_regs = 5, |
|
|
|
}; |
|
|
|
static const struct regmap_irq_chip axp22x_regmap_irq_chip = { |
|
.name = "axp22x_irq_chip", |
|
.status_base = AXP20X_IRQ1_STATE, |
|
.ack_base = AXP20X_IRQ1_STATE, |
|
.mask_base = AXP20X_IRQ1_EN, |
|
.mask_invert = true, |
|
.init_ack_masked = true, |
|
.irqs = axp22x_regmap_irqs, |
|
.num_irqs = ARRAY_SIZE(axp22x_regmap_irqs), |
|
.num_regs = 5, |
|
}; |
|
|
|
static const struct regmap_irq_chip axp288_regmap_irq_chip = { |
|
.name = "axp288_irq_chip", |
|
.status_base = AXP20X_IRQ1_STATE, |
|
.ack_base = AXP20X_IRQ1_STATE, |
|
.mask_base = AXP20X_IRQ1_EN, |
|
.mask_invert = true, |
|
.init_ack_masked = true, |
|
.irqs = axp288_regmap_irqs, |
|
.num_irqs = ARRAY_SIZE(axp288_regmap_irqs), |
|
.num_regs = 6, |
|
|
|
}; |
|
|
|
static const struct regmap_irq_chip axp803_regmap_irq_chip = { |
|
.name = "axp803", |
|
.status_base = AXP20X_IRQ1_STATE, |
|
.ack_base = AXP20X_IRQ1_STATE, |
|
.mask_base = AXP20X_IRQ1_EN, |
|
.mask_invert = true, |
|
.init_ack_masked = true, |
|
.irqs = axp803_regmap_irqs, |
|
.num_irqs = ARRAY_SIZE(axp803_regmap_irqs), |
|
.num_regs = 6, |
|
}; |
|
|
|
static const struct regmap_irq_chip axp806_regmap_irq_chip = { |
|
.name = "axp806", |
|
.status_base = AXP20X_IRQ1_STATE, |
|
.ack_base = AXP20X_IRQ1_STATE, |
|
.mask_base = AXP20X_IRQ1_EN, |
|
.mask_invert = true, |
|
.init_ack_masked = true, |
|
.irqs = axp806_regmap_irqs, |
|
.num_irqs = ARRAY_SIZE(axp806_regmap_irqs), |
|
.num_regs = 2, |
|
}; |
|
|
|
static const struct regmap_irq_chip axp809_regmap_irq_chip = { |
|
.name = "axp809", |
|
.status_base = AXP20X_IRQ1_STATE, |
|
.ack_base = AXP20X_IRQ1_STATE, |
|
.mask_base = AXP20X_IRQ1_EN, |
|
.mask_invert = true, |
|
.init_ack_masked = true, |
|
.irqs = axp809_regmap_irqs, |
|
.num_irqs = ARRAY_SIZE(axp809_regmap_irqs), |
|
.num_regs = 5, |
|
}; |
|
|
|
static const struct mfd_cell axp20x_cells[] = { |
|
{ |
|
.name = "axp20x-gpio", |
|
.of_compatible = "x-powers,axp209-gpio", |
|
}, { |
|
.name = "axp20x-pek", |
|
.num_resources = ARRAY_SIZE(axp20x_pek_resources), |
|
.resources = axp20x_pek_resources, |
|
}, { |
|
.name = "axp20x-regulator", |
|
}, { |
|
.name = "axp20x-adc", |
|
.of_compatible = "x-powers,axp209-adc", |
|
}, { |
|
.name = "axp20x-battery-power-supply", |
|
.of_compatible = "x-powers,axp209-battery-power-supply", |
|
}, { |
|
.name = "axp20x-ac-power-supply", |
|
.of_compatible = "x-powers,axp202-ac-power-supply", |
|
.num_resources = ARRAY_SIZE(axp20x_ac_power_supply_resources), |
|
.resources = axp20x_ac_power_supply_resources, |
|
}, { |
|
.name = "axp20x-usb-power-supply", |
|
.of_compatible = "x-powers,axp202-usb-power-supply", |
|
.num_resources = ARRAY_SIZE(axp20x_usb_power_supply_resources), |
|
.resources = axp20x_usb_power_supply_resources, |
|
}, |
|
}; |
|
|
|
static const struct mfd_cell axp221_cells[] = { |
|
{ |
|
.name = "axp221-pek", |
|
.num_resources = ARRAY_SIZE(axp22x_pek_resources), |
|
.resources = axp22x_pek_resources, |
|
}, { |
|
.name = "axp20x-regulator", |
|
}, { |
|
.name = "axp22x-adc", |
|
