forked from Qortal/Brooklyn
You can not select more than 25 topics
Topics must start with a letter or number, can include dashes ('-') and can be up to 35 characters long.
1387 lines
41 KiB
1387 lines
41 KiB
2019-03-02 NIIBE Yutaka <[email protected]> |
|
|
|
* VERSION: 1.14. |
|
* doc/chopstx.texi (VERSION): 1.14. |
|
|
|
2019-03-01 NIIBE Yutaka <[email protected]> |
|
|
|
* contrib/usart-stm32f103.c (usart_config): Fix SCEN setting |
|
procedure. |
|
|
|
2019-03-01 NIIBE Yutaka <[email protected]> |
|
|
|
* contrib/usart-stm32f103.c (usart_config): Support parity error |
|
interrupt setting. |
|
(usart_init): Don't call usart_config here. |
|
* example-usb-serial/sample.c: It's application calling |
|
usart_config. |
|
|
|
2019-02-28 NIIBE Yutaka <[email protected]> |
|
|
|
* contrib/usart.h (BSCARD): New. |
|
* contrib/usart-stm32f103.c (BSCARD): Baudrate for smartcard. |
|
(usart_config_clken): New. |
|
(usart_config): Fix for MODE_SMARTCARD. |
|
|
|
* board/board-st-nucleo-f103.h: Define pins for smartcard |
|
interface. |
|
|
|
2019-02-21 NIIBE Yutaka <[email protected]> |
|
|
|
* contrib/usart.h (MODE_SMARTCARD, MODE_IRDA, MODE_IRDA_LP) |
|
(MASK_MODE): New. |
|
|
|
* contrib/usart-stm32f103.c (usart_config): Add support for |
|
those modes. |
|
|
|
2018-12-19 NIIBE Yutaka <[email protected]> |
|
|
|
* VERSION: 1.13. |
|
* doc/chopstx.texi (VERSION): 1.13. |
|
|
|
2018-12-08 NIIBE Yutaka <[email protected]> |
|
|
|
* chopstx.c (chx_timer_dequeue): Fix calculation of return value. |
|
|
|
2018-12-07 NIIBE Yutaka <[email protected]> |
|
|
|
* chopstx.c (chx_timer_dequeue): Return ticks remained. |
|
(chx_wakeup, chopstx_mutex_lock): Use return value of |
|
chx_timer_dequeue. |
|
(chx_snooze): Update *USEC_P, accordingly. |
|
|
|
2018-11-12 NIIBE Yutaka <[email protected]> |
|
|
|
* VERSION: 1.12. |
|
* doc/chopstx.texi (VERSION): 1.12. |
|
|
|
* contrib/ackbtn-stm32f103.c (ackbtn_init): Support FST-01 and |
|
FST-01G, using PA2. |
|
(ackbtn_disable): Fix to correctly clear pending interrupt. |
|
|
|
2018-11-09 NIIBE Yutaka <[email protected]> |
|
|
|
* eventflag.c (eventflag_set_mask): New. |
|
|
|
2018-10-02 NIIBE Yutaka <[email protected]> |
|
|
|
* VERSION: 1.11. |
|
* doc/chopstx.texi (VERSION): 1.11. |
|
|
|
2018-10-01 NIIBE Yutaka <[email protected]> |
|
|
|
* contrib/ackbtn-stm32f103.c (PINCFG_EDGE): New. |
|
(ackbtn_init): Use PINCFG_EDGE bit. |
|
(ackbtn_enable): Configure the edge detector here. |
|
(ackbtn_disable): Disable the edge detector. |
|
|
|
* chopstx.c (chopstx_poll): Don't clear ->ready here. |
|
(chx_cond_hook): Set ->ready = 0 when condition does |
|
not meet. |
|
(chopstx_claim_irq): Make sure clearing the interrupt. |
|
(chx_intr_hook): Add the case when ->ready == 1. |
|
(chopstx_intr_done): Set ->ready = 0. |
|
(chx_join_hook): Set ->ready = 0 when it is still alive. |
|
|
|
2018-09-29 NIIBE Yutaka <[email protected]> |
|
|
|
* VERSION: 1.10. |
|
* doc/chopstx.texi (VERSION): 1.10. |
|
|
|
2018-09-27 NIIBE Yutaka <[email protected]> |
|
|
|
* contrib/ackbtn-stm32f103.c: New. |
|
* rules.mk [USE_ACKBTN] (CSRC): Add ack-button support. |
|
|
|
2018-09-26 NIIBE Yutaka <[email protected]> |
|
|
|
Fix for chopstx_intr_done. No spurious interrupts. |
|
* contrib/adc-mkl27z.c (adc_wait_completion): Fix. |
|
* contrib/adc-stm32f103.c (adc_wait_completion): Likewise. |
|
* contrib/usart-stm32f103.c (usart_main): Likewise. |
|
* example-cdc-gnu-linux/usb-cdc.c (tty_main): Likewise. |
|
* example-cdc/usb-cdc.c (tty_main): Likewise. |
|
* example-fraucheky/main.c (usb_main): Likewise. |
|
* example-fs-bb48/touch.c (touch_get): Likewise. |
|
* example-fs-bb48/usb-cdc.c (tty_main): Likewise. |
|
* example-primer2/primer2-ts.c (adc3_conversion): Likewise. |
|
* example-usb-serial/usb-cdc.c (cdc_main): Likewise. |
|
|
|
2018-09-26 NIIBE Yutaka <[email protected]> |
|
|
|
* chopstx.h (chopstx_intr_done): New function. |
|
* chopstx.c (chopstx_intr_done): New function. |
|
(chopstx_poll): Don't call chx_clr_intr. |
|
Ensure data memory barrier for interrupt handling. |
|
|
|
* chopstx-cortex-m.c (chx_dmb): New static function. |
|
* chopstx-gnu-linux.c (chx_dmb): Ditto. |
|
|
|
2018-09-21 NIIBE Yutaka <[email protected]> |
|
|
|
* mcu/stm32.h (struct GPIO, struct FLASH): Moved from... |
|
* mcu/clk_gpio_init-stm32.c: ... here. |
|
(AFIO_MAPR_SWJ_CFG_JTAGDISABLE): Move to ... |
|
* mcu/stm32f103.h: ... here. |
|
* mcu/sys-stm32f103.c: Don't include "mcu/cortex-m.h". |
|
|
|
* board/board-fst-01sz.h: New. |
|
* mcu/sys-stm32f103.h (BOARD_ID_FST_01SZ): New. |
|
* contrib/adc-stm32f103.c (get_adc_config): Add BOARD_ID_FST_01SZ. |
|
|
|
2018-08-20 NIIBE Yutaka <[email protected]> |
|
|
|
* mcu/usb-stm32f103.c (usb_lld_ctrl_send): Fix for ZLP. |
|
* mcu/usb-usbip.c (usb_lld_ctrl_send): Likewise. |
|
* mcu/usb-mkl27z.c (usb_lld_ctrl_send): Likewise. |
|
|
|
2018-05-09 NIIBE Yutaka <[email protected]> |
|
|
|
* VERSION: 1.9. |
|
* doc/chopstx.texi (VERSION): 1.9. |
|
|
|
2018-05-08 NIIBE Yutaka <[email protected]> |
|
|
|
* board/board-blue-pill.h (GPIO_USB_SET_TO_ENABLE): Remove. |
|
|
|
* doc/chopstx.texi (Compile-time macro): New chapter. |
|
|
|
* mcu/sys-stm32f103.c (usb_lld_sys_init): Use MHZ. |
|
(flash_protect): Fix for GD32F103. |
|
|
|
2018-04-26 NIIBE Yutaka <[email protected]> |
|
|
|
* board/board-blue-pill-g.h: New. Define STM32_ADCPRE and |
|
STM32_USBPRE for 96MHz clock. |
|
* mcu/stm32.h (STM32_USBPRE_DIV2): New for GD32F103. |
|
* mcu/clk_gpio_init-stm32.c: Allow constants, which are defined by |
|
board.h (STM32_ADCPRE and STM32_USBPRE). |
|
* mcu/chx-stm32f103.c: Use STM32_ADCPRE and STM32_USBPRE. |
|
|
|
* mcu/usb-stm32f103.c (usb_lld_init): BTABLE setting at |
|
initialization. |
|
(usb_lld_reset): Not at each reset. |
|
|
|
* contrib/adc-stm32f103.c [MCU_STM32F1_GD32F1]: Use continuous |
