forked from Qortal/Brooklyn
You can not select more than 25 topics
Topics must start with a letter or number, can include dashes ('-') and can be up to 35 characters long.
114 lines
5.1 KiB
114 lines
5.1 KiB
/* SPDX-License-Identifier: GPL-2.0 */ |
|
|
|
#define FDOMAIN_REGION_SIZE 0x10 |
|
#define FDOMAIN_BIOS_SIZE 0x2000 |
|
|
|
enum { |
|
in_arbitration = 0x02, |
|
in_selection = 0x04, |
|
in_other = 0x08, |
|
disconnect = 0x10, |
|
aborted = 0x20, |
|
sent_ident = 0x40, |
|
}; |
|
|
|
/* (@) = not present on TMC1800, (#) = not present on TMC1800 and TMC18C50 */ |
|
#define REG_SCSI_DATA 0 /* R/W: SCSI Data (with ACK) */ |
|
#define REG_BSTAT 1 /* R: SCSI Bus Status */ |
|
#define BSTAT_BSY BIT(0) /* Busy */ |
|
#define BSTAT_MSG BIT(1) /* Message */ |
|
#define BSTAT_IO BIT(2) /* Input/Output */ |
|
#define BSTAT_CMD BIT(3) /* Command/Data */ |
|
#define BSTAT_REQ BIT(4) /* Request and Not Ack */ |
|
#define BSTAT_SEL BIT(5) /* Select */ |
|
#define BSTAT_ACK BIT(6) /* Acknowledge and Request */ |
|
#define BSTAT_ATN BIT(7) /* Attention */ |
|
#define REG_BCTL 1 /* W: SCSI Bus Control */ |
|
#define BCTL_RST BIT(0) /* Bus Reset */ |
|
#define BCTL_SEL BIT(1) /* Select */ |
|
#define BCTL_BSY BIT(2) /* Busy */ |
|
#define BCTL_ATN BIT(3) /* Attention */ |
|
#define BCTL_IO BIT(4) /* Input/Output */ |
|
#define BCTL_CMD BIT(5) /* Command/Data */ |
|
#define BCTL_MSG BIT(6) /* Message */ |
|
#define BCTL_BUSEN BIT(7) /* Enable bus drivers */ |
|
#define REG_ASTAT 2 /* R: Adapter Status 1 */ |
|
#define ASTAT_IRQ BIT(0) /* Interrupt active */ |
|
#define ASTAT_ARB BIT(1) /* Arbitration complete */ |
|
#define ASTAT_PARERR BIT(2) /* Parity error */ |
|
#define ASTAT_RST BIT(3) /* SCSI reset occurred */ |
|
#define ASTAT_FIFODIR BIT(4) /* FIFO direction */ |
|
#define ASTAT_FIFOEN BIT(5) /* FIFO enabled */ |
|
#define ASTAT_PAREN BIT(6) /* Parity enabled */ |
|
#define ASTAT_BUSEN BIT(7) /* Bus drivers enabled */ |
|
#define REG_ICTL 2 /* W: Interrupt Control */ |
|
#define ICTL_FIFO_MASK 0x0f /* FIFO threshold, 1/16 FIFO size */ |
|
#define ICTL_FIFO BIT(4) /* Int. on FIFO count */ |
|
#define ICTL_ARB BIT(5) /* Int. on Arbitration complete */ |
|
#define ICTL_SEL BIT(6) /* Int. on SCSI Select */ |
|
#define ICTL_REQ BIT(7) /* Int. on SCSI Request */ |
|
#define REG_FSTAT 3 /* R: Adapter Status 2 (FIFO) - (@) */ |
|
#define FSTAT_ONOTEMPTY BIT(0) /* Output FIFO not empty */ |
|
#define FSTAT_INOTEMPTY BIT(1) /* Input FIFO not empty */ |
|
#define FSTAT_NOTEMPTY BIT(2) /* Main FIFO not empty */ |
|
#define FSTAT_NOTFULL BIT(3) /* Main FIFO not full */ |
|
#define REG_MCTL 3 /* W: SCSI Data Mode Control */ |
|
#define MCTL_ACK_MASK 0x0f /* Acknowledge period */ |
|
#define MCTL_ACTDEASS BIT(4) /* Active deassert of REQ and ACK */ |
|
#define MCTL_TARGET BIT(5) /* Enable target mode */ |
