forked from Qortal/Brooklyn
You can not select more than 25 topics
Topics must start with a letter or number, can include dashes ('-') and can be up to 35 characters long.
843 lines
17 KiB
843 lines
17 KiB
// SPDX-License-Identifier: (GPL-2.0+ OR MIT) |
|
/* |
|
* Copyright (c) 2017 T-Chip Intelligent Technology Co., Ltd |
|
*/ |
|
|
|
/dts-v1/; |
|
#include <dt-bindings/input/linux-event-codes.h> |
|
#include <dt-bindings/pwm/pwm.h> |
|
#include "rk3399.dtsi" |
|
#include "rk3399-opp.dtsi" |
|
|
|
/ { |
|
model = "Firefly ROC-RK3399-PC Board"; |
|
compatible = "firefly,roc-rk3399-pc", "rockchip,rk3399"; |
|
|
|
aliases { |
|
mmc0 = &sdmmc; |
|
mmc1 = &sdhci; |
|
}; |
|
|
|
chosen { |
|
stdout-path = "serial2:1500000n8"; |
|
}; |
|
|
|
backlight: backlight { |
|
compatible = "pwm-backlight"; |
|
pwms = <&pwm0 0 25000 0>; |
|
}; |
|
|
|
clkin_gmac: external-gmac-clock { |
|
compatible = "fixed-clock"; |
|
clock-frequency = <125000000>; |
|
clock-output-names = "clkin_gmac"; |
|
#clock-cells = <0>; |
|
}; |
|
|
|
adc-keys { |
|
compatible = "adc-keys"; |
|
io-channels = <&saradc 1>; |
|
io-channel-names = "buttons"; |
|
keyup-threshold-microvolt = <1500000>; |
|
poll-interval = <100>; |
|
|
|
recovery { |
|
label = "Recovery"; |
|
linux,code = <KEY_VENDOR>; |
|
press-threshold-microvolt = <18000>; |
|
}; |
|
}; |
|
|
|
gpio-keys { |
|
compatible = "gpio-keys"; |
|
autorepeat; |
|
pinctrl-names = "default"; |
|
pinctrl-0 = <&pwr_key_l>; |
|
|
|
power { |
|
debounce-interval = <100>; |
|
gpios = <&gpio0 RK_PA5 GPIO_ACTIVE_LOW>; |
|
label = "GPIO Key Power"; |
|
linux,code = <KEY_POWER>; |
|
wakeup-source; |
|
}; |
|
}; |
|
|
|
ir-receiver { |
|
compatible = "gpio-ir-receiver"; |
|
gpios = <&gpio0 RK_PA6 GPIO_ACTIVE_LOW>; |
|
pinctrl-names = "default"; |
|
pinctrl-0 = <&ir_int>; |
|
}; |
|
|
|
leds { |
|
compatible = "gpio-leds"; |
|
pinctrl-names = "default"; |
|
pinctrl-0 = <&work_led_pin>, <&diy_led_pin>, <&yellow_led_pin>; |
|
|
|
work_led: led-0 { |
|
label = "green:work"; |
|
gpios = <&gpio2 RK_PD3 GPIO_ACTIVE_HIGH>; |
|
default-state = "on"; |
|
linux,default-trigger = "heartbeat"; |
|
}; |
|
|
|
diy_led: led-1 { |
|
label = "red:diy"; |
|
gpios = <&gpio0 RK_PB5 GPIO_ACTIVE_HIGH>; |
|
default-state = "off"; |
|
linux,default-trigger = "mmc2"; |
|
}; |
|
|
|
yellow_led: led-2 { |
|
label = "yellow:yellow-led"; |
|
gpios = <&gpio0 RK_PA2 GPIO_ACTIVE_HIGH>; |
