forked from Qortal/Brooklyn
You can not select more than 25 topics
Topics must start with a letter or number, can include dashes ('-') and can be up to 35 characters long.
57 lines
1.7 KiB
57 lines
1.7 KiB
Kernel driver da9055 |
|
==================== |
|
|
|
Supported chips: |
|
* Dialog Semiconductors DA9055 PMIC |
|
|
|
Prefix: 'da9055' |
|
|
|
Datasheet: Datasheet is not publicly available. |
|
|
|
Authors: David Dajun Chen <[email protected]> |
|
|
|
Description |
|
----------- |
|
|
|
The DA9055 provides an Analogue to Digital Converter (ADC) with 10 bits |
|
resolution and track and hold circuitry combined with an analogue input |
|
multiplexer. The analogue input multiplexer will allow conversion of up to 5 |
|
different inputs. The track and hold circuit ensures stable input voltages at |
|
the input of the ADC during the conversion. |
|
|
|
The ADC is used to measure the following inputs: |
|
|
|
- Channel 0: VDDOUT - measurement of the system voltage |
|
- Channel 1: ADC_IN1 - high impedance input (0 - 2.5V) |
|
- Channel 2: ADC_IN2 - high impedance input (0 - 2.5V) |
|
- Channel 3: ADC_IN3 - high impedance input (0 - 2.5V) |
|
- Channel 4: Internal Tjunc. - sense (internal temp. sensor) |
|
|
|
By using sysfs attributes we can measure the system voltage VDDOUT, |
|
chip junction temperature and auxiliary channels voltages. |
|
|
|
Voltage Monitoring |
|
------------------ |
|
|
|
Voltages are sampled in a AUTO mode it can be manually sampled too and results |
|
are stored in a 10 bit ADC. |
|
|
|
The system voltage is calculated as: |
|
|
|
Milli volt = ((ADC value * 1000) / 85) + 2500 |
|
|
|
The voltages on ADC channels 1, 2 and 3 are calculated as: |
|
|
|
Milli volt = (ADC value * 1000) / 102 |
|
|
|
Temperature Monitoring |
|
---------------------- |
|
|
|
Temperatures are sampled by a 10 bit ADC. Junction temperatures |
|
are monitored by the ADC channels. |
|
|
|
The junction temperature is calculated: |
|
|
|
Degrees celsius = -0.4084 * (ADC_RES - T_OFFSET) + 307.6332 |
|
|
|
The junction temperature attribute is supported by the driver.
|
|
|