forked from Qortal/Brooklyn
You can not select more than 25 topics
Topics must start with a letter or number, can include dashes ('-') and can be up to 35 characters long.
1427 lines
46 KiB
1427 lines
46 KiB
# SPDX-License-Identifier: GPL-2.0-only |
|
menuconfig REGULATOR |
|
bool "Voltage and Current Regulator Support" |
|
select LINEAR_RANGES |
|
help |
|
Generic Voltage and Current Regulator support. |
|
|
|
This framework is designed to provide a generic interface to voltage |
|
and current regulators within the Linux kernel. It's intended to |
|
provide voltage and current control to client or consumer drivers and |
|
also provide status information to user space applications through a |
|
sysfs interface. |
|
|
|
The intention is to allow systems to dynamically control regulator |
|
output in order to save power and prolong battery life. This applies |
|
to both voltage regulators (where voltage output is controllable) and |
|
current sinks (where current output is controllable). |
|
|
|
This framework safely compiles out if not selected so that client |
|
drivers can still be used in systems with no software controllable |
|
regulators. |
|
|
|
If unsure, say no. |
|
|
|
|
|
if REGULATOR |
|
|
|
config REGULATOR_DEBUG |
|
bool "Regulator debug support" |
|
help |
|
Say yes here to enable debugging support. |
|
|
|
config REGULATOR_FIXED_VOLTAGE |
|
tristate "Fixed voltage regulator support" |
|
help |
|
This driver provides support for fixed voltage regulators, |
|
useful for systems which use a combination of software |
|
managed regulators and simple non-configurable regulators. |
|
|
|
config REGULATOR_VIRTUAL_CONSUMER |
|
tristate "Virtual regulator consumer support" |
|
help |
|
This driver provides a virtual consumer for the voltage and |
|
current regulator API which provides sysfs controls for |
|
configuring the supplies requested. This is mainly useful |
|
for test purposes. |
|
|
|
If unsure, say no. |
|
|
|
config REGULATOR_USERSPACE_CONSUMER |
|
tristate "Userspace regulator consumer support" |
|
help |
|
There are some classes of devices that are controlled entirely |
|
from user space. Userspace consumer driver provides ability to |
|
control power supplies for such devices. |
|
|
|
If unsure, say no. |
|
|
|
config REGULATOR_88PG86X |
|
tristate "Marvell 88PG86X voltage regulators" |
|
depends on I2C |
|
select REGMAP_I2C |
|
help |
|
This driver supports Marvell 88PG867 and 88PG868 voltage regulators. |
|
They provide two I2C-controlled DC/DC step-down converters with |
|
sleep mode and separate enable pins. |
|
|
|
config REGULATOR_88PM800 |
|
tristate "Marvell 88PM800 Power regulators" |
|
depends on MFD_88PM800 |
|
help |
|
This driver supports Marvell 88PM800 voltage regulator chips. |
|
It delivers digitally programmable output, |
|
the voltage is programmed via I2C interface. |
|
It's suitable to support PXA988 chips to control VCC_MAIN and |
|
various voltages. |
|
|
|
config REGULATOR_88PM8607 |
|
tristate "Marvell 88PM8607 Power regulators" |
|
depends on MFD_88PM860X=y |
|
help |
|
This driver supports 88PM8607 voltage regulator chips. |
|
|
|
config REGULATOR_ACT8865 |
|
tristate "Active-semi act8865 voltage regulator" |
|
depends on I2C |
|
depends on POWER_SUPPLY |
|
select REGMAP_I2C |
|
help |
|
This driver controls a active-semi act8865 voltage output |
|
regulator via I2C bus. |
|
|
|
config REGULATOR_ACT8945A |
|
tristate "Active-semi ACT8945A voltage regulator" |
|
depends on MFD_ACT8945A |
|
help |
|
This driver controls a active-semi ACT8945A voltage regulator |
|
via I2C bus. The ACT8945A features three step-down DC/DC converters |
|
and four low-dropout linear regulators, along with a ActivePath |
|
battery charger. |
|
|
|
config REGULATOR_AD5398 |
|
tristate "Analog Devices AD5398/AD5821 regulators" |
|
depends on I2C |
|
help |
|
This driver supports AD5398 and AD5821 current regulator chips. |
|
If building into module, its name is ad5398.ko. |
|
|
|
config REGULATOR_ANATOP |
|
tristate "Freescale i.MX on-chip ANATOP LDO regulators" |
|
depends on ARCH_MXC || COMPILE_TEST |
|
depends on MFD_SYSCON |
|
help |
|
Say y here to support Freescale i.MX on-chip ANATOP LDOs |
|
regulators. It is recommended that this option be |
|
enabled on i.MX6 platform. |
|
|
|
config REGULATOR_AAT2870 |
|
tristate "AnalogicTech AAT2870 Regulators" |
|
depends on MFD_AAT2870_CORE |
|
help |
|
If you have a AnalogicTech AAT2870 say Y to enable the |
|
regulator driver. |
|
|
|
config REGULATOR_AB8500 |
|
bool "ST-Ericsson AB8500 Power Regulators" |
|
depends on AB8500_CORE |
|
help |
|
This driver supports the regulators found on the ST-Ericsson mixed |
|
signal AB8500 PMIC |
|
|
|
config REGULATOR_ARIZONA_LDO1 |
|
tristate "Cirrus Madera and Wolfson Arizona class devices LDO1" |
|
depends on MFD_ARIZONA || MFD_MADERA |
|
depends on SND_SOC |
|
help |
|
Support for the LDO1 regulators found on Cirrus Logic Madera codecs |
|
and Wolfson Microelectronic Arizona codecs. |
|
|
|
config REGULATOR_ARIZONA_MICSUPP |
|
tristate "Cirrus Madera and Wolfson Arizona class devices MICSUPP" |
|
depends on MFD_ARIZONA || MFD_MADERA |
|
depends on SND_SOC |
|
help |
|
Support for the MICSUPP regulators found on Cirrus Logic Madera codecs |
|
and Wolfson Microelectronic Arizona codecs |
|
devices. |
|
|
|
config REGULATOR_ARM_SCMI |
|
tristate "SCMI based regulator driver" |
|
depends on ARM_SCMI_PROTOCOL && OF |
|
help |
|
This adds the regulator driver support for ARM platforms using SCMI |
|
protocol for device voltage management. |
|
This driver uses SCMI Message Protocol driver to interact with the |
|
firmware providing the device Voltage functionality. |
|
|
|
config REGULATOR_AS3711 |
|
tristate "AS3711 PMIC" |
|
depends on MFD_AS3711 |
|
help |
|
This driver provides support for the voltage regulators on the |
|
AS3711 PMIC |
|
|
|
config REGULATOR_AS3722 |
|
tristate "AMS AS3722 PMIC Regulators" |
|
depends on MFD_AS3722 |
|
help |
|
This driver provides support for the voltage regulators on the |
|
AS3722 PMIC. This will enable support for all the software |
|
controllable DCDC/LDO regulators. |
|
|
|
config REGULATOR_ATC260X |
|
tristate "Actions Semi ATC260x PMIC Regulators" |
|
depends on MFD_ATC260X |
|
help |
|
