forked from Qortal/Brooklyn
You can not select more than 25 topics
Topics must start with a letter or number, can include dashes ('-') and can be up to 35 characters long.
83 lines
3.8 KiB
83 lines
3.8 KiB
Kernel Driver Lochnagar |
|
======================= |
|
|
|
Supported systems: |
|
* Cirrus Logic : Lochnagar 2 |
|
|
|
Author: Lucas A. Tanure Alves |
|
|
|
Description |
|
----------- |
|
|
|
Lochnagar 2 features built-in Current Monitor circuitry that allows for the |
|
measurement of both voltage and current on up to eight of the supply voltage |
|
rails provided to the minicards. The Current Monitor does not require any |
|
hardware modifications or external circuitry to operate. |
|
|
|
The current and voltage measurements are obtained through the standard register |
|
map interface to the Lochnagar board controller, and can therefore be monitored |
|
by software. |
|
|
|
Sysfs attributes |
|
---------------- |
|
|
|
======================= ======================================================= |
|
temp1_input The Lochnagar board temperature (milliCelsius) |
|
in0_input Measured voltage for DBVDD1 (milliVolts) |
|
in0_label "DBVDD1" |
|
curr1_input Measured current for DBVDD1 (milliAmps) |
|
curr1_label "DBVDD1" |
|
power1_average Measured average power for DBVDD1 (microWatts) |
|
power1_average_interval Power averaging time input valid from 1 to 1708mS |
|
power1_label "DBVDD1" |
|
in1_input Measured voltage for 1V8 DSP (milliVolts) |
|
in1_label "1V8 DSP" |
|
curr2_input Measured current for 1V8 DSP (milliAmps) |
|
curr2_label "1V8 DSP" |
|
power2_average Measured average power for 1V8 DSP (microWatts) |
|
power2_average_interval Power averaging time input valid from 1 to 1708mS |
|
power2_label "1V8 DSP" |
|
in2_input Measured voltage for 1V8 CDC (milliVolts) |
|
in2_label "1V8 CDC" |
|
curr3_input Measured current for 1V8 CDC (milliAmps) |
|
curr3_label "1V8 CDC" |
|
power3_average Measured average power for 1V8 CDC (microWatts) |
|
power3_average_interval Power averaging time input valid from 1 to 1708mS |
|
power3_label "1V8 CDC" |
|
in3_input Measured voltage for VDDCORE DSP (milliVolts) |
|
in3_label "VDDCORE DSP" |
|
curr4_input Measured current for VDDCORE DSP (milliAmps) |
|
curr4_label "VDDCORE DSP" |
|
power4_average Measured average power for VDDCORE DSP (microWatts) |
|
power4_average_interval Power averaging time input valid from 1 to 1708mS |
|
power4_label "VDDCORE DSP" |
|
in4_input Measured voltage for AVDD 1V8 (milliVolts) |
|
in4_label "AVDD 1V8" |
|
curr5_input Measured current for AVDD 1V8 (milliAmps) |
|
curr5_label "AVDD 1V8" |
|
power5_average Measured average power for AVDD 1V8 (microWatts) |
|
power5_average_interval Power averaging time input valid from 1 to 1708mS |
|
power5_label "AVDD 1V8" |
|
curr6_input Measured current for SYSVDD (milliAmps) |
|
curr6_label "SYSVDD" |
|
power6_average Measured average power for SYSVDD (microWatts) |
|
power6_average_interval Power averaging time input valid from 1 to 1708mS |
|
power6_label "SYSVDD" |
|
in6_input Measured voltage for VDDCORE CDC (milliVolts) |
|
in6_label "VDDCORE CDC" |
|
curr7_input Measured current for VDDCORE CDC (milliAmps) |
|
curr7_label "VDDCORE CDC" |
|
power7_average Measured average power for VDDCORE CDC (microWatts) |
|
power7_average_interval Power averaging time input valid from 1 to 1708mS |
|
power7_label "VDDCORE CDC" |
|
in7_input Measured voltage for MICVDD (milliVolts) |
|
in7_label "MICVDD" |
|
curr8_input Measured current for MICVDD (milliAmps) |
|
curr8_label "MICVDD" |
|
power8_average Measured average power for MICVDD (microWatts) |
|
power8_average_interval Power averaging time input valid from 1 to 1708mS |
|
power8_label "MICVDD" |
|
======================= ======================================================= |
|
|
|
Note: |
|
It is not possible to measure voltage on the SYSVDD rail.
|
|
|