forked from Qortal/Brooklyn
You can not select more than 25 topics
Topics must start with a letter or number, can include dashes ('-') and can be up to 35 characters long.
1975 lines
56 KiB
1975 lines
56 KiB
// SPDX-License-Identifier: GPL-2.0-or-later |
|
/* |
|
* |
|
* (c) 2004 Gerd Knorr <[email protected]> [SuSE Labs] |
|
* |
|
* Extended 3 / 2005 by Hartmut Hackmann to support various |
|
* cards with the tda10046 DVB-T channel decoder |
|
*/ |
|
|
|
#include "saa7134.h" |
|
#include "saa7134-reg.h" |
|
|
|
#include <linux/init.h> |
|
#include <linux/list.h> |
|
#include <linux/module.h> |
|
#include <linux/kernel.h> |
|
#include <linux/delay.h> |
|
#include <linux/kthread.h> |
|
#include <linux/suspend.h> |
|
|
|
#include <media/v4l2-common.h> |
|
#include "dvb-pll.h" |
|
#include <media/dvb_frontend.h> |
|
|
|
#include "mt352.h" |
|
#include "mt352_priv.h" /* FIXME */ |
|
#include "tda1004x.h" |
|
#include "nxt200x.h" |
|
#include "tuner-xc2028.h" |
|
#include "xc5000.h" |
|
|
|
#include "tda10086.h" |
|
#include "tda826x.h" |
|
#include "tda827x.h" |
|
#include "isl6421.h" |
|
#include "isl6405.h" |
|
#include "lnbp21.h" |
|
#include "tuner-simple.h" |
|
#include "tda10048.h" |
|
#include "tda18271.h" |
|
#include "lgdt3305.h" |
|
#include "tda8290.h" |
|
#include "mb86a20s.h" |
|
#include "lgs8gxx.h" |
|
|
|
#include "zl10353.h" |
|
#include "qt1010.h" |
|
|
|
#include "zl10036.h" |
|
#include "zl10039.h" |
|
#include "mt312.h" |
|
#include "s5h1411.h" |
|
|
|
MODULE_AUTHOR("Gerd Knorr <[email protected]> [SuSE Labs]"); |
|
MODULE_LICENSE("GPL"); |
|
|
|
static unsigned int antenna_pwr; |
|
|
|
module_param(antenna_pwr, int, 0444); |
|
MODULE_PARM_DESC(antenna_pwr,"enable antenna power (Pinnacle 300i)"); |
|
|
|
static int use_frontend; |
|
module_param(use_frontend, int, 0644); |
|
MODULE_PARM_DESC(use_frontend,"for cards with multiple frontends (0: terrestrial, 1: satellite)"); |
|
|
|
DVB_DEFINE_MOD_OPT_ADAPTER_NR(adapter_nr); |
|
|
|
/* ------------------------------------------------------------------ |
|
* mt352 based DVB-T cards |
|
*/ |
|
|
|
static int pinnacle_antenna_pwr(struct saa7134_dev *dev, int on) |
|
{ |
|
u32 ok; |
|
|
|
if (!on) { |
|
saa_setl(SAA7134_GPIO_GPMODE0 >> 2, (1 << 26)); |
|
saa_clearl(SAA7134_GPIO_GPSTATUS0 >> 2, (1 << 26)); |
|
return 0; |
|
} |
|
|
|
saa_setl(SAA7134_GPIO_GPMODE0 >> 2, (1 << 26)); |
|
saa_setl(SAA7134_GPIO_GPSTATUS0 >> 2, (1 << 26)); |
|
udelay(10); |
|
|
|
saa_setl(SAA7134_GPIO_GPMODE0 >> 2, (1 << 28)); |
|
saa_clearl(SAA7134_GPIO_GPSTATUS0 >> 2, (1 << 28)); |
|
udelay(10); |
|
saa_setl(SAA7134_GPIO_GPSTATUS0 >> 2, (1 << 28)); |
|
udelay(10); |
|
ok = saa_readl(SAA7134_GPIO_GPSTATUS0) & (1 << 27); |
|
pr_debug("%s %s\n", __func__, ok ? "on" : "off"); |
|
|
|
if (!ok) |
|
saa_clearl(SAA7134_GPIO_GPSTATUS0 >> 2, (1 << 26)); |
|
return ok; |
|
} |
|
|
|
static int mt352_pinnacle_init(struct dvb_frontend* fe) |
|
{ |
|
static u8 clock_config [] = { CLOCK_CTL, 0x3d, 0x28 }; |
|
static u8 reset [] = { RESET, 0x80 }; |
|
static u8 adc_ctl_1_cfg [] = { ADC_CTL_1, 0x40 }; |
|
static u8 agc_cfg [] = { AGC_TARGET, 0x28, 0xa0 }; |
|
static u8 capt_range_cfg[] = { CAPT_RANGE, 0x31 }; |
|
static u8 fsm_ctl_cfg[] = { 0x7b, 0x04 }; |
|
static u8 gpp_ctl_cfg [] = { GPP_CTL, 0x0f }; |
|
static u8 scan_ctl_cfg [] = { SCAN_CTL, 0x0d }; |
|
static u8 irq_cfg [] = { INTERRUPT_EN_0, 0x00, 0x00, 0x00, 0x00 }; |
|
|
|
pr_debug("%s called\n", __func__); |
|
|
|
mt352_write(fe, clock_config, sizeof(clock_config)); |
|
udelay(200); |
|
mt352_write(fe, reset, sizeof(reset)); |
|
mt352_write(fe, adc_ctl_1_cfg, sizeof(adc_ctl_1_cfg)); |
|
mt352_write(fe, agc_cfg, sizeof(agc_cfg)); |
|
mt352_write(fe, capt_range_cfg, sizeof(capt_range_cfg)); |
|
mt352_write(fe, gpp_ctl_cfg, sizeof(gpp_ctl_cfg)); |
|
|
|
mt352_write(fe, fsm_ctl_cfg, sizeof(fsm_ctl_cfg)); |
|
mt352_write(fe, scan_ctl_cfg, sizeof(scan_ctl_cfg)); |
|
mt352_write(fe, irq_cfg, sizeof(irq_cfg)); |
|
|
|
return 0; |
|
} |
|
|
|
static int mt352_aver777_init(struct dvb_frontend* fe) |
|
{ |
|
static u8 clock_config [] = { CLOCK_CTL, 0x38, 0x2d }; |
|
static u8 reset [] = { RESET, 0x80 }; |
|
static u8 adc_ctl_1_cfg [] = { ADC_CTL_1, 0x40 }; |
|
static u8 agc_cfg [] = { AGC_TARGET, 0x28, 0xa0 }; |
|
static u8 capt_range_cfg[] = { CAPT_RANGE, 0x33 }; |
|
|
|
mt352_write(fe, clock_config, sizeof(clock_config)); |
|
udelay(200); |
|
mt352_write(fe, reset, sizeof(reset)); |
|
mt352_write(fe, adc_ctl_1_cfg, sizeof(adc_ctl_1_cfg)); |
|
mt352_write(fe, agc_cfg, sizeof(agc_cfg)); |
|
mt352_write(fe, capt_range_cfg, sizeof(capt_range_cfg)); |
|
|
|
return 0; |
|
} |
|
|
|
static int mt352_avermedia_xc3028_init(struct dvb_frontend *fe) |
|
{ |
|
static u8 clock_config [] = { CLOCK_CTL, 0x38, 0x2d }; |
|
static u8 reset [] = { RESET, 0x80 }; |
|
static u8 adc_ctl_1_cfg [] = { ADC_CTL_1, 0x40 }; |
|
static u8 agc_cfg [] = { AGC_TARGET, 0xe }; |
|
static u8 capt_range_cfg[] = { CAPT_RANGE, 0x33 }; |
|
|
|
mt352_write(fe, clock_config, sizeof(clock_config)); |
|
udelay(200); |
|
mt352_write(fe, reset, sizeof(reset)); |
|
mt352_write(fe, adc_ctl_1_cfg, sizeof(adc_ctl_1_cfg)); |
|
mt352_write(fe, agc_cfg, sizeof(agc_cfg)); |
|
mt352_write(fe, capt_range_cfg, sizeof(capt_range_cfg)); |
|
return 0; |
|
} |
|
|
|
static int mt352_pinnacle_tuner_set_params(struct dvb_frontend *fe) |
|
{ |
|
struct dtv_frontend_properties *c = &fe->dtv_property_cache; |
|
u8 off[] = { 0x00, 0xf1}; |
|
u8 on[] = { 0x00, 0x71}; |
|
struct i2c_msg msg = {.addr=0x43, .flags=0, .buf=off, .len = sizeof(off)}; |
|
|
|
struct saa7134_dev *dev = fe->dvb->priv; |
|
struct v4l2_frequency f; |
|
|
|
/* set frequency (mt2050) */ |
|
f.tuner = 0; |
|
f.type = V4L2_TUNER_DIGITAL_TV; |
|
f.frequency = c->frequency / 1000 * 16 / 1000; |
|
if (fe->ops.i2c_gate_ctrl) |
|
fe->ops.i2c_gate_ctrl(fe, 1); |
|
i2c_transfer(&dev->i2c_adap, &msg, 1); |
|
saa_call_all(dev, tuner, s_frequency, &f); |
|
msg.buf = on; |
|
if (fe->ops.i2c_gate_ctrl) |
|
fe->ops.i2c_gate_ctrl(fe, 1); |
|
i2c_transfer(&dev->i2c_adap, &msg, 1); |
|
|
|
pinnacle_antenna_pwr(dev, antenna_pwr); |
|
|
|
/* mt352 setup */ |
|
return mt352_pinnacle_init(fe); |
|
} |
|
|
|
static struct mt352_config pinnacle_300i = { |
|
.demod_address = 0x3c >> 1, |
|
.adc_clock = 20333, |
|
.if2 = 36150, |
|
.no_tuner = 1, |
|
.demod_init = mt352_pinnacle_init, |
|
}; |
|
|
|
static struct mt352_config avermedia_777 = { |
|
.demod_address = 0xf, |
|
.demod_init = mt352_aver777_init, |
|
}; |
|
|
|
static struct mt352_config avermedia_xc3028_mt352_dev = { |
|
.demod_address = (0x1e >> 1), |
|
.no_tuner = 1, |
|
.demod_init = mt352_avermedia_xc3028_init, |
|
}; |
|
|
|
static struct tda18271_std_map mb86a20s_tda18271_std_map = { |
|
.dvbt_6 = { .if_freq = 3300, .agc_mode = 3, .std = 4, |
|
.if_lvl = 7, .rfagc_top = 0x37, }, |
|
}; |
|
|
|
static struct tda18271_config kworld_tda18271_config = { |
|
.std_map = &mb86a20s_tda18271_std_map, |
|
.gate = TDA18271_GATE_DIGITAL, |
|
.config = 3, /* Use tuner callback for AGC */ |
|
|
|
}; |
|
|
|
static const struct mb86a20s_config kworld_mb86a20s_config = { |
|
.demod_address = 0x10, |
|
}; |
|
|
|
static int kworld_sbtvd_gate_ctrl(struct dvb_frontend* fe, int enable) |
|
{ |
|
struct saa7134_dev *dev = fe->dvb->priv; |
|
|
|
unsigned char initmsg[] = {0x45, 0x97}; |
|
unsigned char msg_enable[] = {0x45, 0xc1}; |
|
unsigned char msg_disable[] = {0x45, 0x81}; |
|
struct i2c_msg msg = {.addr = 0x4b, .flags = 0, .buf = initmsg, .len = 2}; |
|
|
|
if (i2c_transfer(&dev->i2c_adap, &msg, 1) != 1) { |
|
pr_warn("could not access the I2C gate\n"); |
|
return -EIO; |
