forked from Qortal/Brooklyn
You can not select more than 25 topics
Topics must start with a letter or number, can include dashes ('-') and can be up to 35 characters long.
1126 lines
22 KiB
1126 lines
22 KiB
// SPDX-License-Identifier: (GPL-2.0+ OR MIT) |
|
/* |
|
* Copyright (c) 2017 Fuzhou Rockchip Electronics Co., Ltd. |
|
* Copyright (c) 2018 Akash Gajjar <[email protected]> |
|
* Copyright (c) 2020 Tobias Schramm <[email protected]> |
|
*/ |
|
|
|
/dts-v1/; |
|
#include <dt-bindings/input/gpio-keys.h> |
|
#include <dt-bindings/input/linux-event-codes.h> |
|
#include <dt-bindings/pwm/pwm.h> |
|
#include <dt-bindings/usb/pd.h> |
|
#include <dt-bindings/leds/common.h> |
|
#include "rk3399.dtsi" |
|
#include "rk3399-opp.dtsi" |
|
|
|
/ { |
|
model = "Pine64 Pinebook Pro"; |
|
compatible = "pine64,pinebook-pro", "rockchip,rk3399"; |
|
|
|
aliases { |
|
mmc0 = &sdio0; |
|
mmc1 = &sdmmc; |
|
mmc2 = &sdhci; |
|
}; |
|
|
|
chosen { |
|
stdout-path = "serial2:1500000n8"; |
|
}; |
|
|
|
backlight: edp-backlight { |
|
compatible = "pwm-backlight"; |
|
power-supply = <&vcc_12v>; |
|
pwms = <&pwm0 0 740740 0>; |
|
}; |
|
|
|
bat: battery { |
|
compatible = "simple-battery"; |
|
charge-full-design-microamp-hours = <9800000>; |
|
voltage-max-design-microvolt = <4350000>; |
|
voltage-min-design-microvolt = <3000000>; |
|
}; |
|
|
|
edp_panel: edp-panel { |
|
compatible = "boe,nv140fhmn49"; |
|
backlight = <&backlight>; |
|
enable-gpios = <&gpio1 RK_PA0 GPIO_ACTIVE_HIGH>; |
|
pinctrl-names = "default"; |
|
pinctrl-0 = <&panel_en_pin>; |
|
power-supply = <&vcc3v3_panel>; |
|
|
|
ports { |
|
#address-cells = <1>; |
|
#size-cells = <0>; |
|
|
|
port@0 { |
|
reg = <0>; |
|
#address-cells = <1>; |
|
#size-cells = <0>; |
|
|
|
panel_in_edp: endpoint@0 { |
|
reg = <0>; |
|
remote-endpoint = <&edp_out_panel>; |
|
}; |
|
}; |
|
}; |
|
}; |
|
|
|
/* |
|
* Use separate nodes for gpio-keys to allow for selective deactivation |
|
* of wakeup sources via sysfs without disabling the whole key |
|
*/ |
|
gpio-key-lid { |
|
compatible = "gpio-keys"; |
|
pinctrl-names = "default"; |
|
pinctrl-0 = <&lidbtn_pin>; |
|
|
|
lid { |
|
debounce-interval = <20>; |
|
gpios = <&gpio1 RK_PA1 GPIO_ACTIVE_LOW>; |
|
label = "Lid"; |
|
linux,code = <SW_LID>; |
|
linux,input-type = <EV_SW>; |
|
wakeup-event-action = <EV_ACT_DEASSERTED>; |
|
wakeup-source; |
|
}; |
|
}; |
|
|
|
gpio-key-power { |
|
compatible = "gpio-keys"; |
|
pinctrl-names = "default"; |
|
pinctrl-0 = <&pwrbtn_pin>; |
|
|
|
power { |
|
debounce-interval = <20>; |
|
gpios = <&gpio0 RK_PA5 GPIO_ACTIVE_LOW>; |
|
label = "Power"; |
|
linux,code = <KEY_POWER>; |
|
wakeup-source; |
|
}; |
|
}; |
|
|
|
leds { |
|
compatible = "gpio-leds"; |
|
pinctrl-names = "default"; |
|
pinctrl-0 = <&pwr_led_pin &slp_led_pin>; |
|
|
|
green_led: led-0 { |
|
color = <LED_COLOR_ID_GREEN>; |
|
default-state = "on"; |
|
function = LED_FUNCTION_POWER; |
|
gpios = <&gpio0 RK_PB3 GPIO_ACTIVE_HIGH>; |
|
label = "green:power"; |
|
}; |
|
|
|
red_led: led-1 { |
|
color = <LED_COLOR_ID_RED>; |
|
default-state = "off"; |
|
function = LED_FUNCTION_STANDBY; |
|
gpios = <&gpio0 RK_PA2 GPIO_ACTIVE_HIGH>; |
|
label = "red:standby"; |
|
panic-indicator; |
|