This driver provides support for the voltage regulators on the |
|
ATC260x PMICs. This will enable support for all the software |
|
controllable DCDC/LDO regulators. |
|
|
|
config REGULATOR_AXP20X |
|
tristate "X-POWERS AXP20X PMIC Regulators" |
|
depends on MFD_AXP20X |
|
help |
|
This driver provides support for the voltage regulators on the |
|
AXP20X PMIC. |
|
|
|
config REGULATOR_BCM590XX |
|
tristate "Broadcom BCM590xx PMU Regulators" |
|
depends on MFD_BCM590XX |
|
help |
|
This driver provides support for the voltage regulators on the |
|
BCM590xx PMUs. This will enable support for the software |
|
controllable LDO/Switching regulators. |
|
|
|
config REGULATOR_BD71815 |
|
tristate "ROHM BD71815 Power Regulator" |
|
depends on MFD_ROHM_BD71828 |
|
select REGULATOR_ROHM |
|
help |
|
This driver supports voltage regulators on ROHM BD71815 PMIC. |
|
This will enable support for the software controllable buck |
|
and LDO regulators and a current regulator for LEDs. |
|
|
|
This driver can also be built as a module. If so, the module |
|
will be called bd71815-regulator. |
|
|
|
config REGULATOR_BD71828 |
|
tristate "ROHM BD71828 Power Regulator" |
|
depends on MFD_ROHM_BD71828 |
|
select REGULATOR_ROHM |
|
help |
|
This driver supports voltage regulators on ROHM BD71828 PMIC. |
|
This will enable support for the software controllable buck |
|
and LDO regulators. |
|
|
|
This driver can also be built as a module. If so, the module |
|
will be called bd71828-regulator. |
|
|
|
config REGULATOR_BD718XX |
|
tristate "ROHM BD71837 Power Regulator" |
|
depends on MFD_ROHM_BD718XX |
|
select REGULATOR_ROHM |
|
help |
|
This driver supports voltage regulators on ROHM BD71837 PMIC. |
|
This will enable support for the software controllable buck |
|
and LDO regulators. |
|
|
|
This driver can also be built as a module. If so, the module |
|
will be called bd718x7-regulator. |
|
|
|
config REGULATOR_BD9571MWV |
|
tristate "ROHM BD9571MWV Regulators" |
|
depends on MFD_BD9571MWV |
|
help |
|
This driver provides support for the voltage regulators on the |
|
ROHM BD9571MWV PMIC. This will enable support for the software |
|
controllable regulator and voltage sampling units. |
|
|
|
This driver can also be built as a module. If so, the module |
|
will be called bd9571mwv-regulator. |
|
|
|
config REGULATOR_BD957XMUF |
|
tristate "ROHM BD9576MUF and BD9573MUF Regulators" |
|
depends on MFD_ROHM_BD957XMUF |
|
help |
|
This driver supports voltage regulators on ROHM BD9576MUF and |
|
BD9573MUF PMICs. |
|
|
|
This driver can also be built as a module. If so, the module |
|
will be called bd9576-regulator. |
|
|
|
config REGULATOR_CPCAP |
|
tristate "Motorola CPCAP regulator" |
|
depends on MFD_CPCAP |
|
help |
|
Say y here for CPCAP regulator found on some Motorola phones |
|
and tablets such as Droid 4. |
|
|
|
config REGULATOR_CROS_EC |
|
tristate "ChromeOS EC regulators" |
|
depends on CROS_EC && OF |
|
help |
|
This driver supports voltage regulators that is connected to ChromeOS |
|
EC and controlled through EC host commands. |
|
|
|
This driver can also be built as a module. If so, the module |
|
will be called cros-ec-regulator. |
|
|
|
config REGULATOR_DA903X |
|
tristate "Dialog Semiconductor DA9030/DA9034 regulators" |
|
depends on PMIC_DA903X |
|
depends on !CC_IS_CLANG # https://bugs.llvm.org/show_bug.cgi?id=38789 |
|
help |
|
Say y here to support the BUCKs and LDOs regulators found on |
|
Dialog Semiconductor DA9030/DA9034 PMIC. |
|
|
|
config REGULATOR_DA9052 |
|
tristate "Dialog Semiconductor DA9052/DA9053 regulators" |
|
depends on PMIC_DA9052 |
|
help |
|
This driver supports the voltage regulators of DA9052-BC and |
|
DA9053-AA/Bx PMIC. |
|
|
|
config REGULATOR_DA9055 |
|
tristate "Dialog Semiconductor DA9055 regulators" |
|
depends on MFD_DA9055 |
|
help |
|
Say y here to support the BUCKs and LDOs regulators found on |
|
Dialog Semiconductor DA9055 PMIC. |
|
|
|
This driver can also be built as a module. If so, the module |
|
will be called da9055-regulator. |
|
|
|
config REGULATOR_DA9062 |
|
tristate "Dialog Semiconductor DA9061/62 regulators" |
|
depends on MFD_DA9062 |
|
help |
|
Say y here to support the BUCKs and LDOs regulators found on |
|
DA9061 and DA9062 PMICs. |
|
|
|
This driver can also be built as a module. If so, the module |
|
will be called da9062-regulator. |
|
|
|
config REGULATOR_DA9063 |
|
tristate "Dialog Semiconductor DA9063 regulators" |
|
depends on MFD_DA9063 && OF |
|
help |
|
Say y here to support the BUCKs and LDOs regulators found on |
|
DA9063 PMICs. |
|
|
|
This driver can also be built as a module. If so, the module |
|
will be called da9063-regulator. |
|
|
|
config REGULATOR_DA9121 |
|
tristate "Dialog Semiconductor DA9121/DA9122/DA9220/DA9217/DA9130/DA9131/DA9132 regulator" |
|
depends on I2C && OF |
|
select REGMAP_I2C |
|
help |
|
Say y here to support for the Dialog Semiconductor DA9121. The |
|
DA9121 is a single channel dual-phase buck converter controlled |
|
through an I2C interface. |
|
|
|
DA9121 Single-channel dual-phase 10A buck converter |
|
DA9130 Single-channel dual-phase 10A buck converter (Automotive) |
|
DA9217 Single-channel dual-phase 6A buck converter |
|
DA9122 Dual-channel single-phase 5A buck converter |
|
DA9131 Dual-channel single-phase 5A buck converter (Automotive) |
|
DA9220 Dual-channel single-phase 3A buck converter |
|
DA9132 Dual-channel single-phase 3A buck converter (Automotive) |
|
|
|
This driver can also be built as a module. If so, the module |
|
will be called da9121-regulator. |
|
|
|
config REGULATOR_DA9210 |
|
tristate "Dialog Semiconductor DA9210 regulator" |
|
depends on I2C |
|
select REGMAP_I2C |
|
help |
|
Say y here to support for the Dialog Semiconductor DA9210. |
|
The DA9210 is a multi-phase synchronous step down |
|
converter 12A DC-DC Buck controlled through an I2C |
|
interface. |
|
|
|
config REGULATOR_DA9211 |
|
tristate "Dialog Semiconductor DA9211/DA9212/DA9213/DA9223/DA9214/DA9224/DA9215/DA9225 regulator" |
|
depends on I2C |
|
select REGMAP_I2C |
|
help |
|
Say y here to support for the Dialog Semiconductor DA9211/DA9212 |
|
/DA9213/DA9214/DA9215. |
|
The DA9211/DA9212/DA9213/DA9214/DA9215 is a multi-phase synchronous |
|
step down converter 12A or 16A DC-DC Buck controlled through an I2C |