|
default-state = "off"; |
|
linux,default-trigger = "mmc1"; |
|
}; |
|
}; |
|
|
|
sdio_pwrseq: sdio-pwrseq { |
|
compatible = "mmc-pwrseq-simple"; |
|
clocks = <&rk808 1>; |
|
clock-names = "ext_clock"; |
|
pinctrl-names = "default"; |
|
pinctrl-0 = <&wifi_enable_h>; |
|
|
|
/* |
|
* On the module itself this is one of these (depending |
|
* on the actual card populated): |
|
* - SDIO_RESET_L_WL_REG_ON |
|
* - PDN (power down when low) |
|
*/ |
|
reset-gpios = <&gpio0 RK_PB2 GPIO_ACTIVE_LOW>; |
|
}; |
|
|
|
vcc_vbus_typec0: vcc-vbus-typec0 { |
|
compatible = "regulator-fixed"; |
|
regulator-name = "vcc_vbus_typec0"; |
|
regulator-always-on; |
|
regulator-boot-on; |
|
regulator-min-microvolt = <5000000>; |
|
regulator-max-microvolt = <5000000>; |
|
}; |
|
|
|
sys_12v: sys-12v { |
|
compatible = "regulator-fixed"; |
|
regulator-name = "sys_12v"; |
|
regulator-always-on; |
|
regulator-boot-on; |
|
vin-supply = <&dc_12v>; |
|
}; |
|
|
|
/* switched by pmic_sleep */ |
|
vcc1v8_s3: vcca1v8_s3: vcc1v8-s3 { |
|
compatible = "regulator-fixed"; |
|
regulator-name = "vcc1v8_s3"; |
|
regulator-always-on; |
|
regulator-boot-on; |
|
regulator-min-microvolt = <1800000>; |
|
regulator-max-microvolt = <1800000>; |
|
vin-supply = <&vcc_1v8>; |
|
}; |
|
|
|
vcc3v0_sd: vcc3v0-sd { |
|
compatible = "regulator-fixed"; |
|
enable-active-high; |
|
gpio = <&gpio4 RK_PD6 GPIO_ACTIVE_HIGH>; |
|
pinctrl-names = "default"; |
|
pinctrl-0 = <&vcc3v0_sd_en>; |
|
regulator-name = "vcc3v0_sd"; |
|
regulator-boot-on; |
|
regulator-min-microvolt = <3000000>; |
|
regulator-max-microvolt = <3000000>; |
|
vin-supply = <&vcc3v3_sys>; |
|
}; |
|
|
|
vcc3v3_sys: vcc3v3-sys { |
|
compatible = "regulator-fixed"; |
|
regulator-name = "vcc3v3_sys"; |
|
regulator-always-on; |
|
regulator-boot-on; |
|
regulator-min-microvolt = <3300000>; |
|
regulator-max-microvolt = <3300000>; |
|
vin-supply = <&sys_12v>; |
|
}; |
|
|
|
vcca_0v9: vcca-0v9 { |
|
compatible = "regulator-fixed"; |
|
regulator-name = "vcca_0v9"; |
|
regulator-always-on; |
|
regulator-boot-on; |
|
regulator-min-microvolt = <900000>; |
|
regulator-max-microvolt = <900000>; |
|
vin-supply = <&vcc3v3_sys>; |
|
}; |
|
|
|
/* Actually 3 regulators (host0, 1, 2) controlled by the same gpio */ |
|
vcc5v0_host: vcc5v0-host-regulator { |
|
compatible = "regulator-fixed"; |
|
enable-active-high; |
|