retain-state-suspended; |
|
}; |
|
}; |
|
|
|
/* Power sequence for SDIO WiFi module */ |
|
sdio_pwrseq: sdio-pwrseq { |
|
compatible = "mmc-pwrseq-simple"; |
|
clocks = <&rk808 1>; |
|
clock-names = "ext_clock"; |
|
pinctrl-names = "default"; |
|
pinctrl-0 = <&wifi_enable_h_pin>; |
|
post-power-on-delay-ms = <100>; |
|
power-off-delay-us = <500000>; |
|
|
|
/* WL_REG_ON on module */ |
|
reset-gpios = <&gpio0 RK_PB2 GPIO_ACTIVE_LOW>; |
|
}; |
|
|
|
/* Audio components */ |
|
es8316-sound { |
|
compatible = "simple-audio-card"; |
|
pinctrl-names = "default"; |
|
pinctrl-0 = <&hp_det_pin>; |
|
simple-audio-card,name = "rockchip,es8316-codec"; |
|
simple-audio-card,format = "i2s"; |
|
simple-audio-card,mclk-fs = <256>; |
|
|
|
simple-audio-card,widgets = |
|
"Microphone", "Mic Jack", |
|
"Headphone", "Headphones", |
|
"Speaker", "Speaker"; |
|
simple-audio-card,routing = |
|
"MIC1", "Mic Jack", |
|
"Headphones", "HPOL", |
|
"Headphones", "HPOR", |
|
"Speaker Amplifier INL", "HPOL", |
|
"Speaker Amplifier INR", "HPOR", |
|
"Speaker", "Speaker Amplifier OUTL", |
|
"Speaker", "Speaker Amplifier OUTR"; |
|
|
|
simple-audio-card,hp-det-gpio = <&gpio0 RK_PB0 GPIO_ACTIVE_HIGH>; |
|
simple-audio-card,aux-devs = <&speaker_amp>; |
|
simple-audio-card,pin-switches = "Speaker"; |
|
|
|
simple-audio-card,cpu { |
|
sound-dai = <&i2s1>; |
|
}; |
|
|
|
simple-audio-card,codec { |
|
sound-dai = <&es8316>; |
|
}; |
|
}; |
|
|
|
speaker_amp: speaker-amplifier { |
|
compatible = "simple-audio-amplifier"; |
|
enable-gpios = <&gpio4 RK_PD3 GPIO_ACTIVE_HIGH>; |
|
sound-name-prefix = "Speaker Amplifier"; |
|
VCC-supply = <&pa_5v>; |
|
}; |
|
|
|
/* Power tree */ |
|
/* Root power source */ |
|
vcc_sysin: vcc-sysin { |
|
compatible = "regulator-fixed"; |
|
regulator-name = "vcc_sysin"; |
|
regulator-always-on; |
|
regulator-boot-on; |
|
}; |
|
|
|
/* Regulators supplied by vcc_sysin */ |
|
/* LCD backlight supply */ |
|
vcc_12v: vcc-12v { |
|
compatible = "regulator-fixed"; |
|
regulator-name = "vcc_12v"; |
|
regulator-always-on; |
|
regulator-boot-on; |
|
regulator-min-microvolt = <12000000>; |
|
regulator-max-microvolt = <12000000>; |
|
vin-supply = <&vcc_sysin>; |
|
|
|
regulator-state-mem { |
|
regulator-off-in-suspend; |
|
}; |
|
}; |
|
|
|
/* Main 3.3 V supply */ |
|
vcc3v3_sys: wifi_bat: vcc3v3-sys { |
|
compatible = "regulator-fixed"; |
|
regulator-name = "vcc3v3_sys"; |
|
regulator-always-on; |
|
regulator-boot-on; |
|
regulator-min-microvolt = <3300000>; |
|
regulator-max-microvolt = <3300000>; |
|
vin-supply = <&vcc_sysin>; |
|
|
|
regulator-state-mem { |
|
regulator-on-in-suspend; |
|
}; |
|
}; |
|
|
|
/* 5 V USB power supply */ |
|
vcc5v0_usb: pa_5v: vcc5v0-usb-regulator { |
|
compatible = "regulator-fixed"; |
|
enable-active-high; |
|
gpio = <&gpio1 RK_PB5 GPIO_ACTIVE_HIGH>; |
|
pinctrl-names = "default"; |
|
pinctrl-0 = <&pwr_5v_pin>; |
|
regulator-name = "vcc5v0_usb"; |
|
regulator-always-on; |
|
regulator-min-microvolt = <5000000>; |
|
regulator-max-microvolt = <5000000>; |
|
vin-supply = <&vcc_sysin>; |
|
|
|
regulator-state-mem { |
|
regulator-off-in-suspend; |
|
}; |
|
}; |
|
|
|
/* RK3399 logic supply */ |
|
vdd_log: vdd-log { |
|
compatible = "pwm-regulator"; |
|