|
interface. |
|
|
|
config REGULATOR_DBX500_PRCMU |
|
bool |
|
|
|
config REGULATOR_DB8500_PRCMU |
|
bool "ST-Ericsson DB8500 Voltage Domain Regulators" |
|
depends on MFD_DB8500_PRCMU |
|
select REGULATOR_DBX500_PRCMU |
|
help |
|
This driver supports the voltage domain regulators controlled by the |
|
DB8500 PRCMU |
|
|
|
config REGULATOR_FAN53555 |
|
tristate "Fairchild FAN53555 Regulator" |
|
depends on I2C |
|
select REGMAP_I2C |
|
help |
|
This driver supports Fairchild FAN53555 Digitally Programmable |
|
TinyBuck Regulator. The FAN53555 is a step-down switching voltage |
|
regulator that delivers a digitally programmable output from an |
|
input voltage supply of 2.5V to 5.5V. The output voltage is |
|
programmed through an I2C interface. |
|
|
|
config REGULATOR_FAN53880 |
|
tristate "Fairchild FAN53880 Regulator" |
|
depends on I2C && (OF || COMPILE_TEST) |
|
select REGMAP_I2C |
|
help |
|
This driver supports Fairchild (ON Semiconductor) FAN53880 |
|
regulator. The regulator is a programmable power management IC |
|
(PMIC), it is controlled by I2C and provides one BUCK, one BOOST |
|
and four LDO outputs. |
|
|
|
config REGULATOR_GPIO |
|
tristate "GPIO regulator support" |
|
depends on GPIOLIB || COMPILE_TEST |
|
help |
|
This driver provides support for regulators that can be |
|
controlled via gpios. |
|
It is capable of supporting current and voltage regulators |
|
and the platform has to provide a mapping of GPIO-states |
|
to target volts/amps. |
|
|
|
config REGULATOR_HI6421 |
|
tristate "HiSilicon Hi6421 PMIC voltage regulator support" |
|
depends on MFD_HI6421_PMIC && OF |
|
help |
|
This driver provides support for the voltage regulators on the |
|
HiSilicon Hi6421 PMU / Codec IC. |
|
Hi6421 is a multi-function device which, on regulator part, provides |
|
21 general purpose LDOs, 3 dedicated LDOs, and 5 BUCKs. All |
|
of them come with support to either ECO (idle) or sleep mode. |
|
|
|
config REGULATOR_HI6421V530 |
|
tristate "HiSilicon Hi6421v530 PMIC voltage regulator support" |
|
depends on MFD_HI6421_PMIC && OF |
|
help |
|
This driver provides support for the voltage regulators on |
|
HiSilicon Hi6421v530 PMU / Codec IC. |
|
Hi6421v530 is a multi-function device which, on regulator part, |
|
provides 5 general purpose LDOs, and all of them come with support |
|
to either ECO (idle) or sleep mode. |
|
|
|
config REGULATOR_HI655X |
|
tristate "Hisilicon HI655X PMIC regulators support" |
|
depends on ARCH_HISI || COMPILE_TEST |
|
depends on MFD_HI655X_PMIC && OF |
|
help |
|
This driver provides support for the voltage regulators of the |
|
Hisilicon Hi655x PMIC device. |
|
|
|
config REGULATOR_HI6421V600 |
|
tristate "HiSilicon Hi6421v600 PMIC voltage regulator support" |
|
depends on MFD_HI6421_SPMI && OF |
|
select REGMAP |
|
help |
|
This driver provides support for the voltage regulators on |
|
HiSilicon Hi6421v600 PMU / Codec IC. |
|
This is used on Kirin 3670 boards, like HiKey 970. |
|
|
|
config REGULATOR_ISL9305 |
|
tristate "Intersil ISL9305 regulator" |
|
depends on I2C |
|
select REGMAP_I2C |
|
help |
|
This driver supports ISL9305 voltage regulator chip. |
|
|
|
config REGULATOR_ISL6271A |
|
tristate "Intersil ISL6271A Power regulator" |
|
depends on I2C |
|
help |
|
This driver supports ISL6271A voltage regulator chip. |
|
|
|
config REGULATOR_LM363X |
|
tristate "TI LM363X voltage regulators" |
|
depends on MFD_TI_LMU |
|
help |
|
This driver supports LM3631, LM3632 and LM36274 voltage regulators for |
|
the LCD bias. |
|
One boost output voltage is configurable and always on. |
|
Other LDOs are used for the display module. |
|
|
|
config REGULATOR_LOCHNAGAR |
|
tristate "Cirrus Logic Lochnagar regulator driver" |
|
depends on MFD_LOCHNAGAR |
|
help |
|
This enables regulator support on the Cirrus Logic Lochnagar audio |
|
development board. |
|
|
|
config REGULATOR_LP3971 |
|
tristate "National Semiconductors LP3971 PMIC regulator driver" |
|
depends on I2C |
|
help |
|
Say Y here to support the voltage regulators and convertors |
|
on National Semiconductors LP3971 PMIC |
|
|
|
config REGULATOR_LP3972 |
|
tristate "National Semiconductors LP3972 PMIC regulator driver" |
|
depends on I2C |
|
help |
|
Say Y here to support the voltage regulators and convertors |
|
on National Semiconductors LP3972 PMIC |
|
|
|
config REGULATOR_LP872X |
|
tristate "TI/National Semiconductor LP8720/LP8725 voltage regulators" |
|
depends on I2C |
|
select REGMAP_I2C |
|
help |
|
This driver supports LP8720/LP8725 PMIC |
|
|
|
config REGULATOR_LP873X |
|
tristate "TI LP873X Power regulators" |
|
depends on MFD_TI_LP873X && OF |
|
help |
|
This driver supports LP873X voltage regulator chips. LP873X |
|
provides two step-down converters and two general-purpose LDO |
|
voltage regulators. It supports software based voltage control |
|
for different voltage domains |
|
|
|
config REGULATOR_LP8755 |
|
tristate "TI LP8755 High Performance PMU driver" |
|
depends on I2C |
|
select REGMAP_I2C |
|
help |
|
This driver supports LP8755 High Performance PMU driver. This |
|
chip contains six step-down DC/DC converters which can support |
|
9 mode multiphase configuration. |
|
|
|
config REGULATOR_LP87565 |
|
tristate "TI LP87565 Power regulators" |
|
depends on MFD_TI_LP87565 && OF |
|
help |
|
This driver supports LP87565 voltage regulator chips. LP87565 |
|
provides four step-down converters. It supports software based |
|
voltage control for different voltage domains |
|
|
|
config REGULATOR_LP8788 |
|
tristate "TI LP8788 Power Regulators" |
|
depends on MFD_LP8788 |
|
help |
|
This driver supports LP8788 voltage regulator chip. |
|
|
|
config REGULATOR_LTC3589 |
|
tristate "LTC3589 8-output voltage regulator" |
|
depends on I2C |
|
select REGMAP_I2C |
|
help |
|
This enables support for the LTC3589, LTC3589-1, and LTC3589-2 |
|
8-output regulators controlled via I2C. |
|
|
|
config REGULATOR_LTC3676 |
|
tristate "LTC3676 8-output voltage regulator" |
|
depends on I2C |
|
select REGMAP_I2C |
|
help |
|
This enables support for the LTC3676 |
|
8-output regulators controlled via I2C. |
|
|
|
config REGULATOR_MAX14577 |
|
tristate "Maxim 14577/77836 regulator" |
|
depends on MFD_MAX14577 |
|
help |
|