gpio = <&gpio1 RK_PA0 GPIO_ACTIVE_HIGH>; |
|
pinctrl-names = "default"; |
|
pinctrl-0 = <&vcc5v0_host_en &hub_rst>; |
|
regulator-name = "vcc5v0_host"; |
|
vin-supply = <&vcc_sys>; |
|
}; |
|
|
|
vcc_vbus_typec1: vcc-vbus-typec1 { |
|
compatible = "regulator-fixed"; |
|
enable-active-high; |
|
gpio = <&gpio1 RK_PB5 GPIO_ACTIVE_HIGH>; |
|
pinctrl-names = "default"; |
|
pinctrl-0 = <&vcc_vbus_typec1_en>; |
|
regulator-name = "vcc_vbus_typec1"; |
|
regulator-always-on; |
|
vin-supply = <&vcc_sys>; |
|
}; |
|
|
|
vcc_sys: vcc-sys { |
|
compatible = "regulator-fixed"; |
|
enable-active-high; |
|
gpio = <&gpio2 RK_PA6 GPIO_ACTIVE_HIGH>; |
|
pinctrl-names = "default"; |
|
pinctrl-0 = <&vcc_sys_en>; |
|
regulator-name = "vcc_sys"; |
|
regulator-boot-on; |
|
regulator-min-microvolt = <5000000>; |
|
regulator-max-microvolt = <5000000>; |
|
vin-supply = <&sys_12v>; |
|
}; |
|
|
|
vdd_log: vdd-log { |
|
compatible = "pwm-regulator"; |
|
pwms = <&pwm2 0 25000 1>; |
|
regulator-name = "vdd_log"; |
|
regulator-always-on; |
|
regulator-boot-on; |
|
regulator-min-microvolt = <450000>; |
|
regulator-max-microvolt = <1400000>; |
|
pwm-supply = <&vcc3v3_sys>; |
|
}; |
|
}; |
|
|
|
&cpu_l0 { |
|
cpu-supply = <&vdd_cpu_l>; |
|
}; |
|
|
|
&cpu_l1 { |
|
cpu-supply = <&vdd_cpu_l>; |
|
}; |
|
|
|
&cpu_l2 { |
|
cpu-supply = <&vdd_cpu_l>; |
|
}; |
|
|
|
&cpu_l3 { |
|
cpu-supply = <&vdd_cpu_l>; |
|
}; |
|
|
|
&cpu_b0 { |
|
cpu-supply = <&vdd_cpu_b>; |
|
}; |
|
|
|
&cpu_b1 { |
|
cpu-supply = <&vdd_cpu_b>; |
|
}; |
|
|
|
&emmc_phy { |
|
status = "okay"; |
|
}; |
|
|
|
&gmac { |
|
assigned-clocks = <&cru SCLK_RMII_SRC>; |
|
assigned-clock-parents = <&clkin_gmac>; |
|
clock_in_out = "input"; |
|
phy-supply = <&vcc_lan>; |
|
phy-mode = "rgmii"; |
|
pinctrl-names = "default"; |
|
pinctrl-0 = <&rgmii_pins>; |
|
snps,reset-gpio = <&gpio3 RK_PB7 GPIO_ACTIVE_LOW>; |
|
snps,reset-active-low; |
|
snps,reset-delays-us = <0 10000 50000>; |
|
tx_delay = <0x28>; |
|
rx_delay = <0x11>; |
|
status = "okay"; |
|
}; |
|
|
|
&gpu { |
|
mali-supply = <&vdd_gpu>; |
|
status = "okay"; |
|
}; |
|
|
|
&hdmi { |
|
ddc-i2c-bus = <&i2c3>; |
|
pinctrl-names = "default"; |
|
pinctrl-0 = <&hdmi_cec>; |
|
status = "okay"; |
|
}; |
|
|
|
&hdmi_sound { |
|
status = "okay"; |
|
}; |
|
|
|
&i2c0 { |
|
clock-frequency = <400000>; |
|
i2c-scl-rising-time-ns = <168>; |
|
i2c-scl-falling-time-ns = <4>; |
|
status = "okay"; |