|
sampling with no DELIBARATELY_DO_IT_WRONG_START_STOP. |
|
(adc_init): Wait after ADC_CR2_ADON. |
|
(adc_start): Likewise. Enabling by ADC_CR2_ADON after all other |
|
registers configuration. |
|
|
|
2018-01-19 NIIBE Yutaka <[email protected]> |
|
|
|
* VERSION: 1.8. |
|
* doc/chopstx.texi (VERSION): 1.8. |
|
|
|
2018-01-18 NIIBE Yutaka <[email protected]> |
|
|
|
* mcu/stm32f103.h: Include stm32.h and cortex-m.h. |
|
|
|
2018-01-09 Anthony Romano <[email protected]> |
|
|
|
* contrib/adc-stm32f103.c: Support IN8 config. |
|
|
|
2017-12-19 NIIBE Yutaka <[email protected]> |
|
|
|
* VERSION: 1.7. |
|
* doc/chopstx.texi (VERSION): 1.7. |
|
|
|
2017-12-18 NIIBE Yutaka <[email protected]> |
|
|
|
* contrib/usart-stm32f103.c: New. |
|
* example-usb-serial: New example. |
|
|
|
2017-12-16 NIIBE Yutaka <[email protected]> |
|
|
|
* chopstx.c (chx_timer_expired): Bug fix of wake up. |
|
(chx_mutex_unlock): Avoid non-deterministic thing. |
|
|
|
2017-12-14 NIIBE Yutaka <[email protected]> |
|
|
|
* board/board-st-nucleo-f103.h: Update. |
|
|
|
* mcu/sys-stm32f103.h (BOARD_ID_FST_01G): New. |
|
|
|
* contrib/adc-stm32f103.c (get_adc_config): Add a case for |
|
BOARD_ID_FST_01G and BOARD_ID_ST_NUCLEO_F103. |
|
|
|
2017-11-24 NIIBE Yutaka <[email protected]> |
|
|
|
* VERSION: 1.6. |
|
* doc/chopstx.texi (VERSION): 1.6. |
|
* doc/chopstx-api.texi: Regenerated. |
|
|
|
2017-11-21 NIIBE Yutaka <[email protected]> |
|
|
|
* example-fsm-55: Update using stack-def.h. |
|
|
|
2017-11-20 NIIBE Yutaka <[email protected]> |
|
|
|
* example-led: Update using stack-def.h. |
|
|
|
* chopstx-cortex-m.c [__ARM_ARCH_6M__] (chx_sched): Fix. |
|
|
|
2017-11-18 NIIBE Yutaka <[email protected]> |
|
|
|
* example-fsm-55/hh.c (main): Just return. |
|
|
|
2017-11-17 NIIBE Yutaka <[email protected]> |
|
|
|
* mcu/chx-stm32f103.c (configure_clock): Change prescaler on |
|
sleep. |
|
|
|
* mcu/clk_gpio_init-stm32.c (clock_init): Don't turn on CRC |
|
module. |
|
|
|
* mcu/clk_gpio_init-stm32.c (STM32_*): Move to... |
|
* mcu/stm32.h (STM32_*): ... this header file. |
|
|
|
* mcu/stm32f103.h, mcu/clk_gpio_init-stm32.c (RCC): Move to... |
|
* mcu/stm32.h (RCC): ... this header file. |
|
|
|
* example-fsm-55: Update for new sleep API. |
|
|
|
* rules.mk (CSRC): Add mcu/chx-$(CHIP).c. |
|
|
|
* chopstx-cortex-m.c (idle, chx_sleep_mode): Remove. |
|
(chx_sched, preempt): Call chx_idle. |
|
* mcu/chx-mkl27z.c, mcu/chx-stm32f0.c, mcu/chx-stm32f103.c: New. |
|
* mcu/stm32.h: New. |
|
|
|
* chopstx-gnu-linux.c (chx_sleep_mode): Move to... |
|
* mcu/chx-gnu-linux.c: Here. |
|
|
|
* mcu/stm32f103.h (DBGMCU): New. |
|
|
|
* mcu/cortex-m.h: New. |
|
* mcu/sys-stm32f0.c, mcu/sys-stm32f103.c: Use mcu/cortex-m.h. |
|
|
|
* chopstx.c (chopstx_conf_idle): Call chx_sleep_mode before |
|
changing chx_allow_sleep. |
|
|
|
* board/board-blue-pill.h, board/board-cq-starm.h, |
|
board/board-fst-01-00.h, board/board-fst-01.h, |
|
board/board-fst-01g.h, board/board-maple-mini.h, |
|
board/board-nitrokey-start.h, board/board-olimex-stm32-h103.h, |
|
board/board-st-dongle.h, board/board-st-nucleo-f103.h, |
|
board/board-stbee-mini.h, board/board-stbee.h, |
|
board/board-stm32-primer2.h: Add MCU_STM32F1. |
|
|
|
2017-11-16 NIIBE Yutaka <[email protected]> |
|
|
|
* chopstx.h (chopstx_poll): API change. |
|
* chopstx.c (chopstx_poll): Use const pointer. |
|
|
|
* chopstx-cortex-m.c (idle): Support WFE. |
|
[!MCU_STM32F0] (chx_sleep_mode): Clock feed by HSI. |
|
|
|
2017-11-15 NIIBE Yutaka <[email protected]> |
|
|
|
* chopstx.c (chopstx_conf_idle): Call chx_sleep_mode. |
|
* chopstx-cortex-m.c (chx_sleep_mode): New. |
|
* chopstx-gnu-linux.c (chx_sleep_mode): New. |
|
|
|
2017-11-15 NIIBE Yutaka <[email protected]> |
|
|
|
* example-fsm-55/hh.c (main): Add call to chopstx_conf_idle. |
|
* example-fsm-55/Makefile (DEFS): Remove USE_WFI_FOR_IDLE. |
|
|
|
* chopstx.c (chx_init): Initialize sleep lock. |
|
(chopstx_conf_idle): New. |
|
* chopstx-cortex-m.c (idle): Support sleep. |
|
|
|
* mcu/usb-stm32f103.c (usb_lld_event_handler): Fix suspend/resume. |
|
|
|
2017-11-14 NIIBE Yutaka <[email protected]> |
|
|
|
* usb_lld.h (DEVICE_STATE): Add prefix USB_DEVICE_STATE_. |
|
(USB_DEVICE_STATE_DEFAULT): New. |
|
|
|
* mcu/usb-stm32f103.c (usb_lld_init): Suspend/resume init. |
|
(usb_lld_event_handler): Add suspend/resume support. |
|
|
|
* example-cdc/usb-cdc.c: Follow the change of usb_lld.h. |
|
* example-cdc-gnu-linux/usb-cdc.c: Ditto. |
|
* example-fs-bb48/usb-cdc.c: Ditto. |
|
* example-fraucheky/main.c: Ditto. |
|
* example-fraucheky/Makefile (USE_SYS): Add for debug. |
|
|
|
2017-11-13 NIIBE Yutaka <[email protected]> |
|
|
|
* mcu/usb-stm32f103.c (usb_lld_init): Set up interrupt on errors. |
|
|
|
* usb_lld.h (USB_EVENT_DEVICE_WAKEUP): New. |
|
(INTR_REQ_USB): Define here. |
|
* mcu/usb-usbip.c, example-cdc/usb-cdc.c, |
|
example-fraucheky/main.c, example-fs-bb48/usb-cdc.c: Change |
|
for INTR_REQ_USB. |
|
|
|
2017-11-10 NIIBE Yutaka <[email protected]> |
|
|
|
* chopstx-cortex-m.c (svc): Replace stack top to TP. |
|
(chx_sched): Return ->v correctly. |
|
|
|
* chopstx.c (chx_timer_expired): Fix timeout. |
|
|
|
2017-10-11 NIIBE Yutaka <[email protected]> |
|
|
|
* mcu/sys-stm32f103.h (nonreturn_handler0, nonreturn_handler1): New. |
|
|
|
2017-10-10 NIIBE Yutaka <[email protected]> |
|
|
|
* mcu/usb-usbip.c (usbip_run_server): Shutdown support. |
|
(usb_lld_shutdown): Shutdown glace-fully. |
|
|
|
2017-10-10 NIIBE Yutaka <[email protected]> |
|
|
|
* VERSION: 1.5. |
|
* doc/chopstx.texi (VERSION): 1.5. |
|
* doc/chopstx-api.texi: Regenerated. |
|
|
|
2017-10-09 NIIBE Yutaka <[email protected]> |
|
|
|
* example-cdc-gnu-linux/sample.c (main): Support debug option. |
|
|
|
* mcu/sys-gnu-linux.h (debug): New. |
|
* mcu/sys-gnu-linux.c: Use debug. |
|