|
} |
|
if (enable) |
|
msg.buf = msg_enable; |
|
else |
|
msg.buf = msg_disable; |
|
if (i2c_transfer(&dev->i2c_adap, &msg, 1) != 1) { |
|
pr_warn("could not access the I2C gate\n"); |
|
return -EIO; |
|
} |
|
msleep(20); |
|
return 0; |
|
} |
|
|
|
/* ================================================================== |
|
* tda1004x based DVB-T cards, helper functions |
|
*/ |
|
|
|
static int philips_tda1004x_request_firmware(struct dvb_frontend *fe, |
|
const struct firmware **fw, char *name) |
|
{ |
|
struct saa7134_dev *dev = fe->dvb->priv; |
|
return request_firmware(fw, name, &dev->pci->dev); |
|
} |
|
|
|
/* ------------------------------------------------------------------ |
|
* these tuners are tu1216, td1316(a) |
|
*/ |
|
|
|
static int philips_tda6651_pll_set(struct dvb_frontend *fe) |
|
{ |
|
struct dtv_frontend_properties *c = &fe->dtv_property_cache; |
|
struct saa7134_dev *dev = fe->dvb->priv; |
|
struct tda1004x_state *state = fe->demodulator_priv; |
|
u8 addr = state->config->tuner_address; |
|
u8 tuner_buf[4]; |
|
struct i2c_msg tuner_msg = {.addr = addr,.flags = 0,.buf = tuner_buf,.len = |
|
sizeof(tuner_buf) }; |
|
int tuner_frequency = 0; |
|
u8 band, cp, filter; |
|
|
|
/* determine charge pump */ |
|
tuner_frequency = c->frequency + 36166000; |
|
if (tuner_frequency < 87000000) |
|
return -EINVAL; |
|
else if (tuner_frequency < 130000000) |
|
cp = 3; |
|
else if (tuner_frequency < 160000000) |
|
cp = 5; |
|
else if (tuner_frequency < 200000000) |
|
cp = 6; |
|
else if (tuner_frequency < 290000000) |
|
cp = 3; |
|
else if (tuner_frequency < 420000000) |
|
cp = 5; |
|
else if (tuner_frequency < 480000000) |
|
cp = 6; |
|
else if (tuner_frequency < 620000000) |
|
cp = 3; |
|
else if (tuner_frequency < 830000000) |
|
cp = 5; |
|
else if (tuner_frequency < 895000000) |
|
cp = 7; |
|
else |
|
return -EINVAL; |
|
|
|
/* determine band */ |
|
if (c->frequency < 49000000) |
|
return -EINVAL; |
|
else if (c->frequency < 161000000) |
|
band = 1; |
|
else if (c->frequency < 444000000) |
|
band = 2; |
|
else if (c->frequency < 861000000) |
|
band = 4; |
|
else |
|
return -EINVAL; |
|
|
|
/* setup PLL filter */ |
|
switch (c->bandwidth_hz) { |
|
case 6000000: |
|
filter = 0; |
|
break; |
|
|
|
case 7000000: |
|
filter = 0; |
|
break; |
|
|
|
case 8000000: |
|
filter = 1; |
|
break; |
|
|
|
default: |
|
return -EINVAL; |
|
} |
|
|
|
/* calculate divisor |
|
* ((36166000+((1000000/6)/2)) + Finput)/(1000000/6) |
|
*/ |
|
tuner_frequency = (((c->frequency / 1000) * 6) + 217496) / 1000; |
|
|
|
/* setup tuner buffer */ |
|
tuner_buf[0] = (tuner_frequency >> 8) & 0x7f; |
|
tuner_buf[1] = tuner_frequency & 0xff; |
|
tuner_buf[2] = 0xca; |
|
tuner_buf[3] = (cp << 5) | (filter << 3) | band; |
|
|
|
if (fe->ops.i2c_gate_ctrl) |
|
fe->ops.i2c_gate_ctrl(fe, 1); |
|
if (i2c_transfer(&dev->i2c_adap, &tuner_msg, 1) != 1) { |
|
pr_warn("could not write to tuner at addr: 0x%02x\n", |
|
addr << 1); |
|
return -EIO; |
|
} |
|
msleep(1); |
|
return 0; |
|
} |
|
|
|
static int philips_tu1216_init(struct dvb_frontend *fe) |
|
{ |
|
struct saa7134_dev *dev = fe->dvb->priv; |
|
struct tda1004x_state *state = fe->demodulator_priv; |
|
u8 addr = state->config->tuner_address; |
|
static u8 tu1216_init[] = { 0x0b, 0xf5, 0x85, 0xab }; |
|
struct i2c_msg tuner_msg = {.addr = addr,.flags = 0,.buf = tu1216_init,.len = sizeof(tu1216_init) }; |
|
|
|
/* setup PLL configuration */ |
|
if (fe->ops.i2c_gate_ctrl) |
|
fe->ops.i2c_gate_ctrl(fe, 1); |
|
if (i2c_transfer(&dev->i2c_adap, &tuner_msg, 1) != 1) |
|
return -EIO; |
|
msleep(1); |
|
|
|
return 0; |
|
} |
|
|
|
/* ------------------------------------------------------------------ */ |
|
|
|
static struct tda1004x_config philips_tu1216_60_config = { |
|
.demod_address = 0x8, |
|
.invert = 1, |
|
.invert_oclk = 0, |
|
.xtal_freq = TDA10046_XTAL_4M, |
|
.agc_config = TDA10046_AGC_DEFAULT, |
|
.if_freq = TDA10046_FREQ_3617, |
|
.tuner_address = 0x60, |
|
.request_firmware = philips_tda1004x_request_firmware |
|
}; |
|
|
|
static struct tda1004x_config philips_tu1216_61_config = { |
|
|
|
.demod_address = 0x8, |
|
.invert = 1, |
|
.invert_oclk = 0, |
|
.xtal_freq = TDA10046_XTAL_4M, |
|
.agc_config = TDA10046_AGC_DEFAULT, |
|
.if_freq = TDA10046_FREQ_3617, |
|
.tuner_address = 0x61, |
|
.request_firmware = philips_tda1004x_request_firmware |
|
}; |
|
|
|
/* ------------------------------------------------------------------ */ |
|
|
|
static int philips_td1316_tuner_init(struct dvb_frontend *fe) |
|
{ |
|
struct saa7134_dev *dev = fe->dvb->priv; |
|
struct tda1004x_state *state = fe->demodulator_priv; |
|
u8 addr = state->config->tuner_address; |
|
static u8 msg[] = { 0x0b, 0xf5, 0x86, 0xab }; |
|
struct i2c_msg init_msg = {.addr = addr,.flags = 0,.buf = msg,.len = sizeof(msg) }; |
|
|
|
/* setup PLL configuration */ |
|
if (fe->ops.i2c_gate_ctrl) |
|
fe->ops.i2c_gate_ctrl(fe, 1); |
|
if (i2c_transfer(&dev->i2c_adap, &init_msg, 1) != 1) |
|
return -EIO; |
|
return 0; |
|
} |
|
|
|
static int philips_td1316_tuner_set_params(struct dvb_frontend *fe) |
|
{ |
|
return philips_tda6651_pll_set(fe); |
|
} |
|
|
|
static int philips_td1316_tuner_sleep(struct dvb_frontend *fe) |
|
{ |
|
struct saa7134_dev *dev = fe->dvb->priv; |
|
struct tda1004x_state *state = fe->demodulator_priv; |
|
u8 addr = state->config->tuner_address; |
|
static u8 msg[] = { 0x0b, 0xdc, 0x86, 0xa4 }; |
|
struct i2c_msg analog_msg = {.addr = addr,.flags = 0,.buf = msg,.len = sizeof(msg) }; |
|
|
|
/* switch the tuner to analog mode */ |
|
if (fe->ops.i2c_gate_ctrl) |
|
fe->ops.i2c_gate_ctrl(fe, 1); |
|
if (i2c_transfer(&dev->i2c_adap, &analog_msg, 1) != 1) |
|
return -EIO; |
|
return 0; |
|
} |
|
|
|
/* ------------------------------------------------------------------ */ |
|
|
|
static int philips_europa_tuner_init(struct dvb_frontend *fe) |
|
{ |
|
struct saa7134_dev *dev = fe->dvb->priv; |
|
static u8 msg[] = { 0x00, 0x40}; |
|
struct i2c_msg init_msg = {.addr = 0x43,.flags = 0,.buf = msg,.len = sizeof(msg) }; |
|
|
|
|
|
if (philips_td1316_tuner_init(fe)) |
|
return -EIO; |
|
msleep(1); |
|
if (i2c_transfer(&dev->i2c_adap, &init_msg, 1) != 1) |
|
return -EIO; |
|
|
|
return 0; |
|
} |
|
|
|
static int philips_europa_tuner_sleep(struct dvb_frontend *fe) |
|
{ |
|
struct saa7134_dev *dev = fe->dvb->priv; |
|
|
|
static u8 msg[] = { 0x00, 0x14 }; |
|
struct i2c_msg analog_msg = {.addr = 0x43,.flags = 0,.buf = msg,.len = sizeof(msg) }; |
|
|
|
if (philips_td1316_tuner_sleep(fe)) |
|
return -EIO; |
|
|
|
/* switch the board to analog mode */ |
|
if (fe->ops.i2c_gate_ctrl) |
|
fe->ops.i2c_gate_ctrl(fe, 1); |
|
i2c_transfer(&dev->i2c_adap, &analog_msg, 1); |
|
return 0; |
|
} |
|
|
|
static int philips_europa_demod_sleep(struct dvb_frontend *fe) |
|
{ |
|
struct saa7134_dev *dev = fe->dvb->priv; |
|
|
|
if (dev->original_demod_sleep) |
|
dev->original_demod_sleep(fe); |
|
fe->ops.i2c_gate_ctrl(fe, 1); |
|
return 0; |
|
} |
|
|
|
static struct tda1004x_config philips_europa_config = { |
|
|
|
.demod_address = 0x8, |
|
.invert = 0, |
|
.invert_oclk = 0, |
|
.xtal_freq = TDA10046_XTAL_4M, |
|
.agc_config = TDA10046_AGC_IFO_AUTO_POS, |
|
.if_freq = TDA10046_FREQ_052, |
|
.tuner_address = 0x61, |
|
.request_firmware = philips_tda1004x_request_firmware |
|
}; |
|
|
|
static struct tda1004x_config medion_cardbus = { |
|
.demod_address = 0x08, |
|
.invert = 1, |
|
.invert_oclk = 0, |
|
.xtal_freq = TDA10046_XTAL_16M, |
|
.agc_config = TDA10046_AGC_IFO_AUTO_NEG, |
|
.if_freq = TDA10046_FREQ_3613, |
|
.tuner_address = 0x61, |
|
.request_firmware = philips_tda1004x_request_firmware |
|
}; |
|
|
|