|
|
|
rk808: pmic@1b { |
|
compatible = "rockchip,rk808"; |
|
reg = <0x1b>; |
|
interrupt-parent = <&gpio1>; |
|
interrupts = <21 IRQ_TYPE_LEVEL_LOW>; |
|
#clock-cells = <1>; |
|
clock-output-names = "xin32k", "rk808-clkout2"; |
|
pinctrl-names = "default"; |
|
pinctrl-0 = <&pmic_int_l>; |
|
rockchip,system-power-controller; |
|
wakeup-source; |
|
|
|
vcc1-supply = <&vcc3v3_sys>; |
|
vcc2-supply = <&vcc3v3_sys>; |
|
vcc3-supply = <&vcc3v3_sys>; |
|
vcc4-supply = <&vcc3v3_sys>; |
|
vcc6-supply = <&vcc3v3_sys>; |
|
vcc7-supply = <&vcc3v3_sys>; |
|
vcc8-supply = <&vcc3v3_sys>; |
|
vcc9-supply = <&vcc3v3_sys>; |
|
vcc10-supply = <&vcc3v3_sys>; |
|
vcc11-supply = <&vcc3v3_sys>; |
|
vcc12-supply = <&vcc3v3_sys>; |
|
vcc13-supply = <&vcc3v3_sys>; |
|
vcc14-supply = <&vcc3v3_sys>; |
|
vddio-supply = <&vcc_3v0>; |
|
|
|
regulators { |
|
vdd_center: DCDC_REG1 { |
|
regulator-name = "vdd_center"; |
|
regulator-always-on; |
|
regulator-boot-on; |
|
regulator-min-microvolt = <750000>; |
|
regulator-max-microvolt = <1350000>; |
|
regulator-ramp-delay = <6001>; |
|
regulator-state-mem { |
|
regulator-off-in-suspend; |
|
}; |
|
}; |
|
|
|
vdd_cpu_l: DCDC_REG2 { |
|
regulator-name = "vdd_cpu_l"; |
|
regulator-always-on; |
|
regulator-boot-on; |
|
regulator-min-microvolt = <750000>; |
|
regulator-max-microvolt = <1350000>; |
|
regulator-ramp-delay = <6001>; |
|
regulator-state-mem { |
|
regulator-off-in-suspend; |
|
}; |
|
}; |
|
|
|
vcc_ddr: DCDC_REG3 { |
|
regulator-name = "vcc_ddr"; |
|
regulator-always-on; |
|
regulator-boot-on; |
|
regulator-state-mem { |
|
regulator-on-in-suspend; |
|
}; |
|
}; |
|
|
|
vcc_1v8: DCDC_REG4 { |
|
regulator-name = "vcc_1v8"; |
|
regulator-always-on; |
|
regulator-boot-on; |
|
regulator-min-microvolt = <1800000>; |
|
regulator-max-microvolt = <1800000>; |
|
regulator-state-mem { |
|
regulator-on-in-suspend; |
|
regulator-suspend-microvolt = <1800000>; |
|
}; |
|
}; |
|
|
|
vcca1v8_codec: LDO_REG1 { |
|
regulator-name = "vcca1v8_codec"; |
|
regulator-always-on; |
|
regulator-boot-on; |
|
regulator-min-microvolt = <1800000>; |
|
regulator-max-microvolt = <1800000>; |
|
regulator-state-mem { |
|
regulator-off-in-suspend; |
|
}; |
|
}; |
|
|
|
vcc1v8_hdmi: LDO_REG2 { |
|
regulator-name = "vcc1v8_hdmi"; |
|
regulator-always-on; |
|
regulator-boot-on; |
|
regulator-min-microvolt = <1800000>; |
|
regulator-max-microvolt = <1800000>; |