This driver controls a Maxim MAX14577/77836 regulator via I2C bus. |
|
The MAX14577 regulators include safeout LDO and charger current |
|
regulator. The MAX77836 has two additional LDOs. |
|
|
|
config REGULATOR_MAX1586 |
|
tristate "Maxim 1586/1587 voltage regulator" |
|
depends on I2C |
|
help |
|
This driver controls a Maxim 1586 or 1587 voltage output |
|
regulator via I2C bus. The provided regulator is suitable |
|
for PXA27x chips to control VCC_CORE and VCC_USIM voltages. |
|
|
|
config REGULATOR_MAX77620 |
|
tristate "Maxim 77620/MAX20024 voltage regulator" |
|
depends on MFD_MAX77620 || COMPILE_TEST |
|
help |
|
This driver controls Maxim MAX77620 voltage output regulator |
|
via I2C bus. The provided regulator is suitable for Tegra |
|
chip to control Step-Down DC-DC and LDOs. Say Y here to |
|
enable the regulator driver. |
|
|
|
config REGULATOR_MAX77650 |
|
tristate "Maxim MAX77650/77651 regulator support" |
|
depends on MFD_MAX77650 || COMPILE_TEST |
|
help |
|
Regulator driver for MAX77650/77651 PMIC from Maxim |
|
Semiconductor. This device has a SIMO with three independent |
|
power rails and an LDO. |
|
|
|
config REGULATOR_MAX8649 |
|
tristate "Maxim 8649 voltage regulator" |
|
depends on I2C |
|
select REGMAP_I2C |
|
help |
|
This driver controls a Maxim 8649 voltage output regulator via |
|
I2C bus. |
|
|
|
config REGULATOR_MAX8660 |
|
tristate "Maxim 8660/8661 voltage regulator" |
|
depends on I2C |
|
help |
|
This driver controls a Maxim 8660/8661 voltage output |
|
regulator via I2C bus. |
|
|
|
config REGULATOR_MAX8893 |
|
tristate "Maxim 8893 voltage regulator" |
|
depends on I2C |
|
select REGMAP_I2C |
|
help |
|
This driver controls a Maxim 8893 voltage output |
|
regulator via I2C bus. |
|
|
|
config REGULATOR_MAX8907 |
|
tristate "Maxim 8907 voltage regulator" |
|
depends on MFD_MAX8907 || COMPILE_TEST |
|
help |
|
This driver controls a Maxim 8907 voltage output regulator |
|
via I2C bus. The provided regulator is suitable for Tegra |
|
chip to control Step-Down DC-DC and LDOs. |
|
|
|
config REGULATOR_MAX8925 |
|
tristate "Maxim MAX8925 Power Management IC" |
|
depends on MFD_MAX8925 |
|
help |
|
Say y here to support the voltage regulator of Maxim MAX8925 PMIC. |
|
|
|
config REGULATOR_MAX8952 |
|
tristate "Maxim MAX8952 Power Management IC" |
|
depends on I2C |
|
help |
|
This driver controls a Maxim 8952 voltage output regulator |
|
via I2C bus. Maxim 8952 has one voltage output and supports 4 DVS |
|
modes ranging from 0.77V to 1.40V by 0.01V steps. |
|
|
|
config REGULATOR_MAX8973 |
|
tristate "Maxim MAX8973 voltage regulator " |
|
depends on I2C |
|
depends on THERMAL && THERMAL_OF |
|
select REGMAP_I2C |
|
help |
|
The MAXIM MAX8973 high-efficiency. three phase, DC-DC step-down |
|
switching regulator delivers up to 9A of output current. Each |
|
phase operates at a 2MHz fixed frequency with a 120 deg shift |
|
from the adjacent phase, allowing the use of small magnetic component. |
|
|
|
config REGULATOR_MAX8997 |
|
tristate "Maxim 8997/8966 regulator" |
|
depends on MFD_MAX8997 |
|
help |
|
This driver controls a Maxim 8997/8966 regulator |
|
via I2C bus. The provided regulator is suitable for S5PC110, |
|
S5PV210, and Exynos-4 chips to control VCC_CORE and |
|
VCC_USIM voltages. |
|
|
|
config REGULATOR_MAX8998 |
|
tristate "Maxim 8998 voltage regulator" |
|
depends on MFD_MAX8998 |
|
help |
|
This driver controls a Maxim 8998 voltage output regulator |
|
via I2C bus. The provided regulator is suitable for S3C6410 |
|
and S5PC1XX chips to control VCC_CORE and VCC_USIM voltages. |
|
|
|
config REGULATOR_MAX77686 |
|
tristate "Maxim 77686 regulator" |
|
depends on MFD_MAX77686 || COMPILE_TEST |
|
help |
|
This driver controls a Maxim 77686 regulator |
|
via I2C bus. The provided regulator is suitable for |
|
Exynos-4 chips to control VARM and VINT voltages. |
|
|
|
config REGULATOR_MAX77693 |
|
tristate "Maxim 77693/77843 regulator" |
|
depends on MFD_MAX77693 || MFD_MAX77843 || COMPILE_TEST |
|
help |
|
This driver controls a Maxim 77693/77843 regulators via I2C bus. |
|
The regulators include two LDOs, 'SAFEOUT1', 'SAFEOUT2' |
|
and one current regulator 'CHARGER'. This is suitable for |
|
Exynos-4x12 (MAX77693) or Exynos5433 (MAX77843) SoC chips. |
|
|
|
config REGULATOR_MAX77802 |
|
tristate "Maxim 77802 regulator" |
|
depends on MFD_MAX77686 || COMPILE_TEST |
|
help |
|
This driver controls a Maxim 77802 regulator |
|
via I2C bus. The provided regulator is suitable for |
|
Exynos5420/Exynos5800 SoCs to control various voltages. |
|
It includes support for control of voltage and ramp speed. |
|
|
|
config REGULATOR_MAX77826 |
|
tristate "Maxim 77826 regulator" |
|
depends on I2C |
|
select REGMAP_I2C |
|
help |
|
This driver controls a Maxim 77826 regulator via I2C bus. |
|
The regulator include 15 LDOs, BUCK and BUCK BOOST regulator. |
|
It includes support for control of output voltage. This |
|
regulator is found on the Samsung Galaxy S5 (klte) smartphone. |
|
|
|
config REGULATOR_MC13XXX_CORE |
|
tristate |
|
|
|
config REGULATOR_MC13783 |
|
tristate "Freescale MC13783 regulator driver" |
|
depends on MFD_MC13XXX |
|
select REGULATOR_MC13XXX_CORE |
|
help |
|
Say y here to support the regulators found on the Freescale MC13783 |
|
PMIC. |
|
|
|
config REGULATOR_MC13892 |
|
tristate "Freescale MC13892 regulator driver" |
|
depends on MFD_MC13XXX |
|
select REGULATOR_MC13XXX_CORE |
|
help |
|
Say y here to support the regulators found on the Freescale MC13892 |
|
PMIC. |
|
|
|
config REGULATOR_MCP16502 |
|
tristate "Microchip MCP16502 PMIC" |
|
depends on I2C && OF |
|
select REGMAP_I2C |
|
help |
|
Say y here to support the MCP16502 PMIC. This driver supports |
|
basic operations (get/set voltage, get/set operating mode) |
|
through the regulator interface. In addition it enables |
|
suspend-to-ram/standby transition. |
|
|
|
config REGULATOR_MP5416 |
|
tristate "Monolithic MP5416 PMIC" |
|
depends on I2C && OF |
|
select REGMAP_I2C |
|
help |
|
Say y here to support the MP5416 PMIC. This will enable supports |
|
the software controllable 4 buck and 4 LDO regulators. |
|
Say M here if you want to include support for the regulator as a |
|
module. |
|
|
|
config REGULATOR_MP8859 |
|
tristate "MPS MP8859 regulator driver" |
