forked from Qortal/Brooklyn
You can not select more than 25 topics
Topics must start with a letter or number, can include dashes ('-') and can be up to 35 characters long.
444 lines
10 KiB
444 lines
10 KiB
/* SPDX-License-Identifier: GPL-2.0-or-later */ |
|
/* |
|
* linux/arch/arm/mm/proc-arm922.S: MMU functions for ARM922 |
|
* |
|
* Copyright (C) 1999,2000 ARM Limited |
|
* Copyright (C) 2000 Deep Blue Solutions Ltd. |
|
* Copyright (C) 2001 Altera Corporation |
|
* hacked for non-paged-MM by Hyok S. Choi, 2003. |
|
* |
|
* These are the low level assembler for performing cache and TLB |
|
* functions on the arm922. |
|
* |
|
* CONFIG_CPU_ARM922_CPU_IDLE -> nohlt |
|
*/ |
|
#include <linux/linkage.h> |
|
#include <linux/init.h> |
|
#include <linux/pgtable.h> |
|
#include <asm/assembler.h> |
|
#include <asm/hwcap.h> |
|
#include <asm/pgtable-hwdef.h> |
|
#include <asm/page.h> |
|
#include <asm/ptrace.h> |
|
#include "proc-macros.S" |
|
|
|
/* |
|
* The size of one data cache line. |
|
*/ |
|
#define CACHE_DLINESIZE 32 |
|
|
|
/* |
|
* The number of data cache segments. |
|
*/ |
|
#define CACHE_DSEGMENTS 4 |
|
|
|
/* |
|
* The number of lines in a cache segment. |
|
*/ |
|
#define CACHE_DENTRIES 64 |
|
|
|
/* |
|
* This is the size at which it becomes more efficient to |
|
* clean the whole cache, rather than using the individual |
|
* cache line maintenance instructions. (I think this should |
|
* be 32768). |
|
*/ |
|
#define CACHE_DLIMIT 8192 |
|
|
|
|
|
.text |
|
/* |
|
* cpu_arm922_proc_init() |
|
*/ |
|
ENTRY(cpu_arm922_proc_init) |
|
ret lr |
|
|
|
/* |
|
* cpu_arm922_proc_fin() |
|
*/ |
|
ENTRY(cpu_arm922_proc_fin) |
|
mrc p15, 0, r0, c1, c0, 0 @ ctrl register |
|
bic r0, r0, #0x1000 @ ...i............ |
|
bic r0, r0, #0x000e @ ............wca. |
|
mcr p15, 0, r0, c1, c0, 0 @ disable caches |
|
ret lr |
|
|
|
/* |
|
* cpu_arm922_reset(loc) |
|
* |
|
* Perform a soft reset of the system. Put the CPU into the |
|
* same state as it would be if it had been reset, and branch |
|
* to what would be the reset vector. |
|
* |
|
* loc: location to jump to for soft reset |
|
*/ |
|
.align 5 |
|
.pushsection .idmap.text, "ax" |
|
ENTRY(cpu_arm922_reset) |
|
mov ip, #0 |
|
mcr p15, 0, ip, c7, c7, 0 @ invalidate I,D caches |
|
mcr p15, 0, ip, c7, c10, 4 @ drain WB |
|
#ifdef CONFIG_MMU |
|
mcr p15, 0, ip, c8, c7, 0 @ invalidate I & D TLBs |
|
#endif |
|
mrc p15, 0, ip, c1, c0, 0 @ ctrl register |
|
bic ip, ip, #0x000f @ ............wcam |
|
bic ip, ip, #0x1100 @ ...i...s........ |
|
mcr p15, 0, ip, c1, c0, 0 @ ctrl register |
|
ret r0 |
|
ENDPROC(cpu_arm922_reset) |
|
.popsection |
|
|
|
/* |
|
* cpu_arm922_do_idle() |
|
*/ |
|
.align 5 |
|
ENTRY(cpu_arm922_do_idle) |
|
mcr p15, 0, r0, c7, c0, 4 @ Wait for interrupt |
|
ret lr |
|
|
|
|
|
#ifndef CONFIG_CPU_DCACHE_WRITETHROUGH |
|
|
|
/* |
|
* flush_icache_all() |
|
* |
|
* Unconditionally clean and invalidate the entire icache. |
|
*/ |
|
ENTRY(arm922_flush_icache_all) |
|
mov r0, #0 |
|
mcr p15, 0, r0, c7, c5, 0 @ invalidate I cache |