* mcu/usb-usbip.c: Use debug. |
|
|
|
* example-cdc/sample.ld (.process_stack, .main_stack): Add NOLOAD. |
|
|
|
2017-09-29 NIIBE Yutaka <[email protected]> |
|
|
|
* mcu/sys-stm32f103.c (flash_program_halfword, flash_erase_page) |
|
(flash_write, flash_erase_all_and_exec): Use uintptr_t. |
|
|
|
2017-09-08 NIIBE Yutaka <[email protected]> |
|
|
|
* mcu/sys-gnu-linux.c: Flash emulation implemented. |
|
|
|
2017-09-05 NIIBE Yutaka <[email protected]> |
|
|
|
* example-cdc: Use stack-def.h. |
|
* example-cdc/stack-def.h: New. |
|
|
|
2017-09-04 NIIBE Yutaka <[email protected]> |
|
|
|
* mcu/sys-stm32f103.h (nvic_system_reset): Add noreturn attribute. |
|
|
|
* sys.h: Add mcu/sys-gnu-linux.h. |
|
|
|
* mcu/sys-gnu-linux.c: New. |
|
* mcu/sys-gnu-linux.h: New. |
|
|
|
2017-08-11 NIIBE Yutaka <[email protected]> |
|
|
|
* VERSION: 1.4. |
|
* doc/chopstx.texi (VERSION): 1.4. |
|
|
|
2017-08-03 Jeremy Drake <[email protected]> |
|
|
|
* mcu/sys-stm32f103.c (flash_write): Allow compile time |
|
flash size definition by STM32F103_OVERRIDE_FLASH_SIZE_KB. |
|
|
|
2017-08-02 NIIBE Yutaka <[email protected]> |
|
|
|
* contrib/adc-gnu-linux.c: New. |
|
|
|
2017-07-07 NIIBE Yutaka <[email protected]> |
|
|
|
* mcu/usb-usbip.c (usbip_handle_data_urb): Fix error return value. |
|
(notify_hostcontroller): New. |
|
(usb_lld_stall_tx, usb_lld_stall_rx): Notify host controller side. |
|
|
|
2017-07-06 NIIBE Yutaka <[email protected]> |
|
|
|
* mcu/usb-usbip.c (hc_handle_data_urb): Fix the condition of the |
|
end of transaction. |
|
(read_data_transaction): Allow partial read by host. |
|
|
|
2017-07-05 NIIBE Yutaka <[email protected]> |
|
|
|
* example-fraucheky: New. |
|
|
|
2017-06-28 NIIBE Yutaka <[email protected]> |
|
|
|
* mcu/usb-usbip.c (struct usbip_msg_cmd, struct usbip_msg_rep): |
|
Use different struct for command and reply. |
|
|
|
2017-06-27 NIIBE Yutaka <[email protected]> |
|
|
|
* example-cdc-gnu-linux/README: New. |
|
|
|
2017-06-26 NIIBE Yutaka <[email protected]> |
|
|
|
* board/board-gnu-linux.h: New. |
|
|
|
* mcu/usb-usbip.c: New. |
|
|
|
* rules.mk: Support EMULATION. |
|
|
|
* entry.c (main): Support GNU_LINUX_EMULATION. |
|
|
|
2017-06-23 NIIBE Yutaka <[email protected]> |
|
|
|
* chopstx-gnu-linux.c, chopstx-gnu-linux.h: New. |
|
|
|
* chopstx.c (chx_init): Use chx_init_arch. |
|
(chopstx_create): Use chopstx_create_arch. |
|
(chx_systick_reset, chx_systick_reload, chx_systick_get) |
|
(usec_to_ticks, chx_enable_intr, chx_clr_intr, chx_disable_intr) |
|
(chx_set_intr_prio, chx_prio_init, chx_cpu_sched_lock) |
|
(chx_cpu_sched_unlock, idle, chx_handle_intr) |
|
(chx_request_preemption, chx_sched, preempt, svc): Move to... |
|
* chopstx-cortex-m.c: ... here. |
|
(chx_init_arch, chopstx_create_arch): New. |
|
* chopstx-cortex-m.h: New for tcontext_t. |
|
|
|
2017-06-22 NIIBE Yutaka <[email protected]> |
|
|
|
* chopstx.c (chx_sched): Use ->V for return value. |
|
(svc): Ditto. |
|
(chx_wakeup): Set -> for the return value of chx_sched. |
|
(chopstx_mutex_lock, chopstx_cancel): Likewise. |
|
(chopstx_exit): Remove naked attribute. |
|
|
|
2017-06-21 NIIBE Yutaka <[email protected]> |
|
|
|
* chopstx.c (struct chx_pq): Use uintptr_t for V. |
|
(struct chx_px): Likewise. |
|
(struct chx_thread): Likewise. |
|
(chx_sched): Use uintptr_t for the return value. |
|
(chx_exit): Use the field V for holding exit value. |
|
(chopstx_create): Use uintptr_t for STACK_ADDR. |
|
(chopstx_join): Use the field V for exit value. |
|
|
|
2017-06-16 NIIBE Yutaka <[email protected]> |
|
|
|
* chopstx.c (chx_wakeup): Fix for RUNNING==NULL. |
|
|
|
* mcu/usb-mkl27z.c (std_get_status): Use staic var, not auto. |
|
|
|
2017-05-18 NIIBE Yutaka <[email protected]> |
|
|
|
* chopstx.c (chx_wakeup): Fix access to REG_R0. |
|
|
|
2017-02-02 NIIBE Yutaka <[email protected]> |
|
|
|
* VERSION: 1.3. |
|
* doc/chopstx.texi (VERSION): 1.3. |
|
|
|
2017-02-01 Paul Fertser <[email protected]> |
|
|
|
* board/board-blue-pill.h: New. |
|
|
|
2016-12-08 Szczepan Zalega <[email protected]> |
|
|
|
* board/board-nitrokey-start.h (VAL_GPIO_USB_ODR): Switch off red |
|
LED for Nitrokey Start. |
|
|
|
2016-10-13 NIIBE Yutaka <[email protected]> |
|
|
|
* VERSION: 1.2. |
|
* doc/chopstx.texi (VERSION): 1.2. |
|
|
|
2016-10-12 NIIBE Yutaka <[email protected]> |
|
|
|
* chopstx.c (chopstx_join, chopstx_cancel): chopstx_join is |
|
cancellation point. |
|
|
|
2016-07-11 NIIBE Yutaka <[email protected]> |
|
|
|
* mcu/stm32f103.h: Add more from Gnuk 1.1.9. |
|
* example-cdc, example-fs-bb48, example-fsm-55, example-led: |
|
Update for stack addr/size. |
|
|
|
2016-07-01 NIIBE Yutaka <[email protected]> |
|
|
|
* VERSION: 1.1. |
|
* doc/chopstx.texi (VERSION): 1.1. |
|
|
|
* chopstx.c (chopstx_setpriority): Change the API. |
|
|
|
2016-06-30 NIIBE Yutaka <[email protected]> |
|
|
|
* example-cdc/usb-cdc.c (tty_recv, tty_main): Follow the change of |
|
chopstx_poll. |
|
|
|
2016-06-29 NIIBE Yutaka <[email protected]> |
|
|
|
* example-fs-bb48: Update. |
|
* example-fs-bb48/touch.c: New. |
|
|
|
* chopstx.c (chopstx_setpriority): Fix sched_lock/unlock. |
|
|
|
2016-06-28 NIIBE Yutaka <[email protected]> |
|
|
|
* chopstx.h (struct chx_poll_head): Declare here. |
|
|
|
* chopstx.c (chopstx_poll): Don't use varargs, but use |
|
an array of pointer. |
|
(chopstx_intr_wait): Follow the change of chopstx_poll. |
|
* eventflag.c (eventflag_wait_timeout): Likewise. |
|
* contrib/adc-stm32f103.c (adc_wait_completion): Likewise. |
|
* contrib/adc-mkl27z.c (adc_wait_completion): Likewise. |
|
|
|
2016-06-16 Niibe Yutaka <[email protected]> |
|
|
|
* VERSION: 1.0. |
|
* doc/chopstx.texi (VERSION): 1.0. |
|
|
|
* board/board-fst-01g.h: New. |
|
|
|
2016-06-15 Niibe Yutaka <[email protected]> |
|
|
|
* chopstx.c (chopstx_exit): Add "naked" attribute. |
|
|
|
