forked from Qortal/Brooklyn
You can not select more than 25 topics
Topics must start with a letter or number, can include dashes ('-') and can be up to 35 characters long.
1209 lines
29 KiB
1209 lines
29 KiB
# SPDX-License-Identifier: GPL-2.0 |
|
# |
|
# SATA/PATA driver configuration |
|
# |
|
|
|
config HAVE_PATA_PLATFORM |
|
bool |
|
help |
|
This is an internal configuration node for any machine that |
|
uses pata-platform driver to enable the relevant driver in the |
|
configuration structure without having to submit endless patches |
|
to update the PATA_PLATFORM entry. |
|
|
|
menuconfig ATA |
|
tristate "Serial ATA and Parallel ATA drivers (libata)" |
|
depends on HAS_IOMEM |
|
depends on BLOCK |
|
select SCSI |
|
select GLOB |
|
help |
|
If you want to use an ATA hard disk, ATA tape drive, ATA CD-ROM or |
|
any other ATA device under Linux, say Y and make sure that you know |
|
the name of your ATA host adapter (the card inside your computer |
|
that "speaks" the ATA protocol, also called ATA controller), |
|
because you will be asked for it. |
|
|
|
NOTE: ATA enables basic SCSI support; *however*, |
|
'SCSI disk support', 'SCSI tape support', or |
|
'SCSI CDROM support' may also be needed, |
|
depending on your hardware configuration. |
|
|
|
if ATA |
|
|
|
config ATA_NONSTANDARD |
|
bool |
|
|
|
config SATA_HOST |
|
bool |
|
|
|
config PATA_TIMINGS |
|
bool |
|
|
|
config ATA_VERBOSE_ERROR |
|
bool "Verbose ATA error reporting" |
|
default y |
|
help |
|
This option adds parsing of ATA command descriptions and error bits |
|
in libata kernel output, making it easier to interpret. |
|
This option will enlarge the kernel by approx. 6KB. Disable it only |
|
if kernel size is more important than ease of debugging. |
|
|
|
If unsure, say Y. |
|
|
|
config ATA_FORCE |
|
bool "\"libata.force=\" kernel parameter support" if EXPERT |
|
default y |
|
help |
|
This option adds support for "libata.force=" kernel parameter for |
|
forcing configuration settings. |
|
|
|
For further information, please read |
|
<file:Documentation/admin-guide/kernel-parameters.txt>. |
|
|
|
This option will enlarge the kernel by approx. 3KB. Disable it if |
|
kernel size is more important than ability to override the default |
|
configuration settings. |
|
|
|
If unsure, say Y. |
|
|
|
config ATA_ACPI |
|
bool "ATA ACPI Support" |
|
depends on ACPI |
|
select PATA_TIMINGS |
|
default y |
|
help |
|
This option adds support for ATA-related ACPI objects. |
|
These ACPI objects add the ability to retrieve taskfiles |
|
from the ACPI BIOS and write them to the disk controller. |
|
These objects may be related to performance, security, |
|
power management, or other areas. |
|
You can disable this at kernel boot time by using the |
|
option libata.noacpi=1 |
|
|
|
config SATA_ZPODD |
|
bool "SATA Zero Power Optical Disc Drive (ZPODD) support" |
|
depends on ATA_ACPI && PM |
|
help |
|
This option adds support for SATA Zero Power Optical Disc |
|
Drive (ZPODD). It requires both the ODD and the platform |
|
support, and if enabled, will automatically power on/off the |
|
ODD when certain condition is satisfied. This does not impact |
|
end user's experience of the ODD, only power is saved when |
|
the ODD is not in use (i.e. no disc inside). |
|
|
|
If unsure, say N. |
|
|
|
config SATA_PMP |
|
bool "SATA Port Multiplier support" |
|
depends on SATA_HOST |
|
default y |
|
help |
|
This option adds support for SATA Port Multipliers |
|
(the SATA version of an ethernet hub, or SAS expander). |
|
|
|
if HAS_DMA |
|
|
|
comment "Controllers with non-SFF native interface" |
|
|
|
config SATA_AHCI |
|
tristate "AHCI SATA support" |
|
depends on PCI |
|
select SATA_HOST |
|
help |
|
This option enables support for AHCI Serial ATA. |
|
|
|
If unsure, say N. |
|
|
|
config SATA_MOBILE_LPM_POLICY |