pwms = <&pwm2 0 25000 1>; |
|
regulator-name = "vdd_log"; |
|
regulator-always-on; |
|
regulator-boot-on; |
|
regulator-min-microvolt = <800000>; |
|
regulator-max-microvolt = <1400000>; |
|
vin-supply = <&vcc_sysin>; |
|
|
|
regulator-state-mem { |
|
regulator-on-in-suspend; |
|
}; |
|
}; |
|
|
|
/* Regulators supplied by vcc3v3_sys */ |
|
/* 0.9 V supply, always on */ |
|
vcc_0v9: vcc-0v9 { |
|
compatible = "regulator-fixed"; |
|
regulator-name = "vcc_0v9"; |
|
regulator-always-on; |
|
regulator-boot-on; |
|
regulator-min-microvolt = <900000>; |
|
regulator-max-microvolt = <900000>; |
|
vin-supply = <&vcc3v3_sys>; |
|
}; |
|
|
|
/* S3 1.8 V supply, switched by vcc1v8_s3 */ |
|
vcca1v8_s3: vcc1v8-s3 { |
|
compatible = "regulator-fixed"; |
|
regulator-name = "vcca1v8_s3"; |
|
regulator-always-on; |
|
regulator-boot-on; |
|
regulator-min-microvolt = <1800000>; |
|
regulator-max-microvolt = <1800000>; |
|
vin-supply = <&vcc3v3_sys>; |
|
}; |
|
|
|
/* micro SD card power */ |
|
vcc3v0_sd: vcc3v0-sd { |
|
compatible = "regulator-fixed"; |
|
enable-active-high; |
|
gpio = <&gpio0 RK_PA1 GPIO_ACTIVE_HIGH>; |
|
pinctrl-names = "default"; |
|
pinctrl-0 = <&sdmmc0_pwr_h_pin>; |
|
regulator-name = "vcc3v0_sd"; |
|
regulator-always-on; |
|
regulator-min-microvolt = <3000000>; |
|
regulator-max-microvolt = <3000000>; |
|
vin-supply = <&vcc3v3_sys>; |
|
|
|
regulator-state-mem { |
|
regulator-off-in-suspend; |
|
}; |
|
}; |
|
|
|
/* LCD panel power, called VCC3V3_S0 in schematic */ |
|
vcc3v3_panel: vcc3v3-panel { |
|
compatible = "regulator-fixed"; |
|
enable-active-high; |
|
gpio = <&gpio1 RK_PC6 GPIO_ACTIVE_HIGH>; |
|
pinctrl-names = "default"; |
|
pinctrl-0 = <&lcdvcc_en_pin>; |
|
regulator-name = "vcc3v3_panel"; |
|
regulator-always-on; |
|
regulator-min-microvolt = <3300000>; |
|
regulator-max-microvolt = <3300000>; |
|
regulator-enable-ramp-delay = <100000>; |
|
vin-supply = <&vcc3v3_sys>; |
|
|
|
regulator-state-mem { |
|
regulator-off-in-suspend; |
|
}; |
|
}; |
|
|
|
/* M.2 adapter power, switched by vcc1v8_s3 */ |
|
vcc3v3_ssd: vcc3v3-ssd { |
|
compatible = "regulator-fixed"; |
|
regulator-name = "vcc3v3_ssd"; |
|
regulator-min-microvolt = <3300000>; |
|
regulator-max-microvolt = <3300000>; |
|
vin-supply = <&vcc3v3_sys>; |
|
}; |
|
|
|
/* Regulators supplied by vcc5v0_usb */ |
|
/* USB 3 port power supply regulator */ |
|
vcc5v0_otg: vcc5v0-otg { |
|
compatible = "regulator-fixed"; |
|
enable-active-high; |
|
gpio = <&gpio4 RK_PD2 GPIO_ACTIVE_HIGH>; |
|
pinctrl-names = "default"; |
|
pinctrl-0 = <&vcc5v0_host_en_pin>; |
|
regulator-name = "vcc5v0_otg"; |
|
regulator-always-on; |
|
regulator-min-microvolt = <5000000>; |
|
regulator-max-microvolt = <5000000>; |
|
vin-supply = <&vcc5v0_usb>; |
|
|
|
regulator-state-mem { |
|
regulator-off-in-suspend; |
|
}; |
|
}; |
|
|
|
/* Regulators supplied by vcc5v0_usb */ |
|
/* Type C port power supply regulator */ |
|
vbus_5vout: vbus_typec: vbus-5vout { |
|
compatible = "regulator-fixed"; |
|
enable-active-high; |
|
gpio = <&gpio1 RK_PA3 GPIO_ACTIVE_HIGH>; |
|
pinctrl-names = "default"; |
|
pinctrl-0 = <&vcc5v0_typec0_en_pin>; |
|
regulator-name = "vbus_5vout"; |
|
regulator-min-microvolt = <5000000>; |
|