2016-06-14 Niibe Yutaka <[email protected]> |
|
|
|
* mcu/usb-stm32f103.c (usb_lld_ctrl_recv): Fix the state and make |
|
the endpoint 0 RX_VALID. |
|
|
|
2016-06-10 NIIBE Yutaka <[email protected]> |
|
|
|
* usb_lld.h (USB_EVENT_OK): Rename. |
|
* mcu/usb-stm32f103.c: Update. |
|
* mcu/usb-mkl27z.c: Likewise. |
|
|
|
* example-cdc/usb-cdc.c: Follow the change of API. |
|
* example-fs-bb48/usb-cdc.c: Likewise. |
|
|
|
2016-06-09 NIIBE Yutaka <[email protected]> |
|
|
|
* mcu/usb-stm32f103.c (usb_lld_ctrl_recv): Rename. |
|
(usb_lld_ctrl_send): Rename. |
|
(usb_lld_ctrl_ack): Rename and let have return value. |
|
* mcu/usb-mkl27z.c: Likewise. |
|
|
|
* example-cdc/usb-cdc.c: Follow the change of API. |
|
* example-fs-bb48/usb-cdc.c: Likewise. |
|
|
|
2016-06-08 NIIBE Yutaka <[email protected]> |
|
|
|
* mcu/usb-stm32f103.c: Rewrite to be event driven API. |
|
* mcu/usb-mkl27z.c: Likewise. |
|
|
|
* example-cdc/usb-cdc.c: Update to new USB API. |
|
* example-fs-bb48/usb-cdc.c: Likewise. |
|
|
|
* example-cdc/tty.h: Change tty API to be C string (char*) |
|
friendly. |
|
* example-fs-bb48/tty.h: Ditto. |
|
|
|
2016-06-02 Niibe Yutaka <[email protected]> |
|
|
|
* contrib/adc-mkl27z.c: Move from mcu. |
|
* contrib/adc-stm32f103.c: Move from mcu. |
|
|
|
* example-led/Makefile (CHIP): Define as stm32f0. |
|
|
|
* mcu/sys-stm32f0.h: Rename from sys-stm32f030.h, |
|
as we share it among STM32F030 and STM32F050. |
|
* mcu/sys-stm32f0.c: Likewise. |
|
|
|
* board/board-stm32f0-discovery.h (MCU_STM32F0): Define. |
|
|
|
* sys.h: Support STM32F0. |
|
|
|
2016-06-01 NIIBE Yutaka <[email protected]> |
|
|
|
* chopstx.h (chx_fatal): Remove weak attribute from declaration. |
|
* chopstx.c (chx_fatal): Add weak attribute to implementation. |
|
|
|
2016-05-31 NIIBE Yutaka <[email protected]> |
|
|
|
* VERSION: 0.12. |
|
* doc/chopstx.texi (VERSION): 0.12. |
|
|
|
* sys.h: New. |
|
|
|
* example-cdc, example-fs-bb48: Update. |
|
* example-fsm-55, example-led: Update. |
|
|
|
2016-05-30 NIIBE Yutaka <[email protected]> |
|
|
|
* mcu/usb-stm32f103.c (usb_lld_setup_endpoint): Start with |
|
EP_RX_NAK. |
|
|
|
* mcu/usb-mkl27z.c (handle_transaction): Handle NAK case. |
|
(usb_lld_setup_endp): Rename from usb_lld_setup_endpoint. |
|
(usb_lld_rx_enable_buf): Rename from usb_lld_rx_enable. |
|
(usb_lld_tx_enable_buf): Rename from usb_lld_tx_enable. |
|
|
|
* mcu/adc-stm32f103.c: New from NeuG. |
|
* mcu/stm32f103.h: New from NeuG. |
|
|
|
* example-cdc: Update. |
|
|
|
2016-05-30 NIIBE Yutaka <[email protected]> |
|
|
|
* mcu/adc-mkl27z.c, mcu/sys-mkl27z.c, mcu/usb-mkl27z.c: Moved from |
|
example-fs-bb48. |
|
|
|
* mcu/adc-stm32f103.c, mcu/sys-stm32f103.c, mcu/usb-stm32f103.c: |
|
Moved from example-cdc. |
|
|
|
2016-05-30 NIIBE Yutaka <[email protected]> |
|
|
|
* example-fs-bb48/sys.c (flash_do_internal, flash_do) |
|
(flash_erase_page, flash_program_word): New. |
|
* example-fs-bb48/command.c (cmd_fes, cmd_fww): New. |
|
|
|
2016-05-27 NIIBE Yutaka <[email protected]> |
|
|
|
* example-fs-bb48/command.c (cmd_sysinfo): New. |
|
* example-fs-bb48/sample.ld: Update. |
|
* example-fs-bb48/sys.h: New. |
|
Move crc32 functions declarations here. |
|
* example-fs-bb48/sys.c: Rename from first-pages.c. |
|
Include mcu/clk_gpio_init-kl.c to define clock_init and |
|
gpio_init. |
|
(set_led): New. |
|
(reset): Initialize MSP. |
|
(flash_config): Include comparison key. |
|
(crc32_init, crc32_u8, crc32_u32): Change the API. |
|
Write them in assembler so that the size of functions |
|
keep unchanged. |
|
(sys_version, sys_board_id, sys_board_name, sys_vector): New. |
|
|
|
2016-05-26 NIIBE Yutaka <[email protected]> |
|
|
|
* entry.c: Follow the move of clk_gpio_init*.c |
|
* example-cdc/sys.c: Likewise. |
|
* example-led/sys.c: Likewise. Update to 3.0. |
|
* example-primer2/sys.c: Update. |
|
|
|
* mcu/clk_gpio_init-stm32.c: Moved. |
|
* mcu/clk_gpio_init-kl.c: Moved. |
|
* mcu/kl_sim.h: New (was in example-fs-bb48). |
|
|
|
* example-fs-bb48/adc_kl27z.c: Use DMA0 and DMA1. |
|
* example-fs-bb48/adc_kl27z.c (adc_wait_completion): Use only |
|
least significant 8-bit (most significant for randomness). |
|
* example-fs-bb48/command.c (cmd_adc): Rename from |
|
cmd_temperature. |
|
|
|
2016-05-24 NIIBE Yutaka <[email protected]> |
|
|
|
* example-fs-bb48/command.c: New. |
|
* example-fs-bb48: Update example CDC device. |
|
|
|
2016-05-23 NIIBE Yutaka <[email protected]> |
|
|
|
* chopst.x (chx_sched) [__ARM_ARCH_6M__]: Maintain PSR. |
|
|
|
2016-05-23 NIIBE Yutaka <[email protected]> |
|
|
|
* chopstx.c (chopstx_poll): Fix a race. Check COUNTER. |
|
|
|
* example-cdc/usb-cdc.c (tty_input_char): Include newline. |
|
* example-cdc/sample.c: Handle newline. |
|
|
|
* example-fs-bb48/usb-cdc.c: Update from example-cdc. |
|
* example-fs-bb48/tty.h: Likewise. |
|
* example-fs-bb48/sample.c: Follow the change. |
|
|
|
2016-05-20 NIIBE Yutaka <[email protected]> |
|
|
|
* chopstx.c (chopstx_usec_wait_var): internal function. |
|
(chopstx_wakeup_usec_wait): Remove. |
|
|
|
2016-05-19 NIIBE Yutaka <[email protected]> |
|
|
|
* VERSION: 0.11. |
|
* doc/chopstx.texi (VERSION): 0.11. |
|
|
|
2016-05-18 NIIBE Yutaka <[email protected]> |
|
|
|
* eventflag.c: Update using chopstx_poll and offer API for poll. |
|
|
|
* chopstx.c (requeue): New. |
|
(chopstx_mutex_lock, chopstx_join): Fix by requeue. |
|
(chopstx_main_init): Remove. |
|
(chopstx_setpriority): New. |
|
|
|
* example-cdc/usb-cdc.c: Prepare for multiple TTYs. |
|
|
|
2016-05-17 NIIBE Yutaka <[email protected]> |
|
|
|
* example-cdc/usb-cdc.c: Update as TTY input/output with line |
|
editing support. |
|
* example-cdc/sample.c: Likewise. |
|
* example-cdc/tty.h: Rename from stream.h. |
|
|
|
* chopstx.c (chopstx_poll): Set ->ready = 0. |
|
Add spinlock for ll_dequeue. |
|
|
|
