forked from Qortal/Brooklyn
You can not select more than 25 topics
Topics must start with a letter or number, can include dashes ('-') and can be up to 35 characters long.
405 lines
11 KiB
405 lines
11 KiB
// SPDX-License-Identifier: GPL-2.0-or-later |
|
/* |
|
* PlayStation 1/2 joypads via SPI interface Driver |
|
* |
|
* Copyright (C) 2017 Tomohiro Yoshidomi <[email protected]> |
|
* |
|
* PlayStation 1/2 joypad's plug (not socket) |
|
* 123 456 789 |
|
* (...|...|...) |
|
* |
|
* 1: DAT -> MISO (pullup with 1k owm to 3.3V) |
|
* 2: CMD -> MOSI |
|
* 3: 9V (for motor, if not use N.C.) |
|
* 4: GND |
|
* 5: 3.3V |
|
* 6: Attention -> CS(SS) |
|
* 7: SCK -> SCK |
|
* 8: N.C. |
|
* 9: ACK -> N.C. |
|
*/ |
|
|
|
#include <linux/kernel.h> |
|
#include <linux/device.h> |
|
#include <linux/input.h> |
|
#include <linux/module.h> |
|
#include <linux/spi/spi.h> |
|
#include <linux/types.h> |
|
#include <linux/pm.h> |
|
#include <linux/pm_runtime.h> |
|
|
|
#define REVERSE_BIT(x) ((((x) & 0x80) >> 7) | (((x) & 0x40) >> 5) | \ |
|
(((x) & 0x20) >> 3) | (((x) & 0x10) >> 1) | (((x) & 0x08) << 1) | \ |
|
(((x) & 0x04) << 3) | (((x) & 0x02) << 5) | (((x) & 0x01) << 7)) |
|
|
|
/* PlayStation 1/2 joypad command and response are LSBFIRST. */ |
|
|
|
/* |
|
* 0x01, 0x42, 0x00, 0x00, 0x00, |
|
* 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, |
|
* 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00 |
|
*/ |
|
static const u8 PSX_CMD_POLL[] = { |
|
0x80, 0x42, 0x00, 0x00, 0x00, |
|
0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, |
|
0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00 |
|
}; |
|
/* 0x01, 0x43, 0x00, 0x01, 0x00, 0x00, 0x00, 0x00, 0x00 */ |
|
static const u8 PSX_CMD_ENTER_CFG[] = { |
|
0x80, 0xC2, 0x00, 0x80, 0x00, 0x00, 0x00, 0x00, 0x00 |
|
}; |
|
/* 0x01, 0x43, 0x00, 0x00, 0x5A, 0x5A, 0x5A, 0x5A, 0x5A */ |
|
static const u8 PSX_CMD_EXIT_CFG[] = { |
|
0x80, 0xC2, 0x00, 0x00, 0x5A, 0x5A, 0x5A, 0x5A, 0x5A |
|
}; |
|
/* 0x01, 0x4D, 0x00, 0x00, 0x01, 0xFF, 0xFF, 0xFF, 0xFF */ |
|
static const u8 PSX_CMD_ENABLE_MOTOR[] = { |
|
0x80, 0xB2, 0x00, 0x00, 0x80, 0xFF, 0xFF, 0xFF, 0xFF |
|
}; |
|
|
|
struct psxpad { |
|
struct spi_device *spi; |
|
struct input_dev *idev; |
|
char phys[0x20]; |
|
bool motor1enable; |
|
bool motor2enable; |
|
u8 motor1level; |
|
u8 motor2level; |
|
u8 sendbuf[0x20] ____cacheline_aligned; |
|
u8 response[sizeof(PSX_CMD_POLL)] ____cacheline_aligned; |
|
}; |
|
|
|
static int psxpad_command(struct psxpad *pad, const u8 sendcmdlen) |
|
{ |
|
struct spi_transfer xfers = { |
|
.tx_buf = pad->sendbuf, |
|
.rx_buf = pad->response, |
|
.len = sendcmdlen, |
|
}; |
|
int err; |
|
|
|
err = spi_sync_transfer(pad->spi, &xfers, 1); |
|
if (err) { |
|
dev_err(&pad->spi->dev, |
|
"%s: failed to SPI xfers mode: %d\n", |
|
__func__, err); |
|
return err; |
|
} |
|
|
|
return 0; |
|
} |
|
|
|
#ifdef CONFIG_JOYSTICK_PSXPAD_SPI_FF |
|
static void psxpad_control_motor(struct psxpad *pad, |
|
bool motor1enable, bool motor2enable) |
|
{ |
|
int err; |
|
|
|
pad->motor1enable = motor1enable; |
|
pad->motor2enable = motor2enable; |
|
|
|
memcpy(pad->sendbuf, PSX_CMD_ENTER_CFG, sizeof(PSX_CMD_ENTER_CFG)); |