|
regulator-state-mem { |
|
regulator-off-in-suspend; |
|
}; |
|
}; |
|
|
|
vcc1v8_pmu: LDO_REG3 { |
|
regulator-name = "vcc1v8_pmu"; |
|
regulator-always-on; |
|
regulator-boot-on; |
|
regulator-min-microvolt = <1800000>; |
|
regulator-max-microvolt = <1800000>; |
|
regulator-state-mem { |
|
regulator-on-in-suspend; |
|
regulator-suspend-microvolt = <1800000>; |
|
}; |
|
}; |
|
|
|
vcc_sdio: LDO_REG4 { |
|
regulator-name = "vcc_sdio"; |
|
regulator-always-on; |
|
regulator-boot-on; |
|
regulator-min-microvolt = <1800000>; |
|
regulator-max-microvolt = <3000000>; |
|
regulator-state-mem { |
|
regulator-on-in-suspend; |
|
regulator-suspend-microvolt = <3000000>; |
|
}; |
|
}; |
|
|
|
vcca3v0_codec: LDO_REG5 { |
|
regulator-name = "vcca3v0_codec"; |
|
regulator-always-on; |
|
regulator-boot-on; |
|
regulator-min-microvolt = <3000000>; |
|
regulator-max-microvolt = <3000000>; |
|
regulator-state-mem { |
|
regulator-off-in-suspend; |
|
}; |
|
}; |
|
|
|
vcc_1v5: LDO_REG6 { |
|
regulator-name = "vcc_1v5"; |
|
regulator-always-on; |
|
regulator-boot-on; |
|
regulator-min-microvolt = <1500000>; |
|
regulator-max-microvolt = <1500000>; |
|
regulator-state-mem { |
|
regulator-on-in-suspend; |
|
regulator-suspend-microvolt = <1500000>; |
|
}; |
|
}; |
|
|
|
vcca0v9_hdmi: LDO_REG7 { |
|
regulator-name = "vcca0v9_hdmi"; |
|
regulator-always-on; |
|
regulator-boot-on; |
|
regulator-min-microvolt = <900000>; |
|
regulator-max-microvolt = <900000>; |
|
regulator-state-mem { |
|
regulator-off-in-suspend; |
|
}; |
|
}; |
|
|
|
vcc_3v0: LDO_REG8 { |
|
regulator-name = "vcc_3v0"; |
|
regulator-always-on; |
|
regulator-boot-on; |
|
regulator-min-microvolt = <3000000>; |
|
regulator-max-microvolt = <3000000>; |
|
regulator-state-mem { |
|
regulator-on-in-suspend; |
|
regulator-suspend-microvolt = <3000000>; |
|
}; |
|
}; |
|
|
|
vcc3v3_s3: vcc_lan: SWITCH_REG1 { |
|
regulator-name = "vcc3v3_s3"; |
|
regulator-always-on; |
|
regulator-boot-on; |
|
regulator-state-mem { |
|
regulator-off-in-suspend; |
|
}; |
|
}; |
|
|
|
vcc3v3_s0: SWITCH_REG2 { |
|
regulator-name = "vcc3v3_s0"; |
|
regulator-always-on; |
|
regulator-boot-on; |
|
regulator-state-mem { |
|
regulator-off-in-suspend; |
|
}; |
|
}; |
|
}; |
|
}; |
|
|
|
vdd_cpu_b: regulator@40 { |
|
compatible = "silergy,syr827"; |
|
reg = <0x40>; |
|
fcs,suspend-voltage-selector = <1>; |
|