2016-05-16 NIIBE Yutaka <[email protected]> |
|
|
|
* example-cdc/sys.c (nvic_enable_vector): Remove. |
|
(usb_lld_sys_init): Don't setup NVIC priority. |
|
(sys_version): sys version 3.0. |
|
|
|
2016-05-16 NIIBE Yutaka <[email protected]> |
|
|
|
* chopstx.h (CHOPSTX_EXIT_SUCCESS, CHOPSTX_EXIT_CANCELED) |
|
(CHOPSTX_EXIT_CANCELED_IN_SYNC): Remove. |
|
(CHOPSTX_CANCELED): New. |
|
|
|
* chopstx.c (chopstx_testcancel): Use CHOPSTX_CANCELED. |
|
(chx_sched, chx_snooze): Re-define return values cleanly. |
|
(chopstx_cancel): Use return value of chx_sched to cancel. |
|
(chopstx_cond_wait, chopstx_join, chopstx_poll): Implement |
|
cancellation rather easier way with return value of chx_sched. |
|
|
|
2016-05-15 NIIBE Yutaka <[email protected]> |
|
|
|
* chopstx.c (chopstx_claim_irq): Don't register clean up function. |
|
(chx_release_irq): Remove. |
|
(chopstx_cancel): Disable IRQ when canceled at POLL. |
|
(chopstx_poll): Fix IRQ handling. |
|
|
|
2016-05-13 NIIBE Yutaka <[email protected]> |
|
|
|
* chopstx.c (chx_handle_intr): Call chx_request_preemption. |
|
(chx_wakeup, chopstx_cond_signal, chopstx_cond_broadcast) |
|
(chx_intr_hook, chopstx_poll): Cleanup. |
|
|
|
2016-05-13 NIIBE Yutaka <[email protected]> |
|
|
|
* chopstx.c (chopstx_exit): Don't call chx_release_irq_thread. |
|
(chx_release_irq_thread): Remove. |
|
(q_intr): New variable. |
|
(intr_top): Remove. |
|
(chx_handle_intr, chx_init, chopstx_claim_irq) |
|
(chopstx_intr_wait): Use Q_INTR. |
|
(chx_intr_hook): New. |
|
(chopstx_poll): Support CHOPSTX_POLL_INTR. |
|
(chopstx_release_irq): Remove. |
|
(chx_release_irq): New internal function. |
|
(THREAD_WAIT_INT): Remove. |
|
(chopstx_intr_wait): Rewrite by chopstx_poll. |
|
|
|
2016-05-13 NIIBE Yutaka <[email protected]> |
|
|
|
* chopstx.c (chx_sched) [__ARM_ARCH_6M__]: Fix asm. |
|
(chx_handle_intr, chx_wakeup, chopstx_cancel): Fix for polling |
|
with no timeout. |
|
|
|
* example-cdc/sample.c (main): Update chopstx_poll example. |
|
* example-fs-bb48/sample.c (main): Ditto. |
|
|
|
* chopstx.c (struct chx_px): Add READY_P and LOCK. |
|
(chx_proxy_init): Add initialization of new members. |
|
(chx_wakeup): Spinlock PX. |
|
(chopstx_mutex_lock): Add protection by splinlock. |
|
(chx_cond_hook, chx_join_hook): Change arguments. |
|
(chx_cond_unhook, chx_join_unhook): Remove. |
|
(chopstx_claim_irq): Compatible to chx_poll. |
|
(chopstx_join): Fix spinlocking. |
|
(chopstx_cancel): Fix spinlocking. |
|
|
|
2016-05-12 NIIBE Yutaka <[email protected]> |
|
|
|
* example-cdc/sample.c: Update using chopstx_poll. |
|
* example-cdc/sample.ld: Likewise. |
|
* example-cdc/stream.h: Likewise. |
|
* example-cdc/usb-cdc.c: Likewise. |
|
|
|
* chopstx.c (chopstx_mutex_init): Initialize OWNER, too. |
|
(preempt) [__ARM_ARCH_7M__]: Bug fix for register 0 to inhibit |
|
scheduling. |
|
(chx_sched) [__ARM_ARCH_6M__]: Return YIELD normally. |
|
(MAX_USEC_FOR_TIMER): Guarantee 24-bit tick. |
|
(chx_snooze): Revert the change of 2016-04-24 and modify |
|
chopstx_poll instead. |
|
(chopstx_poll): Support waiting forever. |
|
|
|
2016-04-24 Niibe Yutaka <[email protected]> |
|
|
|
* chopstx.c (chx_snooze): Wait forever when it's POLL and usec==0. |
|
|
|
2016-04-22 Niibe Yutaka <[email protected]> |
|
|
|
* example-fs-bb48/first-pages.c: Rename from reset.c and merge |
|
crc32.c. |
|
* example-fs-bb48/sample.ld: Define section for first two pages. |
|
* example-fs-bb48/usb_kl27z.c (__usb_buf__): Remove. |
|
|
|
* chopstx.c (chx_cond_hook): Rename from chopstx_cond_hook and make |
|
it internal. |
|
(chx_cond_unhook): Likewise. |
|
(chx_join_hook, chx_join_unhook): New. |
|
(chopstx_poll): Change API, not exposing internals of hook/unhook. |
|
|
|
* example-fs-bb48/sample.c (main): Follow the API change of |
|
chopstx_poll. |
|
|
|
2016-04-21 Niibe Yutaka <[email protected]> |
|
|
|
* chopstx.c (chx_snooze, chx_wakeup): New. |
|
(chopstx_cond_hook, chopstx_cond_unhook): New. |
|
(chopstx_cond_signal, chopstx_cond_broadcast): Fix for poll. |
|
(chx_proxy_init): Initialize with RUNNING. |
|
(chopstx_poll): Fix with chx_snooze. |
|
(chx_exit): Use chx_wakeup. |
|
|
|
* example-fs-bb48/sample.c (main): Update with chopstx_poll. |
|
* example-fs-bb48/usb-cdc.c (stream_recv): Fix the loop clear |
|
FLAG_RECV_AVAIL only after we process it. |
|
|
|
2016-04-20 Niibe Yutaka <[email protected]> |
|
|
|
* example-cdc/usb_stm32f103.c (usb_lld_reset): Supply FEATURE |
|
argument. Call usb_lld_set_configuration internally and set |
|
FEATURE. |
|
(usb_lld_set_feature): Remove. |
|
* example-cdc/usb-cdc.c (usb_cb_device_reset): Update with new |
|
API. |
|
|
|
* example-cdc/sys.c: Include clk_gpio_init-stm32.c. |
|
* example-led/sys.c, example-primer2/sys.c: Ditto. |
|
|
|
2016-04-19 Niibe Yutaka <[email protected]> |
|
|
|
* example-fs-bb48/sample.c (main): Change the example to display |
|
CRC32 value from input line. |
|
|
|
2016-04-18 Niibe Yutaka <[email protected]> |
|
|
|
* example-fs-bb48: New directory for FS-BB48. |
|
|
|
* clk_gpio_init-kl.c: New. |
|
* clk_gpio_init-stm32.c: Rename from clk_gpio_init.c. |
|
|
|
2016-04-07 Niibe Yutaka <[email protected]> |
|
|
|
* example-fsm-55/sys.c: Update for non-SVC Chopstx. |
|
|
|
2016-04-07 Niibe Yutaka <[email protected]> |
|
|
|
* example-cdc/usb-cdc.c: Update. |
|
|
|
* example-cdc/usb_stm32f103.c (usb_handle_transfer): Don't use |
|
weak symbols for callbacks, but use explicit callbacks of |
|
usb_cb_tx_done and usb_cb_rx_ready. |
|
|
|
* example-cdc/usb_lld.h (usb_cb_tx_done, usb_cb_rx_ready): New |
|
callbacks. |
|
|
|
2016-04-07 Niibe Yutaka <[email protected]> |
|
|
|
* chopstx.c (chx_cpu_sched_lock, chx_cpu_sched_unlock): Use SVC |
|
for Cortex-M3, because of ICI/IT of ESPR. |
|
(chx_sched): Invoke svc for Cortex-M3. |
|
(preempt, svc): Change back for Cortex-M3. |
|
|
|