|
err = psxpad_command(pad, sizeof(PSX_CMD_ENTER_CFG)); |
|
if (err) { |
|
dev_err(&pad->spi->dev, |
|
"%s: failed to enter config mode: %d\n", |
|
__func__, err); |
|
return; |
|
} |
|
|
|
memcpy(pad->sendbuf, PSX_CMD_ENABLE_MOTOR, |
|
sizeof(PSX_CMD_ENABLE_MOTOR)); |
|
pad->sendbuf[3] = pad->motor1enable ? 0x00 : 0xFF; |
|
pad->sendbuf[4] = pad->motor2enable ? 0x80 : 0xFF; |
|
err = psxpad_command(pad, sizeof(PSX_CMD_ENABLE_MOTOR)); |
|
if (err) { |
|
dev_err(&pad->spi->dev, |
|
"%s: failed to enable motor mode: %d\n", |
|
__func__, err); |
|
return; |
|
} |
|
|
|
memcpy(pad->sendbuf, PSX_CMD_EXIT_CFG, sizeof(PSX_CMD_EXIT_CFG)); |
|
err = psxpad_command(pad, sizeof(PSX_CMD_EXIT_CFG)); |
|
if (err) { |
|
dev_err(&pad->spi->dev, |
|
"%s: failed to exit config mode: %d\n", |
|
__func__, err); |
|
return; |
|
} |
|
} |
|
|
|
static void psxpad_set_motor_level(struct psxpad *pad, |
|
u8 motor1level, u8 motor2level) |
|
{ |
|
pad->motor1level = motor1level ? 0xFF : 0x00; |
|
pad->motor2level = REVERSE_BIT(motor2level); |
|
} |
|
|
|
static int psxpad_spi_play_effect(struct input_dev *idev, |
|
void *data, struct ff_effect *effect) |
|
{ |
|
struct psxpad *pad = input_get_drvdata(idev); |
|
|
|
switch (effect->type) { |
|
case FF_RUMBLE: |
|
psxpad_set_motor_level(pad, |
|
(effect->u.rumble.weak_magnitude >> 8) & 0xFFU, |
|
(effect->u.rumble.strong_magnitude >> 8) & 0xFFU); |
|
break; |
|
} |
|
|
|
return 0; |
|
} |
|
|
|
static int psxpad_spi_init_ff(struct psxpad *pad) |
|
{ |
|
int err; |
|
|
|
input_set_capability(pad->idev, EV_FF, FF_RUMBLE); |
|
|
|
err = input_ff_create_memless(pad->idev, NULL, psxpad_spi_play_effect); |
|
if (err) { |
|
dev_err(&pad->spi->dev, |
|
"input_ff_create_memless() failed: %d\n", err); |
|
return err; |
|
} |
|
|
|
return 0; |
|
} |
|
|
|
#else /* CONFIG_JOYSTICK_PSXPAD_SPI_FF */ |
|
|
|
static void psxpad_control_motor(struct psxpad *pad, |
|
bool motor1enable, bool motor2enable) |
|
{ |
|
} |
|
|
|
static void psxpad_set_motor_level(struct psxpad *pad, |
|
u8 motor1level, u8 motor2level) |
|
{ |
|
} |
|
|
|
static inline int psxpad_spi_init_ff(struct psxpad *pad) |
|
{ |
|
return 0; |
|
} |
|
#endif /* CONFIG_JOYSTICK_PSXPAD_SPI_FF */ |
|
|
|
static int psxpad_spi_poll_open(struct input_dev *input) |
|
{ |
|
struct psxpad *pad = input_get_drvdata(input); |
|
|
|
pm_runtime_get_sync(&pad->spi->dev); |
|
|
|
return 0; |
|
} |
|
|
|
static void psxpad_spi_poll_close(struct input_dev *input) |
|
{ |
|
struct psxpad *pad = input_get_drvdata(input); |
|
|
|
pm_runtime_put_sync(&pad->spi->dev); |
|
} |
|
|
|
static void psxpad_spi_poll(struct input_dev *input) |
|
{ |
|
struct psxpad *pad = input_get_drvdata(input); |
|
u8 b_rsp3, b_rsp4; |
|
int err; |
|
|
|
psxpad_control_motor(pad, true, true); |
|
|
|
memcpy(pad->sendbuf, PSX_CMD_POLL, sizeof(PSX_CMD_POLL)); |
|
pad->sendbuf[3] = pad->motor1enable ? pad->motor1level : 0x00; |
|
pad->sendbuf[4] = pad->motor2enable ? pad->motor2level : 0x00; |
|
err = psxpad_command(pad, sizeof(PSX_CMD_POLL)); |
|
if (err) { |
|
dev_err(&pad->spi->dev, |
|
"%s: poll command failed mode: %d\n", __func__, err); |
|
return; |