|
ret lr |
|
ENDPROC(arm922_flush_icache_all) |
|
|
|
/* |
|
* flush_user_cache_all() |
|
* |
|
* Clean and invalidate all cache entries in a particular |
|
* address space. |
|
*/ |
|
ENTRY(arm922_flush_user_cache_all) |
|
/* FALLTHROUGH */ |
|
|
|
/* |
|
* flush_kern_cache_all() |
|
* |
|
* Clean and invalidate the entire cache. |
|
*/ |
|
ENTRY(arm922_flush_kern_cache_all) |
|
mov r2, #VM_EXEC |
|
mov ip, #0 |
|
__flush_whole_cache: |
|
mov r1, #(CACHE_DSEGMENTS - 1) << 5 @ 8 segments |
|
1: orr r3, r1, #(CACHE_DENTRIES - 1) << 26 @ 64 entries |
|
2: mcr p15, 0, r3, c7, c14, 2 @ clean+invalidate D index |
|
subs r3, r3, #1 << 26 |
|
bcs 2b @ entries 63 to 0 |
|
subs r1, r1, #1 << 5 |
|
bcs 1b @ segments 7 to 0 |
|
tst r2, #VM_EXEC |
|
mcrne p15, 0, ip, c7, c5, 0 @ invalidate I cache |
|
mcrne p15, 0, ip, c7, c10, 4 @ drain WB |
|
ret lr |
|
|
|
/* |
|
* flush_user_cache_range(start, end, flags) |
|
* |
|
* Clean and invalidate a range of cache entries in the |
|
* specified address range. |
|
* |
|
* - start - start address (inclusive) |
|
* - end - end address (exclusive) |
|
* - flags - vm_flags describing address space |
|
*/ |
|
ENTRY(arm922_flush_user_cache_range) |
|
mov ip, #0 |
|
sub r3, r1, r0 @ calculate total size |
|
cmp r3, #CACHE_DLIMIT |
|
bhs __flush_whole_cache |
|
|
|
1: mcr p15, 0, r0, c7, c14, 1 @ clean+invalidate D entry |
|
tst r2, #VM_EXEC |
|
mcrne p15, 0, r0, c7, c5, 1 @ invalidate I entry |
|
add r0, r0, #CACHE_DLINESIZE |
|
cmp r0, r1 |
|
blo 1b |
|
tst r2, #VM_EXEC |
|
mcrne p15, 0, ip, c7, c10, 4 @ drain WB |
|
ret lr |
|
|
|
/* |
|
* coherent_kern_range(start, end) |
|
* |
|
* Ensure coherency between the Icache and the Dcache in the |
|
* region described by start, end. If you have non-snooping |
|
* Harvard caches, you need to implement this function. |
|
* |
|
* - start - virtual start address |
|
* - end - virtual end address |
|
*/ |
|
ENTRY(arm922_coherent_kern_range) |
|
/* FALLTHROUGH */ |
|
|
|
/* |
|
* coherent_user_range(start, end) |
|
* |
|
* Ensure coherency between the Icache and the Dcache in the |
|
* region described by start, end. If you have non-snooping |
|
* Harvard caches, you need to implement this function. |
|
* |
|
* - start - virtual start address |
|
* - end - virtual end address |
|
*/ |
|
ENTRY(arm922_coherent_user_range) |
|
bic r0, r0, #CACHE_DLINESIZE - 1 |
|
1: mcr p15, 0, r0, c7, c10, 1 @ clean D entry |
|
mcr p15, 0, r0, c7, c5, 1 @ invalidate I entry |
|
add r0, r0, #CACHE_DLINESIZE |
|
cmp r0, r1 |
|
blo 1b |
|
mcr p15, 0, r0, c7, c10, 4 @ drain WB |
|
mov r0, #0 |
|
ret lr |
|
|
|
/* |
|
* flush_kern_dcache_area(void *addr, size_t size) |
|
* |
|
* Ensure no D cache aliasing occurs, either with itself or |
|
* the I cache |
|
* |
|
* - addr - kernel address |
|
* - size - region size |
|
*/ |
|
ENTRY(arm922_flush_kern_dcache_area) |
|
add r1, r0, r1 |
|
1: mcr p15, 0, r0, c7, c14, 1 @ clean+invalidate D entry |
|
add r0, r0, #CACHE_DLINESIZE |
|
cmp r0, r1 |
|
blo 1b |
|
