forked from Qortal/Brooklyn
You can not select more than 25 topics
Topics must start with a letter or number, can include dashes ('-') and can be up to 35 characters long.
78 lines
2.4 KiB
78 lines
2.4 KiB
/* SPDX-License-Identifier: GPL-2.0 */ |
|
#define SUSBCRequest_SetBaudRateParityAndStopBits 1 |
|
#define SUSBCR_SBR_MASK 0xFF00 |
|
#define SUSBCR_SBR_1200 0x0100 |
|
#define SUSBCR_SBR_9600 0x0200 |
|
#define SUSBCR_SBR_19200 0x0400 |
|
#define SUSBCR_SBR_28800 0x0800 |
|
#define SUSBCR_SBR_38400 0x1000 |
|
#define SUSBCR_SBR_57600 0x2000 |
|
#define SUSBCR_SBR_115200 0x4000 |
|
|
|
#define SUSBCR_SPASB_MASK 0x0070 |
|
#define SUSBCR_SPASB_NoParity 0x0010 |
|
#define SUSBCR_SPASB_OddParity 0x0020 |
|
#define SUSBCR_SPASB_EvenParity 0x0040 |
|
|
|
#define SUSBCR_SPASB_STPMASK 0x0003 |
|
#define SUSBCR_SPASB_1StopBit 0x0001 |
|
#define SUSBCR_SPASB_2StopBits 0x0002 |
|
|
|
#define SUSBCRequest_SetStatusLinesOrQueues 2 |
|
#define SUSBCR_SSL_SETRTS 0x0001 |
|
#define SUSBCR_SSL_CLRRTS 0x0002 |
|
#define SUSBCR_SSL_SETDTR 0x0004 |
|
#define SUSBCR_SSL_CLRDTR 0x0010 |
|
|
|
/* Kill the pending/current writes to the comm port. */ |
|
#define SUSBCR_SSL_PURGE_TXABORT 0x0100 |
|
/* Kill the pending/current reads to the comm port. */ |
|
#define SUSBCR_SSL_PURGE_RXABORT 0x0200 |
|
/* Kill the transmit queue if there. */ |
|
#define SUSBCR_SSL_PURGE_TXCLEAR 0x0400 |
|
/* Kill the typeahead buffer if there. */ |
|
#define SUSBCR_SSL_PURGE_RXCLEAR 0x0800 |
|
|
|
#define SUSBCRequest_GetStatusLineState 4 |
|
/* Any Character received */ |
|
#define SUSBCR_GSL_RXCHAR 0x0001 |
|
/* Transmitt Queue Empty */ |
|
#define SUSBCR_GSL_TXEMPTY 0x0004 |
|
/* CTS changed state */ |
|
#define SUSBCR_GSL_CTS 0x0008 |
|
/* DSR changed state */ |
|
#define SUSBCR_GSL_DSR 0x0010 |
|
/* RLSD changed state */ |
|
#define SUSBCR_GSL_RLSD 0x0020 |
|
/* BREAK received */ |
|
#define SUSBCR_GSL_BREAK 0x0040 |
|
/* Line status error occurred */ |
|
#define SUSBCR_GSL_ERR 0x0080 |
|
/* Ring signal detected */ |
|
#define SUSBCR_GSL_RING 0x0100 |
|
|
|
#define SUSBCRequest_Misc 8 |
|
/* use a predefined reset sequence */ |
|
#define SUSBCR_MSC_ResetReader 0x0001 |
|
/* use a predefined sequence to reset the internal queues */ |
|
#define SUSBCR_MSC_ResetAllQueues 0x0002 |
|
|
|
#define SUSBCRequest_GetMisc 0x10 |
|
|
|
/* |
|
* get the firmware version from device, coded like this 0xHHLLBBPP with |
|
* HH = Firmware Version High Byte |
|
* LL = Firmware Version Low Byte |
|
* BB = Build Number |
|
* PP = Further Attributes |
|
*/ |
|
#define SUSBCR_MSC_GetFWVersion 0x0001 |
|
|
|
/* |
|
* get the hardware version from device coded like this 0xHHLLPPRR with |
|
* HH = Software Version High Byte |
|
* LL = Software Version Low Byte |
|
* PP = Further Attributes |
|
* RR = Reserved for the hardware ID |
|
*/ |
|
#define SUSBCR_MSC_GetHWVersion 0x0002
|
|
|