|
depends on I2C |
|
select REGMAP_I2C |
|
help |
|
Say y here to support the MP8859 voltage regulator. This driver |
|
supports basic operations (get/set voltage) through the regulator |
|
interface. |
|
Say M here if you want to include support for the regulator as a |
|
module. The module will be named "mp8859". |
|
|
|
config REGULATOR_MP886X |
|
tristate "MPS MP8869 regulator driver" |
|
depends on I2C && (OF || COMPILE_TEST) |
|
select REGMAP_I2C |
|
help |
|
This driver supports the MP8869 voltage regulator. |
|
|
|
config REGULATOR_MPQ7920 |
|
tristate "Monolithic MPQ7920 PMIC" |
|
depends on I2C && OF |
|
select REGMAP_I2C |
|
help |
|
Say y here to support the MPQ7920 PMIC. This will enable supports |
|
the software controllable 4 buck and 5 LDO regulators. |
|
This driver supports the control of different power rails of device |
|
through regulator interface. |
|
|
|
config REGULATOR_MT6311 |
|
tristate "MediaTek MT6311 PMIC" |
|
depends on I2C |
|
select REGMAP_I2C |
|
help |
|
Say y here to select this option to enable the power regulator of |
|
MediaTek MT6311 PMIC. |
|
This driver supports the control of different power rails of device |
|
through regulator interface. |
|
|
|
config REGULATOR_MT6315 |
|
tristate "MediaTek MT6315 PMIC" |
|
depends on SPMI |
|
select REGMAP_SPMI |
|
help |
|
Say y here to select this option to enable the power regulator of |
|
MediaTek MT6315 PMIC. |
|
This driver supports the control of different power rails of device |
|
through regulator interface. |
|
|
|
config REGULATOR_MT6323 |
|
tristate "MediaTek MT6323 PMIC" |
|
depends on MFD_MT6397 |
|
help |
|
Say y here to select this option to enable the power regulator of |
|
MediaTek MT6323 PMIC. |
|
This driver supports the control of different power rails of device |
|
through regulator interface. |
|
|
|
config REGULATOR_MT6358 |
|
tristate "MediaTek MT6358 PMIC" |
|
depends on MFD_MT6397 |
|
help |
|
Say y here to select this option to enable the power regulator of |
|
MediaTek MT6358 PMIC. |
|
This driver supports the control of different power rails of device |
|
through regulator interface. |
|
|
|
config REGULATOR_MT6359 |
|
tristate "MediaTek MT6359 PMIC" |
|
depends on MFD_MT6397 |
|
help |
|
Say y here to select this option to enable the power regulator of |
|
MediaTek MT6359 PMIC. |
|
This driver supports the control of different power rails of device |
|
through regulator interface. |
|
|
|
config REGULATOR_MT6360 |
|
tristate "MT6360 SubPMIC Regulator" |
|
depends on MFD_MT6360 |
|
help |
|
Say Y here to enable MT6360 regulator support. |
|
This is support MT6360 PMIC/LDO part include |
|
2-channel buck with Thermal Shutdown and Overload Protection |
|
6-channel High PSRR and Low Dropout LDO. |
|
|
|
config REGULATOR_MT6380 |
|
tristate "MediaTek MT6380 PMIC" |
|
depends on MTK_PMIC_WRAP |
|
help |
|
Say y here to select this option to enable the power regulator of |
|
MediaTek MT6380 PMIC. |
|
This driver supports the control of different power rails of device |
|
through regulator interface. |
|
|
|
config REGULATOR_MT6397 |
|
tristate "MediaTek MT6397 PMIC" |
|
depends on MFD_MT6397 |
|
help |
|
Say y here to select this option to enable the power regulator of |
|
MediaTek MT6397 PMIC. |
|
This driver supports the control of different power rails of device |
|
through regulator interface. |
|
|
|
config REGULATOR_MTK_DVFSRC |
|
tristate "MediaTek DVFSRC regulator driver" |
|
depends on MTK_DVFSRC |
|
help |
|
Say y here to control regulator by DVFSRC (dynamic voltage |
|
and frequency scaling resource collector). |
|
This driver supports to control regulators via the DVFSRC |
|
of Mediatek. It allows for voting on regulator state |
|
between multiple users. |
|
|
|
config REGULATOR_PALMAS |
|
tristate "TI Palmas PMIC Regulators" |
|
depends on MFD_PALMAS |
|
help |
|
If you wish to control the regulators on the Palmas series of |
|
chips say Y here. This will enable support for all the software |
|
controllable SMPS/LDO regulators. |
|
|
|
The regulators available on Palmas series chips vary depending |
|
on the muxing. This is handled automatically in the driver by |
|
reading the mux info from OTP. |
|
|
|
config REGULATOR_PBIAS |
|
tristate "PBIAS OMAP regulator driver" |
|
depends on (ARCH_OMAP || COMPILE_TEST) && MFD_SYSCON |
|
help |
|
Say y here to support pbias regulator for mmc1:SD card i/o |
|
on OMAP SoCs. |
|
This driver provides support for OMAP pbias modelled |
|
regulators. |
|
|
|
config REGULATOR_PCA9450 |
|
tristate "NXP PCA9450A/PCA9450B/PCA9450C regulator driver" |
|
depends on I2C |
|
select REGMAP_I2C |
|
help |
|
Say y here to support the NXP PCA9450A/PCA9450B/PCA9450C PMIC |
|
regulator driver. |
|
|
|
config REGULATOR_PCAP |
|
tristate "Motorola PCAP2 regulator driver" |
|
depends on EZX_PCAP |
|
help |
|
This driver provides support for the voltage regulators of the |
|
PCAP2 PMIC. |
|
|
|
config REGULATOR_PCF50633 |
|
tristate "NXP PCF50633 regulator driver" |
|
depends on MFD_PCF50633 |
|
help |
|
Say Y here to support the voltage regulators and converters |
|
on PCF50633 |
|
|
|
config REGULATOR_PF8X00 |
|
tristate "NXP PF8100/PF8121A/PF8200 regulator driver" |
|
depends on I2C && OF |
|
select REGMAP_I2C |
|
help |
|
Say y here to support the regulators found on the NXP |
|
PF8100/PF8121A/PF8200 PMIC. |
|
|
|
Say M here if you want to support for the regulators found |
|
on the NXP PF8100/PF8121A/PF8200 PMIC. The module will be named |
|
"pf8x00-regulator". |
|
|
|
config REGULATOR_PFUZE100 |
|
tristate "Freescale PFUZE100/200/3000/3001 regulator driver" |
|
depends on I2C && OF |
|
select REGMAP_I2C |
|
help |
|
Say y here to support the regulators found on the Freescale |
|
PFUZE100/200/3000/3001 PMIC. |
|
|
|
config REGULATOR_PV88060 |
|
tristate "Powerventure Semiconductor PV88060 regulator" |
|
depends on I2C |
|
select REGMAP_I2C |
|
help |
|
Say y here to support the voltage regulators and convertors |
|
PV88060 |
|
|
|
config REGULATOR_PV88080 |
|
tristate "Powerventure Semiconductor PV88080 regulator" |
|
depends on I2C |
|
select REGMAP_I2C |
|
help |
|
Say y here to support the buck convertors on PV88080 |
|
|
|
config REGULATOR_PV88090 |
|
tristate "Powerventure Semiconductor PV88090 regulator" |
