forked from Qortal/Brooklyn
You can not select more than 25 topics
Topics must start with a letter or number, can include dashes ('-') and can be up to 35 characters long.
204 lines
6.4 KiB
204 lines
6.4 KiB
# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause |
|
%YAML 1.2 |
|
--- |
|
$id: http://devicetree.org/schemas/mfd/rohm,bd71828-pmic.yaml# |
|
$schema: http://devicetree.org/meta-schemas/core.yaml# |
|
|
|
title: ROHM BD71828 Power Management Integrated Circuit bindings |
|
|
|
maintainers: |
|
- Matti Vaittinen <[email protected]> |
|
|
|
description: | |
|
BD71828GW is a single-chip power management IC for battery-powered portable |
|
devices. The IC integrates 7 buck converters, 7 LDOs, and a 1500 mA |
|
single-cell linear charger. Also included is a Coulomb counter, a real-time |
|
clock (RTC), and a 32.768 kHz clock gate. |
|
|
|
properties: |
|
compatible: |
|
const: rohm,bd71828 |
|
|
|
reg: |
|
description: |
|
I2C slave address. |
|
maxItems: 1 |
|
|
|
interrupts: |
|
maxItems: 1 |
|
|
|
gpio-controller: true |
|
|
|
"#gpio-cells": |
|
const: 2 |
|
description: | |
|
The first cell is the pin number and the second cell is used to specify |
|
flags. See ../gpio/gpio.txt for more information. |
|
|
|
clocks: |
|
maxItems: 1 |
|
|
|
"#clock-cells": |
|
const: 0 |
|
|
|
clock-output-names: |
|
const: bd71828-32k-out |
|
|
|
rohm,clkout-open-drain: |
|
description: clk32kout mode. Set to 1 for "open-drain" or 0 for "cmos". |
|
$ref: "/schemas/types.yaml#/definitions/uint32" |
|
minimum: 0 |
|
maximum: 1 |
|
|
|
rohm,charger-sense-resistor-ohms: |
|
minimum: 10000000 |
|
maximum: 50000000 |
|
description: | |
|
BD71827 and BD71828 have SAR ADC for measuring charging currents. |
|
External sense resistor (RSENSE in data sheet) should be used. If some |
|
other but 30MOhm resistor is used the resistance value should be given |
|
here in Ohms. |
|
|
|
regulators: |
|
$ref: ../regulator/rohm,bd71828-regulator.yaml |
|
description: |
|
List of child nodes that specify the regulators. |
|
|
|
leds: |
|
$ref: ../leds/rohm,bd71828-leds.yaml |
|
|
|
gpio-reserved-ranges: |
|
description: | |
|
Usage of BD71828 GPIO pins can be changed via OTP. This property can be |
|
used to mark the pins which should not be configured for GPIO. Please see |
|
the ../gpio/gpio.txt for more information. |
|
|
|
required: |
|
- compatible |
|
- reg |
|
- interrupts |
|
- clocks |
|
- "#clock-cells" |
|
- regulators |
|
- gpio-controller |
|
- "#gpio-cells" |
|
|
|
additionalProperties: false |
|
|
|
examples: |
|
- | |
|
#include <dt-bindings/interrupt-controller/irq.h> |
|
#include <dt-bindings/leds/common.h> |
|
i2c { |
|
#address-cells = <1>; |
|
#size-cells = <0>; |
|
pmic: pmic@4b { |
|
compatible = "rohm,bd71828"; |
|
reg = <0x4b>; |
|
|
|
interrupt-parent = <&gpio1>; |
|
interrupts = <29 IRQ_TYPE_LEVEL_LOW>; |
|
|
|
clocks = <&osc 0>; |
|
#clock-cells = <0>; |
|
clock-output-names = "bd71828-32k-out"; |
|
|
|
gpio-controller; |
|
#gpio-cells = <2>; |
|
gpio-reserved-ranges = <0 1>, <2 1>; |
|
|
|
rohm,charger-sense-resistor-ohms = <10000000>; |
|
|
|
regulators { |
|
buck1: BUCK1 { |
|
regulator-name = "buck1"; |
|
regulator-min-microvolt = <500000>; |
|
regulator-max-microvolt = <2000000>; |
|
regulator-ramp-delay = <2500>; |
|
}; |
|
buck2: BUCK2 { |
|
regulator-name = "buck2"; |
|
regulator-min-microvolt = <500000>; |
|
regulator-max-microvolt = <2000000>; |
|
regulator-ramp-delay = <2500>; |
|
}; |
|
buck3: BUCK3 { |
|
regulator-name = "buck3"; |
|
regulator-min-microvolt = <1200000>; |
|
regulator-max-microvolt = <2000000>; |
|
}; |
|
buck4: BUCK4 { |
|
regulator-name = "buck4"; |
|
regulator-min-microvolt = <1000000>; |
|
regulator-max-microvolt = <1800000>; |
|
}; |
|
buck5: BUCK5 { |
|
regulator-name = "buck5"; |
|
regulator-min-microvolt = <2500000>; |
|
regulator-max-microvolt = <3300000>; |
|
}; |
|
buck6: BUCK6 { |
|
regulator-name = "buck6"; |
|
regulator-min-microvolt = <500000>; |
|
regulator-max-microvolt = <2000000>; |
|
regulator-ramp-delay = <2500>; |
|
}; |
|
buck7: BUCK7 { |
|
regulator-name = "buck7"; |
|
regulator-min-microvolt = <500000>; |
|
regulator-max-microvolt = <2000000>; |
|
regulator-ramp-delay = <2500>; |
|
}; |
|
ldo1: LDO1 { |
|
regulator-name = "ldo1"; |
|
regulator-min-microvolt = <800000>; |
|
regulator-max-microvolt = <3300000>; |
|
}; |
|
ldo2: LDO2 { |
|
regulator-name = "ldo2"; |
|
regulator-min-microvolt = <800000>; |
|
regulator-max-microvolt = <3300000>; |
|
}; |
|
ldo3: LDO3 { |
|
regulator-name = "ldo3"; |
|
regulator-min-microvolt = <800000>; |
|
regulator-max-microvolt = <3300000>; |
|
}; |
|
ldo4: LDO4 { |
|
regulator-name = "ldo4"; |
|
regulator-min-microvolt = <800000>; |
|
regulator-max-microvolt = <3300000>; |
|
}; |
|
ldo5: LDO5 { |
|
regulator-name = "ldo5"; |
|
regulator-min-microvolt = <800000>; |
|
regulator-max-microvolt = <3300000>; |
|
}; |
|
ldo6: LDO6 { |
|
regulator-name = "ldo6"; |
|
regulator-min-microvolt = <1800000>; |
|
regulator-max-microvolt = <1800000>; |
|
}; |
|
ldo7_reg: LDO7 { |
|
regulator-name = "ldo7"; |
|
regulator-min-microvolt = <800000>; |
|
regulator-max-microvolt = <3300000>; |
|
}; |
|
}; |
|
|
|
leds { |
|
compatible = "rohm,bd71828-leds"; |
|
|
|
led-1 { |
|
rohm,led-compatible = "bd71828-grnled"; |
|
function = LED_FUNCTION_INDICATOR; |
|
color = <LED_COLOR_ID_GREEN>; |
|
}; |
|
led-2 { |
|
rohm,led-compatible = "bd71828-ambled"; |
|
function = LED_FUNCTION_CHARGING; |
|
color = <LED_COLOR_ID_AMBER>; |
|
}; |
|
}; |
|
}; |
|
};
|
|
|