mov r0, #0 |
|
mcr p15, 0, r0, c7, c5, 0 @ invalidate I cache |
|
mcr p15, 0, r0, c7, c10, 4 @ drain WB |
|
ret lr |
|
|
|
/* |
|
* dma_inv_range(start, end) |
|
* |
|
* Invalidate (discard) the specified virtual address range. |
|
* May not write back any entries. If 'start' or 'end' |
|
* are not cache line aligned, those lines must be written |
|
* back. |
|
* |
|
* - start - virtual start address |
|
* - end - virtual end address |
|
* |
|
* (same as v4wb) |
|
*/ |
|
arm922_dma_inv_range: |
|
tst r0, #CACHE_DLINESIZE - 1 |
|
bic r0, r0, #CACHE_DLINESIZE - 1 |
|
mcrne p15, 0, r0, c7, c10, 1 @ clean D entry |
|
tst r1, #CACHE_DLINESIZE - 1 |
|
mcrne p15, 0, r1, c7, c10, 1 @ clean D entry |
|
1: mcr p15, 0, r0, c7, c6, 1 @ invalidate D entry |
|
add r0, r0, #CACHE_DLINESIZE |
|
cmp r0, r1 |
|
blo 1b |
|
mcr p15, 0, r0, c7, c10, 4 @ drain WB |
|
ret lr |
|
|
|
/* |
|
* dma_clean_range(start, end) |
|
* |
|
* Clean the specified virtual address range. |
|
* |
|
* - start - virtual start address |
|
* - end - virtual end address |
|
* |
|
* (same as v4wb) |
|
*/ |
|
arm922_dma_clean_range: |
|
bic r0, r0, #CACHE_DLINESIZE - 1 |
|
1: mcr p15, 0, r0, c7, c10, 1 @ clean D entry |
|
add r0, r0, #CACHE_DLINESIZE |
|
cmp r0, r1 |
|
blo 1b |
|
mcr p15, 0, r0, c7, c10, 4 @ drain WB |
|
ret lr |
|
|
|
/* |
|
* dma_flush_range(start, end) |
|
* |
|
* Clean and invalidate the specified virtual address range. |
|
* |
|
* - start - virtual start address |
|
* - end - virtual end address |
|
*/ |
|
ENTRY(arm922_dma_flush_range) |
|
bic r0, r0, #CACHE_DLINESIZE - 1 |
|
1: mcr p15, 0, r0, c7, c14, 1 @ clean+invalidate D entry |
|
add r0, r0, #CACHE_DLINESIZE |
|
cmp r0, r1 |
|
blo 1b |
|
mcr p15, 0, r0, c7, c10, 4 @ drain WB |
|
ret lr |
|
|
|
/* |
|
* dma_map_area(start, size, dir) |
|
* - start - kernel virtual start address |
|
* - size - size of region |
|
* - dir - DMA direction |
|
*/ |
|
ENTRY(arm922_dma_map_area) |
|
add r1, r1, r0 |
|
cmp r2, #DMA_TO_DEVICE |
|
beq arm922_dma_clean_range |
|
bcs arm922_dma_inv_range |
|
b arm922_dma_flush_range |
|
ENDPROC(arm922_dma_map_area) |
|
|
|
/* |
|
* dma_unmap_area(start, size, dir) |
|
* - start - kernel virtual start address |
|
* - size - size of region |
|
* - dir - DMA direction |
|
*/ |
|
ENTRY(arm922_dma_unmap_area) |
|
ret lr |
|
ENDPROC(arm922_dma_unmap_area) |
|
|
|
.globl arm922_flush_kern_cache_louis |
|
.equ arm922_flush_kern_cache_louis, arm922_flush_kern_cache_all |
|
|
|
@ define struct cpu_cache_fns (see <asm/cacheflush.h> and proc-macros.S) |
|
define_cache_functions arm922 |
|
#endif |
|
|
|
|
|
ENTRY(cpu_arm922_dcache_clean_area) |
|
#ifndef CONFIG_CPU_DCACHE_WRITETHROUGH |
|
1: mcr p15, 0, r0, c7, c10, 1 @ clean D entry |
|
add r0, r0, #CACHE_DLINESIZE |
|
subs r1, r1, #CACHE_DLINESIZE |
|
bhi 1b |
|
#endif |
|
ret lr |
|
|
|
/* =============================== PageTable ============================== */ |
|
|
|
/* |
|
* cpu_arm922_switch_mm(pgd) |
|
* |
|
* Set the translation base pointer to be as described by pgd. |