|
depends on I2C |
|
select REGMAP_I2C |
|
help |
|
Say y here to support the voltage regulators and convertors |
|
on PV88090 |
|
|
|
config REGULATOR_PWM |
|
tristate "PWM voltage regulator" |
|
depends on PWM |
|
help |
|
This driver supports PWM controlled voltage regulators. PWM |
|
duty cycle can increase or decrease the voltage. |
|
|
|
config REGULATOR_QCOM_RPM |
|
tristate "Qualcomm RPM regulator driver" |
|
depends on MFD_QCOM_RPM |
|
help |
|
If you say yes to this option, support will be included for the |
|
regulators exposed by the Resource Power Manager found in Qualcomm |
|
8660, 8960 and 8064 based devices. |
|
|
|
Say M here if you want to include support for the regulators on the |
|
Qualcomm RPM as a module. The module will be named |
|
"qcom_rpm-regulator". |
|
|
|
config REGULATOR_QCOM_RPMH |
|
tristate "Qualcomm Technologies, Inc. RPMh regulator driver" |
|
depends on QCOM_RPMH || (QCOM_RPMH=n && COMPILE_TEST) |
|
depends on QCOM_COMMAND_DB || (QCOM_COMMAND_DB=n && COMPILE_TEST) |
|
help |
|
This driver supports control of PMIC regulators via the RPMh hardware |
|
block found on Qualcomm Technologies Inc. SoCs. RPMh regulator |
|
control allows for voting on regulator state between multiple |
|
processors within the SoC. |
|
|
|
config REGULATOR_QCOM_SMD_RPM |
|
tristate "Qualcomm SMD based RPM regulator driver" |
|
depends on QCOM_SMD_RPM |
|
help |
|
If you say yes to this option, support will be included for the |
|
regulators exposed by the Resource Power Manager found in Qualcomm |
|
8974 based devices. |
|
|
|
Say M here if you want to include support for the regulators on the |
|
Qualcomm RPM as a module. The module will be named |
|
"qcom_smd-regulator". |
|
|
|
config REGULATOR_QCOM_SPMI |
|
tristate "Qualcomm SPMI regulator driver" |
|
depends on SPMI || COMPILE_TEST |
|
help |
|
If you say yes to this option, support will be included for the |
|
regulators found in Qualcomm SPMI PMICs. |
|
|
|
Say M here if you want to include support for the regulators on the |
|
Qualcomm SPMI PMICs as a module. The module will be named |
|
"qcom_spmi-regulator". |
|
|
|
config REGULATOR_QCOM_USB_VBUS |
|
tristate "Qualcomm USB Vbus regulator driver" |
|
depends on SPMI || COMPILE_TEST |
|
help |
|
If you say yes to this option, support will be included for the |
|
regulator used to enable the VBUS output. |
|
|
|
Say M here if you want to include support for enabling the VBUS output |
|
as a module. The module will be named "qcom_usb_vbus_regulator". |
|
|
|
config REGULATOR_RASPBERRYPI_TOUCHSCREEN_ATTINY |
|
tristate "Raspberry Pi 7-inch touchscreen panel ATTINY regulator" |
|
depends on BACKLIGHT_CLASS_DEVICE |
|
depends on I2C |
|
select REGMAP_I2C |
|
help |
|
This driver supports ATTINY regulator on the Raspberry Pi 7-inch |
|
touchscreen unit. The regulator is used to enable power to the |
|
TC358762, display and to control backlight. |
|
|
|
config REGULATOR_RC5T583 |
|
tristate "RICOH RC5T583 Power regulators" |
|
depends on MFD_RC5T583 |
|
help |
|
Select this option to enable the power regulator of RICOH |
|
PMIC RC5T583. |
|
This driver supports the control of different power rails of device |
|
through regulator interface. The device supports multiple DCDC/LDO |
|
outputs which can be controlled by i2c communication. |
|
|
|
config REGULATOR_RK808 |
|
tristate "Rockchip RK805/RK808/RK809/RK817/RK818 Power regulators" |
|
depends on MFD_RK808 |
|
help |
|
Select this option to enable the power regulator of ROCKCHIP |
|
PMIC RK805,RK809&RK817,RK808 and RK818. |
|
This driver supports the control of different power rails of device |
|
through regulator interface. The device supports multiple DCDC/LDO |
|
outputs which can be controlled by i2c communication. |
|
|
|
config REGULATOR_RN5T618 |
|
tristate "Ricoh RN5T567/618 voltage regulators" |
|
depends on MFD_RN5T618 |
|
help |
|
Say y here to support the regulators found on Ricoh RN5T567, |
|
RN5T618 or RC5T619 PMIC. |
|
|
|
config REGULATOR_ROHM |
|
tristate |
|
|
|
config REGULATOR_RT4801 |
|
tristate "Richtek RT4801 Regulators" |
|
depends on I2C |
|
select REGMAP_I2C |
|
help |
|
This adds support for voltage regulators in Richtek RT4801 Display Bias IC. |
|
The device supports two regulators (DSVP/DSVN). |
|
|
|
config REGULATOR_RT4831 |
|
tristate "Richtek RT4831 DSV Regulators" |
|
depends on MFD_RT4831 |
|
help |
|
This adds support for voltage regulators in Richtek RT4831. |
|
There are three regulators (VLCM/DSVP/DSVN). |
|
VLCM is a virtual voltage input for DSVP/DSVN inside IC. |
|
And DSVP/DSVN is the real Vout range from 4V to 6.5V. |
|
It's common used to provide the power for the display panel. |
|
|
|
config REGULATOR_RT5033 |
|
tristate "Richtek RT5033 Regulators" |
|
depends on MFD_RT5033 |
|
help |
|
This adds support for voltage and current regulators in Richtek |
|
RT5033 PMIC. The device supports multiple regulators like |
|
current source, LDO and Buck. |
|
|
|
config REGULATOR_RT6160 |
|
tristate "Richtek RT6160 BuckBoost voltage regulator" |
|
depends on I2C |
|
select REGMAP_I2C |
|
help |
|
This adds support for voltage regulator in Richtek RT6160. |
|
This device automatically change voltage output mode from |
|
Buck or Boost. The mode transition depend on the input source voltage. |
|
The wide output range is from 2025mV to 5200mV and can be used on most |
|
common application scenario. |
|
|
|
config REGULATOR_RT6245 |
|
tristate "Richtek RT6245 voltage regulator" |
|
depends on I2C |
|
select REGMAP_I2C |
|
help |
|
This adds support for Richtek RT6245 voltage regulator. |
|
It can support up to 14A output current and adjustable output voltage |
|
from 0.4375V to 1.3875V, per step 12.5mV. |
|
|
|
config REGULATOR_RTQ2134 |
|
tristate "Richtek RTQ2134 SubPMIC Regulator" |
|
depends on I2C |
|
select REGMAP_I2C |
|
help |
|
This driver adds support for RTQ2134 SubPMIC regulators. |
|
The RTQ2134 is a multi-phase, programmable power management IC that |
|
integrate with four high efficient, synchronous step-down converter |
|
cores. It features wide output voltage range and the capability to |
|
configure the corresponding power stages. |
|
|
|
config REGULATOR_RTMV20 |
|
tristate "Richtek RTMV20 Laser Diode Regulator" |
|
depends on I2C |
|