regulator-max-microvolt = <5000000>; |
|
vin-supply = <&vcc5v0_usb>; |
|
|
|
regulator-state-mem { |
|
regulator-off-in-suspend; |
|
}; |
|
}; |
|
|
|
/* Regulators supplied by vcc_1v8 */ |
|
/* Primary 0.9 V LDO */ |
|
vcca0v9_s3: vcca0v9-s3 { |
|
compatible = "regulator-fixed"; |
|
regulator-name = "vcc0v9_s3"; |
|
regulator-min-microvolt = <5000000>; |
|
regulator-max-microvolt = <5000000>; |
|
vin-supply = <&vcc_1v8>; |
|
|
|
regulator-state-mem { |
|
regulator-on-in-suspend; |
|
}; |
|
}; |
|
|
|
mains_charger: dc-charger { |
|
compatible = "gpio-charger"; |
|
charger-type = "mains"; |
|
gpios = <&gpio4 RK_PD0 GPIO_ACTIVE_LOW>; |
|
|
|
/* Also triggered by USB charger */ |
|
pinctrl-names = "default"; |
|
pinctrl-0 = <&dc_det_pin>; |
|
}; |
|
}; |
|
|
|
&cdn_dp { |
|
status = "okay"; |
|
}; |
|
|
|
&cpu_b0 { |
|
cpu-supply = <&vdd_cpu_b>; |
|
}; |
|
|
|
&cpu_b1 { |
|
cpu-supply = <&vdd_cpu_b>; |
|
}; |
|
|
|
&cpu_l0 { |
|
cpu-supply = <&vdd_cpu_l>; |
|
}; |
|
|
|
&cpu_l1 { |
|
cpu-supply = <&vdd_cpu_l>; |
|
}; |
|
|
|
&cpu_l2 { |
|
cpu-supply = <&vdd_cpu_l>; |
|
}; |
|
|
|
&cpu_l3 { |
|
cpu-supply = <&vdd_cpu_l>; |
|
}; |
|
|
|
&edp { |
|
force-hpd; |
|
pinctrl-names = "default"; |
|
pinctrl-0 = <&edp_hpd>; |
|
status = "okay"; |
|
|
|
ports { |
|
edp_out: port@1 { |
|
reg = <1>; |
|
#address-cells = <1>; |
|
#size-cells = <0>; |
|
|
|
edp_out_panel: endpoint@0 { |
|
reg = <0>; |
|
remote-endpoint = <&panel_in_edp>; |
|
}; |
|
}; |
|
}; |
|
}; |
|
|
|
&emmc_phy { |
|
status = "okay"; |
|
}; |
|
|
|
&gpu { |
|
mali-supply = <&vdd_gpu>; |
|
status = "okay"; |
|
}; |
|
|
|
&hdmi_sound { |
|
status = "okay"; |
|
}; |
|
|
|
&i2c0 { |
|
clock-frequency = <400000>; |
|
i2c-scl-falling-time-ns = <4>; |
|
i2c-scl-rising-time-ns = <168>; |
|
status = "okay"; |
|
|
|
rk808: pmic@1b { |
|
compatible = "rockchip,rk808"; |
|
reg = <0x1b>; |
|
#clock-cells = <1>; |
|
clock-output-names = "xin32k", "rk808-clkout2"; |
|
interrupt-parent = <&gpio3>; |
|
interrupts = <10 IRQ_TYPE_LEVEL_LOW>; |
|
pinctrl-names = "default"; |
|
pinctrl-0 = <&pmic_int_l_pin>; |
|
rockchip,system-power-controller; |
|
wakeup-source; |
|
|
|
vcc1-supply = <&vcc_sysin>; |
|
vcc2-supply = <&vcc_sysin>; |
|
vcc3-supply = <&vcc_sysin>; |
|
vcc4-supply = <&vcc_sysin>; |
|
vcc6-supply = <&vcc_sysin>; |
|
vcc7-supply = <&vcc_sysin>; |
|
vcc8-supply = <&vcc3v3_sys>; |
|
vcc9-supply = <&vcc_sysin>; |
|
vcc10-supply = <&vcc_sysin>; |
|
vcc11-supply = <&vcc_sysin>; |
|
vcc12-supply = <&vcc3v3_sys>; |
|
vcc13-supply = <&vcc_sysin>; |
|
vcc14-supply = <&vcc_sysin>; |
|
|
|
regulators { |
|
/* rk3399 center logic supply */ |
|
vdd_center: DCDC_REG1 { |
|
regulator-name = "vdd_center"; |
|
regulator-always-on; |
|
regulator-boot-on; |
|
regulator-min-microvolt = <750000>; |
|
regulator-max-microvolt = <1350000>; |
|
regulator-ramp-delay = <6001>; |
|
|
|
regulator-state-mem { |
|
regulator-off-in-suspend; |
|
}; |
|
}; |
|
|
|
vdd_cpu_l: DCDC_REG2 { |
|
regulator-name = "vdd_cpu_l"; |
|
regulator-always-on; |
|
regulator-boot-on; |
|
regulator-min-microvolt = <750000>; |
|
regulator-max-microvolt = <1350000>; |
|
regulator-ramp-delay = <6001>; |
|
|
|
regulator-state-mem { |
|
regulator-off-in-suspend; |
|
}; |
|