static struct tda1004x_config technotrend_budget_t3000_config = { |
|
.demod_address = 0x8, |
|
.invert = 1, |
|
.invert_oclk = 0, |
|
.xtal_freq = TDA10046_XTAL_4M, |
|
.agc_config = TDA10046_AGC_DEFAULT, |
|
.if_freq = TDA10046_FREQ_3617, |
|
.tuner_address = 0x63, |
|
.request_firmware = philips_tda1004x_request_firmware |
|
}; |
|
|
|
/* ------------------------------------------------------------------ |
|
* tda 1004x based cards with philips silicon tuner |
|
*/ |
|
|
|
static int tda8290_i2c_gate_ctrl( struct dvb_frontend* fe, int enable) |
|
{ |
|
struct tda1004x_state *state = fe->demodulator_priv; |
|
|
|
u8 addr = state->config->i2c_gate; |
|
static u8 tda8290_close[] = { 0x21, 0xc0}; |
|
static u8 tda8290_open[] = { 0x21, 0x80}; |
|
struct i2c_msg tda8290_msg = {.addr = addr,.flags = 0, .len = 2}; |
|
if (enable) { |
|
tda8290_msg.buf = tda8290_close; |
|
} else { |
|
tda8290_msg.buf = tda8290_open; |
|
} |
|
if (i2c_transfer(state->i2c, &tda8290_msg, 1) != 1) { |
|
pr_warn("could not access tda8290 I2C gate\n"); |
|
return -EIO; |
|
} |
|
msleep(20); |
|
return 0; |
|
} |
|
|
|
static int philips_tda827x_tuner_init(struct dvb_frontend *fe) |
|
{ |
|
struct saa7134_dev *dev = fe->dvb->priv; |
|
struct tda1004x_state *state = fe->demodulator_priv; |
|
|
|
switch (state->config->antenna_switch) { |
|
case 0: |
|
break; |
|
case 1: |
|
pr_debug("setting GPIO21 to 0 (TV antenna?)\n"); |
|
saa7134_set_gpio(dev, 21, 0); |
|
break; |
|
case 2: |
|
pr_debug("setting GPIO21 to 1 (Radio antenna?)\n"); |
|
saa7134_set_gpio(dev, 21, 1); |
|
break; |
|
} |
|
return 0; |
|
} |
|
|
|
static int philips_tda827x_tuner_sleep(struct dvb_frontend *fe) |
|
{ |
|
struct saa7134_dev *dev = fe->dvb->priv; |
|
struct tda1004x_state *state = fe->demodulator_priv; |
|
|
|
switch (state->config->antenna_switch) { |
|
case 0: |
|
break; |
|
case 1: |
|
pr_debug("setting GPIO21 to 1 (Radio antenna?)\n"); |
|
saa7134_set_gpio(dev, 21, 1); |
|
break; |
|
case 2: |
|
pr_debug("setting GPIO21 to 0 (TV antenna?)\n"); |
|
saa7134_set_gpio(dev, 21, 0); |
|
break; |
|
} |
|
return 0; |
|
} |
|
|
|
static int configure_tda827x_fe(struct saa7134_dev *dev, |
|
struct tda1004x_config *cdec_conf, |
|
struct tda827x_config *tuner_conf) |
|
{ |
|
struct vb2_dvb_frontend *fe0; |
|
|
|
/* Get the first frontend */ |
|
fe0 = vb2_dvb_get_frontend(&dev->frontends, 1); |
|
|
|
if (!fe0) |
|
return -EINVAL; |
|
|
|
fe0->dvb.frontend = dvb_attach(tda10046_attach, cdec_conf, &dev->i2c_adap); |
|
if (fe0->dvb.frontend) { |
|
if (cdec_conf->i2c_gate) |
|
fe0->dvb.frontend->ops.i2c_gate_ctrl = tda8290_i2c_gate_ctrl; |
|
if (dvb_attach(tda827x_attach, fe0->dvb.frontend, |
|
cdec_conf->tuner_address, |
|
&dev->i2c_adap, tuner_conf)) |
|
return 0; |
|
|
|
pr_warn("no tda827x tuner found at addr: %02x\n", |
|
cdec_conf->tuner_address); |
|
} |
|
return -EINVAL; |
|
} |
|
|
|
/* ------------------------------------------------------------------ */ |
|
|
|
static struct tda827x_config tda827x_cfg_0 = { |
|
.init = philips_tda827x_tuner_init, |
|
.sleep = philips_tda827x_tuner_sleep, |
|
.config = 0, |
|
.switch_addr = 0 |
|
}; |
|
|
|
static struct tda827x_config tda827x_cfg_1 = { |
|
.init = philips_tda827x_tuner_init, |
|
.sleep = philips_tda827x_tuner_sleep, |
|
.config = 1, |
|
.switch_addr = 0x4b |
|
}; |
|
|
|
static struct tda827x_config tda827x_cfg_2 = { |
|
.init = philips_tda827x_tuner_init, |
|
.sleep = philips_tda827x_tuner_sleep, |
|
.config = 2, |
|
.switch_addr = 0x4b |
|
}; |
|
|
|
static struct tda827x_config tda827x_cfg_2_sw42 = { |
|
.init = philips_tda827x_tuner_init, |
|
.sleep = philips_tda827x_tuner_sleep, |
|
.config = 2, |
|
.switch_addr = 0x42 |
|
}; |
|
|
|
/* ------------------------------------------------------------------ */ |
|
|
|
static struct tda1004x_config tda827x_lifeview_config = { |
|
.demod_address = 0x08, |
|
.invert = 1, |
|
.invert_oclk = 0, |
|
.xtal_freq = TDA10046_XTAL_16M, |
|
.agc_config = TDA10046_AGC_TDA827X, |
|
.gpio_config = TDA10046_GP11_I, |
|
.if_freq = TDA10046_FREQ_045, |
|
.tuner_address = 0x60, |
|
.request_firmware = philips_tda1004x_request_firmware |
|
}; |
|
|
|
static struct tda1004x_config philips_tiger_config = { |
|
.demod_address = 0x08, |
|
.invert = 1, |
|
.invert_oclk = 0, |
|
.xtal_freq = TDA10046_XTAL_16M, |
|
.agc_config = TDA10046_AGC_TDA827X, |
|
.gpio_config = TDA10046_GP11_I, |
|
.if_freq = TDA10046_FREQ_045, |
|
.i2c_gate = 0x4b, |
|
.tuner_address = 0x61, |
|
.antenna_switch= 1, |
|
.request_firmware = philips_tda1004x_request_firmware |
|
}; |
|
|
|
static struct tda1004x_config cinergy_ht_config = { |
|
.demod_address = 0x08, |
|
.invert = 1, |
|
.invert_oclk = 0, |
|
.xtal_freq = TDA10046_XTAL_16M, |
|
.agc_config = TDA10046_AGC_TDA827X, |
|
.gpio_config = TDA10046_GP01_I, |
|
.if_freq = TDA10046_FREQ_045, |
|
.i2c_gate = 0x4b, |
|
.tuner_address = 0x61, |
|
.request_firmware = philips_tda1004x_request_firmware |
|
}; |
|
|
|
static struct tda1004x_config cinergy_ht_pci_config = { |
|
.demod_address = 0x08, |
|
.invert = 1, |
|
.invert_oclk = 0, |
|
.xtal_freq = TDA10046_XTAL_16M, |
|
.agc_config = TDA10046_AGC_TDA827X, |
|
.gpio_config = TDA10046_GP01_I, |
|
.if_freq = TDA10046_FREQ_045, |
|
.i2c_gate = 0x4b, |
|
.tuner_address = 0x60, |
|
.request_firmware = philips_tda1004x_request_firmware |
|
}; |
|
|
|
static struct tda1004x_config philips_tiger_s_config = { |
|
.demod_address = 0x08, |
|
.invert = 1, |
|
.invert_oclk = 0, |
|
.xtal_freq = TDA10046_XTAL_16M, |
|
.agc_config = TDA10046_AGC_TDA827X, |
|
.gpio_config = TDA10046_GP01_I, |
|
.if_freq = TDA10046_FREQ_045, |
|
.i2c_gate = 0x4b, |
|
.tuner_address = 0x61, |
|
.antenna_switch= 1, |
|
.request_firmware = philips_tda1004x_request_firmware |
|
}; |
|
|
|
static struct tda1004x_config pinnacle_pctv_310i_config = { |
|
.demod_address = 0x08, |
|
.invert = 1, |
|
.invert_oclk = 0, |
|
.xtal_freq = TDA10046_XTAL_16M, |
|
.agc_config = TDA10046_AGC_TDA827X, |
|
.gpio_config = TDA10046_GP11_I, |
|
.if_freq = TDA10046_FREQ_045, |
|
.i2c_gate = 0x4b, |
|
.tuner_address = 0x61, |
|
.request_firmware = philips_tda1004x_request_firmware |
|
}; |
|
|
|
static struct tda1004x_config hauppauge_hvr_1110_config = { |
|
.demod_address = 0x08, |
|
.invert = 1, |
|
.invert_oclk = 0, |
|
.xtal_freq = TDA10046_XTAL_16M, |
|
.agc_config = TDA10046_AGC_TDA827X, |
|
.gpio_config = TDA10046_GP11_I, |
|
.if_freq = TDA10046_FREQ_045, |
|
.i2c_gate = 0x4b, |
|
.tuner_address = 0x61, |
|
.request_firmware = philips_tda1004x_request_firmware |
|
}; |
|
|
|
static struct tda1004x_config asus_p7131_dual_config = { |
|
.demod_address = 0x08, |
|
.invert = 1, |
|
.invert_oclk = 0, |
|
.xtal_freq = TDA10046_XTAL_16M, |
|
.agc_config = TDA10046_AGC_TDA827X, |
|
.gpio_config = TDA10046_GP11_I, |
|
.if_freq = TDA10046_FREQ_045, |
|
.i2c_gate = 0x4b, |
|
.tuner_address = 0x61, |
|
.antenna_switch= 2, |
|
.request_firmware = philips_tda1004x_request_firmware |
|
}; |
|
|
|
static struct tda1004x_config lifeview_trio_config = { |
|
.demod_address = 0x09, |
|
.invert = 1, |
|
.invert_oclk = 0, |
|
.xtal_freq = TDA10046_XTAL_16M, |
|
.agc_config = TDA10046_AGC_TDA827X, |
|
.gpio_config = TDA10046_GP00_I, |
|
.if_freq = TDA10046_FREQ_045, |
|
.tuner_address = 0x60, |
|
.request_firmware = philips_tda1004x_request_firmware |
|
}; |
|
|
|
static struct tda1004x_config tevion_dvbt220rf_config = { |
|
.demod_address = 0x08, |
|
.invert = 1, |
|
.invert_oclk = 0, |
|
.xtal_freq = TDA10046_XTAL_16M, |
|
.agc_config = TDA10046_AGC_TDA827X, |
|
.gpio_config = TDA10046_GP11_I, |
|
.if_freq = TDA10046_FREQ_045, |
|
.tuner_address = 0x60, |
