forked from Qortal/Brooklyn
7d3018da4c
* NVME, SATA NAND Security added * Qortal Core exception fetcher is now redone. * Update DT overlays for firmware * Fix for bvb clockj settings * Fix for no audio for sissy desktop porn watchers -_- ( thanks crowetic for watching gay porn and reporting me that bug asshat ) * Normalize the fetch() stream while doing a peer to peer handshake for nodes * Fix for RNG token editing error while performing a SHA256 encryption * Now under voltage errors will blink red led constantly for 5 minutes then go solid. * Improve kernel thread scaling for Qortal 2.0 core * HDMI circuit is now enabled at power up instead. * Added KMS * Added line replication instead of interpolation for VC4 GPU resulting in slightly better frame rates * Fix for long and doubles * Backplane clock is now set at standard rate * Capped HVEC clocks * Add support for Creative Cinema webcam for donkers who like sharing dick pics. *looks at crowetic* * More scanline XGA modes for people who have weird ass monitors of all sorts. * TX/RX flow control support is now 100% stable. No lags over 1Gbps ethernet. ( Hello Qortal 3.0 ) * Using flush cache instead of fetch for QC 2.0 resulting in performance gains * VC4 clock is now enforced for desktop oriented images. * Ondemand governor now waits for 2 seconds instead of 0.5ms to scale down to the lowest safest clock freq preventing lags to the core. * Timeout of OC set at 35ms from 90ms resulting in way better clocks and sync for Qortal 2.0 core
43 lines
1.3 KiB
Makefile
43 lines
1.3 KiB
Makefile
# SPDX-License-Identifier: GPL-2.0
|
|
#
|
|
# Makefile for the bus drivers.
|
|
#
|
|
|
|
# Interconnect bus drivers for ARM platforms
|
|
obj-$(CONFIG_ARM_CCI) += arm-cci.o
|
|
obj-$(CONFIG_ARM_INTEGRATOR_LM) += arm-integrator-lm.o
|
|
obj-$(CONFIG_HISILICON_LPC) += hisi_lpc.o
|
|
obj-$(CONFIG_BRCMSTB_GISB_ARB) += brcmstb_gisb.o
|
|
obj-$(CONFIG_MOXTET) += moxtet.o
|
|
|
|
# DPAA2 fsl-mc bus
|
|
obj-$(CONFIG_FSL_MC_BUS) += fsl-mc/
|
|
|
|
obj-$(CONFIG_BT1_APB) += bt1-apb.o
|
|
obj-$(CONFIG_BT1_AXI) += bt1-axi.o
|
|
obj-$(CONFIG_IMX_WEIM) += imx-weim.o
|
|
obj-$(CONFIG_INTEL_IXP4XX_EB) += intel-ixp4xx-eb.o
|
|
obj-$(CONFIG_MIPS_CDMM) += mips_cdmm.o
|
|
obj-$(CONFIG_MVEBU_MBUS) += mvebu-mbus.o
|
|
|
|
# Interconnect bus driver for OMAP SoCs.
|
|
obj-$(CONFIG_OMAP_INTERCONNECT) += omap_l3_smx.o omap_l3_noc.o
|
|
|
|
obj-$(CONFIG_OMAP_OCP2SCP) += omap-ocp2scp.o
|
|
obj-$(CONFIG_QCOM_EBI2) += qcom-ebi2.o
|
|
obj-$(CONFIG_SUN50I_DE2_BUS) += sun50i-de2.o
|
|
obj-$(CONFIG_SUNXI_RSB) += sunxi-rsb.o
|
|
obj-$(CONFIG_OF) += simple-pm-bus.o
|
|
obj-$(CONFIG_TEGRA_ACONNECT) += tegra-aconnect.o
|
|
obj-$(CONFIG_TEGRA_GMI) += tegra-gmi.o
|
|
obj-$(CONFIG_TI_PWMSS) += ti-pwmss.o
|
|
obj-$(CONFIG_TI_SYSC) += ti-sysc.o
|
|
obj-$(CONFIG_TS_NBUS) += ts-nbus.o
|
|
obj-$(CONFIG_UNIPHIER_SYSTEM_BUS) += uniphier-system-bus.o
|
|
obj-$(CONFIG_VEXPRESS_CONFIG) += vexpress-config.o
|
|
|
|
obj-$(CONFIG_DA8XX_MSTPRI) += da8xx-mstpri.o
|
|
|
|
# MHI
|
|
obj-$(CONFIG_MHI_BUS) += mhi/
|