}; |
|
|
|
vcc_ddr: DCDC_REG3 { |
|
regulator-name = "vcc_ddr"; |
|
regulator-always-on; |
|
regulator-boot-on; |
|
|
|
regulator-state-mem { |
|
regulator-on-in-suspend; |
|
}; |
|
}; |
|
|
|
vcc_1v8: vcc_wl: DCDC_REG4 { |
|
regulator-name = "vcc_1v8"; |
|
regulator-always-on; |
|
regulator-boot-on; |
|
regulator-min-microvolt = <1800000>; |
|
regulator-max-microvolt = <1800000>; |
|
|
|
regulator-state-mem { |
|
regulator-on-in-suspend; |
|
regulator-suspend-microvolt = <1800000>; |
|
}; |
|
}; |
|
|
|
/* not used */ |
|
LDO_REG1 { |
|
}; |
|
|
|
/* not used */ |
|
LDO_REG2 { |
|
}; |
|
|
|
vcc1v8_pmupll: LDO_REG3 { |
|
regulator-name = "vcc1v8_pmupll"; |
|
regulator-always-on; |
|
regulator-boot-on; |
|
regulator-min-microvolt = <1800000>; |
|
regulator-max-microvolt = <1800000>; |
|
|
|
regulator-state-mem { |
|
regulator-on-in-suspend; |
|
regulator-suspend-microvolt = <1800000>; |
|
}; |
|
}; |
|
|
|
vcc_sdio: LDO_REG4 { |
|
regulator-name = "vcc_sdio"; |
|
regulator-always-on; |
|
regulator-boot-on; |
|
regulator-min-microvolt = <1800000>; |
|
regulator-max-microvolt = <3000000>; |
|
|
|
regulator-state-mem { |
|
regulator-on-in-suspend; |
|
regulator-suspend-microvolt = <3000000>; |
|
}; |
|
}; |
|
|
|
vcca3v0_codec: LDO_REG5 { |
|
regulator-name = "vcca3v0_codec"; |
|
regulator-always-on; |
|
regulator-boot-on; |
|
regulator-min-microvolt = <3000000>; |
|
regulator-max-microvolt = <3000000>; |
|
|
|
regulator-state-mem { |
|
regulator-off-in-suspend; |
|
}; |
|
}; |
|
|
|
vcc_1v5: LDO_REG6 { |
|
regulator-name = "vcc_1v5"; |
|
regulator-always-on; |
|
regulator-boot-on; |
|
regulator-min-microvolt = <1500000>; |
|
regulator-max-microvolt = <1500000>; |
|
|
|
regulator-state-mem { |
|
regulator-on-in-suspend; |
|
regulator-suspend-microvolt = <1500000>; |
|
}; |
|
}; |
|
|
|
vcca1v8_codec: LDO_REG7 { |
|
regulator-name = "vcca1v8_codec"; |
|
regulator-always-on; |
|
regulator-boot-on; |
|
regulator-min-microvolt = <1800000>; |
|
regulator-max-microvolt = <1800000>; |
|
|
|
regulator-state-mem { |
|
regulator-off-in-suspend; |
|
}; |
|
}; |
|
|
|
vcc_3v0: LDO_REG8 { |
|
regulator-name = "vcc_3v0"; |
|
regulator-always-on; |
|
regulator-boot-on; |
|
regulator-min-microvolt = <3000000>; |
|
regulator-max-microvolt = <3000000>; |
|
|
|
regulator-state-mem { |
|
regulator-on-in-suspend; |
|
regulator-suspend-microvolt = <3000000>; |
|
}; |
|
}; |
|
|
|
vcc3v3_s3: SWITCH_REG1 { |
|
regulator-name = "vcc3v3_s3"; |
|
regulator-always-on; |
|
regulator-boot-on; |
|
|
|
regulator-state-mem { |
|
regulator-off-in-suspend; |
|
}; |
|
}; |
|
|
|
vcc3v3_s0: SWITCH_REG2 { |
|
regulator-name = "vcc3v3_s0"; |
|
regulator-always-on; |
|
regulator-boot-on; |
|
|
|
regulator-state-mem { |
|
regulator-off-in-suspend; |
|
}; |
|
}; |
|
}; |
|
}; |
|
|
|
vdd_cpu_b: regulator@40 { |
|
compatible = "silergy,syr827"; |
|
reg = <0x40>; |
|
fcs,suspend-voltage-selector = <1>; |
|
pinctrl-names = "default"; |
|
pinctrl-0 = <&vsel1_pin>; |
|
regulator-name = "vdd_cpu_b"; |
|
regulator-always-on; |
|
regulator-boot-on; |
|
regulator-min-microvolt = <712500>; |
|
regulator-max-microvolt = <1500000>; |
|
regulator-ramp-delay = <1000>; |
|
vin-supply = <&vcc_1v8>; |
|
|
|