.of_compatible = "x-powers,axp221-adc", |
|
}, { |
|
.name = "axp20x-ac-power-supply", |
|
.of_compatible = "x-powers,axp221-ac-power-supply", |
|
.num_resources = ARRAY_SIZE(axp20x_ac_power_supply_resources), |
|
.resources = axp20x_ac_power_supply_resources, |
|
}, { |
|
.name = "axp20x-battery-power-supply", |
|
.of_compatible = "x-powers,axp221-battery-power-supply", |
|
}, { |
|
.name = "axp20x-usb-power-supply", |
|
.of_compatible = "x-powers,axp221-usb-power-supply", |
|
.num_resources = ARRAY_SIZE(axp22x_usb_power_supply_resources), |
|
.resources = axp22x_usb_power_supply_resources, |
|
}, |
|
}; |
|
|
|
static const struct mfd_cell axp223_cells[] = { |
|
{ |
|
.name = "axp221-pek", |
|
.num_resources = ARRAY_SIZE(axp22x_pek_resources), |
|
.resources = axp22x_pek_resources, |
|
}, { |
|
.name = "axp22x-adc", |
|
.of_compatible = "x-powers,axp221-adc", |
|
}, { |
|
.name = "axp20x-battery-power-supply", |
|
.of_compatible = "x-powers,axp221-battery-power-supply", |
|
}, { |
|
.name = "axp20x-regulator", |
|
}, { |
|
.name = "axp20x-ac-power-supply", |
|
.of_compatible = "x-powers,axp221-ac-power-supply", |
|
.num_resources = ARRAY_SIZE(axp20x_ac_power_supply_resources), |
|
.resources = axp20x_ac_power_supply_resources, |
|
}, { |
|
.name = "axp20x-usb-power-supply", |
|
.of_compatible = "x-powers,axp223-usb-power-supply", |
|
.num_resources = ARRAY_SIZE(axp22x_usb_power_supply_resources), |
|
.resources = axp22x_usb_power_supply_resources, |
|
}, |
|
}; |
|
|
|
static const struct mfd_cell axp152_cells[] = { |
|
{ |
|
.name = "axp20x-pek", |
|
.num_resources = ARRAY_SIZE(axp152_pek_resources), |
|
.resources = axp152_pek_resources, |
|
}, |
|
}; |
|
|
|
static const struct resource axp288_adc_resources[] = { |
|
DEFINE_RES_IRQ_NAMED(AXP288_IRQ_GPADC, "GPADC"), |
|
}; |
|
|
|
static const struct resource axp288_extcon_resources[] = { |
|
DEFINE_RES_IRQ(AXP288_IRQ_VBUS_FALL), |
|
DEFINE_RES_IRQ(AXP288_IRQ_VBUS_RISE), |
|
DEFINE_RES_IRQ(AXP288_IRQ_MV_CHNG), |
|
DEFINE_RES_IRQ(AXP288_IRQ_BC_USB_CHNG), |
|
}; |
|
|
|
static const struct resource axp288_charger_resources[] = { |
|
DEFINE_RES_IRQ(AXP288_IRQ_OV), |
|
DEFINE_RES_IRQ(AXP288_IRQ_DONE), |
|
DEFINE_RES_IRQ(AXP288_IRQ_CHARGING), |
|
DEFINE_RES_IRQ(AXP288_IRQ_SAFE_QUIT), |
|
DEFINE_RES_IRQ(AXP288_IRQ_SAFE_ENTER), |
|
DEFINE_RES_IRQ(AXP288_IRQ_QCBTU), |
|
DEFINE_RES_IRQ(AXP288_IRQ_CBTU), |
|
DEFINE_RES_IRQ(AXP288_IRQ_QCBTO), |
|
DEFINE_RES_IRQ(AXP288_IRQ_CBTO), |
|
}; |
|
|
|
static const struct mfd_cell axp288_cells[] = { |
|
{ |
|
.name = "axp288_adc", |
|
.num_resources = ARRAY_SIZE(axp288_adc_resources), |
|
.resources = axp288_adc_resources, |
|
}, { |
|
.name = "axp288_extcon", |
|
.num_resources = ARRAY_SIZE(axp288_extcon_resources), |
|
.resources = axp288_extcon_resources, |
|
}, { |
|
.name = "axp288_charger", |
|
.num_resources = ARRAY_SIZE(axp288_charger_resources), |
|
.resources = axp288_charger_resources, |
|
}, { |
|
.name = "axp288_fuel_gauge", |
|
.num_resources = ARRAY_SIZE(axp288_fuel_gauge_resources), |
|
.resources = axp288_fuel_gauge_resources, |
