forked from Qortal/Brooklyn
You can not select more than 25 topics
Topics must start with a letter or number, can include dashes ('-') and can be up to 35 characters long.
41 lines
1.3 KiB
41 lines
1.3 KiB
STMicroelectronics Co-Processor Bindings |
|
---------------------------------------- |
|
|
|
This binding provides support for adjunct processors found on ST SoCs. |
|
|
|
Co-processors can be controlled from the bootloader or the primary OS. If |
|
the bootloader starts a co-processor, the primary OS must detect its state |
|
and act accordingly. |
|
|
|
Required properties: |
|
- compatible Should be one of: |
|
"st,st231-rproc" |
|
"st,st40-rproc" |
|
- memory-region Reserved memory (See: ../reserved-memory/reserved-memory.txt) |
|
- resets Reset lines (See: ../reset/reset.txt) |
|
- reset-names Must be "sw_reset" and "pwr_reset" |
|
- clocks Clock for co-processor (See: ../clock/clock-bindings.txt) |
|
- clock-frequency Clock frequency to set co-processor at if the bootloader |
|
hasn't already done so |
|
- st,syscfg System configuration register which holds the boot vector |
|
for the co-processor |
|
1st cell: Phandle to syscon block |
|
2nd cell: Boot vector register offset |
|
|
|
Example: |
|
|
|
audio_reserved: rproc@42000000 { |
|
compatible = "shared-dma-pool"; |
|
reg = <0x42000000 0x01000000>; |
|
no-map; |
|
}; |
|
|
|
st231-audio { |
|
compatible = "st,st231-rproc"; |
|
memory-region = <&audio_reserved>; |
|
resets = <&softreset STIH407_ST231_AUD_SOFTRESET>; |
|
reset-names = "sw_reset"; |
|
clocks = <&clk_s_c0_flexgen CLK_ST231_AUD_0>; |
|
clock-frequency = <600000000>; |
|
st,syscfg = <&syscfg_core 0x228>; |
|
};
|
|
|