regulator-state-mem { |
|
regulator-off-in-suspend; |
|
}; |
|
}; |
|
|
|
vdd_gpu: regulator@41 { |
|
compatible = "silergy,syr828"; |
|
reg = <0x41>; |
|
fcs,suspend-voltage-selector = <1>; |
|
pinctrl-names = "default"; |
|
pinctrl-0 = <&vsel2_pin>; |
|
regulator-name = "vdd_gpu"; |
|
regulator-always-on; |
|
regulator-boot-on; |
|
regulator-min-microvolt = <712500>; |
|
regulator-max-microvolt = <1500000>; |
|
regulator-ramp-delay = <1000>; |
|
vin-supply = <&vcc_1v8>; |
|
|
|
regulator-state-mem { |
|
regulator-off-in-suspend; |
|
}; |
|
}; |
|
}; |
|
|
|
&i2c1 { |
|
clock-frequency = <100000>; |
|
i2c-scl-falling-time-ns = <4>; |
|
i2c-scl-rising-time-ns = <168>; |
|
status = "okay"; |
|
|
|
es8316: es8316@11 { |
|
compatible = "everest,es8316"; |
|
reg = <0x11>; |
|
clocks = <&cru SCLK_I2S_8CH_OUT>; |
|
clock-names = "mclk"; |
|
#sound-dai-cells = <0>; |
|
}; |
|
}; |
|
|
|
&i2c3 { |
|
i2c-scl-falling-time-ns = <15>; |
|
i2c-scl-rising-time-ns = <450>; |
|
status = "okay"; |
|
}; |
|
|
|
&i2c4 { |
|
i2c-scl-falling-time-ns = <20>; |
|
i2c-scl-rising-time-ns = <600>; |
|
status = "okay"; |
|
|
|
fusb0: fusb30x@22 { |
|
compatible = "fcs,fusb302"; |
|
reg = <0x22>; |
|
interrupt-parent = <&gpio1>; |
|
interrupts = <RK_PA2 IRQ_TYPE_LEVEL_LOW>; |
|
pinctrl-names = "default"; |
|
pinctrl-0 = <&fusb0_int_pin>; |
|
vbus-supply = <&vbus_typec>; |
|
|
|
connector { |
|
compatible = "usb-c-connector"; |
|
data-role = "host"; |
|
label = "USB-C"; |
|
op-sink-microwatt = <1000000>; |
|
power-role = "dual"; |
|
sink-pdos = |
|
<PDO_FIXED(5000, 2500, PDO_FIXED_USB_COMM)>; |
|
source-pdos = |
|
<PDO_FIXED(5000, 1400, PDO_FIXED_USB_COMM)>; |
|
try-power-role = "sink"; |
|
|
|
ports { |
|
#address-cells = <1>; |
|
#size-cells = <0>; |
|
|
|
port@0 { |
|
reg = <0>; |
|
|
|
usbc_hs: endpoint { |
|
remote-endpoint = |
|
<&u2phy0_typec_hs>; |
|
}; |
|
}; |
|
|
|
port@1 { |
|
reg = <1>; |
|
|
|
usbc_ss: endpoint { |
|
remote-endpoint = |
|
<&tcphy0_typec_ss>; |
|
}; |
|
}; |
|
|
|
port@2 { |
|
reg = <2>; |
|
|
|
usbc_dp: endpoint { |
|
remote-endpoint = |
|
<&tcphy0_typec_dp>; |
|
}; |
|
}; |
|
}; |
|
}; |
|
}; |
|
|
|
cw2015@62 { |
|
compatible = "cellwise,cw2015"; |
|
reg = <0x62>; |
|
cellwise,battery-profile = /bits/ 8 < |
|
0x17 0x67 0x80 0x73 0x6E 0x6C 0x6B 0x63 |
|
0x77 0x51 0x5C 0x58 0x50 0x4C 0x48 0x36 |
|
0x15 0x0C 0x0C 0x19 0x5B 0x7D 0x6F 0x69 |
|
0x69 0x5B 0x0C 0x29 0x20 0x40 0x52 0x59 |
|
0x57 0x56 0x54 0x4F 0x3B 0x1F 0x7F 0x17 |
|
0x06 0x1A 0x30 0x5A 0x85 0x93 0x96 0x2D |
|
0x48 0x77 0x9C 0xB3 0x80 0x52 0x94 0xCB |
|
0x2F 0x00 0x64 0xA5 0xB5 0x11 0xF0 0x11 |
|
>; |
|
cellwise,monitor-interval-ms = <5000>; |
|
monitored-battery = <&bat>; |
|
power-supplies = <&mains_charger>, <&fusb0>; |
|
}; |
|
}; |
|
|
|
&i2s1 { |
|
pinctrl-names = "default"; |
|
pinctrl-0 = <&i2s_8ch_mclk_pin>, <&i2s1_2ch_bus>; |
|
rockchip,capture-channels = <8>; |
|
rockchip,playback-channels = <8>; |
|
status = "okay"; |
|
}; |
|
|
|
&io_domains { |
|
audio-supply = <&vcc_3v0>; |
|
gpio1830-supply = <&vcc_3v0>; |
|
sdmmc-supply = <&vcc_sdio>; |
|
status = "okay"; |
|
}; |
|
|
|
&pcie_phy { |
|
status = "okay"; |
|
}; |
|
|
|
&pcie0 { |
|
bus-scan-delay-ms = <1000>; |
|
