forked from Qortal/Brooklyn
You can not select more than 25 topics
Topics must start with a letter or number, can include dashes ('-') and can be up to 35 characters long.
37 lines
1.2 KiB
37 lines
1.2 KiB
#define BOARD_NAME "STBee" |
|
#define BOARD_ID 0x945c37e8 |
|
|
|
#define MCU_STM32F1 1 |
|
/* High-density device */ |
|
|
|
#define STM32_PLLXTPRE STM32_PLLXTPRE_DIV1 |
|
#define STM32_PLLMUL_VALUE 6 |
|
#define STM32_HSECLK 12000000 |
|
|
|
#define GPIO_LED_BASE GPIOD_BASE |
|
#define GPIO_LED_CLEAR_TO_EMIT 4 |
|
#define GPIO_USB_BASE GPIOD_BASE |
|
#define GPIO_USB_CLEAR_TO_ENABLE 3 |
|
#define GPIO_OTHER_BASE GPIOA_BASE |
|
|
|
/* |
|
* Port A setup. |
|
* PA0 - Normal input. |
|
* PA11 - Push Pull output 10MHz 0 default (until USB enabled) (USBDM) |
|
* PA12 - Push Pull output 10MHz 0 default (until USB enabled) (USBDP) |
|
*/ |
|
#define VAL_GPIO_OTHER_ODR 0xFFFFE7FF |
|
#define VAL_GPIO_OTHER_CRL 0x88888884 /* PA7...PA0 */ |
|
#define VAL_GPIO_OTHER_CRH 0x88811888 /* PA15...PA8 */ |
|
|
|
#define RCC_ENR_IOP_EN (RCC_APB2ENR_IOPAEN|RCC_APB2ENR_IOPDEN) |
|
#define RCC_RSTR_IOP_RST (RCC_APB2RSTR_IOPARST|RCC_APB2RSTR_IOPDRST) |
|
|
|
/* |
|
* Port D setup. |
|
* PD3 - Push pull output (USB_DISC 1:USB-DISABLE 0:USB-ENABLE) 2MHz |
|
* PD4 - Open Drain output 2MHz (LED1). |
|
*/ |
|
#define VAL_GPIO_LED_ODR 0xFFFFFFFF |
|
#define VAL_GPIO_LED_CRL 0x88862888 /* PD7...PD0 */ |
|
#define VAL_GPIO_LED_CRH 0x88888888 /* PD15...PD8 */
|
|
|