|
} |
|
|
|
switch (pad->response[1]) { |
|
case 0xCE: /* 0x73 : analog 1 */ |
|
/* button data is inverted */ |
|
b_rsp3 = ~pad->response[3]; |
|
b_rsp4 = ~pad->response[4]; |
|
|
|
input_report_abs(input, ABS_X, REVERSE_BIT(pad->response[7])); |
|
input_report_abs(input, ABS_Y, REVERSE_BIT(pad->response[8])); |
|
input_report_abs(input, ABS_RX, REVERSE_BIT(pad->response[5])); |
|
input_report_abs(input, ABS_RY, REVERSE_BIT(pad->response[6])); |
|
input_report_key(input, BTN_DPAD_UP, b_rsp3 & BIT(3)); |
|
input_report_key(input, BTN_DPAD_DOWN, b_rsp3 & BIT(1)); |
|
input_report_key(input, BTN_DPAD_LEFT, b_rsp3 & BIT(0)); |
|
input_report_key(input, BTN_DPAD_RIGHT, b_rsp3 & BIT(2)); |
|
input_report_key(input, BTN_X, b_rsp4 & BIT(3)); |
|
input_report_key(input, BTN_A, b_rsp4 & BIT(2)); |
|
input_report_key(input, BTN_B, b_rsp4 & BIT(1)); |
|
input_report_key(input, BTN_Y, b_rsp4 & BIT(0)); |
|
input_report_key(input, BTN_TL, b_rsp4 & BIT(5)); |
|
input_report_key(input, BTN_TR, b_rsp4 & BIT(4)); |
|
input_report_key(input, BTN_TL2, b_rsp4 & BIT(7)); |
|
input_report_key(input, BTN_TR2, b_rsp4 & BIT(6)); |
|
input_report_key(input, BTN_THUMBL, b_rsp3 & BIT(6)); |
|
input_report_key(input, BTN_THUMBR, b_rsp3 & BIT(5)); |
|
input_report_key(input, BTN_SELECT, b_rsp3 & BIT(7)); |
|
input_report_key(input, BTN_START, b_rsp3 & BIT(4)); |
|
break; |
|
|
|
case 0x82: /* 0x41 : digital */ |
|
/* button data is inverted */ |
|
b_rsp3 = ~pad->response[3]; |
|
b_rsp4 = ~pad->response[4]; |
|
|
|
input_report_abs(input, ABS_X, 0x80); |
|
input_report_abs(input, ABS_Y, 0x80); |
|
input_report_abs(input, ABS_RX, 0x80); |
|
input_report_abs(input, ABS_RY, 0x80); |
|
input_report_key(input, BTN_DPAD_UP, b_rsp3 & BIT(3)); |
|
input_report_key(input, BTN_DPAD_DOWN, b_rsp3 & BIT(1)); |
|
input_report_key(input, BTN_DPAD_LEFT, b_rsp3 & BIT(0)); |
|
input_report_key(input, BTN_DPAD_RIGHT, b_rsp3 & BIT(2)); |
|
input_report_key(input, BTN_X, b_rsp4 & BIT(3)); |
|
input_report_key(input, BTN_A, b_rsp4 & BIT(2)); |
|
input_report_key(input, BTN_B, b_rsp4 & BIT(1)); |
|
input_report_key(input, BTN_Y, b_rsp4 & BIT(0)); |
|
input_report_key(input, BTN_TL, b_rsp4 & BIT(5)); |
|
input_report_key(input, BTN_TR, b_rsp4 & BIT(4)); |
|
input_report_key(input, BTN_TL2, b_rsp4 & BIT(7)); |
|
input_report_key(input, BTN_TR2, b_rsp4 & BIT(6)); |
|
input_report_key(input, BTN_THUMBL, false); |
|
input_report_key(input, BTN_THUMBR, false); |
|
input_report_key(input, BTN_SELECT, b_rsp3 & BIT(7)); |
|
input_report_key(input, BTN_START, b_rsp3 & BIT(4)); |
|
break; |
|
} |
|
|
|
input_sync(input); |
|
} |
|
|
|
static int psxpad_spi_probe(struct spi_device *spi) |
|
{ |
|
struct psxpad *pad; |
|
struct input_dev *idev; |
|
int err; |
|
|
|
pad = devm_kzalloc(&spi->dev, sizeof(struct psxpad), GFP_KERNEL); |
|
if (!pad) |
|
return -ENOMEM; |
|
|
|
idev = devm_input_allocate_device(&spi->dev); |
|
if (!idev) { |
|
dev_err(&spi->dev, "failed to allocate input device\n"); |
|
return -ENOMEM; |
|
} |
|
|
|
/* input poll device settings */ |
|
pad->idev = idev; |
|
pad->spi = spi; |
|
|
|
/* input device settings */ |
|
input_set_drvdata(idev, pad); |