|
}, { |
|
.name = "axp221-pek", |
|
.num_resources = ARRAY_SIZE(axp288_power_button_resources), |
|
.resources = axp288_power_button_resources, |
|
}, { |
|
.name = "axp288_pmic_acpi", |
|
}, |
|
}; |
|
|
|
static const struct mfd_cell axp803_cells[] = { |
|
{ |
|
.name = "axp221-pek", |
|
.num_resources = ARRAY_SIZE(axp803_pek_resources), |
|
.resources = axp803_pek_resources, |
|
}, { |
|
.name = "axp20x-gpio", |
|
.of_compatible = "x-powers,axp813-gpio", |
|
}, { |
|
.name = "axp813-adc", |
|
.of_compatible = "x-powers,axp813-adc", |
|
}, { |
|
.name = "axp20x-battery-power-supply", |
|
.of_compatible = "x-powers,axp813-battery-power-supply", |
|
}, { |
|
.name = "axp20x-ac-power-supply", |
|
.of_compatible = "x-powers,axp813-ac-power-supply", |
|
.num_resources = ARRAY_SIZE(axp20x_ac_power_supply_resources), |
|
.resources = axp20x_ac_power_supply_resources, |
|
}, { |
|
.name = "axp20x-usb-power-supply", |
|
.num_resources = ARRAY_SIZE(axp803_usb_power_supply_resources), |
|
.resources = axp803_usb_power_supply_resources, |
|
.of_compatible = "x-powers,axp813-usb-power-supply", |
|
}, |
|
{ .name = "axp20x-regulator" }, |
|
}; |
|
|
|
static const struct mfd_cell axp806_self_working_cells[] = { |
|
{ |
|
.name = "axp221-pek", |
|
.num_resources = ARRAY_SIZE(axp806_pek_resources), |
|
.resources = axp806_pek_resources, |
|
}, |
|
{ .name = "axp20x-regulator" }, |
|
}; |
|
|
|
static const struct mfd_cell axp806_cells[] = { |
|
{ |
|
.id = 2, |
|
.name = "axp20x-regulator", |
|
}, |
|
}; |
|
|
|
static const struct mfd_cell axp809_cells[] = { |
|
{ |
|
.name = "axp221-pek", |
|
.num_resources = ARRAY_SIZE(axp809_pek_resources), |
|
.resources = axp809_pek_resources, |
|
}, { |
|
.id = 1, |
|
.name = "axp20x-regulator", |
|
}, |
|
}; |
|
|
|
static const struct mfd_cell axp813_cells[] = { |
|
{ |
|
.name = "axp221-pek", |
|
.num_resources = ARRAY_SIZE(axp803_pek_resources), |
|
.resources = axp803_pek_resources, |
|
}, { |
|
.name = "axp20x-regulator", |
|
}, { |
|
.name = "axp20x-gpio", |
|
.of_compatible = "x-powers,axp813-gpio", |
|
}, { |
|
.name = "axp813-adc", |
|
.of_compatible = "x-powers,axp813-adc", |
|
}, { |
|
.name = "axp20x-battery-power-supply", |
|
.of_compatible = "x-powers,axp813-battery-power-supply", |
|
}, { |
|
.name = "axp20x-ac-power-supply", |
|
.of_compatible = "x-powers,axp813-ac-power-supply", |
|
.num_resources = ARRAY_SIZE(axp20x_ac_power_supply_resources), |
|
.resources = axp20x_ac_power_supply_resources, |
|
}, { |
|
.name = "axp20x-usb-power-supply", |
|
.num_resources = ARRAY_SIZE(axp803_usb_power_supply_resources), |
|
.resources = axp803_usb_power_supply_resources, |
|
.of_compatible = "x-powers,axp813-usb-power-supply", |
|
}, |
|
}; |
|
|
|
static struct axp20x_dev *axp20x_pm_power_off; |
|
static void axp20x_power_off(void) |
|
{ |
|
if (axp20x_pm_power_off->variant == AXP288_ID) |
|
return; |
|
|
|
regmap_write(axp20x_pm_power_off->regmap, AXP20X_OFF_CTRL, |
|
AXP20X_OFF); |
|
|
|
/* Give capacitors etc. time to drain to avoid kernel panic msg. */ |
|
