forked from Qortal/Brooklyn
You can not select more than 25 topics
Topics must start with a letter or number, can include dashes ('-') and can be up to 35 characters long.
63 lines
1.8 KiB
63 lines
1.8 KiB
* Device tree bindings for Atmel Flexcom (Flexible Serial Communication Unit) |
|
|
|
The Atmel Flexcom is just a wrapper which embeds a SPI controller, an I2C |
|
controller and an USART. Only one function can be used at a time and is chosen |
|
at boot time according to the device tree. |
|
|
|
Required properties: |
|
- compatible: Should be "atmel,sama5d2-flexcom" |
|
- reg: Should be the offset/length value for Flexcom dedicated |
|
I/O registers (without USART, TWI or SPI registers). |
|
- clocks: Should be the Flexcom peripheral clock from PMC. |
|
- #address-cells: Should be <1> |
|
- #size-cells: Should be <1> |
|
- ranges: Should be one range for the full I/O register region |
|
(including USART, TWI and SPI registers). |
|
- atmel,flexcom-mode: Should be one of the following values: |
|
- <1> for USART |
|
- <2> for SPI |
|
- <3> for I2C |
|
|
|
Required child: |
|
A single available child device of type matching the "atmel,flexcom-mode" |
|
property. |
|
|
|
The phandle provided by the clocks property of the child is the same as one for |
|
the Flexcom parent. |
|
|
|
For other properties, please refer to the documentations of the respective |
|
device: |
|
- ../serial/atmel-usart.txt |
|
- ../spi/spi_atmel.txt |
|
- ../i2c/i2c-at91.txt |
|
|
|
Example: |
|
|
|
flexcom@f8034000 { |
|
compatible = "atmel,sama5d2-flexcom"; |
|
reg = <0xf8034000 0x200>; |
|
clocks = <&flx0_clk>; |
|
#address-cells = <1>; |
|
#size-cells = <1>; |
|
ranges = <0x0 0xf8034000 0x800>; |
|
atmel,flexcom-mode = <2>; |
|
|
|
spi@400 { |
|
compatible = "atmel,at91rm9200-spi"; |
|
reg = <0x400 0x200>; |
|
interrupts = <19 IRQ_TYPE_LEVEL_HIGH 7>; |
|
pinctrl-names = "default"; |
|
pinctrl-0 = <&pinctrl_flx0_default>; |
|
#address-cells = <1>; |
|
#size-cells = <0>; |
|
clocks = <&flx0_clk>; |
|
clock-names = "spi_clk"; |
|
atmel,fifo-size = <32>; |
|
|
|
mtd_dataflash@0 { |
|
compatible = "atmel,at25f512b"; |
|
reg = <0>; |
|
spi-max-frequency = <20000000>; |
|
}; |
|
}; |
|
};
|
|
|