2016-04-07 Niibe Yutaka <[email protected]> |
|
|
|
* entry.c (vector_table): Since IDLE thread runs with PSP now, use |
|
different value for MSP. |
|
|
|
* chopstx.c (chx_sched): Push LR value to PC slot on stack, so |
|
that it returns directly to caller. |
|
|
|
2016-04-06 Niibe Yutaka <[email protected]> |
|
|
|
* chopstx.c (struct chx_pq): New struct for priority queue. |
|
(struct chx_px): New struct for proxy. |
|
(struct chx_thread): New member FLAG_IS_PROXY. |
|
(ll_dequeue, ll_insert, ll_pop, ll_prio_push, ll_prio_enqueue) |
|
Change API. |
|
(THREAD_WAIT_POLL): New thread status. |
|
(chx_ready_pop, chx_ready_push, chx_ready_enqueue): Type coercion. |
|
(chx_timer_insert, chx_timer_dequeue, chx_timer_expired): Use |
|
chx_pq. |
|
(chx_handle_intr, chopstx_cancel): Handle THREAD_WAIT_POLL. |
|
(chx_init): Type coercion. |
|
(chx_exit): Handle proxy for join. |
|
(chopstx_create): Initialize the member FLAG_IS_PROXY. |
|
(chopstx_cond_signal) Handle proxy. |
|
(chx_proxy_init, chopstx_poll): New. |
|
|
|
2016-04-06 Niibe Yutaka <[email protected]> |
|
|
|
* chopstx.h (struct chx_qh): New struct. |
|
|
|
* chopstx.c (struct chx_queue): Use chx_qh. |
|
(struct chx_thread): New member PARENT. |
|
(ll_empty): Use chx_qh. |
|
(ll_prio_push, ll_prio_enqueue): Set the member PARENT. |
|
(chx_ready_pop, chx_ready_push, chx_ready_enqueue): Use the |
|
member Q. |
|
(chx_timer_insert): Return TP. |
|
(chx_timer_dequeue, chx_timer_expired): Use the member Q. |
|
(chx_init): Initialize change for Q_READY, Q_TIMER, Q_JOIN. |
|
(chx_sched, preempt): Handle return value of chx_timer_insert. |
|
(chx_exit, chopstx_mutex_init, chopstx_cond_init): Use the member Q. |
|
(chx_mutex_unlock): Type coercion to CHX_THREAD. |
|
(chopstx_create): Initialize PARENT field. |
|
(chopstx_mutex_lock): Use the PARENT field. |
|
(chopstx_join): Use ll_prio_enqueue, instead of ll_insert. |
|
(chopstx_wakeup_usec_wait): Set REG_R0 on the stack. |
|
|
|
2016-04-06 Niibe Yutaka <[email protected]> |
|
|
|
* chopstx.c (struct chx_thread): Move tcontext field. |
|
(chx_cpu_sched_lock, chx_cpu_sched_unlock): Use CPSID/CPSIE. |
|
(chx_sched): Don't use SVC. Return integer value. |
|
(chopstx_usec_wait_var): Don't use R8. |
|
(preempt): Modify so that we don't use SVC. |
|
|
|
2016-04-05 Niibe Yutaka <[email protected]> |
|
|
|
* chopstx.c (struct NVIC): Add volatile qualifier to members. |
|
(chx_spin_init): New. |
|
(chopstx_mutex_init, chopstx_cond_init): Call chx_spin_init. |
|
(chx_init): Initialize the spinlocks for INTR_LOCK, Q_READY, |
|
Q_TIMER, and Q_JOIN. |
|
|
|
2016-03-08 Niibe Yutaka <[email protected]> |
|
|
|
* chopstx.h (CHOPSTX_THREAD_SIZE): Align by 8. |
|
* chopstx.c (struct chx_thread): Add W field to align. This is to |
|
comply AAPCS (ARM Architecture Procedure Call Standard). |
|
(chx_init): Initialize W. |
|
|
|
* example-cdc/usb_stm32f103.c, usb_lld.h: Update from Gnuk. |
|
* example-cdc/usb-cdc.c: Update. |
|
|
|
2015-11-05 Niibe Yutaka <[email protected]> |
|
|
|
* example-cdc/sample.c: Enhanced to be echo service. |
|
|
|
2015-09-15 Niibe Yutaka <[email protected]> |
|
|
|
* VERSION: 0.10. |
|
* doc/chopstx.texi (VERSION): 0.10. |
|
|
|
* example-cdc/usb_stm32f103.c: Update from Gnuk. |
|
|
|
2015-09-14 Niibe Yutaka <[email protected]> |
|
|
|
* chopstx.c (q_exit): Remove. |
|
(chx_init, chx_exit): Remove access to Q_EXIT. |
|
(chx_release_irq_thread): Fix removing from the list. |
|
|
|
2015-09-11 Niibe Yutaka <[email protected]> |
|
|
|
* chopstx.c (chx_init, chopstx_create): Fix the initial value |
|
of flag_cancelable. |
|
|
|
2015-09-10 Niibe Yutaka <[email protected]> |
|
|
|
* VERSION: 0.09. |
|
* doc/chopstx.texi (VERSION): 0.09. |
|
|
|
* chopstx.c (chx_release_irq_thread): Rename. |
|
|
|
2015-09-09 Niibe Yutaka <[email protected]> |
|
|
|
* example-cdc/usb-cdc.c (usb_cb_ctrl_write_finish): Distinguish |
|
DTR signal. |
|
(usb_cb_device_reset): Fix USB reset handling. |
|
|
|
* chopstx.c (chopstx_usec_wait_var, chopstx_cond_wait) |
|
(chopstx_intr_wait): Call chopstx_testcancel. |
|
(chopstx_setcancelstate): New. |
|
|
|
* chopstx.c (chx_systick_reset, chx_systick_reload) |
|
(chx_systick_get): Factor out systick functions. |
|
(chx_prio_init): Factor out. |
|
|
|
2015-09-08 Niibe Yutaka <[email protected]> |
|
|
|
* chopstx.c (chx_request_preemption): Add PRIO argument and check |
|
the condition inside. |
|
(chx_timer_expired, chx_handle_intr): Call unconditionally. |
|
(intr_lock): New variable. |
|
(chx_handle_intr, chopstx_claim_irq, chopstx_release_irq) |
|
(chopstx_release_irq_thread): Add spin lock with intr_lock. |
|
|
|
* chopstx.h (chx_intr): Remove member LOCK. |
|
|
|
2015-09-07 Niibe Yutaka <[email protected]> |
|
|
|
* example-primer2: New from Kazumoto Kojima. |
|
|
|
* board/board-nitrokey-start.h (VAL_GPIO_USB_ODR) |
|
(VAL_GPIO_USB_CRL): Fix the values for NeuG settings. |
|
|
|
2015-09-04 Niibe Yutaka <[email protected]> |
|
|
|
* example-cdc/sys.h (BOARD_ID_NITROKEY_START): New. |
|
* board/board-nitrokey-start.h (BOARD_ID): Fix the value. |
|
* clk_gpio_init.c (AFIO_MAPR_SWJ_CFG_JTAGDISABLE): New. |
|
|
|
2015-08-07 Mateusz Zalega <[email protected]> |
|
|
|
* board/board-nitrokey-start.h: New. |
|
|
|
2015-08-06 Niibe Yutaka <[email protected]> |
|
|
|
* example-fsm-55/README: Updated. |
|
|
|
2015-07-31 Niibe Yutaka <[email protected]> |
|
|
|
* VERSION: 0.08. |
|
* doc/chopstx.texi (VERSION): 0.08. |
|
|
|
* example-fsm-55/Makefile (DEFS): Remove HAVE_SYS_H. |
|
Add MAKE_ENTRY_PUBLIC. |
|
* example-fsm-55/hacker-emblem.ld: Put vectors on ROM. |
|
* example-fsm-55/sys.c: No system services. |
|
* entry.c (entry): Can be public. |
|
* clk_gpio_init.c (clock_init) [MCU_STM32F0]: Don't change CFGR1. |
|
|
|
2015-07-30 Niibe Yutaka <[email protected]> |
|
|
|