msleep(500); |
|
} |
|
|
|
int axp20x_match_device(struct axp20x_dev *axp20x) |
|
{ |
|
struct device *dev = axp20x->dev; |
|
const struct acpi_device_id *acpi_id; |
|
const struct of_device_id *of_id; |
|
|
|
if (dev->of_node) { |
|
of_id = of_match_device(dev->driver->of_match_table, dev); |
|
if (!of_id) { |
|
dev_err(dev, "Unable to match OF ID\n"); |
|
return -ENODEV; |
|
} |
|
axp20x->variant = (long)of_id->data; |
|
} else { |
|
acpi_id = acpi_match_device(dev->driver->acpi_match_table, dev); |
|
if (!acpi_id || !acpi_id->driver_data) { |
|
dev_err(dev, "Unable to match ACPI ID and data\n"); |
|
return -ENODEV; |
|
} |
|
axp20x->variant = (long)acpi_id->driver_data; |
|
} |
|
|
|
switch (axp20x->variant) { |
|
case AXP152_ID: |
|
axp20x->nr_cells = ARRAY_SIZE(axp152_cells); |
|
axp20x->cells = axp152_cells; |
|
axp20x->regmap_cfg = &axp152_regmap_config; |
|
axp20x->regmap_irq_chip = &axp152_regmap_irq_chip; |
|
break; |
|
case AXP202_ID: |
|
case AXP209_ID: |
|
axp20x->nr_cells = ARRAY_SIZE(axp20x_cells); |
|
axp20x->cells = axp20x_cells; |
|
axp20x->regmap_cfg = &axp20x_regmap_config; |
|
axp20x->regmap_irq_chip = &axp20x_regmap_irq_chip; |
|
break; |
|
case AXP221_ID: |
|
axp20x->nr_cells = ARRAY_SIZE(axp221_cells); |
|
axp20x->cells = axp221_cells; |
|
axp20x->regmap_cfg = &axp22x_regmap_config; |
|
axp20x->regmap_irq_chip = &axp22x_regmap_irq_chip; |
|
break; |
|
case AXP223_ID: |
|
axp20x->nr_cells = ARRAY_SIZE(axp223_cells); |
|
axp20x->cells = axp223_cells; |
|
axp20x->regmap_cfg = &axp22x_regmap_config; |
|
axp20x->regmap_irq_chip = &axp22x_regmap_irq_chip; |
|
break; |
|
case AXP288_ID: |
|
axp20x->cells = axp288_cells; |
|
axp20x->nr_cells = ARRAY_SIZE(axp288_cells); |
|
axp20x->regmap_cfg = &axp288_regmap_config; |
|
axp20x->regmap_irq_chip = &axp288_regmap_irq_chip; |
|
axp20x->irq_flags = IRQF_TRIGGER_LOW; |
|
break; |
|
case AXP803_ID: |
|
axp20x->nr_cells = ARRAY_SIZE(axp803_cells); |
|
axp20x->cells = axp803_cells; |
|
axp20x->regmap_cfg = &axp288_regmap_config; |
|
axp20x->regmap_irq_chip = &axp803_regmap_irq_chip; |
|
break; |
|
case AXP806_ID: |
|
if (of_property_read_bool(axp20x->dev->of_node, |
|
"x-powers,self-working-mode")) { |
|
axp20x->nr_cells = ARRAY_SIZE(axp806_self_working_cells); |
|
axp20x->cells = axp806_self_working_cells; |
|
} else { |
|
axp20x->nr_cells = ARRAY_SIZE(axp806_cells); |
|
axp20x->cells = axp806_cells; |
|
} |
|
axp20x->regmap_cfg = &axp806_regmap_config; |
|
axp20x->regmap_irq_chip = &axp806_regmap_irq_chip; |
|
break; |
|
case AXP809_ID: |
|
axp20x->nr_cells = ARRAY_SIZE(axp809_cells); |
|
axp20x->cells = axp809_cells; |
|
axp20x->regmap_cfg = &axp22x_regmap_config; |
|
axp20x->regmap_irq_chip = &axp809_regmap_irq_chip; |
|
break; |
|
case AXP813_ID: |
|
axp20x->nr_cells = ARRAY_SIZE(axp813_cells); |
|
axp20x->cells = axp813_cells; |
|
axp20x->regmap_cfg = &axp288_regmap_config; |
|
/* |
|
* The IRQ table given in the datasheet is incorrect. |
|
* In IRQ enable/status registers 1, there are separate |
|
* IRQs for ACIN and VBUS, instead of bits [7:5] being |