|
int "Default SATA Link Power Management policy for mobile chipsets" |
|
range 0 4 |
|
default 0 |
|
depends on SATA_AHCI |
|
help |
|
Select the Default SATA Link Power Management (LPM) policy to use |
|
for mobile / laptop variants of chipsets / "South Bridges". |
|
|
|
The value set has the following meanings: |
|
0 => Keep firmware settings |
|
1 => Maximum performance |
|
2 => Medium power |
|
3 => Medium power with Device Initiated PM enabled |
|
4 => Minimum power |
|
|
|
Note "Minimum power" is known to cause issues, including disk |
|
corruption, with some disks and should not be used. |
|
|
|
config SATA_AHCI_PLATFORM |
|
tristate "Platform AHCI SATA support" |
|
select SATA_HOST |
|
help |
|
This option enables support for Platform AHCI Serial ATA |
|
controllers. |
|
|
|
If unsure, say N. |
|
|
|
config AHCI_BRCM |
|
tristate "Broadcom AHCI SATA support" |
|
depends on ARCH_BRCMSTB || BMIPS_GENERIC || ARCH_BCM_NSP || \ |
|
ARCH_BCM_63XX |
|
select SATA_HOST |
|
help |
|
This option enables support for the AHCI SATA3 controller found on |
|
Broadcom SoC's. |
|
|
|
If unsure, say N. |
|
|
|
config AHCI_DA850 |
|
tristate "DaVinci DA850 AHCI SATA support" |
|
depends on ARCH_DAVINCI_DA850 |
|
select SATA_HOST |
|
help |
|
This option enables support for the DaVinci DA850 SoC's |
|
onboard AHCI SATA. |
|
|
|
If unsure, say N. |
|
|
|
config AHCI_DM816 |
|
tristate "DaVinci DM816 AHCI SATA support" |
|
depends on ARCH_OMAP2PLUS |
|
select SATA_HOST |
|
help |
|
This option enables support for the DaVinci DM816 SoC's |
|
onboard AHCI SATA controller. |
|
|
|
If unsure, say N. |
|
|
|
config AHCI_ST |
|
tristate "ST AHCI SATA support" |
|
depends on ARCH_STI |
|
select SATA_HOST |
|
help |
|
This option enables support for ST AHCI SATA controller. |
|
|
|
If unsure, say N. |
|
|
|
config AHCI_IMX |
|
tristate "Freescale i.MX AHCI SATA support" |
|
depends on MFD_SYSCON && (ARCH_MXC || COMPILE_TEST) |
|
depends on (HWMON && (THERMAL || !THERMAL_OF)) || !HWMON |
|
select SATA_HOST |
|
help |
|
This option enables support for the Freescale i.MX SoC's |
|
onboard AHCI SATA. |
|
|
|
If unsure, say N. |
|
|
|
config AHCI_CEVA |
|
tristate "CEVA AHCI SATA support" |
|
depends on OF |
|
select SATA_HOST |
|
help |
|
This option enables support for the CEVA AHCI SATA. |
|
It can be found on the Xilinx Zynq UltraScale+ MPSoC. |
|
|
|
If unsure, say N. |
|
|
|
config AHCI_MTK |
|
tristate "MediaTek AHCI SATA support" |
|
depends on ARCH_MEDIATEK |
|
select MFD_SYSCON |
|
select SATA_HOST |
|
help |
|
This option enables support for the MediaTek SoC's |
|
onboard AHCI SATA controller. |
|
|
|
If unsure, say N. |
|
|
|
config AHCI_MVEBU |
|
tristate "Marvell EBU AHCI SATA support" |
|
depends on ARCH_MVEBU |
|
select SATA_HOST |
|
help |
|
This option enables support for the Marvebu EBU SoC's |
|
onboard AHCI SATA. |
|
|
|
If unsure, say N. |
|
|
|
config AHCI_OCTEON |
|
tristate "Cavium Octeon Soc Serial ATA" |
|
depends on SATA_AHCI_PLATFORM && CAVIUM_OCTEON_SOC |
|
default y |
|
help |
|
This option enables support for Cavium Octeon SoC Serial ATA. |
|
|
|
If unsure, say N. |
|
|
|
config AHCI_SUNXI |
|
tristate "Allwinner sunxi AHCI SATA support" |
|
depends on ARCH_SUNXI |
|
select SATA_HOST |
|
help |
|
This option enables support for the Allwinner sunxi SoC's |
|
onboard AHCI SATA. |
|
|
|
If unsure, say N. |
|
|
|
config AHCI_TEGRA |
|
tristate "NVIDIA Tegra AHCI SATA support" |
|
depends on ARCH_TEGRA |
|
select SATA_HOST |
|
help |
|
This option enables support for the NVIDIA Tegra SoC's |
|
onboard AHCI SATA. |
|
|
|
If unsure, say N. |
|
|
|
config AHCI_XGENE |
|
tristate "APM X-Gene 6.0Gbps AHCI SATA host controller support" |
|
depends on PHY_XGENE |
|
select SATA_HOST |
|
help |
|
This option enables support for APM X-Gene SoC SATA host controller. |