|
#define MCTL_FASTSYNC BIT(6) /* Enable Fast Synchronous */ |
|
#define MCTL_SYNC BIT(7) /* Enable Synchronous */ |
|
#define REG_INTCOND 4 /* R: Interrupt Condition - (@) */ |
|
#define IRQ_FIFO BIT(1) /* FIFO interrupt */ |
|
#define IRQ_REQ BIT(2) /* SCSI Request interrupt */ |
|
#define IRQ_SEL BIT(3) /* SCSI Select interrupt */ |
|
#define IRQ_ARB BIT(4) /* SCSI Arbitration interrupt */ |
|
#define IRQ_RST BIT(5) /* SCSI Reset interrupt */ |
|
#define IRQ_FORCED BIT(6) /* Forced interrupt */ |
|
#define IRQ_TIMEOUT BIT(7) /* Bus timeout */ |
|
#define REG_ACTL 4 /* W: Adapter Control 1 */ |
|
#define ACTL_RESET BIT(0) /* Reset FIFO, parity, reset int. */ |
|
#define ACTL_FIRQ BIT(1) /* Set Forced interrupt */ |
|
#define ACTL_ARB BIT(2) /* Initiate Bus Arbitration */ |
|
#define ACTL_PAREN BIT(3) /* Enable SCSI Parity */ |
|
#define ACTL_IRQEN BIT(4) /* Enable interrupts */ |
|
#define ACTL_CLRFIRQ BIT(5) /* Clear Forced interrupt */ |
|
#define ACTL_FIFOWR BIT(6) /* FIFO Direction (1=write) */ |
|
#define ACTL_FIFOEN BIT(7) /* Enable FIFO */ |
|
#define REG_ID_LSB 5 /* R: ID Code (LSB) */ |
|
#define REG_ACTL2 5 /* Adapter Control 2 - (@) */ |
|
#define ACTL2_RAMOVRLY BIT(0) /* Enable RAM overlay */ |
|
#define ACTL2_SLEEP BIT(7) /* Sleep mode */ |
|
#define REG_ID_MSB 6 /* R: ID Code (MSB) */ |
|
#define REG_LOOPBACK 7 /* R/W: Loopback */ |
|
#define REG_SCSI_DATA_NOACK 8 /* R/W: SCSI Data (no ACK) */ |
|
#define REG_ASTAT3 9 /* R: Adapter Status 3 */ |
|
#define ASTAT3_ACTDEASS BIT(0) /* Active deassert enabled */ |
|
#define ASTAT3_RAMOVRLY BIT(1) /* RAM overlay enabled */ |
|
#define ASTAT3_TARGERR BIT(2) /* Target error */ |
|
#define ASTAT3_IRQEN BIT(3) /* Interrupts enabled */ |
|
#define ASTAT3_IRQMASK 0xf0 /* Enabled interrupts mask */ |
|
#define REG_CFG1 10 /* R: Configuration Register 1 */ |
|
#define CFG1_BUS BIT(0) /* 0 = ISA */ |
|
#define CFG1_IRQ_MASK 0x0e /* IRQ jumpers */ |
|
#define CFG1_IO_MASK 0x30 /* I/O base jumpers */ |
|
#define CFG1_BIOS_MASK 0xc0 /* BIOS base jumpers */ |
|
#define REG_CFG2 11 /* R/W: Configuration Register 2 (@) */ |
|
#define CFG2_ROMDIS BIT(0) /* ROM disabled */ |
|
#define CFG2_RAMDIS BIT(1) /* RAM disabled */ |
|
#define CFG2_IRQEDGE BIT(2) /* Edge-triggered interrupts */ |
|
#define CFG2_NOWS BIT(3) /* No wait states */ |
|
#define CFG2_32BIT BIT(7) /* 32-bit mode */ |
|
#define REG_FIFO 12 /* R/W: FIFO */ |
|
#define REG_FIFO_COUNT 14 /* R: FIFO Data Count */ |
|
|
|
#ifdef CONFIG_PM_SLEEP |
|
static const struct dev_pm_ops __maybe_unused fdomain_pm_ops; |
|
#define FDOMAIN_PM_OPS (&fdomain_pm_ops) |
|
#else |
|
#define FDOMAIN_PM_OPS NULL |
|
#endif /* CONFIG_PM_SLEEP */ |
|
|
|
struct Scsi_Host *fdomain_create(int base, int irq, int this_id, |
|
struct device *dev); |
|
int fdomain_destroy(struct Scsi_Host *sh);
|
|
|