|
.request_firmware = philips_tda1004x_request_firmware |
|
}; |
|
|
|
static struct tda1004x_config md8800_dvbt_config = { |
|
.demod_address = 0x08, |
|
.invert = 1, |
|
.invert_oclk = 0, |
|
.xtal_freq = TDA10046_XTAL_16M, |
|
.agc_config = TDA10046_AGC_TDA827X, |
|
.gpio_config = TDA10046_GP01_I, |
|
.if_freq = TDA10046_FREQ_045, |
|
.i2c_gate = 0x4b, |
|
.tuner_address = 0x60, |
|
.request_firmware = philips_tda1004x_request_firmware |
|
}; |
|
|
|
static struct tda1004x_config asus_p7131_4871_config = { |
|
.demod_address = 0x08, |
|
.invert = 1, |
|
.invert_oclk = 0, |
|
.xtal_freq = TDA10046_XTAL_16M, |
|
.agc_config = TDA10046_AGC_TDA827X, |
|
.gpio_config = TDA10046_GP01_I, |
|
.if_freq = TDA10046_FREQ_045, |
|
.i2c_gate = 0x4b, |
|
.tuner_address = 0x61, |
|
.antenna_switch= 2, |
|
.request_firmware = philips_tda1004x_request_firmware |
|
}; |
|
|
|
static struct tda1004x_config asus_p7131_hybrid_lna_config = { |
|
.demod_address = 0x08, |
|
.invert = 1, |
|
.invert_oclk = 0, |
|
.xtal_freq = TDA10046_XTAL_16M, |
|
.agc_config = TDA10046_AGC_TDA827X, |
|
.gpio_config = TDA10046_GP11_I, |
|
.if_freq = TDA10046_FREQ_045, |
|
.i2c_gate = 0x4b, |
|
.tuner_address = 0x61, |
|
.antenna_switch= 2, |
|
.request_firmware = philips_tda1004x_request_firmware |
|
}; |
|
|
|
static struct tda1004x_config kworld_dvb_t_210_config = { |
|
.demod_address = 0x08, |
|
.invert = 1, |
|
.invert_oclk = 0, |
|
.xtal_freq = TDA10046_XTAL_16M, |
|
.agc_config = TDA10046_AGC_TDA827X, |
|
.gpio_config = TDA10046_GP11_I, |
|
.if_freq = TDA10046_FREQ_045, |
|
.i2c_gate = 0x4b, |
|
.tuner_address = 0x61, |
|
.antenna_switch= 1, |
|
.request_firmware = philips_tda1004x_request_firmware |
|
}; |
|
|
|
static struct tda1004x_config avermedia_super_007_config = { |
|
.demod_address = 0x08, |
|
.invert = 1, |
|
.invert_oclk = 0, |
|
.xtal_freq = TDA10046_XTAL_16M, |
|
.agc_config = TDA10046_AGC_TDA827X, |
|
.gpio_config = TDA10046_GP01_I, |
|
.if_freq = TDA10046_FREQ_045, |
|
.i2c_gate = 0x4b, |
|
.tuner_address = 0x60, |
|
.antenna_switch= 1, |
|
.request_firmware = philips_tda1004x_request_firmware |
|
}; |
|
|
|
static struct tda1004x_config twinhan_dtv_dvb_3056_config = { |
|
.demod_address = 0x08, |
|
.invert = 1, |
|
.invert_oclk = 0, |
|
.xtal_freq = TDA10046_XTAL_16M, |
|
.agc_config = TDA10046_AGC_TDA827X, |
|
.gpio_config = TDA10046_GP01_I, |
|
.if_freq = TDA10046_FREQ_045, |
|
.i2c_gate = 0x42, |
|
.tuner_address = 0x61, |
|
.antenna_switch = 1, |
|
.request_firmware = philips_tda1004x_request_firmware |
|
}; |
|
|
|
static struct tda1004x_config asus_tiger_3in1_config = { |
|
.demod_address = 0x0b, |
|
.invert = 1, |
|
.invert_oclk = 0, |
|
.xtal_freq = TDA10046_XTAL_16M, |
|
.agc_config = TDA10046_AGC_TDA827X, |
|
.gpio_config = TDA10046_GP11_I, |
|
.if_freq = TDA10046_FREQ_045, |
|
.i2c_gate = 0x4b, |
|
.tuner_address = 0x61, |
|
.antenna_switch = 1, |
|
.request_firmware = philips_tda1004x_request_firmware |
|
}; |
|
|
|
static struct tda1004x_config asus_ps3_100_config = { |
|
.demod_address = 0x0b, |
|
.invert = 1, |
|
.invert_oclk = 0, |
|
.xtal_freq = TDA10046_XTAL_16M, |
|
.agc_config = TDA10046_AGC_TDA827X, |
|
.gpio_config = TDA10046_GP11_I, |
|
.if_freq = TDA10046_FREQ_045, |
|
.i2c_gate = 0x4b, |
|
.tuner_address = 0x61, |
|
.antenna_switch = 1, |
|
.request_firmware = philips_tda1004x_request_firmware |
|
}; |
|
|
|
/* ------------------------------------------------------------------ |
|
* special case: this card uses saa713x GPIO22 for the mode switch |
|
*/ |
|
|
|
static int ads_duo_tuner_init(struct dvb_frontend *fe) |
|
{ |
|
struct saa7134_dev *dev = fe->dvb->priv; |
|
philips_tda827x_tuner_init(fe); |
|
/* route TDA8275a AGC input to the channel decoder */ |
|
saa7134_set_gpio(dev, 22, 1); |
|
return 0; |
|
} |
|
|
|
static int ads_duo_tuner_sleep(struct dvb_frontend *fe) |
|
{ |
|
struct saa7134_dev *dev = fe->dvb->priv; |
|
/* route TDA8275a AGC input to the analog IF chip*/ |
|
saa7134_set_gpio(dev, 22, 0); |
|
philips_tda827x_tuner_sleep(fe); |
|
return 0; |
|
} |
|
|
|
static struct tda827x_config ads_duo_cfg = { |
|
.init = ads_duo_tuner_init, |
|
.sleep = ads_duo_tuner_sleep, |
|
.config = 0 |
|
}; |
|
|
|
static struct tda1004x_config ads_tech_duo_config = { |
|
.demod_address = 0x08, |
|
.invert = 1, |
|
.invert_oclk = 0, |
|
.xtal_freq = TDA10046_XTAL_16M, |
|
.agc_config = TDA10046_AGC_TDA827X, |
|
.gpio_config = TDA10046_GP00_I, |
|
.if_freq = TDA10046_FREQ_045, |
|
.tuner_address = 0x61, |
|
.request_firmware = philips_tda1004x_request_firmware |
|
}; |
|
|
|
static struct zl10353_config behold_h6_config = { |
|
.demod_address = 0x1e>>1, |
|
.no_tuner = 1, |
|
.parallel_ts = 1, |
|
.disable_i2c_gate_ctrl = 1, |
|
}; |
|
|
|
static struct xc5000_config behold_x7_tunerconfig = { |
|
.i2c_address = 0xc2>>1, |
|
.if_khz = 4560, |
|
.radio_input = XC5000_RADIO_FM1, |
|
}; |
|
|
|
static struct zl10353_config behold_x7_config = { |
|
.demod_address = 0x1e>>1, |
|
.if2 = 45600, |
|
.no_tuner = 1, |
|
.parallel_ts = 1, |
|
.disable_i2c_gate_ctrl = 1, |
|
}; |
|
|
|
static struct zl10353_config videomate_t750_zl10353_config = { |
|
.demod_address = 0x0f, |
|
.no_tuner = 1, |
|
.parallel_ts = 1, |
|
.disable_i2c_gate_ctrl = 1, |
|
}; |
|
|
|
static struct qt1010_config videomate_t750_qt1010_config = { |
|
.i2c_address = 0x62 |
|
}; |
|
|
|
|
|
/* ================================================================== |
|
* tda10086 based DVB-S cards, helper functions |
|
*/ |
|
|
|
static struct tda10086_config flydvbs = { |
|
.demod_address = 0x0e, |
|
.invert = 0, |
|
.diseqc_tone = 0, |
|
.xtal_freq = TDA10086_XTAL_16M, |
|
}; |
|
|
|
static struct tda10086_config sd1878_4m = { |
|
.demod_address = 0x0e, |
|
.invert = 0, |
|
.diseqc_tone = 0, |
|
.xtal_freq = TDA10086_XTAL_4M, |
|
}; |
|
|
|
/* ------------------------------------------------------------------ |
|
* special case: lnb supply is connected to the gated i2c |
|
*/ |
|
|
|
static int md8800_set_voltage(struct dvb_frontend *fe, |
|
enum fe_sec_voltage voltage) |
|
{ |
|
int res = -EIO; |
|
struct saa7134_dev *dev = fe->dvb->priv; |
|
if (fe->ops.i2c_gate_ctrl) { |
|
fe->ops.i2c_gate_ctrl(fe, 1); |
|
if (dev->original_set_voltage) |
|
res = dev->original_set_voltage(fe, voltage); |
|
fe->ops.i2c_gate_ctrl(fe, 0); |
|
} |
|
return res; |
|
}; |
|
|
|
static int md8800_set_high_voltage(struct dvb_frontend *fe, long arg) |
|
{ |
|
int res = -EIO; |
|
struct saa7134_dev *dev = fe->dvb->priv; |
|
if (fe->ops.i2c_gate_ctrl) { |
|
fe->ops.i2c_gate_ctrl(fe, 1); |
|
if (dev->original_set_high_voltage) |
|
res = dev->original_set_high_voltage(fe, arg); |
|
fe->ops.i2c_gate_ctrl(fe, 0); |
|
} |
|
return res; |
|
}; |
|
|
|
static int md8800_set_voltage2(struct dvb_frontend *fe, |
|
enum fe_sec_voltage voltage) |
|
{ |
|
struct saa7134_dev *dev = fe->dvb->priv; |
|
u8 wbuf[2] = { 0x1f, 00 }; |
|
u8 rbuf; |
|
struct i2c_msg msg[] = { { .addr = 0x08, .flags = 0, .buf = wbuf, .len = 1 }, |
|
{ .addr = 0x08, .flags = I2C_M_RD, .buf = &rbuf, .len = 1 } }; |
|
|
|
if (i2c_transfer(&dev->i2c_adap, msg, 2) != 2) |
|
return -EIO; |
|
/* NOTE: this assumes that gpo1 is used, it might be bit 5 (gpo2) */ |
|
if (voltage == SEC_VOLTAGE_18) |
|
wbuf[1] = rbuf | 0x10; |
|
else |
|
wbuf[1] = rbuf & 0xef; |
|
msg[0].len = 2; |
|
i2c_transfer(&dev->i2c_adap, msg, 1); |
|
return 0; |
|
} |
|
|
|
static int md8800_set_high_voltage2(struct dvb_frontend *fe, long arg) |
|
{ |
|
pr_warn("%s: sorry can't set high LNB supply voltage from here\n", |
|
__func__); |
|
return -EIO; |
|
} |
|
|
|
/* ================================================================== |
