forked from Qortal/Brooklyn
You can not select more than 25 topics
Topics must start with a letter or number, can include dashes ('-') and can be up to 35 characters long.
208 lines
7.4 KiB
208 lines
7.4 KiB
Qualcomm MSM8996 TLMM block |
|
|
|
This binding describes the Top Level Mode Multiplexer block found in the |
|
MSM8996 platform. |
|
|
|
- compatible: |
|
Usage: required |
|
Value type: <string> |
|
Definition: must be "qcom,msm8996-pinctrl" |
|
|
|
- reg: |
|
Usage: required |
|
Value type: <prop-encoded-array> |
|
Definition: the base address and size of the TLMM register space. |
|
|
|
- interrupts: |
|
Usage: required |
|
Value type: <prop-encoded-array> |
|
Definition: should specify the TLMM summary IRQ. |
|
|
|
- interrupt-controller: |
|
Usage: required |
|
Value type: <none> |
|
Definition: identifies this node as an interrupt controller |
|
|
|
- #interrupt-cells: |
|
Usage: required |
|
Value type: <u32> |
|
Definition: must be 2. Specifying the pin number and flags, as defined |
|
in <dt-bindings/interrupt-controller/irq.h> |
|
|
|
- gpio-controller: |
|
Usage: required |
|
Value type: <none> |
|
Definition: identifies this node as a gpio controller |
|
|
|
- #gpio-cells: |
|
Usage: required |
|
Value type: <u32> |
|
Definition: must be 2. Specifying the pin number and flags, as defined |
|
in <dt-bindings/gpio/gpio.h> |
|
|
|
- gpio-ranges: |
|
Usage: required |
|
Definition: see ../gpio/gpio.txt |
|
|
|
- gpio-reserved-ranges: |
|
Usage: optional |
|
Definition: see ../gpio/gpio.txt |
|
|
|
Please refer to ../gpio/gpio.txt and ../interrupt-controller/interrupts.txt for |
|
a general description of GPIO and interrupt bindings. |
|
|
|
Please refer to pinctrl-bindings.txt in this directory for details of the |
|
common pinctrl bindings used by client devices, including the meaning of the |
|
phrase "pin configuration node". |
|
|
|
The pin configuration nodes act as a container for an arbitrary number of |
|
subnodes. Each of these subnodes represents some desired configuration for a |
|
pin, a group, or a list of pins or groups. This configuration can include the |
|
mux function to select on those pin(s)/group(s), and various pin configuration |
|
parameters, such as pull-up, drive strength, etc. |
|
|
|
|
|
PIN CONFIGURATION NODES: |
|
|
|
The name of each subnode is not important; all subnodes should be enumerated |
|
and processed purely based on their content. |
|
|
|
Each subnode only affects those parameters that are explicitly listed. In |
|
other words, a subnode that lists a mux function but no pin configuration |
|
parameters implies no information about any pin configuration parameters. |
|
Similarly, a pin subnode that describes a pullup parameter implies no |
|
information about e.g. the mux function. |
|
|
|
|
|
The following generic properties as defined in pinctrl-bindings.txt are valid |
|
to specify in a pin configuration subnode: |
|
|
|
- pins: |
|
Usage: required |
|
Value type: <string-array> |
|
Definition: List of gpio pins affected by the properties specified in |
|
this subnode. |
|
|
|
Valid pins are: |
|
gpio0-gpio149 |
|
Supports mux, bias and drive-strength |
|
|
|
sdc1_clk, sdc1_cmd, sdc1_data sdc2_clk, sdc2_cmd, |
|
sdc2_data sdc1_rclk |
|
Supports bias and drive-strength |
|
|
|
- function: |
|
Usage: required |
|
Value type: <string> |
|
Definition: Specify the alternative function to be configured for the |
|
specified pins. Functions are only valid for gpio pins. |
|
Valid values are: |
|
|
|
blsp_uart1, blsp_spi1, blsp_i2c1, blsp_uim1, atest_tsens, |
|
bimc_dte1, dac_calib0, blsp_spi8, blsp_uart8, blsp_uim8, |
|
qdss_cti_trig_out_b, bimc_dte0, dac_calib1, qdss_cti_trig_in_b, |
|
dac_calib2, atest_tsens2, atest_usb1, blsp_spi10, blsp_uart10, |
|
blsp_uim10, atest_bbrx1, atest_usb13, atest_bbrx0, atest_usb12, |
|
mdp_vsync, edp_lcd, blsp_i2c10, atest_gpsadc1, atest_usb11, |
|
atest_gpsadc0, edp_hot, atest_usb10, m_voc, dac_gpio, atest_char, |
|
cam_mclk, pll_bypassnl, qdss_stm7, blsp_i2c8, qdss_tracedata_b, |