* board/board-st-nucleo-f103.h: New. Contributed by Kenji |
|
Rikitake. |
|
|
|
2015-07-29 Niibe Yutaka <[email protected]> |
|
|
|
* board/board-st-dongle.h: New. Contributed by Kenji Rikitake. |
|
|
|
* board/board-*.h (FLASH_PAGE_SIZE): Remove. |
|
|
|
2015-07-28 Niibe Yutaka <[email protected]> |
|
|
|
* example-cdc/usb_stm32f103.c: Update from Gnuk. |
|
* example-cdc/usb_lld.h: Ditto. |
|
* example-cdc/usb-cdc.c: Follow the change. |
|
|
|
2015-07-15 Niibe Yutaka <[email protected]> |
|
|
|
* VERSION: 0.07. |
|
* doc/chopstx.texi (VERSION): 0.07. |
|
|
|
2015-07-14 Niibe Yutaka <[email protected]> |
|
|
|
* board/board-*.h (BOARD_ID): New. |
|
* example-cdc/sys.c (sys_board_id): New. |
|
* example-cdc/sample.ld (.sys.board_id): New. |
|
(__flash_start__, __flash_end__): Remove. |
|
* entry.c (vector_table) [HAVE_SYS_H]: By undefining STM32F10X_MD, |
|
prepare for high density device even compiled for MD device. |
|
|
|
2015-07-13 Kaz Kojima <[email protected]> |
|
|
|
* board/board-stm32-primer2.h: Update. |
|
* entry.c (vector_table): Less or more. |
|
|
|
2015-07-13 Niibe Yutaka <[email protected]> |
|
|
|
* board/board-*.h (BOARD_NAME): New. |
|
(STM32F10X_MD): Define for medium-density devices. |
|
* example-led/sys.c, sample.ld: Update. |
|
* example-fsm-55/sys.c, hacker-emblem.ld: Update. |
|
* example-cdc/sys.c (sys_board_name): New. |
|
* example-cdc/sample.ld: Update. |
|
|
|
2015-07-08 Niibe Yutaka <[email protected]> |
|
|
|
* VERSION: 0.06. |
|
* doc/chopstx.texi (VERSION): 0.06. |
|
|
|
2015-07-07 Niibe Yutaka <[email protected]> |
|
|
|
* example-fsm-55/sys.c: Include clk_gpio_init.c. |
|
* board/board-stm32f0-discovery.h, board/board-fsm-55.h: Update. |
|
* clk_gpio_init.c (gpio_init): Use VAL_GPIO_LED_*. |
|
|
|
2015-06-29 Niibe Yutaka <[email protected]> |
|
|
|
* board/board-cq-starm.h: New for CQ STARM. |
|
|
|
* clk_gpio_init.c (gpio_init): LED is mandatory, but USB enabler |
|
is optional. |
|
* board/*.h: Update. |
|
|
|
2015-06-22 Niibe Yutaka <[email protected]> |
|
|
|
* clk_gpio_init.c: New, adding ports E/F/G. |
|
* entry.c: Include clk_gpio.init.c if not HAVE_SYS_H. |
|
* example-led/sys.c: Include clk_gpio_init.c. |
|
* example-cdc/sys.c: Ditto. |
|
|
|
* board/board-stm32-primer2.h: New from Kaz Kojima. |
|
|
|
2015-04-20 Niibe Yutaka <[email protected]> |
|
|
|
Merge cortex-m0-support branch. |
|
|
|
* VERSION: 0.05. |
|
|
|
* example-led/sys.c (gpio_init): Support MCU_STM32F0. |
|
(reset): Support __ARM_ARCH_6M__. |
|
* example-led/sample.ld: Change for Cortex-M0. |
|
|
|
* example-fsm-55/*: New example for FSM-55. |
|
|
|
* entry.c (STM32_PPRE1, STM32_PLLSRC, STM32_FLASHBITS) |
|
(STM32_PLLCLKIN): Support MCU_STM32F0. |
|
(struct RCC, RCC_*): Support MCU_STM32F0. |
|
(struct SYSCFG) [MCU_STM32F0]: New. |
|
(struct GPIO, GPIO*): Support MCU_STM32F0. |
|
(clock_init, gpio_init): Support MCU_STM32F0. |
|
(hard_fault, vectors_in_ram, entry): Support Cortex-M0. |
|
|
|
* chopstx.c (chx_cpu_sched_lock, chx_cpu_sched_unlock) |
|
(sched, preempt, svc): Support Cortex-M0. |
|
|
|
* board/board-fsm-55.h: New. |
|
* board/board-stm32f0-discovery.h: New. |
|
|
|
2015-04-17 Niibe Yutaka <[email protected]> |
|
|
|
* chopstx.c (CHX_PRIO_MAIN_INIT): New, removing CHX_PRIO_MAIN. |
|
(chopstx_main_init): New. |
|
(chx_init): Use CHX_PRIO_MAIN_INIT. |
|
|
|
2015-04-08 Niibe Yutaka <[email protected]> |
|
|
|
* board/board-maple-mini.h: New from Aidan Thornton. |
|
|
|
2015-03-17 Niibe Yutaka <[email protected]> |
|
|
|
* VERSION: 0.04a. |
|
|
|
2014-12-10 Niibe Yutaka <[email protected]> |
|
|
|
* Version 0.04. |
|
* doc/chopstx.texi (VERSION): 0.04. |
|
|
|
* board/*.h: Updated. |
|
|
|
* example-cdc/sys.c: Copied from example-led. |
|
|
|
* example-led/sys.c (clock_init, GPIO_USB): Follow the change of |
|
entry.c. |
|
(gpio_init): Use RCC_ENR_IOP_EN and RCC_RSTR_IOP_RST. |
|
(reset): Use ldr instead of mov.w and movt. |
|
|
|
* entry.c (GPIO_USB) [GPIO_USB_BASE]: Conditionally defined. |
|
|
|
* chopstx.c (preempt): Add ! for stm. |
|
(chx_exit): Make sure RETVAL is saved onto r8. |
|
(chopstx_usec_wait_var): Make sure USEC_P is saved onto r8. |
|
|
|
2013-11-27 Niibe Yutaka <[email protected]> |
|
|
|
* board/board-stbee-mini.h: New. |
|
|
|
* entry.c (AFIO_MAPR_SWJ_CFG_DISABLE): New. |
|
|
|
2013-11-26 Niibe Yutaka <[email protected]> |
|
|
|
* board/board-stbee.h: New. |
|
|
|
* rules.mk (OUTFILES) [ENABLE_OUTPUT_HEX]: Add hex generation. |
|
|
|
2013-11-21 Niibe Yutaka <[email protected]> |
|
|
|
* example-cdc/usb_stm32f103.c, example-cdc/usb_lld.h: Update from |
|
Gnuk. |
|
|
|
2013-11-08 Niibe Yutaka <[email protected]> |
|
|
|
* Version 0.03. |
|
* doc/chopstx.texi (VERSION): 0.03. |
|
|
|
* chopstx.c (preempt): Disable interrupt. |
|
|
|
2013-11-08 Niibe Yutaka <[email protected]> |
|
|
|
* Version 0.02. |
|
* doc/chopstx.texi (VERSION): 0.02. |
|
|
|
* example-cdc/usb_stm32f103.c: Updated from NeuG. |
|
|
|
* chopstx.c (CPU_EXCEPTION_PRIORITY_SYSTICK): Equals to |
|
CPU_EXCEPTION_PRIORITY_INTERRUPT. |
|
|
|
2013-11-03 Niibe Yutaka <[email protected]> |
|
|
|
* Version 0.01. |
|
* doc/chopstx.texi (VERSION): 0.01. |
|
|
|
* chopstx.c (chx_clr_intr): New. |
|
(chopstx_intr_wait): Call chopstx.c. |
|
(chx_enable_intr): Let chx_clr_intr clear pending-bit. |
|
|
|
2013-11-02 Niibe Yutaka <[email protected]> |
|
|
|
* example-cdc/usb_lld.h, example-cdc/usb_stm32f103.c: Update from |
|
Gnuk. |
|
* example-cdc/usb-cdc.c (usb_cb_get_descriptor): Follow the |
|
change. |
|
|
|
* example-cdc/sys.c, example-led/sys.c: Update from Gnuk. |
|
|
|
* chopstx.c (CPU_EXCEPTION_PRIORITY_INTERRUPT) |
|
(CPU_EXCEPTION_PRIORITY_PENDSV): Change the value, so that |
|
interrupt priority matches USB interrupt priority of old SYS 1.0 |
|
implementation. |
|
(chx_enable_intr, chx_disable_intr): Clear pending bit at |
|