|
* nxt200x based ATSC cards, helper functions |
|
*/ |
|
|
|
static const struct nxt200x_config avertvhda180 = { |
|
.demod_address = 0x0a, |
|
}; |
|
|
|
static const struct nxt200x_config kworldatsc110 = { |
|
.demod_address = 0x0a, |
|
}; |
|
|
|
/* ------------------------------------------------------------------ */ |
|
|
|
static struct mt312_config avertv_a700_mt312 = { |
|
.demod_address = 0x0e, |
|
.voltage_inverted = 1, |
|
}; |
|
|
|
static struct zl10036_config avertv_a700_tuner = { |
|
.tuner_address = 0x60, |
|
}; |
|
|
|
static struct mt312_config zl10313_compro_s350_config = { |
|
.demod_address = 0x0e, |
|
}; |
|
|
|
static struct mt312_config zl10313_avermedia_a706_config = { |
|
.demod_address = 0x0e, |
|
}; |
|
|
|
static struct lgdt3305_config hcw_lgdt3305_config = { |
|
.i2c_addr = 0x0e, |
|
.mpeg_mode = LGDT3305_MPEG_SERIAL, |
|
.tpclk_edge = LGDT3305_TPCLK_RISING_EDGE, |
|
.tpvalid_polarity = LGDT3305_TP_VALID_HIGH, |
|
.deny_i2c_rptr = 1, |
|
.spectral_inversion = 1, |
|
.qam_if_khz = 4000, |
|
.vsb_if_khz = 3250, |
|
}; |
|
|
|
static struct tda10048_config hcw_tda10048_config = { |
|
.demod_address = 0x10 >> 1, |
|
.output_mode = TDA10048_SERIAL_OUTPUT, |
|
.fwbulkwritelen = TDA10048_BULKWRITE_200, |
|
.inversion = TDA10048_INVERSION_ON, |
|
.dtv6_if_freq_khz = TDA10048_IF_3300, |
|
.dtv7_if_freq_khz = TDA10048_IF_3500, |
|
.dtv8_if_freq_khz = TDA10048_IF_4000, |
|
.clk_freq_khz = TDA10048_CLK_16000, |
|
.disable_gate_access = 1, |
|
}; |
|
|
|
static struct tda18271_std_map hauppauge_tda18271_std_map = { |
|
.atsc_6 = { .if_freq = 3250, .agc_mode = 3, .std = 4, |
|
.if_lvl = 1, .rfagc_top = 0x58, }, |
|
.qam_6 = { .if_freq = 4000, .agc_mode = 3, .std = 5, |
|
.if_lvl = 1, .rfagc_top = 0x58, }, |
|
}; |
|
|
|
static struct tda18271_config hcw_tda18271_config = { |
|
.std_map = &hauppauge_tda18271_std_map, |
|
.gate = TDA18271_GATE_ANALOG, |
|
.config = 3, |
|
.output_opt = TDA18271_OUTPUT_LT_OFF, |
|
}; |
|
|
|
static struct tda829x_config tda829x_no_probe = { |
|
.probe_tuner = TDA829X_DONT_PROBE, |
|
}; |
|
|
|
static struct tda10048_config zolid_tda10048_config = { |
|
.demod_address = 0x10 >> 1, |
|
.output_mode = TDA10048_PARALLEL_OUTPUT, |
|
.fwbulkwritelen = TDA10048_BULKWRITE_200, |
|
.inversion = TDA10048_INVERSION_ON, |
|
.dtv6_if_freq_khz = TDA10048_IF_3300, |
|
.dtv7_if_freq_khz = TDA10048_IF_3500, |
|
.dtv8_if_freq_khz = TDA10048_IF_4000, |
|
.clk_freq_khz = TDA10048_CLK_16000, |
|
.disable_gate_access = 1, |
|
}; |
|
|
|
static struct tda18271_config zolid_tda18271_config = { |
|
.gate = TDA18271_GATE_ANALOG, |
|
}; |
|
|
|
static struct tda10048_config dtv1000s_tda10048_config = { |
|
.demod_address = 0x10 >> 1, |
|
.output_mode = TDA10048_PARALLEL_OUTPUT, |
|
.fwbulkwritelen = TDA10048_BULKWRITE_200, |
|
.inversion = TDA10048_INVERSION_ON, |
|
.dtv6_if_freq_khz = TDA10048_IF_3300, |
|
.dtv7_if_freq_khz = TDA10048_IF_3800, |
|
.dtv8_if_freq_khz = TDA10048_IF_4300, |
|
.clk_freq_khz = TDA10048_CLK_16000, |
|
.disable_gate_access = 1, |
|
}; |
|
|
|
static struct tda18271_std_map dtv1000s_tda18271_std_map = { |
|
.dvbt_6 = { .if_freq = 3300, .agc_mode = 3, .std = 4, |
|
.if_lvl = 1, .rfagc_top = 0x37, }, |
|
.dvbt_7 = { .if_freq = 3800, .agc_mode = 3, .std = 5, |
|
.if_lvl = 1, .rfagc_top = 0x37, }, |
|
.dvbt_8 = { .if_freq = 4300, .agc_mode = 3, .std = 6, |
|
.if_lvl = 1, .rfagc_top = 0x37, }, |
|
}; |
|
|
|
static struct tda18271_config dtv1000s_tda18271_config = { |
|
.std_map = &dtv1000s_tda18271_std_map, |
|
.gate = TDA18271_GATE_ANALOG, |
|
}; |
|
|
|
static struct lgs8gxx_config prohdtv_pro2_lgs8g75_config = { |
|
.prod = LGS8GXX_PROD_LGS8G75, |
|
.demod_address = 0x1d, |
|
.serial_ts = 0, |
|
.ts_clk_pol = 1, |
|
.ts_clk_gated = 0, |
|
.if_clk_freq = 30400, /* 30.4 MHz */ |
|
.if_freq = 4000, /* 4.00 MHz */ |
|
.if_neg_center = 0, |
|
.ext_adc = 0, |
|
.adc_signed = 1, |
|
.adc_vpp = 3, /* 2.0 Vpp */ |
|
.if_neg_edge = 1, |
|
}; |
|
|
|
static struct tda18271_config prohdtv_pro2_tda18271_config = { |
|
.gate = TDA18271_GATE_ANALOG, |
|
.output_opt = TDA18271_OUTPUT_LT_OFF, |
|
}; |
|
|
|
static struct tda18271_std_map kworld_tda18271_std_map = { |
|
.atsc_6 = { .if_freq = 3250, .agc_mode = 3, .std = 3, |
|
.if_lvl = 6, .rfagc_top = 0x37 }, |
|
.qam_6 = { .if_freq = 4000, .agc_mode = 3, .std = 0, |
|
.if_lvl = 6, .rfagc_top = 0x37 }, |
|
}; |
|
|
|
static struct tda18271_config kworld_pc150u_tda18271_config = { |
|
.std_map = &kworld_tda18271_std_map, |
|
.gate = TDA18271_GATE_ANALOG, |
|
.output_opt = TDA18271_OUTPUT_LT_OFF, |
|
.config = 3, /* Use tuner callback for AGC */ |
|
.rf_cal_on_startup = 1 |
|
}; |
|
|
|
static struct s5h1411_config kworld_s5h1411_config = { |
|
.output_mode = S5H1411_PARALLEL_OUTPUT, |
|
.gpio = S5H1411_GPIO_OFF, |
|
.qam_if = S5H1411_IF_4000, |
|
.vsb_if = S5H1411_IF_3250, |
|
.inversion = S5H1411_INVERSION_ON, |
|
.status_mode = S5H1411_DEMODLOCKING, |
|
.mpeg_timing = |
|
S5H1411_MPEGTIMING_CONTINUOUS_NONINVERTING_CLOCK, |
|
}; |
|
|
|
|
|
/* ================================================================== |
|
* Core code |
|
*/ |
|
|
|
static int dvb_init(struct saa7134_dev *dev) |
|
{ |
|
int ret; |
|
int attach_xc3028 = 0; |
|
struct vb2_dvb_frontend *fe0; |
|
struct vb2_queue *q; |
|
|
|
/* FIXME: add support for multi-frontend */ |
|
mutex_init(&dev->frontends.lock); |
|
INIT_LIST_HEAD(&dev->frontends.felist); |
|
|
|
pr_info("%s() allocating 1 frontend\n", __func__); |
|
fe0 = vb2_dvb_alloc_frontend(&dev->frontends, 1); |
|
if (!fe0) { |
|
pr_err("%s() failed to alloc\n", __func__); |
|
return -ENOMEM; |
|
} |
|
|
|
/* init struct vb2_dvb */ |
|
dev->ts.nr_bufs = 32; |
|
dev->ts.nr_packets = 32*4; |
|
fe0->dvb.name = dev->name; |
|
q = &fe0->dvb.dvbq; |
|
q->type = V4L2_BUF_TYPE_VIDEO_CAPTURE; |
|
q->io_modes = VB2_MMAP | VB2_READ; |
|
q->drv_priv = &dev->ts_q; |
|
q->ops = &saa7134_ts_qops; |
|
q->mem_ops = &vb2_dma_sg_memops; |
|
q->buf_struct_size = sizeof(struct saa7134_buf); |
|
q->timestamp_flags = V4L2_BUF_FLAG_TIMESTAMP_MONOTONIC; |
|
q->lock = &dev->lock; |
|
q->dev = &dev->pci->dev; |
|
ret = vb2_queue_init(q); |
|
if (ret) { |
|
vb2_dvb_dealloc_frontends(&dev->frontends); |
|
return ret; |
|
} |
|
|
|
switch (dev->board) { |
|
case SAA7134_BOARD_PINNACLE_300I_DVBT_PAL: |
|
pr_debug("pinnacle 300i dvb setup\n"); |
|
fe0->dvb.frontend = dvb_attach(mt352_attach, &pinnacle_300i, |
|
&dev->i2c_adap); |
|
if (fe0->dvb.frontend) { |
|
fe0->dvb.frontend->ops.tuner_ops.set_params = mt352_pinnacle_tuner_set_params; |
|
} |
|
break; |
|
case SAA7134_BOARD_AVERMEDIA_777: |
|
case SAA7134_BOARD_AVERMEDIA_A16AR: |
|
pr_debug("avertv 777 dvb setup\n"); |
|
fe0->dvb.frontend = dvb_attach(mt352_attach, &avermedia_777, |
|
&dev->i2c_adap); |
|
if (fe0->dvb.frontend) { |
|
dvb_attach(simple_tuner_attach, fe0->dvb.frontend, |
|
&dev->i2c_adap, 0x61, |
|
TUNER_PHILIPS_TD1316); |
|
} |
|
break; |
|
case SAA7134_BOARD_AVERMEDIA_A16D: |
|
pr_debug("AverMedia A16D dvb setup\n"); |
|
fe0->dvb.frontend = dvb_attach(mt352_attach, |
|
&avermedia_xc3028_mt352_dev, |
|
&dev->i2c_adap); |
|
attach_xc3028 = 1; |
|
break; |
|
case SAA7134_BOARD_MD7134: |
|
fe0->dvb.frontend = dvb_attach(tda10046_attach, |
|
&medion_cardbus, |
|
&dev->i2c_adap); |
|
if (fe0->dvb.frontend) { |
|
/* |
|
* The TV tuner on this board is actually NOT |
|
* behind the demod i2c gate. |
|
* However, the demod EEPROM is indeed there and it |
|
* conflicts with the SAA7134 chip config EEPROM |
|
* if the i2c gate is open (since they have same |
|
* bus addresses) resulting in card PCI SVID / SSID |
|