ep-gpios = <&gpio2 RK_PD4 GPIO_ACTIVE_HIGH>; |
|
num-lanes = <4>; |
|
pinctrl-names = "default"; |
|
pinctrl-0 = <&pcie_clkreqn_cpm>; |
|
vpcie0v9-supply = <&vcca0v9_s3>; |
|
vpcie1v8-supply = <&vcca1v8_s3>; |
|
vpcie3v3-supply = <&vcc3v3_ssd>; |
|
status = "okay"; |
|
}; |
|
|
|
&pinctrl { |
|
buttons { |
|
pwrbtn_pin: pwrbtn-pin { |
|
rockchip,pins = <0 RK_PA5 RK_FUNC_GPIO &pcfg_pull_up>; |
|
}; |
|
|
|
lidbtn_pin: lidbtn-pin { |
|
rockchip,pins = <1 RK_PA1 RK_FUNC_GPIO &pcfg_pull_up>; |
|
}; |
|
}; |
|
|
|
dc-charger { |
|
dc_det_pin: dc-det-pin { |
|
rockchip,pins = <4 RK_PD0 RK_FUNC_GPIO &pcfg_pull_up>; |
|
}; |
|
}; |
|
|
|
es8316 { |
|
hp_det_pin: hp-det-pin { |
|
rockchip,pins = <0 RK_PB0 RK_FUNC_GPIO &pcfg_pull_up>; |
|
}; |
|
}; |
|
|
|
fusb302x { |
|
fusb0_int_pin: fusb0-int-pin { |
|
rockchip,pins = <1 RK_PA2 RK_FUNC_GPIO &pcfg_pull_up>; |
|
}; |
|
}; |
|
|
|
i2s1 { |
|
i2s_8ch_mclk_pin: i2s-8ch-mclk-pin { |
|
rockchip,pins = <4 RK_PA0 1 &pcfg_pull_none>; |
|
}; |
|
}; |
|
|
|
lcd-panel { |
|
lcdvcc_en_pin: lcdvcc-en-pin { |
|
rockchip,pins = <1 RK_PC6 RK_FUNC_GPIO &pcfg_pull_none>; |
|
}; |
|
|
|
panel_en_pin: panel-en-pin { |
|
rockchip,pins = <1 RK_PA0 RK_FUNC_GPIO &pcfg_pull_none>; |
|
}; |
|
|
|
lcd_panel_reset_pin: lcd-panel-reset-pin { |
|
rockchip,pins = <4 RK_PD6 RK_FUNC_GPIO &pcfg_pull_up>; |
|
}; |
|
}; |
|
|
|
leds { |
|
pwr_led_pin: pwr-led-pin { |
|
rockchip,pins = <0 RK_PB3 RK_FUNC_GPIO &pcfg_pull_none>; |
|
}; |
|
|
|
slp_led_pin: slp-led-pin { |
|
rockchip,pins = <0 RK_PA2 RK_FUNC_GPIO &pcfg_pull_none>; |
|
}; |
|
}; |
|
|
|
pmic { |
|
pmic_int_l_pin: pmic-int-l-pin { |
|
rockchip,pins = <3 RK_PB2 RK_FUNC_GPIO &pcfg_pull_up>; |
|
}; |
|
|
|
vsel1_pin: vsel1-pin { |
|
rockchip,pins = <1 RK_PC1 RK_FUNC_GPIO &pcfg_pull_down>; |
|
}; |
|
|
|
vsel2_pin: vsel2-pin { |
|
rockchip,pins = <1 RK_PB6 RK_FUNC_GPIO &pcfg_pull_down>; |
|
}; |
|
}; |
|
|
|
sdcard { |
|
sdmmc0_pwr_h_pin: sdmmc0-pwr-h-pin { |
|
rockchip,pins = <0 RK_PA1 RK_FUNC_GPIO &pcfg_pull_none>; |
|
}; |
|
|
|
}; |
|
|
|
sdio-pwrseq { |
|
wifi_enable_h_pin: wifi-enable-h-pin { |
|
rockchip,pins = <0 RK_PB2 RK_FUNC_GPIO &pcfg_pull_none>; |
|
}; |
|
}; |
|
|
|
usb-typec { |
|
vcc5v0_typec0_en_pin: vcc5v0-typec0-en-pin { |
|
rockchip,pins = <1 RK_PA3 RK_FUNC_GPIO &pcfg_pull_up>; |
|
}; |
|
}; |
|
|
|
usb2 { |
|
pwr_5v_pin: pwr-5v-pin { |
|
rockchip,pins = <1 RK_PB5 RK_FUNC_GPIO &pcfg_pull_none>; |
|
}; |
|
|
|
vcc5v0_host_en_pin: vcc5v0-host-en-pin { |
|
rockchip,pins = <4 RK_PD2 RK_FUNC_GPIO &pcfg_pull_none>; |
|
}; |
|
}; |
|
|
|
wireless-bluetooth { |
|
bt_wake_pin: bt-wake-pin { |
|
rockchip,pins = <2 RK_PD3 RK_FUNC_GPIO &pcfg_pull_none>; |
|
}; |
|
|
|
bt_host_wake_pin: bt-host-wake-pin { |
|
rockchip,pins = <0 RK_PA4 RK_FUNC_GPIO &pcfg_pull_none>; |
|
}; |
|
|
|
bt_reset_pin: bt-reset-pin { |
|
rockchip,pins = <0 RK_PB1 RK_FUNC_GPIO &pcfg_pull_none>; |
|
}; |
|
}; |
|
}; |
|
|
|
&pmu_io_domains { |
|
pmu1830-supply = <&vcc_3v0>; |
|
status = "okay"; |
|
}; |
|
|
|
&pwm0 { |
|
status = "okay"; |
|
}; |
|
|
|
&pwm2 { |
|
status = "okay"; |
|
}; |
|
|
|
&saradc { |
|
vref-supply = <&vcca1v8_s3>; |
|
status = "okay"; |
|
}; |
|
|
|
&sdmmc { |
|
bus-width = <4>; |
|
cap-mmc-highspeed; |