select REGMAP_I2C |
|
help |
|
This driver adds support for the load switch current regulator on |
|
the Richtek RTMV20. It can support the load current up to 6A and |
|
integrate strobe/vsync/fsin signal to synchronize the IR camera. |
|
|
|
config REGULATOR_RTQ6752 |
|
tristate "Richtek RTQ6752 TFT LCD voltage regulator" |
|
depends on I2C |
|
select REGMAP_I2C |
|
help |
|
This driver adds support for Richtek RTQ6752. RTQ6752 includes two |
|
synchronous boost converters for PAVDD, and one synchronous NAVDD |
|
buck-boost. This device is suitable for automotive TFT-LCD panel. |
|
|
|
config REGULATOR_S2MPA01 |
|
tristate "Samsung S2MPA01 voltage regulator" |
|
depends on MFD_SEC_CORE || COMPILE_TEST |
|
help |
|
This driver controls Samsung S2MPA01 voltage output regulator |
|
via I2C bus. S2MPA01 has 10 Bucks and 26 LDO outputs. |
|
|
|
config REGULATOR_S2MPS11 |
|
tristate "Samsung S2MPS11/13/14/15/S2MPU02 voltage regulator" |
|
depends on MFD_SEC_CORE || COMPILE_TEST |
|
help |
|
This driver supports a Samsung S2MPS11/13/14/15/S2MPU02 voltage |
|
output regulator via I2C bus. The chip is comprised of high efficient |
|
Buck converters including Dual-Phase Buck converter, Buck-Boost |
|
converter, various LDOs. |
|
|
|
config REGULATOR_S5M8767 |
|
tristate "Samsung S5M8767A voltage regulator" |
|
depends on MFD_SEC_CORE || COMPILE_TEST |
|
help |
|
This driver supports a Samsung S5M8767A voltage output regulator |
|
via I2C bus. S5M8767A have 9 Bucks and 28 LDOs output and |
|
supports DVS mode with 8bits of output voltage control. |
|
|
|
config REGULATOR_SC2731 |
|
tristate "Spreadtrum SC2731 power regulator driver" |
|
depends on MFD_SC27XX_PMIC || COMPILE_TEST |
|
help |
|
This driver provides support for the voltage regulators on the |
|
SC2731 PMIC. |
|
|
|
config REGULATOR_SKY81452 |
|
tristate "Skyworks Solutions SKY81452 voltage regulator" |
|
depends on MFD_SKY81452 |
|
help |
|
This driver supports Skyworks SKY81452 voltage output regulator |
|
via I2C bus. SKY81452 has one voltage linear regulator can be |
|
programmed from 4.5V to 20V. |
|
|
|
This driver can also be built as a module. If so, the module |
|
will be called sky81452-regulator. |
|
|
|
config REGULATOR_SLG51000 |
|
tristate "Dialog Semiconductor SLG51000 regulators" |
|
depends on I2C |
|
select REGMAP_I2C |
|
help |
|
Say y here to support for the Dialog Semiconductor SLG51000. |
|
The SLG51000 is seven compact and customizable low dropout |
|
regulators. |
|
|
|
config REGULATOR_STM32_BOOSTER |
|
tristate "STMicroelectronics STM32 BOOSTER" |
|
depends on ARCH_STM32 || COMPILE_TEST |
|
help |
|
This driver supports internal booster (3V3) embedded in some |
|
STMicroelectronics STM32 chips. It can be used to supply ADC analog |
|
input switches when vdda supply is below 2.7V. |
|
|
|
This driver can also be built as a module. If so, the module |
|
will be called stm32-booster. |
|
|
|
config REGULATOR_STM32_VREFBUF |
|
tristate "STMicroelectronics STM32 VREFBUF" |
|
depends on ARCH_STM32 || COMPILE_TEST |
|
help |
|
This driver supports STMicroelectronics STM32 VREFBUF (voltage |
|
reference buffer) which can be used as voltage reference for |
|
internal ADCs, DACs and also for external components through |
|
dedicated Vref+ pin. |
|
|
|
This driver can also be built as a module. If so, the module |
|
will be called stm32-vrefbuf. |
|
|
|
config REGULATOR_STM32_PWR |
|
bool "STMicroelectronics STM32 PWR" |
|
depends on ARCH_STM32 || COMPILE_TEST |
|
help |
|
This driver supports internal regulators (1V1, 1V8, 3V3) in the |
|
STMicroelectronics STM32 chips. |
|
|
|
config REGULATOR_STPMIC1 |
|
tristate "STMicroelectronics STPMIC1 PMIC Regulators" |
|
depends on MFD_STPMIC1 |
|
help |
|
This driver supports STMicroelectronics STPMIC1 PMIC voltage |
|
regulators and switches. The STPMIC1 regulators supply power to |
|
an application processor as well as to external system |
|
peripherals such as DDR, Flash memories and system devices. |
|
|
|
To compile this driver as a module, choose M here: the |
|
module will be called stpmic1_regulator. |
|
|
|
config REGULATOR_TI_ABB |
|
tristate "TI Adaptive Body Bias on-chip LDO" |
|
depends on ARCH_OMAP |
|
help |
|
Select this option to support Texas Instruments' on-chip Adaptive Body |
|
Bias (ABB) LDO regulators. It is recommended that this option be |
|
enabled on required TI SoC. Certain Operating Performance Points |
|
on TI SoCs may be unstable without enabling this as it provides |
|
device specific optimized bias to allow/optimize functionality. |
|
|
|
config REGULATOR_STW481X_VMMC |
|
bool "ST Microelectronics STW481X VMMC regulator" |
|
depends on MFD_STW481X || COMPILE_TEST |
|
default y if MFD_STW481X |
|
help |
|
This driver supports the internal VMMC regulator in the STw481x |
|
PMIC chips. |
|
|
|
config REGULATOR_SY7636A |
|
tristate "Silergy SY7636A voltage regulator" |
|
depends on MFD_SY7636A |
|
help |
|
This driver supports Silergy SY3686A voltage regulator. |
|
|
|
config REGULATOR_SY8106A |
|
tristate "Silergy SY8106A regulator" |
|
depends on I2C && (OF || COMPILE_TEST) |
|
select REGMAP_I2C |
|
help |
|
This driver supports SY8106A single output regulator. |
|
|
|
config REGULATOR_SY8824X |
|
tristate "Silergy SY8824C/SY8824E regulator" |
|
depends on I2C && (OF || COMPILE_TEST) |
|
select REGMAP_I2C |
|
help |
|
This driver supports SY8824C single output regulator. |
|
|
|
config REGULATOR_SY8827N |
|
tristate "Silergy SY8827N regulator" |
|
depends on I2C && (OF || COMPILE_TEST) |
|
select REGMAP_I2C |
|
help |
|
This driver supports SY8827N single output regulator. |
|
|
|
config REGULATOR_TPS51632 |
|
tristate "TI TPS51632 Power Regulator" |
|
depends on I2C |
|
select REGMAP_I2C |
|
help |
|
This driver supports TPS51632 voltage regulator chip. |
|
The TPS51632 is 3-2-1 Phase D-Cap+ Step Down Driverless Controller |
|
with Serial VID control and DVFS. |
|
The voltage output can be configure through I2C interface or PWM |
|
interface. |
|
|
|
config REGULATOR_TPS6105X |
|
tristate "TI TPS6105X Power regulators" |
|
depends on TPS6105X |
|
default y if TPS6105X |
|
help |
|
This driver supports TPS61050/TPS61052 voltage regulator chips. |
|
It is a single boost converter primarily for white LEDs and |
|