pinctrl-names = "default"; |
|
pinctrl-0 = <&vsel1_pin>; |
|
regulator-name = "vdd_cpu_b"; |
|
regulator-min-microvolt = <712500>; |
|
regulator-max-microvolt = <1500000>; |
|
regulator-ramp-delay = <1000>; |
|
regulator-always-on; |
|
regulator-boot-on; |
|
vin-supply = <&vcc3v3_sys>; |
|
|
|
regulator-state-mem { |
|
regulator-off-in-suspend; |
|
}; |
|
}; |
|
|
|
vdd_gpu: regulator@41 { |
|
compatible = "silergy,syr828"; |
|
reg = <0x41>; |
|
fcs,suspend-voltage-selector = <1>; |
|
pinctrl-names = "default"; |
|
pinctrl-0 = <&vsel2_pin>; |
|
regulator-name = "vdd_gpu"; |
|
regulator-min-microvolt = <712500>; |
|
regulator-max-microvolt = <1500000>; |
|
regulator-ramp-delay = <1000>; |
|
regulator-always-on; |
|
regulator-boot-on; |
|
vin-supply = <&vcc3v3_sys>; |
|
|
|
regulator-state-mem { |
|
regulator-off-in-suspend; |
|
}; |
|
}; |
|
}; |
|
|
|
&i2c1 { |
|
i2c-scl-rising-time-ns = <300>; |
|
i2c-scl-falling-time-ns = <15>; |
|
status = "okay"; |
|
}; |
|
|
|
&i2c3 { |
|
i2c-scl-rising-time-ns = <450>; |
|
i2c-scl-falling-time-ns = <15>; |
|
status = "okay"; |
|
}; |
|
|
|
&i2c4 { |
|
i2c-scl-rising-time-ns = <600>; |
|
i2c-scl-falling-time-ns = <20>; |
|
status = "okay"; |
|
|
|
fusb1: usb-typec@22 { |
|
compatible = "fcs,fusb302"; |
|
reg = <0x22>; |
|
interrupt-parent = <&gpio1>; |
|
interrupts = <1 IRQ_TYPE_LEVEL_LOW>; |
|
pinctrl-names = "default"; |
|
pinctrl-0 = <&fusb1_int>; |
|
vbus-supply = <&vcc_vbus_typec1>; |
|
status = "okay"; |
|
}; |
|
}; |
|
|
|
&i2c7 { |
|
i2c-scl-rising-time-ns = <600>; |
|
i2c-scl-falling-time-ns = <20>; |
|
status = "okay"; |
|
|
|
fusb0: usb-typec@22 { |
|
compatible = "fcs,fusb302"; |
|
reg = <0x22>; |
|
interrupt-parent = <&gpio1>; |
|
interrupts = <2 IRQ_TYPE_LEVEL_LOW>; |
|
pinctrl-names = "default"; |
|
pinctrl-0 = <&fusb0_int>; |
|
vbus-supply = <&vcc_vbus_typec0>; |
|
status = "okay"; |
|
}; |
|
|
|
mp8859: regulator@66 { |
|
compatible = "mps,mp8859"; |
|
reg = <0x66>; |
|
dc_12v: mp8859_dcdc { |
|
regulator-name = "dc_12v"; |
|
regulator-min-microvolt = <12000000>; |
|
regulator-max-microvolt = <12000000>; |
|
regulator-always-on; |
|
regulator-boot-on; |
|
vin-supply = <&vcc_vbus_typec0>; |
|
|
|
regulator-state-mem { |
|
regulator-on-in-suspend; |
|
regulator-suspend-microvolt = <12000000>; |
|
}; |
|
}; |
|
}; |
|
}; |
|
|
|
&i2s0 { |
|
rockchip,playback-channels = <8>; |
|
rockchip,capture-channels = <8>; |