* being garbage after a reboot from time to time. |
|
* |
|
* Let's just leave the gate permanently closed - |
|
* saa7134_i2c_eeprom_md7134_gate() will close it for |
|
* us at probe time if it was open for some reason. |
|
*/ |
|
fe0->dvb.frontend->ops.i2c_gate_ctrl = NULL; |
|
dvb_attach(simple_tuner_attach, fe0->dvb.frontend, |
|
&dev->i2c_adap, medion_cardbus.tuner_address, |
|
TUNER_PHILIPS_FMD1216ME_MK3); |
|
} |
|
break; |
|
case SAA7134_BOARD_PHILIPS_TOUGH: |
|
fe0->dvb.frontend = dvb_attach(tda10046_attach, |
|
&philips_tu1216_60_config, |
|
&dev->i2c_adap); |
|
if (fe0->dvb.frontend) { |
|
fe0->dvb.frontend->ops.tuner_ops.init = philips_tu1216_init; |
|
fe0->dvb.frontend->ops.tuner_ops.set_params = philips_tda6651_pll_set; |
|
} |
|
break; |
|
case SAA7134_BOARD_FLYDVBTDUO: |
|
case SAA7134_BOARD_FLYDVBT_DUO_CARDBUS: |
|
if (configure_tda827x_fe(dev, &tda827x_lifeview_config, |
|
&tda827x_cfg_0) < 0) |
|
goto detach_frontend; |
|
break; |
|
case SAA7134_BOARD_PHILIPS_EUROPA: |
|
case SAA7134_BOARD_VIDEOMATE_DVBT_300: |
|
case SAA7134_BOARD_ASUS_EUROPA_HYBRID: |
|
fe0->dvb.frontend = dvb_attach(tda10046_attach, |
|
&philips_europa_config, |
|
&dev->i2c_adap); |
|
if (fe0->dvb.frontend) { |
|
dev->original_demod_sleep = fe0->dvb.frontend->ops.sleep; |
|
fe0->dvb.frontend->ops.sleep = philips_europa_demod_sleep; |
|
fe0->dvb.frontend->ops.tuner_ops.init = philips_europa_tuner_init; |
|
fe0->dvb.frontend->ops.tuner_ops.sleep = philips_europa_tuner_sleep; |
|
fe0->dvb.frontend->ops.tuner_ops.set_params = philips_td1316_tuner_set_params; |
|
} |
|
break; |
|
case SAA7134_BOARD_TECHNOTREND_BUDGET_T3000: |
|
fe0->dvb.frontend = dvb_attach(tda10046_attach, |
|
&technotrend_budget_t3000_config, |
|
&dev->i2c_adap); |
|
if (fe0->dvb.frontend) { |
|
dev->original_demod_sleep = fe0->dvb.frontend->ops.sleep; |
|
fe0->dvb.frontend->ops.sleep = philips_europa_demod_sleep; |
|
fe0->dvb.frontend->ops.tuner_ops.init = philips_europa_tuner_init; |
|
fe0->dvb.frontend->ops.tuner_ops.sleep = philips_europa_tuner_sleep; |
|
fe0->dvb.frontend->ops.tuner_ops.set_params = philips_td1316_tuner_set_params; |
|
} |
|
break; |
|
case SAA7134_BOARD_VIDEOMATE_DVBT_200: |
|
fe0->dvb.frontend = dvb_attach(tda10046_attach, |
|
&philips_tu1216_61_config, |
|
&dev->i2c_adap); |
|
if (fe0->dvb.frontend) { |
|
fe0->dvb.frontend->ops.tuner_ops.init = philips_tu1216_init; |
|
fe0->dvb.frontend->ops.tuner_ops.set_params = philips_tda6651_pll_set; |
|
} |
|
break; |
|
case SAA7134_BOARD_KWORLD_DVBT_210: |
|
if (configure_tda827x_fe(dev, &kworld_dvb_t_210_config, |
|
&tda827x_cfg_2) < 0) |
|
goto detach_frontend; |
|
break; |
|
case SAA7134_BOARD_HAUPPAUGE_HVR1120: |
|
fe0->dvb.frontend = dvb_attach(tda10048_attach, |
|
&hcw_tda10048_config, |
|
&dev->i2c_adap); |
|
if (fe0->dvb.frontend != NULL) { |
|
dvb_attach(tda829x_attach, fe0->dvb.frontend, |
|
&dev->i2c_adap, 0x4b, |
|
&tda829x_no_probe); |
|
dvb_attach(tda18271_attach, fe0->dvb.frontend, |
|
0x60, &dev->i2c_adap, |
|
&hcw_tda18271_config); |
|
} |
|
break; |
|
case SAA7134_BOARD_PHILIPS_TIGER: |
|
if (configure_tda827x_fe(dev, &philips_tiger_config, |
|
&tda827x_cfg_0) < 0) |
|
goto detach_frontend; |
|
break; |
|
case SAA7134_BOARD_PINNACLE_PCTV_310i: |
|
if (configure_tda827x_fe(dev, &pinnacle_pctv_310i_config, |
|
&tda827x_cfg_1) < 0) |
|
goto detach_frontend; |
|
break; |
|
case SAA7134_BOARD_HAUPPAUGE_HVR1110: |
|
if (configure_tda827x_fe(dev, &hauppauge_hvr_1110_config, |
|
&tda827x_cfg_1) < 0) |
|
goto detach_frontend; |
|
break; |
|
case SAA7134_BOARD_HAUPPAUGE_HVR1150: |
|
fe0->dvb.frontend = dvb_attach(lgdt3305_attach, |
|
&hcw_lgdt3305_config, |
|
&dev->i2c_adap); |
|
if (fe0->dvb.frontend) { |
|
dvb_attach(tda829x_attach, fe0->dvb.frontend, |
|
&dev->i2c_adap, 0x4b, |
|
&tda829x_no_probe); |
|
dvb_attach(tda18271_attach, fe0->dvb.frontend, |
|
0x60, &dev->i2c_adap, |
|
&hcw_tda18271_config); |
|
} |
|
break; |
|
case SAA7134_BOARD_ASUSTeK_P7131_DUAL: |
|
if (configure_tda827x_fe(dev, &asus_p7131_dual_config, |
|
&tda827x_cfg_0) < 0) |
|
goto detach_frontend; |
|
break; |
|
case SAA7134_BOARD_FLYDVBT_LR301: |
|
if (configure_tda827x_fe(dev, &tda827x_lifeview_config, |
|
&tda827x_cfg_0) < 0) |
|
goto detach_frontend; |
|
break; |
|
case SAA7134_BOARD_FLYDVB_TRIO: |
|
if (!use_frontend) { /* terrestrial */ |
|
if (configure_tda827x_fe(dev, &lifeview_trio_config, |
|
&tda827x_cfg_0) < 0) |
|
goto detach_frontend; |
|
} else { /* satellite */ |
|
fe0->dvb.frontend = dvb_attach(tda10086_attach, &flydvbs, &dev->i2c_adap); |
|
if (fe0->dvb.frontend) { |
|
if (dvb_attach(tda826x_attach, fe0->dvb.frontend, 0x63, |
|
&dev->i2c_adap, 0) == NULL) { |
|
pr_warn("%s: Lifeview Trio, No tda826x found!\n", |
|
__func__); |
|
goto detach_frontend; |
|
} |
|
if (dvb_attach(isl6421_attach, fe0->dvb.frontend, |
|
&dev->i2c_adap, |
|
0x08, 0, 0, false) == NULL) { |
|
pr_warn("%s: Lifeview Trio, No ISL6421 found!\n", |
|
__func__); |
|
goto detach_frontend; |
|
} |
|
} |
|
} |
|
break; |
|
case SAA7134_BOARD_ADS_DUO_CARDBUS_PTV331: |
|
case SAA7134_BOARD_FLYDVBT_HYBRID_CARDBUS: |
|
fe0->dvb.frontend = dvb_attach(tda10046_attach, |
|
&ads_tech_duo_config, |
|
&dev->i2c_adap); |
|
if (fe0->dvb.frontend) { |
|
if (dvb_attach(tda827x_attach,fe0->dvb.frontend, |
|
ads_tech_duo_config.tuner_address, &dev->i2c_adap, |
|
&ads_duo_cfg) == NULL) { |
|
pr_warn("no tda827x tuner found at addr: %02x\n", |
|
ads_tech_duo_config.tuner_address); |
|
goto detach_frontend; |
|
} |
|
} else |
|
pr_warn("failed to attach tda10046\n"); |
|
break; |
|
case SAA7134_BOARD_TEVION_DVBT_220RF: |
|
if (configure_tda827x_fe(dev, &tevion_dvbt220rf_config, |
|
&tda827x_cfg_0) < 0) |
|
goto detach_frontend; |
|
break; |
|
case SAA7134_BOARD_MEDION_MD8800_QUADRO: |
|
if (!use_frontend) { /* terrestrial */ |
|
if (configure_tda827x_fe(dev, &md8800_dvbt_config, |
|
&tda827x_cfg_0) < 0) |
|
goto detach_frontend; |
|
} else { /* satellite */ |
|
fe0->dvb.frontend = dvb_attach(tda10086_attach, |
|
&flydvbs, &dev->i2c_adap); |
|
if (fe0->dvb.frontend) { |
|
struct dvb_frontend *fe = fe0->dvb.frontend; |
|
u8 dev_id = dev->eedata[2]; |
|
u8 data = 0xc4; |
|
struct i2c_msg msg = {.addr = 0x08, .flags = 0, .len = 1}; |
|
|
|
if (dvb_attach(tda826x_attach, fe0->dvb.frontend, |
|
0x60, &dev->i2c_adap, 0) == NULL) { |
|
pr_warn("%s: Medion Quadro, no tda826x found !\n", |
|
__func__); |
|
goto detach_frontend; |
|
} |
|
if (dev_id != 0x08) { |
|
/* we need to open the i2c gate (we know it exists) */ |
|
fe->ops.i2c_gate_ctrl(fe, 1); |
|
if (dvb_attach(isl6405_attach, fe, |
|
&dev->i2c_adap, 0x08, 0, 0) == NULL) { |
|
pr_warn("%s: Medion Quadro, no ISL6405 found !\n", |
|
__func__); |
|
goto detach_frontend; |
|
} |
|
if (dev_id == 0x07) { |
|
/* fire up the 2nd section of the LNB supply since |
|
we can't do this from the other section */ |
|
msg.buf = &data; |
|
i2c_transfer(&dev->i2c_adap, &msg, 1); |
|
} |
|
fe->ops.i2c_gate_ctrl(fe, 0); |
|
dev->original_set_voltage = fe->ops.set_voltage; |
|
fe->ops.set_voltage = md8800_set_voltage; |
|
dev->original_set_high_voltage = fe->ops.enable_high_lnb_voltage; |
|
fe->ops.enable_high_lnb_voltage = md8800_set_high_voltage; |
|
} else { |
|
fe->ops.set_voltage = md8800_set_voltage2; |
|
fe->ops.enable_high_lnb_voltage = md8800_set_high_voltage2; |
|
} |
|
} |
|
} |
|
break; |
|
case SAA7134_BOARD_AVERMEDIA_AVERTVHD_A180: |
|
fe0->dvb.frontend = dvb_attach(nxt200x_attach, &avertvhda180, |
|
&dev->i2c_adap); |
|
if (fe0->dvb.frontend) |
|
dvb_attach(dvb_pll_attach, fe0->dvb.frontend, 0x61, |
|
NULL, DVB_PLL_TDHU2); |
|
break; |
|
case SAA7134_BOARD_ADS_INSTANT_HDTV_PCI: |
|