audio amplifiers. |
|
|
|
config REGULATOR_TPS62360 |
|
tristate "TI TPS6236x Power Regulator" |
|
depends on I2C |
|
select REGMAP_I2C |
|
help |
|
This driver supports TPS6236x voltage regulator chip. This |
|
regulator is meant for processor core supply. This chip is |
|
high-frequency synchronous step down dc-dc converter optimized |
|
for battery-powered portable applications. |
|
|
|
config REGULATOR_TPS65023 |
|
tristate "TI TPS65023 Power regulators" |
|
depends on I2C |
|
select REGMAP_I2C |
|
help |
|
This driver supports TPS65023 voltage regulator chips. TPS65023 provides |
|
three step-down converters and two general-purpose LDO voltage regulators. |
|
It supports TI's software based Class-2 SmartReflex implementation. |
|
|
|
config REGULATOR_TPS6507X |
|
tristate "TI TPS6507X Power regulators" |
|
depends on I2C |
|
help |
|
This driver supports TPS6507X voltage regulator chips. TPS6507X provides |
|
three step-down converters and two general-purpose LDO voltage regulators. |
|
It supports TI's software based Class-2 SmartReflex implementation. |
|
|
|
config REGULATOR_TPS65086 |
|
tristate "TI TPS65086 Power regulators" |
|
depends on MFD_TPS65086 |
|
help |
|
This driver provides support for the voltage regulators on |
|
TI TPS65086 PMICs. |
|
|
|
config REGULATOR_TPS65090 |
|
tristate "TI TPS65090 Power regulator" |
|
depends on MFD_TPS65090 |
|
help |
|
This driver provides support for the voltage regulators on the |
|
TI TPS65090 PMIC. |
|
|
|
config REGULATOR_TPS65132 |
|
tristate "TI TPS65132 Dual Output Power regulators" |
|
depends on I2C && GPIOLIB |
|
select REGMAP_I2C |
|
help |
|
This driver supports TPS65132 single inductor - dual output |
|
power supply specifically designed for display panels. |
|
|
|
config REGULATOR_TPS65217 |
|
tristate "TI TPS65217 Power regulators" |
|
depends on MFD_TPS65217 |
|
help |
|
This driver supports TPS65217 voltage regulator chips. TPS65217 |
|
provides three step-down converters and four general-purpose LDO |
|
voltage regulators. It supports software based voltage control |
|
for different voltage domains |
|
|
|
config REGULATOR_TPS65218 |
|
tristate "TI TPS65218 Power regulators" |
|
depends on MFD_TPS65218 && OF |
|
help |
|
This driver supports TPS65218 voltage regulator chips. TPS65218 |
|
provides six step-down converters and one general-purpose LDO |
|
voltage regulators. It supports software based voltage control |
|
for different voltage domains |
|
|
|
config REGULATOR_TPS6524X |
|
tristate "TI TPS6524X Power regulators" |
|
depends on SPI |
|
help |
|
This driver supports TPS6524X voltage regulator chips. TPS6524X |
|
provides three step-down converters and two general-purpose LDO |
|
voltage regulators. This device is interfaced using a customized |
|
serial interface currently supported on the sequencer serial |
|
port controller. |
|
|
|
config REGULATOR_TPS6586X |
|
tristate "TI TPS6586X Power regulators" |
|
depends on MFD_TPS6586X |
|
help |
|
This driver supports TPS6586X voltage regulator chips. |
|
|
|
config REGULATOR_TPS65910 |
|
tristate "TI TPS65910/TPS65911 Power Regulators" |
|
depends on MFD_TPS65910 |
|
help |
|
This driver supports TPS65910/TPS65911 voltage regulator chips. |
|
|
|
config REGULATOR_TPS65912 |
|
tristate "TI TPS65912 Power regulator" |
|
depends on MFD_TPS65912 |
|
help |
|
This driver supports TPS65912 voltage regulator chip. |
|
|
|
config REGULATOR_TPS80031 |
|
tristate "TI TPS80031/TPS80032 power regulator driver" |
|
depends on MFD_TPS80031 |
|
help |
|
TPS80031/ TPS80032 Fully Integrated Power Management with Power |
|
Path and Battery Charger. It has 5 configurable step-down |
|
converters, 11 general purpose LDOs, VBUS generator and digital |
|
output to control regulators. |
|
|
|
config REGULATOR_TWL4030 |
|
tristate "TI TWL4030/TWL5030/TWL6030/TPS659x0 PMIC" |
|
depends on TWL4030_CORE |
|
help |
|
This driver supports the voltage regulators provided by |
|
this family of companion chips. |
|
|
|
config REGULATOR_UNIPHIER |
|
tristate "UniPhier regulator driver" |
|
depends on ARCH_UNIPHIER || COMPILE_TEST |
|
depends on OF |
|
select REGMAP_MMIO |
|
default ARCH_UNIPHIER |
|
help |
|
Support for regulators implemented on Socionext UniPhier SoCs. |
|
|
|
config REGULATOR_VCTRL |
|
tristate "Voltage controlled regulators" |
|
depends on OF |
|
help |
|
This driver provides support for voltage regulators whose output |
|
voltage is controlled by the voltage of another regulator. |
|
|
|
config REGULATOR_VEXPRESS |
|
tristate "Versatile Express regulators" |
|
depends on VEXPRESS_CONFIG |
|
help |
|
This driver provides support for voltage regulators available |
|
on the ARM Ltd's Versatile Express platform. |
|
|
|
config REGULATOR_VQMMC_IPQ4019 |
|
tristate "IPQ4019 VQMMC SD LDO regulator support" |
|
depends on ARCH_QCOM |
|
help |
|
This driver provides support for the VQMMC LDO I/0 |
|
voltage regulator of the IPQ4019 SD/EMMC controller. |
|
|
|
config REGULATOR_WM831X |
|
tristate "Wolfson Microelectronics WM831x PMIC regulators" |
|
depends on MFD_WM831X |
|
help |
|
Support the voltage and current regulators of the WM831x series |
|
of PMIC devices. |
|
|
|
config REGULATOR_WM8350 |
|
tristate "Wolfson Microelectronics WM8350 AudioPlus PMIC" |
|
depends on MFD_WM8350 |
|
help |
|
This driver provides support for the voltage and current regulators |
|
of the WM8350 AudioPlus PMIC. |
|
|
|
config REGULATOR_WM8400 |
|
tristate "Wolfson Microelectronics WM8400 AudioPlus PMIC" |
|
depends on MFD_WM8400 |
|
help |
|
This driver provides support for the voltage regulators of the |
|
WM8400 AudioPlus PMIC. |
|
|
|
config REGULATOR_WM8994 |
|
tristate "Wolfson Microelectronics WM8994 CODEC" |
|
depends on MFD_WM8994 |
|
help |
|
This driver provides support for the voltage regulators on the |
|
WM8994 CODEC. |
|
|
|
config REGULATOR_QCOM_LABIBB |
|
tristate "QCOM LAB/IBB regulator support" |
|
depends on SPMI || COMPILE_TEST |
|
help |
|
This driver supports Qualcomm's LAB/IBB regulators present on the |
|
Qualcomm's PMIC chip pmi8998. QCOM LAB and IBB are SPMI |
|
based PMIC implementations. LAB can be used as positive |
|
boost regulator and IBB can be used as a negative boost regulator |
|
for LCD display panel. |
|
|
|
endif |
|
|
|
|