|
status = "okay"; |
|
}; |
|
|
|
&i2s1 { |
|
rockchip,playback-channels = <2>; |
|
rockchip,capture-channels = <2>; |
|
status = "okay"; |
|
}; |
|
|
|
&i2s2 { |
|
status = "okay"; |
|
}; |
|
|
|
&io_domains { |
|
audio-supply = <&vcca1v8_codec>; |
|
bt656-supply = <&vcc_3v0>; |
|
gpio1830-supply = <&vcc_3v0>; |
|
sdmmc-supply = <&vcc_sdio>; |
|
status = "okay"; |
|
}; |
|
|
|
&pmu_io_domains { |
|
pmu1830-supply = <&vcc_3v0>; |
|
status = "okay"; |
|
}; |
|
|
|
&pinctrl { |
|
buttons { |
|
pwr_key_l: pwr-key-l { |
|
rockchip,pins = <0 RK_PA5 RK_FUNC_GPIO &pcfg_pull_up>; |
|
}; |
|
}; |
|
|
|
ir { |
|
ir_int: ir-int { |
|
rockchip,pins = <0 RK_PA6 RK_FUNC_GPIO &pcfg_pull_none>; |
|
}; |
|
}; |
|
|
|
lcd-panel { |
|
lcd_panel_reset: lcd-panel-reset { |
|
rockchip,pins = <4 RK_PD5 RK_FUNC_GPIO &pcfg_pull_up>; |
|
}; |
|
}; |
|
|
|
leds { |
|
diy_led_pin: diy-led-pin { |
|
rockchip,pins = <0 RK_PB5 RK_FUNC_GPIO &pcfg_pull_none>; |
|
}; |
|
|
|
work_led_pin: work-led-pin { |
|
rockchip,pins = <2 RK_PD3 RK_FUNC_GPIO &pcfg_pull_none>; |
|
}; |
|
|
|
yellow_led_pin: yellow-led-pin { |
|
rockchip,pins = <0 RK_PA2 RK_FUNC_GPIO &pcfg_pull_none>; |
|
}; |
|
}; |
|
|
|
pmic { |
|
vsel1_pin: vsel1-pin { |
|
rockchip,pins = <1 RK_PC2 RK_FUNC_GPIO &pcfg_pull_down>; |
|
}; |
|
|
|
vsel2_pin: vsel2-pin { |
|
rockchip,pins = <1 RK_PB6 RK_FUNC_GPIO &pcfg_pull_down>; |
|
}; |
|
}; |
|
|
|
sdio-pwrseq { |
|
wifi_enable_h: wifi-enable-h { |
|
rockchip,pins = <0 RK_PB2 RK_FUNC_GPIO &pcfg_pull_none>; |
|
}; |
|
}; |
|
|
|
sdmmc { |
|
vcc3v0_sd_en: vcc3v0-sd-en { |
|
rockchip,pins = <4 RK_PD6 RK_FUNC_GPIO &pcfg_pull_none>; |
|
}; |
|
}; |
|
|
|
pmic { |
|
pmic_int_l: pmic-int-l { |
|
rockchip,pins = <1 RK_PC5 RK_FUNC_GPIO &pcfg_pull_up>; |
|
}; |
|
}; |
|
|
|
usb2 { |
|
vcc5v0_host_en: vcc5v0-host-en { |
|
rockchip,pins = <1 RK_PA0 RK_FUNC_GPIO &pcfg_pull_none>; |
|
}; |
|
|
|
vcc_sys_en: vcc-sys-en { |
|
rockchip,pins = <2 RK_PA6 RK_FUNC_GPIO &pcfg_pull_none>; |
|
}; |
|
|
|
hub_rst: hub-rst { |
|
rockchip,pins = <2 RK_PA4 RK_FUNC_GPIO &pcfg_output_high>; |
|
}; |
|
}; |
|
|
|
usb-typec { |
|
vcc_vbus_typec1_en: vcc-vbus-typec1-en { |
|
rockchip,pins = <1 RK_PB5 RK_FUNC_GPIO &pcfg_pull_none>; |
|
}; |
|
}; |
|
|
|
fusb30x { |
|
fusb0_int: fusb0-int { |
|
rockchip,pins = <1 RK_PA2 RK_FUNC_GPIO &pcfg_pull_up>; |
|
}; |
|
|
|
fusb1_int: fusb1-int { |
|