|
* |
|
* pgd: new page tables |
|
*/ |
|
.align 5 |
|
ENTRY(cpu_arm922_switch_mm) |
|
#ifdef CONFIG_MMU |
|
mov ip, #0 |
|
#ifdef CONFIG_CPU_DCACHE_WRITETHROUGH |
|
mcr p15, 0, ip, c7, c6, 0 @ invalidate D cache |
|
#else |
|
@ && 'Clean & Invalidate whole DCache' |
|
@ && Re-written to use Index Ops. |
|
@ && Uses registers r1, r3 and ip |
|
|
|
mov r1, #(CACHE_DSEGMENTS - 1) << 5 @ 4 segments |
|
1: orr r3, r1, #(CACHE_DENTRIES - 1) << 26 @ 64 entries |
|
2: mcr p15, 0, r3, c7, c14, 2 @ clean & invalidate D index |
|
subs r3, r3, #1 << 26 |
|
bcs 2b @ entries 63 to 0 |
|
subs r1, r1, #1 << 5 |
|
bcs 1b @ segments 7 to 0 |
|
#endif |
|
mcr p15, 0, ip, c7, c5, 0 @ invalidate I cache |
|
mcr p15, 0, ip, c7, c10, 4 @ drain WB |
|
mcr p15, 0, r0, c2, c0, 0 @ load page table pointer |
|
mcr p15, 0, ip, c8, c7, 0 @ invalidate I & D TLBs |
|
#endif |
|
ret lr |
|
|
|
/* |
|
* cpu_arm922_set_pte_ext(ptep, pte, ext) |
|
* |
|
* Set a PTE and flush it out |
|
*/ |
|
.align 5 |
|
ENTRY(cpu_arm922_set_pte_ext) |
|
#ifdef CONFIG_MMU |
|
armv3_set_pte_ext |
|
mov r0, r0 |
|
mcr p15, 0, r0, c7, c10, 1 @ clean D entry |
|
mcr p15, 0, r0, c7, c10, 4 @ drain WB |
|
#endif /* CONFIG_MMU */ |
|
ret lr |
|
|
|
.type __arm922_setup, #function |
|
__arm922_setup: |
|
mov r0, #0 |
|
mcr p15, 0, r0, c7, c7 @ invalidate I,D caches on v4 |
|
mcr p15, 0, r0, c7, c10, 4 @ drain write buffer on v4 |
|
#ifdef CONFIG_MMU |
|
mcr p15, 0, r0, c8, c7 @ invalidate I,D TLBs on v4 |
|
#endif |
|
adr r5, arm922_crval |
|
ldmia r5, {r5, r6} |
|
mrc p15, 0, r0, c1, c0 @ get control register v4 |
|
bic r0, r0, r5 |
|
orr r0, r0, r6 |
|
ret lr |
|
.size __arm922_setup, . - __arm922_setup |
|
|
|
/* |
|
* R |
|
* .RVI ZFRS BLDP WCAM |
|
* ..11 0001 ..11 0101 |
|
* |
|
*/ |
|
.type arm922_crval, #object |
|
arm922_crval: |
|
crval clear=0x00003f3f, mmuset=0x00003135, ucset=0x00001130 |
|
|
|
__INITDATA |
|
@ define struct processor (see <asm/proc-fns.h> and proc-macros.S) |
|
define_processor_functions arm922, dabort=v4t_early_abort, pabort=legacy_pabort |
|
|
|
.section ".rodata" |
|
|
|
string cpu_arch_name, "armv4t" |
|
string cpu_elf_name, "v4" |
|
string cpu_arm922_name, "ARM922T" |
|
|
|
.align |
|
|
|
.section ".proc.info.init", "a" |
|
|
|
.type __arm922_proc_info,#object |
|
__arm922_proc_info: |
|
.long 0x41009220 |
|
.long 0xff00fff0 |
|
.long PMD_TYPE_SECT | \ |
|
PMD_SECT_BUFFERABLE | \ |
|
PMD_SECT_CACHEABLE | \ |
|
PMD_BIT4 | \ |
|
PMD_SECT_AP_WRITE | \ |
|
PMD_SECT_AP_READ |
|
.long PMD_TYPE_SECT | \ |
|
PMD_BIT4 | \ |
|
PMD_SECT_AP_WRITE | \ |
|
PMD_SECT_AP_READ |
|
initfn __arm922_setup, __arm922_proc_info |
|
.long cpu_arch_name |
|
.long cpu_elf_name |
|
.long HWCAP_SWP | HWCAP_HALF | HWCAP_THUMB |
|
.long cpu_arm922_name |
|
.long arm922_processor_functions |
|
.long v4wbi_tlb_fns |
|
.long v4wb_user_fns |
|
#ifndef CONFIG_CPU_DCACHE_WRITETHROUGH |
|
.long arm922_cache_fns |
|
#else |
|
.long v4wt_cache_fns |
|
#endif |
|
.size __arm922_proc_info, . - __arm922_proc_info
|
|
|