|
pll_reset, qdss_stm6, qdss_stm5, qdss_stm4, atest_usb2, cci_i2c, |
|
qdss_stm3, dac_calib3, atest_usb23, atest_char3, dac_calib4, |
|
qdss_stm2, atest_usb22, atest_char2, qdss_stm1, dac_calib5, |
|
atest_usb21, atest_char1, dbg_out, qdss_stm0, dac_calib6, |
|
atest_usb20, atest_char0, dac_calib10, qdss_stm10, |
|
qdss_cti_trig_in_a, cci_timer4, blsp_spi6, blsp_uart6, blsp_uim6, |
|
blsp2_spi, qdss_stm9, qdss_cti_trig_out_a, dac_calib11, |
|
qdss_stm8, cci_timer0, qdss_stm13, dac_calib7, cci_timer1, |
|
qdss_stm12, dac_calib8, cci_timer2, blsp1_spi, qdss_stm11, |
|
dac_calib9, cci_timer3, cci_async, dac_calib12, blsp_i2c6, |
|
qdss_tracectl_a, dac_calib13, qdss_traceclk_a, dac_calib14, |
|
dac_calib15, hdmi_rcv, dac_calib16, hdmi_cec, pwr_modem, |
|
dac_calib17, hdmi_ddc, pwr_nav, dac_calib18, pwr_crypto, |
|
dac_calib19, hdmi_hot, dac_calib20, dac_calib21, pci_e0, |
|
dac_calib22, dac_calib23, dac_calib24, tsif1_sync, dac_calib25, |
|
sd_write, tsif1_error, blsp_spi2, blsp_uart2, blsp_uim2, |
|
qdss_cti, blsp_i2c2, blsp_spi3, blsp_uart3, blsp_uim3, blsp_i2c3, |
|
uim3, blsp_spi9, blsp_uart9, blsp_uim9, blsp10_spi, blsp_i2c9, |
|
blsp_spi7, blsp_uart7, blsp_uim7, qdss_tracedata_a, blsp_i2c7, |
|
qua_mi2s, gcc_gp1_clk_a, ssc_irq, uim4, blsp_spi11, blsp_uart11, |
|
blsp_uim11, gcc_gp2_clk_a, gcc_gp3_clk_a, blsp_i2c11, cri_trng0, |
|
cri_trng1, cri_trng, qdss_stm18, pri_mi2s, qdss_stm17, blsp_spi4, |
|
blsp_uart4, blsp_uim4, qdss_stm16, qdss_stm15, blsp_i2c4, |
|
qdss_stm14, dac_calib26, spkr_i2s, audio_ref, lpass_slimbus, |
|
isense_dbg, tsense_pwm1, tsense_pwm2, btfm_slimbus, ter_mi2s, |
|
qdss_stm22, qdss_stm21, qdss_stm20, qdss_stm19, gcc_gp1_clk_b, |
|
sec_mi2s, blsp_spi5, blsp_uart5, blsp_uim5, gcc_gp2_clk_b, |
|
gcc_gp3_clk_b, blsp_i2c5, blsp_spi12, blsp_uart12, blsp_uim12, |
|
qdss_stm25, qdss_stm31, blsp_i2c12, qdss_stm30, qdss_stm29, |
|
tsif1_clk, qdss_stm28, tsif1_en, tsif1_data, sdc4_cmd, qdss_stm27, |
|
qdss_traceclk_b, tsif2_error, sdc43, vfr_1, qdss_stm26, tsif2_clk, |
|
sdc4_clk, qdss_stm24, tsif2_en, sdc42, qdss_stm23, qdss_tracectl_b, |
|
sd_card, tsif2_data, sdc41, tsif2_sync, sdc40, mdp_vsync_p_b, |
|
ldo_en, mdp_vsync_s_b, ldo_update, blsp11_uart_tx_b, blsp11_uart_rx_b, |
|
blsp11_i2c_sda_b, prng_rosc, blsp11_i2c_scl_b, uim2, uim1, uim_batt, |
|
pci_e2, pa_indicator, adsp_ext, ddr_bist, qdss_tracedata_11, |
|
qdss_tracedata_12, modem_tsync, nav_dr, nav_pps, pci_e1, gsm_tx, |
|
qspi_cs, ssbi2, ssbi1, mss_lte, qspi_clk, qspi0, qspi1, qspi2, qspi3, |
|
gpio |
|
|
|
- bias-disable: |
|
Usage: optional |
|
Value type: <none> |
|
Definition: The specified pins should be configured as no pull. |
|
|
|
- bias-pull-down: |
|
Usage: optional |
|
Value type: <none> |
|
Definition: The specified pins should be configured as pull down. |
|
|
|
- bias-pull-up: |
|
Usage: optional |
|
Value type: <none> |
|
Definition: The specified pins should be configured as pull up. |
|
|
|
- output-high: |
|
Usage: optional |
|
Value type: <none> |
|
Definition: The specified pins are configured in output mode, driven |
|
high. |
|
Not valid for sdc pins. |
|
|
|
- output-low: |
|
Usage: optional |
|
Value type: <none> |
|
Definition: The specified pins are configured in output mode, driven |
|
low. |
|
Not valid for sdc pins. |
|
|
|
- drive-strength: |
|
Usage: optional |
|
Value type: <u32> |
|
Definition: Selects the drive strength for the specified pins, in mA. |
|
Valid values are: 2, 4, 6, 8, 10, 12, 14 and 16 |
|
|
|
Example: |
|
|
|
tlmm: pinctrl@1010000 { |
|
compatible = "qcom,msm8996-pinctrl"; |
|
reg = <0x01010000 0x300000>; |
|
interrupts = <0 208 0>; |
|
gpio-controller; |
|
gpio-ranges = <&tlmm 0 0 150>; |
|
#gpio-cells = <2>; |
|
interrupt-controller; |
|
#interrupt-cells = <2>; |
|
|
|
uart_console_active: uart_console_active { |
|
mux { |
|
pins = "gpio4", "gpio5"; |
|
function = "blsp_uart8"; |
|
}; |
|
|
|
config { |
|
pins = "gpio4", "gpio5"; |
|
drive-strength = <2>; |
|
bias-disable; |
|
}; |
|
}; |
|
};
|
|
|