rockchip,pins = <1 RK_PA1 RK_FUNC_GPIO &pcfg_pull_up>; |
|
}; |
|
}; |
|
}; |
|
|
|
&pwm0 { |
|
status = "okay"; |
|
}; |
|
|
|
&pwm2 { |
|
status = "okay"; |
|
}; |
|
|
|
&saradc { |
|
vref-supply = <&vcca1v8_s3>; |
|
status = "okay"; |
|
}; |
|
|
|
&sdmmc { |
|
bus-width = <4>; |
|
cap-sd-highspeed; |
|
cd-gpios = <&gpio0 RK_PA7 GPIO_ACTIVE_LOW>; |
|
disable-wp; |
|
max-frequency = <150000000>; |
|
pinctrl-names = "default"; |
|
pinctrl-0 = <&sdmmc_clk &sdmmc_cmd &sdmmc_bus4>; |
|
sd-uhs-sdr104; |
|
vmmc-supply = <&vcc3v0_sd>; |
|
vqmmc-supply = <&vcc_sdio>; |
|
status = "okay"; |
|
}; |
|
|
|
&sdhci { |
|
bus-width = <8>; |
|
non-removable; |
|
status = "okay"; |
|
}; |
|
|
|
&spi1 { |
|
status = "okay"; |
|
|
|
flash@0 { |
|
compatible = "jedec,spi-nor"; |
|
reg = <0>; |
|
spi-max-frequency = <10000000>; |
|
}; |
|
}; |
|
|
|
&tcphy0 { |
|
status = "okay"; |
|
}; |
|
|
|
&tcphy1 { |
|
status = "okay"; |
|
}; |
|
|
|
&tsadc { |
|
/* tshut mode 0:CRU 1:GPIO */ |
|
rockchip,hw-tshut-mode = <1>; |
|
/* tshut polarity 0:LOW 1:HIGH */ |
|
rockchip,hw-tshut-polarity = <1>; |
|
status = "okay"; |
|
}; |
|
|
|
&u2phy0 { |
|
status = "okay"; |
|
|
|
u2phy0_otg: otg-port { |
|
phy-supply = <&vcc_vbus_typec0>; |
|
status = "okay"; |
|
}; |
|
|
|
u2phy0_host: host-port { |
|
phy-supply = <&vcc5v0_host>; |
|
status = "okay"; |
|
}; |
|
}; |
|
|
|
&u2phy1 { |
|
status = "okay"; |
|
|
|
u2phy1_otg: otg-port { |
|
phy-supply = <&vcc_vbus_typec1>; |
|
status = "okay"; |
|
}; |
|
|
|
u2phy1_host: host-port { |
|
phy-supply = <&vcc5v0_host>; |
|
status = "okay"; |
|
}; |
|
}; |
|
|
|
&uart0 { |
|
pinctrl-names = "default"; |
|
pinctrl-0 = <&uart0_xfer &uart0_cts>; |
|
status = "okay"; |
|
}; |
|
|
|
&uart2 { |
|
status = "okay"; |
|
}; |
|
|
|
&usb_host0_ehci { |
|
status = "okay"; |
|
}; |
|
|
|
&usb_host0_ohci { |
|
status = "okay"; |
|
}; |
|
|
|
&usb_host1_ehci { |
|
status = "okay"; |
|
}; |
|
|
|
&usb_host1_ohci { |
|
status = "okay"; |
|
}; |
|
|
|
&usbdrd3_0 { |
|
status = "okay"; |
|
}; |
|
|
|
&usbdrd_dwc3_0 { |
|
status = "okay"; |
|
}; |
|
|
|
&usbdrd3_1 { |
|
status = "okay"; |
|
}; |
|
|
|
&usbdrd_dwc3_1 { |
|
status = "okay"; |
|
dr_mode = "host"; |
|
}; |
|
|
|
&vopb { |
|
status = "okay"; |
|
}; |
|
|
|
&vopb_mmu { |
|
status = "okay"; |
|
}; |
|
|
|
&vopl { |
|
status = "okay"; |
|
}; |
|
|
|
&vopl_mmu { |
|
status = "okay"; |
|
};
|
|
|