chx_enable_intr. |
|
(chopstx_intr_wait): Call chx_enable_intr only when it's going to |
|
sleep. |
|
* entry.c (RCC_APB2RSTR_AFIORST, define RCC_APB2ENR_AFIOEN): New. |
|
(AFIO, GPIO_OTHER): New. |
|
(gpio_init): Handle AFIO and GPIO_OTHER. |
|
* board/board-fst-01.h, board/board-stm8s-discovery.h: Add pin-cir |
|
usage. |
|
|
|
2013-08-21 Niibe Yutaka <[email protected]> |
|
|
|
* Version 0.00. |
|
|
|
* doc: Documentation. |
|
* example-led/sys.c: Update from NeuG. |
|
* example-cdc/sys.c: Likewise. |
|
* example-cdc/usb_stm32f103.c: Likewise. |
|
* example-cdc/usb_lld.h: Likewise. |
|
* example-cdc/usb-cdc.c: Likewise. |
|
|
|
2013-08-19 Niibe Yutaka <[email protected]> |
|
|
|
* rules.mk (%.elf): Support OBJS_ADD. |
|
|
|
2013-08-16 Niibe Yutaka <[email protected]> |
|
|
|
* chopstx.c (chopstx_usec_wait_var): Check usec_p at the beginning |
|
of the loop, bug fix of sched-unlocking from sched-unlocked state. |
|
|
|
2013-06-19 Niibe Yutaka <[email protected]> |
|
|
|
* chopstx.h (CHOPSTX_THREAD_SIZE): New. |
|
|
|
* rules.mk (CSRC): Add eventflag.c. |
|
* eventflag.h, eventflag.c: New. |
|
|
|
* chopstx.c (chopstx_main): New. |
|
(chx_init): Initialize chopstx_main. |
|
|
|
* example-cdc/sample.c (usb_intr): No disable/enable interrupt, |
|
but call the handler. |
|
|
|
2013-06-13 Niibe Yutaka <[email protected]> |
|
|
|
* chopstx.c (chopstx_usec_wait_var): Rename (was: |
|
chopstx_usec_wait_internal), as it's user visible. |
|
|
|
2013-06-12 Niibe Yutaka <[email protected]> |
|
|
|
* chopstx.c (chx_init): Inhibit preemption for main thread. |
|
|
|
2013-06-11 Niibe Yutaka <[email protected]> |
|
|
|
* chopstx.c (chx_timer_expired): Use uint16_t here. |
|
(chx_cpu_sched_lock, chx_cpu_sched_unlock): Change only when |
|
its priority is lower than CHOPSTX_PRIO_INHIBIT_PREEMPTION. |
|
|
|
2013-06-06 Niibe Yutaka <[email protected]> |
|
|
|
* entry.c: Include sys.h for clock_init and gpio_init. |
|
|
|
* chopstx.c (PREEMPTION_USEC): Fix the value. |
|
(sched): Check tp != NULL to see flag_sched_rr. |
|
|
|
2013-06-05 Niibe Yutaka <[email protected]> |
|
|
|
* chopstx.c (sched, preempt, svc, chx_timer_expired, chx_exit) |
|
(chopstx_usec_wait, chopstx_mutex_lock, chopstx_cond_wait) |
|
(chopstx_intr_wait, chopstx_join): Implement SCHED_RR. |
|
(chopstx_create): Change API. |
|
(chopstx_wakeup_usec_wait): New. |
|
(chopstx_usec_wait): Accept wakeup to break. |
|
(chopstx_usec_wait_internal): New. |
|
(CHX_FLAGS_MAIN): New. |
|
(chx_systick_init): Add chx_timer_insert for main. |
|
(chx_set_timer): Don't set thread state. |
|
(chopstx_usec_wait_internal): Set thread state to THREAD_WAIT_TIME. |
|
|
|
2013-06-04 Niibe Yutaka <[email protected]> |
|
|
|
* chopstx.c (AIRCR): New. |
|
(chx_init): Setting for PRIGROUP 2-bit:2-bit. |
|
(sched): Unlock cpu_sched_lock on return to thread. |
|
(preempt, chx_timer_expired, chx_handle_intr): Those can be |
|
considered holding cpu_sched_lock (by its equal exception |
|
priorities), thus no acquiring lock required. |
|
(CHX_PRIO_MAIN): New macro. |
|
(chopstx_create): Change API. |
|
(chopstx_attr_init, chopstx_attr_setschedparam) |
|
(chopstx_attr_setstack): Remove. |
|
(chopstx_intr_wait, chopstx_join): Call chx_cpu_sched_unlock. |
|
(chopstx_cleanup_push, chopstx_cleanup_pop): New. |
|
(chopstx_exit): Call cleanup routines. |
|
|
|
2013-06-03 Niibe Yutaka <[email protected]> |
|
|
|
* chopstx.c (chx_spin_lock, chx_spin_unlock): Rename. |
|
(chx_cpu_sched_lock, chx_cpu_sched_unlock): New. |
|
|
|
* chopstx.c (chx_exit): Use R8. |
|
|
|
2013-05-29 Niibe Yutaka <[email protected]> |
|
|
|
* entry.c (entry): Initialize data section. |
|
|
|
* chopstx.c (svc): Implement race avoidance between |
|
chx_handle_intr. |
|
(chx_handle_intr): Increment ->ready. Put to ready queue |
|
only when it's not running. |
|
(chx_sched): Add an argument for race avoidance. |
|
(chopstx_intr_wait): Fix race condition. |
|
(chopstx_cond_broadcast): Fix initial value. |
|
(chopstx_join): Check RET. |
|
(chx_init): Initialize q_exit and q_join. |
|
(chopstx_release_irq, chopstx_release_irq_thread): Enable IRQ on |
|
release (as system reset default). |
|
|
|
* board/board-olimex-stm32-h103.h (NEUG_ADC_SETTING2_*): Add. |
|
|
|
* chopstx.c (chx_mutex_unlock, chopstx_exit): New. |
|
(chopstx_mutex_unlock): Use chx_mutex_unlock. |
|
(chopstx_cond_wait): Fix race condition. |
|
|
|
2013-05-28 Niibe Yutaka <[email protected]> |
|
|
|
* chopstx.c (chopstx_intr_wait): Rename from chopstx_wait_intr. |
|
(chopstx_usec_wait): Rename from chosptx_usleep. |
|
(chopstx_cancel, chopstx_testcancel): New. |
|
(idle): Moved from entry.c and use WFI if USE_WFI_FOR_IDLE. |
|
|
|
2013-05-27 Niibe Yutaka <[email protected]> |
|
|
|
* chopstx.c (chx_fatal, chopstx_exit, chopstx_join): New. |
|
(struct chx_thread): Independent member of state. Use bit fields. |
|
(chx_timer_expired, chx_handle_intr): Check priority before |
|
calling chx_request_preemption. |
|
(chx_disable_intr): Clear pending interrupt too. |
|
(chopstx_claim_irq): Rename from chopstx_intr_register. |
|
(chopstx_release_irq): New. |
|
(chopstx_join): Promote priority of thread to be joined. |
|
|
|
2013-05-24 Niibe Yutaka <[email protected]> |
|
|
|
* chopstx.c (chx_request_preemption): Rename from chx_preempt. |
|
|
|
* entry.c: "sys.h" is only for to new sys 2.0, keeping |
|
compatibility to 1.0, it is if-def out now. |
|
|
|
2013-05-22 Niibe Yutaka <[email protected]> |
|
|
|
* chopstx.c (chx_enable_intr, chx_disable_intr): Implement. |
|
(chx_set_intr_prio): New. |
|
(chx_handle_intr): Use list to register interrupt threads. |
|
(chx_init): Set PendSV priority (as minimum: bigger). |
|
|
|
* entry.c (vector_table): set chx_handle_intr for all interrupts. |
|
|
|
2013-05-21 Niibe Yutaka <[email protected]> |
|
|
|
* Initial commit. |
|
|
|
|