case SAA7134_BOARD_KWORLD_ATSC110: |
|
fe0->dvb.frontend = dvb_attach(nxt200x_attach, &kworldatsc110, |
|
&dev->i2c_adap); |
|
if (fe0->dvb.frontend) |
|
dvb_attach(simple_tuner_attach, fe0->dvb.frontend, |
|
&dev->i2c_adap, 0x61, |
|
TUNER_PHILIPS_TUV1236D); |
|
break; |
|
case SAA7134_BOARD_KWORLD_PC150U: |
|
saa7134_set_gpio(dev, 18, 1); /* Switch to digital mode */ |
|
saa7134_tuner_callback(dev, 0, |
|
TDA18271_CALLBACK_CMD_AGC_ENABLE, 1); |
|
fe0->dvb.frontend = dvb_attach(s5h1411_attach, |
|
&kworld_s5h1411_config, |
|
&dev->i2c_adap); |
|
if (fe0->dvb.frontend != NULL) { |
|
dvb_attach(tda829x_attach, fe0->dvb.frontend, |
|
&dev->i2c_adap, 0x4b, |
|
&tda829x_no_probe); |
|
dvb_attach(tda18271_attach, fe0->dvb.frontend, |
|
0x60, &dev->i2c_adap, |
|
&kworld_pc150u_tda18271_config); |
|
} |
|
break; |
|
case SAA7134_BOARD_FLYDVBS_LR300: |
|
fe0->dvb.frontend = dvb_attach(tda10086_attach, &flydvbs, |
|
&dev->i2c_adap); |
|
if (fe0->dvb.frontend) { |
|
if (dvb_attach(tda826x_attach, fe0->dvb.frontend, 0x60, |
|
&dev->i2c_adap, 0) == NULL) { |
|
pr_warn("%s: No tda826x found!\n", __func__); |
|
goto detach_frontend; |
|
} |
|
if (dvb_attach(isl6421_attach, fe0->dvb.frontend, |
|
&dev->i2c_adap, |
|
0x08, 0, 0, false) == NULL) { |
|
pr_warn("%s: No ISL6421 found!\n", __func__); |
|
goto detach_frontend; |
|
} |
|
} |
|
break; |
|
case SAA7134_BOARD_ASUS_EUROPA2_HYBRID: |
|
fe0->dvb.frontend = dvb_attach(tda10046_attach, |
|
&medion_cardbus, |
|
&dev->i2c_adap); |
|
if (fe0->dvb.frontend) { |
|
dev->original_demod_sleep = fe0->dvb.frontend->ops.sleep; |
|
fe0->dvb.frontend->ops.sleep = philips_europa_demod_sleep; |
|
|
|
dvb_attach(simple_tuner_attach, fe0->dvb.frontend, |
|
&dev->i2c_adap, medion_cardbus.tuner_address, |
|
TUNER_PHILIPS_FMD1216ME_MK3); |
|
} |
|
break; |
|
case SAA7134_BOARD_VIDEOMATE_DVBT_200A: |
|
fe0->dvb.frontend = dvb_attach(tda10046_attach, |
|
&philips_europa_config, |
|
&dev->i2c_adap); |
|
if (fe0->dvb.frontend) { |
|
fe0->dvb.frontend->ops.tuner_ops.init = philips_td1316_tuner_init; |
|
fe0->dvb.frontend->ops.tuner_ops.set_params = philips_td1316_tuner_set_params; |
|
} |
|
break; |
|
case SAA7134_BOARD_CINERGY_HT_PCMCIA: |
|
if (configure_tda827x_fe(dev, &cinergy_ht_config, |
|
&tda827x_cfg_0) < 0) |
|
goto detach_frontend; |
|
break; |
|
case SAA7134_BOARD_CINERGY_HT_PCI: |
|
if (configure_tda827x_fe(dev, &cinergy_ht_pci_config, |
|
&tda827x_cfg_0) < 0) |
|
goto detach_frontend; |
|
break; |
|
case SAA7134_BOARD_PHILIPS_TIGER_S: |
|
if (configure_tda827x_fe(dev, &philips_tiger_s_config, |
|
&tda827x_cfg_2) < 0) |
|
goto detach_frontend; |
|
break; |
|
case SAA7134_BOARD_ASUS_P7131_4871: |
|
if (configure_tda827x_fe(dev, &asus_p7131_4871_config, |
|
&tda827x_cfg_2) < 0) |
|
goto detach_frontend; |
|
break; |
|
case SAA7134_BOARD_ASUSTeK_P7131_HYBRID_LNA: |
|
if (configure_tda827x_fe(dev, &asus_p7131_hybrid_lna_config, |
|
&tda827x_cfg_2) < 0) |
|
goto detach_frontend; |
|
break; |
|
case SAA7134_BOARD_AVERMEDIA_SUPER_007: |
|
if (configure_tda827x_fe(dev, &avermedia_super_007_config, |
|
&tda827x_cfg_0) < 0) |
|
goto detach_frontend; |
|
break; |
|
case SAA7134_BOARD_TWINHAN_DTV_DVB_3056: |
|
if (configure_tda827x_fe(dev, &twinhan_dtv_dvb_3056_config, |
|
&tda827x_cfg_2_sw42) < 0) |
|
goto detach_frontend; |
|
break; |
|
case SAA7134_BOARD_PHILIPS_SNAKE: |
|
fe0->dvb.frontend = dvb_attach(tda10086_attach, &flydvbs, |
|
&dev->i2c_adap); |
|
if (fe0->dvb.frontend) { |
|
if (dvb_attach(tda826x_attach, fe0->dvb.frontend, 0x60, |
|
&dev->i2c_adap, 0) == NULL) { |
|
pr_warn("%s: No tda826x found!\n", __func__); |
|
goto detach_frontend; |
|
} |
|
if (dvb_attach(lnbp21_attach, fe0->dvb.frontend, |
|
&dev->i2c_adap, 0, 0) == NULL) { |
|
pr_warn("%s: No lnbp21 found!\n", __func__); |
|
goto detach_frontend; |
|
} |
|
} |
|
break; |
|
case SAA7134_BOARD_CREATIX_CTX953: |
|
if (configure_tda827x_fe(dev, &md8800_dvbt_config, |
|
&tda827x_cfg_0) < 0) |
|
goto detach_frontend; |
|
break; |
|
case SAA7134_BOARD_MSI_TVANYWHERE_AD11: |
|
if (configure_tda827x_fe(dev, &philips_tiger_s_config, |
|
&tda827x_cfg_2) < 0) |
|
goto detach_frontend; |
|
break; |
|
case SAA7134_BOARD_AVERMEDIA_CARDBUS_506: |
|
pr_debug("AverMedia E506R dvb setup\n"); |
|
saa7134_set_gpio(dev, 25, 0); |
|
msleep(10); |
|
saa7134_set_gpio(dev, 25, 1); |
|
fe0->dvb.frontend = dvb_attach(mt352_attach, |
|
&avermedia_xc3028_mt352_dev, |
|
&dev->i2c_adap); |
|
attach_xc3028 = 1; |
|
break; |
|
case SAA7134_BOARD_MD7134_BRIDGE_2: |
|
fe0->dvb.frontend = dvb_attach(tda10086_attach, |
|
&sd1878_4m, &dev->i2c_adap); |
|
if (fe0->dvb.frontend) { |
|
struct dvb_frontend *fe; |
|
if (dvb_attach(dvb_pll_attach, fe0->dvb.frontend, 0x60, |
|
&dev->i2c_adap, DVB_PLL_PHILIPS_SD1878_TDA8261) == NULL) { |
|
pr_warn("%s: MD7134 DVB-S, no SD1878 found !\n", |
|
__func__); |
|
goto detach_frontend; |
|
} |
|
/* we need to open the i2c gate (we know it exists) */ |
|
fe = fe0->dvb.frontend; |
|
fe->ops.i2c_gate_ctrl(fe, 1); |
|
if (dvb_attach(isl6405_attach, fe, |
|
&dev->i2c_adap, 0x08, 0, 0) == NULL) { |
|
pr_warn("%s: MD7134 DVB-S, no ISL6405 found !\n", |
|
__func__); |
|
goto detach_frontend; |
|
} |
|
fe->ops.i2c_gate_ctrl(fe, 0); |
|
dev->original_set_voltage = fe->ops.set_voltage; |
|
fe->ops.set_voltage = md8800_set_voltage; |
|
dev->original_set_high_voltage = fe->ops.enable_high_lnb_voltage; |
|
fe->ops.enable_high_lnb_voltage = md8800_set_high_voltage; |
|
} |
|
break; |
|
case SAA7134_BOARD_AVERMEDIA_M103: |
|
saa7134_set_gpio(dev, 25, 0); |
|
msleep(10); |
|
saa7134_set_gpio(dev, 25, 1); |
|
fe0->dvb.frontend = dvb_attach(mt352_attach, |
|
&avermedia_xc3028_mt352_dev, |
|
&dev->i2c_adap); |
|
attach_xc3028 = 1; |
|
break; |
|
case SAA7134_BOARD_ASUSTeK_TIGER_3IN1: |
|
if (!use_frontend) { /* terrestrial */ |
|
if (configure_tda827x_fe(dev, &asus_tiger_3in1_config, |
|
&tda827x_cfg_2) < 0) |
|
goto detach_frontend; |
|
} else { /* satellite */ |
|
fe0->dvb.frontend = dvb_attach(tda10086_attach, |
|
&flydvbs, &dev->i2c_adap); |
|
if (fe0->dvb.frontend) { |
|
if (dvb_attach(tda826x_attach, |
|
fe0->dvb.frontend, 0x60, |
|
&dev->i2c_adap, 0) == NULL) { |
|
pr_warn("%s: Asus Tiger 3in1, no tda826x found!\n", |
|
__func__); |
|
goto detach_frontend; |
|
} |
|
if (dvb_attach(lnbp21_attach, fe0->dvb.frontend, |
|
&dev->i2c_adap, 0, 0) == NULL) { |
|
pr_warn("%s: Asus Tiger 3in1, no lnbp21 found!\n", |
|
__func__); |
|
goto detach_frontend; |
|
} |
|
} |
|
} |
|
break; |
|
case SAA7134_BOARD_ASUSTeK_PS3_100: |
|
if (!use_frontend) { /* terrestrial */ |
|
if (configure_tda827x_fe(dev, &asus_ps3_100_config, |
|
&tda827x_cfg_2) < 0) |
|
goto detach_frontend; |
|
} else { /* satellite */ |
|
fe0->dvb.frontend = dvb_attach(tda10086_attach, |
|
&flydvbs, &dev->i2c_adap); |
|
if (fe0->dvb.frontend) { |
|
if (dvb_attach(tda826x_attach, |
|
fe0->dvb.frontend, 0x60, |
|
&dev->i2c_adap, 0) == NULL) { |
|
pr_warn("%s: Asus My Cinema PS3-100, no tda826x found!\n", |
|
__func__); |
|
goto detach_frontend; |
|
} |
|
if (dvb_attach(lnbp21_attach, fe0->dvb.frontend, |
|
&dev->i2c_adap, 0, 0) == NULL) { |
|
pr_warn("%s: Asus My Cinema PS3-100, no lnbp21 found!\n", |
|
__func__); |
|
goto detach_frontend; |
|
} |
|
} |
|
} |
|
break; |
|
case SAA7134_BOARD_ASUSTeK_TIGER: |
|
if (configure_tda827x_fe(dev, &philips_tiger_config, |
|
&tda827x_cfg_0) < 0) |
|
goto detach_frontend; |
|
break; |
|
case SAA7134_BOARD_BEHOLD_H6: |
|
fe0->dvb.frontend = dvb_attach(zl10353_attach, |
|
&behold_h6_config, |
|
&dev->i2c_adap); |
|
if (fe0->dvb.frontend) { |
|
dvb_attach(simple_tuner_attach, fe0->dvb.frontend, |
|
&dev->i2c_adap, 0x61, |
|