|
cap-sd-highspeed; |
|
cd-gpios = <&gpio0 RK_PA7 GPIO_ACTIVE_LOW>; |
|
disable-wp; |
|
pinctrl-names = "default"; |
|
pinctrl-0 = <&sdmmc_clk &sdmmc_cmd &sdmmc_bus4>; |
|
sd-uhs-sdr104; |
|
vmmc-supply = <&vcc3v0_sd>; |
|
vqmmc-supply = <&vcc_sdio>; |
|
status = "okay"; |
|
}; |
|
|
|
&sdio0 { |
|
bus-width = <4>; |
|
cap-sd-highspeed; |
|
cap-sdio-irq; |
|
keep-power-in-suspend; |
|
mmc-pwrseq = <&sdio_pwrseq>; |
|
non-removable; |
|
pinctrl-names = "default"; |
|
pinctrl-0 = <&sdio0_bus4 &sdio0_cmd &sdio0_clk>; |
|
sd-uhs-sdr104; |
|
status = "okay"; |
|
}; |
|
|
|
&sdhci { |
|
bus-width = <8>; |
|
mmc-hs200-1_8v; |
|
non-removable; |
|
status = "okay"; |
|
}; |
|
|
|
&spi1 { |
|
max-freq = <10000000>; |
|
status = "okay"; |
|
|
|
spiflash: flash@0 { |
|
compatible = "jedec,spi-nor"; |
|
reg = <0>; |
|
m25p,fast-read; |
|
spi-max-frequency = <10000000>; |
|
}; |
|
}; |
|
|
|
&tcphy0 { |
|
status = "okay"; |
|
}; |
|
|
|
&tcphy0_dp { |
|
port { |
|
tcphy0_typec_dp: endpoint { |
|
remote-endpoint = <&usbc_dp>; |
|
}; |
|
}; |
|
}; |
|
|
|
&tcphy0_usb3 { |
|
port { |
|
tcphy0_typec_ss: endpoint { |
|
remote-endpoint = <&usbc_ss>; |
|
}; |
|
}; |
|
}; |
|
|
|
&tcphy1 { |
|
status = "okay"; |
|
}; |
|
|
|
&tsadc { |
|
/* tshut mode 0:CRU 1:GPIO */ |
|
rockchip,hw-tshut-mode = <1>; |
|
/* tshut polarity 0:LOW 1:HIGH */ |
|
rockchip,hw-tshut-polarity = <1>; |
|
status = "okay"; |
|
}; |
|
|
|
&u2phy0 { |
|
status = "okay"; |
|
|
|
u2phy0_otg: otg-port { |
|
status = "okay"; |
|
}; |
|
|
|
u2phy0_host: host-port { |
|
phy-supply = <&vcc5v0_otg>; |
|
status = "okay"; |
|
}; |
|
|
|
port { |
|
u2phy0_typec_hs: endpoint { |
|
remote-endpoint = <&usbc_hs>; |
|
}; |
|
}; |
|
}; |
|
|
|
&u2phy1 { |
|
status = "okay"; |
|
|
|
u2phy1_otg: otg-port { |
|
status = "okay"; |
|
}; |
|
|
|
u2phy1_host: host-port { |
|
phy-supply = <&vcc5v0_otg>; |
|
status = "okay"; |
|
}; |
|
}; |
|
|
|
&uart0 { |
|
pinctrl-names = "default"; |
|
pinctrl-0 = <&uart0_xfer &uart0_cts &uart0_rts>; |
|
uart-has-rtscts; |
|
status = "okay"; |
|
|
|
bluetooth { |
|
compatible = "brcm,bcm4345c5"; |
|
clocks = <&rk808 1>; |
|
clock-names = "lpo"; |
|
device-wakeup-gpios = <&gpio2 RK_PD3 GPIO_ACTIVE_HIGH>; |
|
host-wakeup-gpios = <&gpio0 RK_PA4 GPIO_ACTIVE_HIGH>; |
|
max-speed = <1500000>; |
|
pinctrl-names = "default"; |
|
pinctrl-0 = <&bt_host_wake_pin &bt_wake_pin &bt_reset_pin>; |
|
shutdown-gpios = <&gpio0 RK_PB1 GPIO_ACTIVE_HIGH>; |
|
vbat-supply = <&wifi_bat>; |
|
vddio-supply = <&vcc_wl>; |
|
}; |
|
}; |
|
|
|
&uart2 { |
|
status = "okay"; |
|
}; |
|
|
|
&usb_host0_ehci { |
|
status = "okay"; |
|
}; |
|
|
|
&usb_host0_ohci { |
|
status = "okay"; |
|
}; |
|
|
|
&usb_host1_ehci { |
|
status = "okay"; |
|
}; |
|
|
|
&usb_host1_ohci { |
|
status = "okay"; |
|
}; |
|
|
|
&usbdrd3_0 { |
|
status = "okay"; |
|
}; |
|
|
|
&usbdrd_dwc3_0 { |
|
dr_mode = "host"; |
|
status = "okay"; |
|
}; |
|
|
|
&usbdrd3_1 { |
|
status = "okay"; |
|
}; |
|
|
|
&usbdrd_dwc3_1 { |
|
dr_mode = "host"; |
|
status = "okay"; |
|
}; |
|
|
|
&vopb { |
|
status = "okay"; |
|
}; |
|
|
|
&vopb_mmu { |
|
status = "okay"; |
|
}; |
|
|
|
&vopl { |
|
status = "okay"; |
|
}; |
|
|
|
&vopl_mmu { |
|
status = "okay"; |
|
};
|
|
|