|
|
|
idev->name = "PlayStation 1/2 joypad"; |
|
snprintf(pad->phys, sizeof(pad->phys), "%s/input", dev_name(&spi->dev)); |
|
idev->id.bustype = BUS_SPI; |
|
|
|
idev->open = psxpad_spi_poll_open; |
|
idev->close = psxpad_spi_poll_close; |
|
|
|
/* key/value map settings */ |
|
input_set_abs_params(idev, ABS_X, 0, 255, 0, 0); |
|
input_set_abs_params(idev, ABS_Y, 0, 255, 0, 0); |
|
input_set_abs_params(idev, ABS_RX, 0, 255, 0, 0); |
|
input_set_abs_params(idev, ABS_RY, 0, 255, 0, 0); |
|
input_set_capability(idev, EV_KEY, BTN_DPAD_UP); |
|
input_set_capability(idev, EV_KEY, BTN_DPAD_DOWN); |
|
input_set_capability(idev, EV_KEY, BTN_DPAD_LEFT); |
|
input_set_capability(idev, EV_KEY, BTN_DPAD_RIGHT); |
|
input_set_capability(idev, EV_KEY, BTN_A); |
|
input_set_capability(idev, EV_KEY, BTN_B); |
|
input_set_capability(idev, EV_KEY, BTN_X); |
|
input_set_capability(idev, EV_KEY, BTN_Y); |
|
input_set_capability(idev, EV_KEY, BTN_TL); |
|
input_set_capability(idev, EV_KEY, BTN_TR); |
|
input_set_capability(idev, EV_KEY, BTN_TL2); |
|
input_set_capability(idev, EV_KEY, BTN_TR2); |
|
input_set_capability(idev, EV_KEY, BTN_THUMBL); |
|
input_set_capability(idev, EV_KEY, BTN_THUMBR); |
|
input_set_capability(idev, EV_KEY, BTN_SELECT); |
|
input_set_capability(idev, EV_KEY, BTN_START); |
|
|
|
err = psxpad_spi_init_ff(pad); |
|
if (err) |
|
return err; |
|
|
|
/* SPI settings */ |
|
spi->mode = SPI_MODE_3; |
|
spi->bits_per_word = 8; |
|
/* (PlayStation 1/2 joypad might be possible works 250kHz/500kHz) */ |
|
spi->master->min_speed_hz = 125000; |
|
spi->master->max_speed_hz = 125000; |
|
spi_setup(spi); |
|
|
|
/* pad settings */ |
|
psxpad_set_motor_level(pad, 0, 0); |
|
|
|
|
|
err = input_setup_polling(idev, psxpad_spi_poll); |
|
if (err) { |
|
dev_err(&spi->dev, "failed to set up polling: %d\n", err); |
|
return err; |
|
} |
|
|
|
/* poll interval is about 60fps */ |
|
input_set_poll_interval(idev, 16); |
|
input_set_min_poll_interval(idev, 8); |
|
input_set_max_poll_interval(idev, 32); |
|
|
|
/* register input poll device */ |
|
err = input_register_device(idev); |
|
if (err) { |
|
dev_err(&spi->dev, |
|
"failed to register input device: %d\n", err); |
|
return err; |
|
} |
|
|
|
pm_runtime_enable(&spi->dev); |
|
|
|
return 0; |
|
} |
|
|
|
static int __maybe_unused psxpad_spi_suspend(struct device *dev) |
|
{ |
|
struct spi_device *spi = to_spi_device(dev); |
|
struct psxpad *pad = spi_get_drvdata(spi); |
|
|
|
psxpad_set_motor_level(pad, 0, 0); |
|
|
|
return 0; |
|
} |
|
|
|
static SIMPLE_DEV_PM_OPS(psxpad_spi_pm, psxpad_spi_suspend, NULL); |
|
|
|
static const struct spi_device_id psxpad_spi_id[] = { |
|
{ "psxpad-spi", 0 }, |
|
{ } |
|
}; |
|
MODULE_DEVICE_TABLE(spi, psxpad_spi_id); |
|
|
|
static struct spi_driver psxpad_spi_driver = { |
|
.driver = { |
|
.name = "psxpad-spi", |
|
.pm = &psxpad_spi_pm, |
|
}, |
|
.id_table = psxpad_spi_id, |
|
.probe = psxpad_spi_probe, |
|
}; |
|
|
|
module_spi_driver(psxpad_spi_driver); |
|
|
|
MODULE_AUTHOR("Tomohiro Yoshidomi <[email protected]>"); |
|
MODULE_DESCRIPTION("PlayStation 1/2 joypads via SPI interface Driver"); |
|
MODULE_LICENSE("GPL");
|
|
|