TUNER_PHILIPS_FMD1216MEX_MK3); |
|
} |
|
break; |
|
case SAA7134_BOARD_BEHOLD_X7: |
|
fe0->dvb.frontend = dvb_attach(zl10353_attach, |
|
&behold_x7_config, |
|
&dev->i2c_adap); |
|
if (fe0->dvb.frontend) { |
|
dvb_attach(xc5000_attach, fe0->dvb.frontend, |
|
&dev->i2c_adap, &behold_x7_tunerconfig); |
|
} |
|
break; |
|
case SAA7134_BOARD_BEHOLD_H7: |
|
fe0->dvb.frontend = dvb_attach(zl10353_attach, |
|
&behold_x7_config, |
|
&dev->i2c_adap); |
|
if (fe0->dvb.frontend) { |
|
dvb_attach(xc5000_attach, fe0->dvb.frontend, |
|
&dev->i2c_adap, &behold_x7_tunerconfig); |
|
} |
|
break; |
|
case SAA7134_BOARD_AVERMEDIA_A700_PRO: |
|
case SAA7134_BOARD_AVERMEDIA_A700_HYBRID: |
|
/* Zarlink ZL10313 */ |
|
fe0->dvb.frontend = dvb_attach(mt312_attach, |
|
&avertv_a700_mt312, &dev->i2c_adap); |
|
if (fe0->dvb.frontend) { |
|
if (dvb_attach(zl10036_attach, fe0->dvb.frontend, |
|
&avertv_a700_tuner, &dev->i2c_adap) == NULL) { |
|
pr_warn("%s: No zl10036 found!\n", |
|
__func__); |
|
} |
|
} |
|
break; |
|
case SAA7134_BOARD_VIDEOMATE_S350: |
|
fe0->dvb.frontend = dvb_attach(mt312_attach, |
|
&zl10313_compro_s350_config, &dev->i2c_adap); |
|
if (fe0->dvb.frontend) |
|
if (dvb_attach(zl10039_attach, fe0->dvb.frontend, |
|
0x60, &dev->i2c_adap) == NULL) |
|
pr_warn("%s: No zl10039 found!\n", |
|
__func__); |
|
|
|
break; |
|
case SAA7134_BOARD_VIDEOMATE_T750: |
|
fe0->dvb.frontend = dvb_attach(zl10353_attach, |
|
&videomate_t750_zl10353_config, |
|
&dev->i2c_adap); |
|
if (fe0->dvb.frontend != NULL) { |
|
if (dvb_attach(qt1010_attach, |
|
fe0->dvb.frontend, |
|
&dev->i2c_adap, |
|
&videomate_t750_qt1010_config) == NULL) |
|
pr_warn("error attaching QT1010\n"); |
|
} |
|
break; |
|
case SAA7134_BOARD_ZOLID_HYBRID_PCI: |
|
fe0->dvb.frontend = dvb_attach(tda10048_attach, |
|
&zolid_tda10048_config, |
|
&dev->i2c_adap); |
|
if (fe0->dvb.frontend != NULL) { |
|
dvb_attach(tda829x_attach, fe0->dvb.frontend, |
|
&dev->i2c_adap, 0x4b, |
|
&tda829x_no_probe); |
|
dvb_attach(tda18271_attach, fe0->dvb.frontend, |
|
0x60, &dev->i2c_adap, |
|
&zolid_tda18271_config); |
|
} |
|
break; |
|
case SAA7134_BOARD_LEADTEK_WINFAST_DTV1000S: |
|
fe0->dvb.frontend = dvb_attach(tda10048_attach, |
|
&dtv1000s_tda10048_config, |
|
&dev->i2c_adap); |
|
if (fe0->dvb.frontend != NULL) { |
|
dvb_attach(tda829x_attach, fe0->dvb.frontend, |
|
&dev->i2c_adap, 0x4b, |
|
&tda829x_no_probe); |
|
dvb_attach(tda18271_attach, fe0->dvb.frontend, |
|
0x60, &dev->i2c_adap, |
|
&dtv1000s_tda18271_config); |
|
} |
|
break; |
|
case SAA7134_BOARD_KWORLD_PCI_SBTVD_FULLSEG: |
|
/* Switch to digital mode */ |
|
saa7134_tuner_callback(dev, 0, |
|
TDA18271_CALLBACK_CMD_AGC_ENABLE, 1); |
|
fe0->dvb.frontend = dvb_attach(mb86a20s_attach, |
|
&kworld_mb86a20s_config, |
|
&dev->i2c_adap); |
|
if (fe0->dvb.frontend != NULL) { |
|
dvb_attach(tda829x_attach, fe0->dvb.frontend, |
|
&dev->i2c_adap, 0x4b, |
|
&tda829x_no_probe); |
|
fe0->dvb.frontend->ops.i2c_gate_ctrl = kworld_sbtvd_gate_ctrl; |
|
dvb_attach(tda18271_attach, fe0->dvb.frontend, |
|
0x60, &dev->i2c_adap, |
|
&kworld_tda18271_config); |
|
} |
|
|
|
/* mb86a20s need to use the I2C gateway */ |
|
break; |
|
case SAA7134_BOARD_MAGICPRO_PROHDTV_PRO2: |
|
fe0->dvb.frontend = dvb_attach(lgs8gxx_attach, |
|
&prohdtv_pro2_lgs8g75_config, |
|
&dev->i2c_adap); |
|
if (fe0->dvb.frontend != NULL) { |
|
dvb_attach(tda829x_attach, fe0->dvb.frontend, |
|
&dev->i2c_adap, 0x4b, |
|
&tda829x_no_probe); |
|
dvb_attach(tda18271_attach, fe0->dvb.frontend, |
|
0x60, &dev->i2c_adap, |
|
&prohdtv_pro2_tda18271_config); |
|
} |
|
break; |
|
case SAA7134_BOARD_AVERMEDIA_A706: |
|
/* Enable all DVB-S devices now */ |
|
/* CE5039 DVB-S tuner SLEEP pin low */ |
|
saa7134_set_gpio(dev, 23, 0); |
|
/* CE6313 DVB-S demod SLEEP pin low */ |
|
saa7134_set_gpio(dev, 9, 0); |
|
/* CE6313 DVB-S demod RESET# pin high */ |
|
saa7134_set_gpio(dev, 25, 1); |
|
msleep(1); |
|
fe0->dvb.frontend = dvb_attach(mt312_attach, |
|
&zl10313_avermedia_a706_config, &dev->i2c_adap); |
|
if (fe0->dvb.frontend) { |
|
fe0->dvb.frontend->ops.i2c_gate_ctrl = NULL; |
|
if (dvb_attach(zl10039_attach, fe0->dvb.frontend, |
|
0x60, &dev->i2c_adap) == NULL) |
|
pr_warn("%s: No zl10039 found!\n", |
|
__func__); |
|
} |
|
break; |
|
default: |
|
pr_warn("Huh? unknown DVB card?\n"); |
|
break; |
|
} |
|
|
|
if (attach_xc3028) { |
|
struct dvb_frontend *fe; |
|
struct xc2028_config cfg = { |
|
.i2c_adap = &dev->i2c_adap, |
|
.i2c_addr = 0x61, |
|
}; |
|
|
|
if (!fe0->dvb.frontend) |
|
goto detach_frontend; |
|
|
|
fe = dvb_attach(xc2028_attach, fe0->dvb.frontend, &cfg); |
|
if (!fe) { |
|
pr_err("%s/2: xc3028 attach failed\n", |
|
dev->name); |
|
goto detach_frontend; |
|
} |
|
} |
|
|
|
if (NULL == fe0->dvb.frontend) { |
|
pr_err("%s/dvb: frontend initialization failed\n", dev->name); |
|
goto detach_frontend; |
|
} |
|
/* define general-purpose callback pointer */ |
|
fe0->dvb.frontend->callback = saa7134_tuner_callback; |
|
|
|
/* register everything else */ |
|
#ifndef CONFIG_MEDIA_CONTROLLER_DVB |
|
ret = vb2_dvb_register_bus(&dev->frontends, THIS_MODULE, dev, |
|
&dev->pci->dev, NULL, |
|
adapter_nr, 0); |
|
#else |
|
ret = vb2_dvb_register_bus(&dev->frontends, THIS_MODULE, dev, |
|
&dev->pci->dev, dev->media_dev, |
|
adapter_nr, 0); |
|
#endif |
|
|
|
/* this sequence is necessary to make the tda1004x load its firmware |
|
* and to enter analog mode of hybrid boards |
|
*/ |
|
if (!ret) { |
|
if (fe0->dvb.frontend->ops.init) |
|
fe0->dvb.frontend->ops.init(fe0->dvb.frontend); |
|
if (fe0->dvb.frontend->ops.sleep) |
|
fe0->dvb.frontend->ops.sleep(fe0->dvb.frontend); |
|
if (fe0->dvb.frontend->ops.tuner_ops.sleep) |
|
fe0->dvb.frontend->ops.tuner_ops.sleep(fe0->dvb.frontend); |
|
} |
|
return ret; |
|
|
|
detach_frontend: |
|
vb2_dvb_dealloc_frontends(&dev->frontends); |
|
vb2_queue_release(&fe0->dvb.dvbq); |
|
return -EINVAL; |
|
} |
|
|
|
static int dvb_fini(struct saa7134_dev *dev) |
|
{ |
|
struct vb2_dvb_frontend *fe0; |
|
|
|
/* Get the first frontend */ |
|
fe0 = vb2_dvb_get_frontend(&dev->frontends, 1); |
|
if (!fe0) |
|
return -EINVAL; |
|
|
|
/* FIXME: I suspect that this code is bogus, since the entry for |
|
Pinnacle 300I DVB-T PAL already defines the proper init to allow |
|
the detection of mt2032 (TDA9887_PORT2_INACTIVE) |
|
*/ |
|
if (dev->board == SAA7134_BOARD_PINNACLE_300I_DVBT_PAL) { |
|
struct v4l2_priv_tun_config tda9887_cfg; |
|
static int on = TDA9887_PRESENT | TDA9887_PORT2_INACTIVE; |
|
|
|
tda9887_cfg.tuner = TUNER_TDA9887; |
|
tda9887_cfg.priv = &on; |
|
|
|
/* otherwise we don't detect the tuner on next insmod */ |
|
saa_call_all(dev, tuner, s_config, &tda9887_cfg); |
|
} else if (dev->board == SAA7134_BOARD_MEDION_MD8800_QUADRO) { |
|
if ((dev->eedata[2] == 0x07) && use_frontend) { |
|
/* turn off the 2nd lnb supply */ |
|
u8 data = 0x80; |
|
struct i2c_msg msg = {.addr = 0x08, .buf = &data, .flags = 0, .len = 1}; |
|
struct dvb_frontend *fe; |
|
fe = fe0->dvb.frontend; |
|
if (fe->ops.i2c_gate_ctrl) { |
|
fe->ops.i2c_gate_ctrl(fe, 1); |
|
i2c_transfer(&dev->i2c_adap, &msg, 1); |
|
fe->ops.i2c_gate_ctrl(fe, 0); |
|
} |
|
} |
|
} |
|
vb2_dvb_unregister_bus(&dev->frontends); |
|
vb2_queue_release(&fe0->dvb.dvbq); |
|
return 0; |
|
} |
|
|
|
static struct saa7134_mpeg_ops dvb_ops = { |
|
.type = SAA7134_MPEG_DVB, |
|
.init = dvb_init, |
|
.fini = dvb_fini, |
|
}; |
|
|
|
static int __init dvb_register(void) |
|
{ |
|
return saa7134_ts_register(&dvb_ops); |
|
} |
|
|
|
static void __exit dvb_unregister(void) |
|
{ |
|
saa7134_ts_unregister(&dvb_ops); |
|
} |
|
|
|
module_init(dvb_register); |
|
module_exit(dvb_unregister);
|
|
|