forked from Qortal/Brooklyn
You can not select more than 25 topics
Topics must start with a letter or number, can include dashes ('-') and can be up to 35 characters long.
36 lines
1.1 KiB
36 lines
1.1 KiB
ST USB OHCI controller |
|
|
|
Required properties: |
|
|
|
- compatible : must be "st,st-ohci-300x" |
|
- reg : physical base addresses of the controller and length of memory mapped |
|
region |
|
- interrupts : one OHCI controller interrupt should be described here |
|
- clocks : phandle list of usb clocks |
|
- clock-names : should be "ic" for interconnect clock and "clk48" |
|
See: Documentation/devicetree/bindings/clock/clock-bindings.txt |
|
|
|
- phys : phandle for the PHY device |
|
- phy-names : should be "usb" |
|
|
|
- resets : phandle to the powerdown and reset controller for the USB IP |
|
- reset-names : should be "power" and "softreset". |
|
See: Documentation/devicetree/bindings/reset/st,sti-powerdown.txt |
|
See: Documentation/devicetree/bindings/reset/reset.txt |
|
|
|
Example: |
|
|
|
ohci0: usb@fe1ffc00 { |
|
compatible = "st,st-ohci-300x"; |
|
reg = <0xfe1ffc00 0x100>; |
|
interrupts = <GIC_SPI 149 IRQ_TYPE_NONE>; |
|
clocks = <&clk_s_a1_ls 0>, |
|
<&clockgen_b0 0>; |
|
clock-names = "ic", "clk48"; |
|
phys = <&usb2_phy>; |
|
phy-names = "usb"; |
|
|
|
resets = <&powerdown STIH416_USB0_POWERDOWN>, |
|
<&softreset STIH416_USB0_SOFTRESET>; |
|
reset-names = "power", "softreset"; |
|
};
|
|
|