|
* the same as bits [4:2]. So it shares the same IRQs |
|
* as the AXP803, rather than the AXP288. |
|
*/ |
|
axp20x->regmap_irq_chip = &axp803_regmap_irq_chip; |
|
break; |
|
default: |
|
dev_err(dev, "unsupported AXP20X ID %lu\n", axp20x->variant); |
|
return -EINVAL; |
|
} |
|
dev_info(dev, "AXP20x variant %s found\n", |
|
axp20x_model_names[axp20x->variant]); |
|
|
|
return 0; |
|
} |
|
EXPORT_SYMBOL(axp20x_match_device); |
|
|
|
int axp20x_device_probe(struct axp20x_dev *axp20x) |
|
{ |
|
int ret; |
|
|
|
/* |
|
* The AXP806 supports either master/standalone or slave mode. |
|
* Slave mode allows sharing the serial bus, even with multiple |
|
* AXP806 which all have the same hardware address. |
|
* |
|
* This is done with extra "serial interface address extension", |
|
* or AXP806_BUS_ADDR_EXT, and "register address extension", or |
|
* AXP806_REG_ADDR_EXT, registers. The former is read-only, with |
|
* 1 bit customizable at the factory, and 1 bit depending on the |
|
* state of an external pin. The latter is writable. The device |
|
* will only respond to operations to its other registers when |
|
* the these device addressing bits (in the upper 4 bits of the |
|
* registers) match. |
|
* |
|
* By default we support an AXP806 chained to an AXP809 in slave |
|
* mode. Boards which use an AXP806 in master mode can set the |
|
* property "x-powers,master-mode" to override the default. |
|
*/ |
|
if (axp20x->variant == AXP806_ID) { |
|
if (of_property_read_bool(axp20x->dev->of_node, |
|
"x-powers,master-mode") || |
|
of_property_read_bool(axp20x->dev->of_node, |
|
"x-powers,self-working-mode")) |
|
regmap_write(axp20x->regmap, AXP806_REG_ADDR_EXT, |
|
AXP806_REG_ADDR_EXT_ADDR_MASTER_MODE); |
|
else |
|
regmap_write(axp20x->regmap, AXP806_REG_ADDR_EXT, |
|
AXP806_REG_ADDR_EXT_ADDR_SLAVE_MODE); |
|
} |
|
|
|
ret = regmap_add_irq_chip(axp20x->regmap, axp20x->irq, |
|
IRQF_ONESHOT | IRQF_SHARED | axp20x->irq_flags, |
|
-1, axp20x->regmap_irq_chip, &axp20x->regmap_irqc); |
|
if (ret) { |
|
dev_err(axp20x->dev, "failed to add irq chip: %d\n", ret); |
|
return ret; |
|
} |
|
|
|
ret = mfd_add_devices(axp20x->dev, -1, axp20x->cells, |
|
axp20x->nr_cells, NULL, 0, NULL); |
|
|
|
if (ret) { |
|
dev_err(axp20x->dev, "failed to add MFD devices: %d\n", ret); |
|
regmap_del_irq_chip(axp20x->irq, axp20x->regmap_irqc); |
|
return ret; |
|
} |
|
|
|
if (!pm_power_off) { |
|
axp20x_pm_power_off = axp20x; |
|
pm_power_off = axp20x_power_off; |
|
} |
|
|
|
dev_info(axp20x->dev, "AXP20X driver loaded\n"); |
|
|
|
return 0; |
|
} |
|
EXPORT_SYMBOL(axp20x_device_probe); |
|
|
|
void axp20x_device_remove(struct axp20x_dev *axp20x) |
|
{ |
|
if (axp20x == axp20x_pm_power_off) { |
|
axp20x_pm_power_off = NULL; |
|
pm_power_off = NULL; |
|
} |
|
|
|
mfd_remove_devices(axp20x->dev); |
|
regmap_del_irq_chip(axp20x->irq, axp20x->regmap_irqc); |
|
} |
|
EXPORT_SYMBOL(axp20x_device_remove); |
|
|
|
MODULE_DESCRIPTION("PMIC MFD core driver for AXP20X"); |
|
MODULE_AUTHOR("Carlo Caione <[email protected]>"); |
|
MODULE_LICENSE("GPL");
|
|
|