|
|
|
config AHCI_QORIQ |
|
tristate "Freescale QorIQ AHCI SATA support" |
|
depends on OF |
|
select SATA_HOST |
|
help |
|
This option enables support for the Freescale QorIQ AHCI SoC's |
|
onboard AHCI SATA. |
|
|
|
If unsure, say N. |
|
|
|
config SATA_FSL |
|
tristate "Freescale 3.0Gbps SATA support" |
|
depends on FSL_SOC |
|
select SATA_HOST |
|
help |
|
This option enables support for Freescale 3.0Gbps SATA controller. |
|
It can be found on MPC837x and MPC8315. |
|
|
|
If unsure, say N. |
|
|
|
config SATA_GEMINI |
|
tristate "Gemini SATA bridge support" |
|
depends on ARCH_GEMINI || COMPILE_TEST |
|
select SATA_HOST |
|
default ARCH_GEMINI |
|
help |
|
This enabled support for the FTIDE010 to SATA bridge |
|
found in Cortina Systems Gemini platform. |
|
|
|
If unsure, say N. |
|
|
|
config SATA_AHCI_SEATTLE |
|
tristate "AMD Seattle 6.0Gbps AHCI SATA host controller support" |
|
depends on ARCH_SEATTLE |
|
select SATA_HOST |
|
help |
|
This option enables support for AMD Seattle SATA host controller. |
|
|
|
If unsure, say N |
|
|
|
config SATA_INIC162X |
|
tristate "Initio 162x SATA support (Very Experimental)" |
|
depends on PCI |
|
select SATA_HOST |
|
help |
|
This option enables support for Initio 162x Serial ATA. |
|
|
|
config SATA_ACARD_AHCI |
|
tristate "ACard AHCI variant (ATP 8620)" |
|
depends on PCI |
|
select SATA_HOST |
|
help |
|
This option enables support for Acard. |
|
|
|
If unsure, say N. |
|
|
|
config SATA_SIL24 |
|
tristate "Silicon Image 3124/3132 SATA support" |
|
depends on PCI |
|
select SATA_HOST |
|
help |
|
This option enables support for Silicon Image 3124/3132 Serial ATA. |
|
|
|
If unsure, say N. |
|
|
|
endif # HAS_DMA |
|
|
|
config ATA_SFF |
|
bool "ATA SFF support (for legacy IDE and PATA)" |
|
default y |
|
help |
|
This option adds support for ATA controllers with SFF |
|
compliant or similar programming interface. |
|
|
|
SFF is the legacy IDE interface that has been around since |
|
the dawn of time. Almost all PATA controllers have an |
|
SFF interface. Many SATA controllers have an SFF interface |
|
when configured into a legacy compatibility mode. |
|
|
|
For users with exclusively modern controllers like AHCI, |
|
Silicon Image 3124, or Marvell 6440, you may choose to |
|
disable this unneeded SFF support. |
|
|
|
If unsure, say Y. |
|
|
|
if ATA_SFF |
|
|
|
comment "SFF controllers with custom DMA interface" |
|
|
|
config PDC_ADMA |
|
tristate "Pacific Digital ADMA support" |
|
depends on PCI |
|
help |
|
This option enables support for Pacific Digital ADMA controllers |
|
|
|
If unsure, say N. |
|
|
|
config PATA_OCTEON_CF |
|
tristate "OCTEON Boot Bus Compact Flash support" |
|
depends on CAVIUM_OCTEON_SOC |
|
select PATA_TIMINGS |
|
help |
|
This option enables a polled compact flash driver for use with |
|
compact flash cards attached to the OCTEON boot bus. |
|
|
|
If unsure, say N. |
|
|
|
config SATA_QSTOR |
|
tristate "Pacific Digital SATA QStor support" |
|
depends on PCI |
|
select SATA_HOST |
|
help |
|
This option enables support for Pacific Digital Serial ATA QStor. |
|
|
|
If unsure, say N. |
|
|
|
config SATA_SX4 |
|
tristate "Promise SATA SX4 support (Experimental)" |
|
depends on PCI |
|
select SATA_HOST |
|
help |
|
This option enables support for Promise Serial ATA SX4. |
|
|
|
If unsure, say N. |
|
|
|
config ATA_BMDMA |
|
bool "ATA BMDMA support" |
|
depends on HAS_DMA |
|
default y |
|
help |
|
This option adds support for SFF ATA controllers with BMDMA |
|
capability. BMDMA stands for bus-master DMA and is the |
|
de facto DMA interface for SFF controllers. |
|
|
|
If unsure, say Y. |
|
|
|
if ATA_BMDMA |
|
|
|
comment "SATA SFF controllers with BMDMA" |
|
|
|
config ATA_PIIX |
|
tristate "Intel ESB, ICH, PIIX3, PIIX4 PATA/SATA support" |
|
depends on PCI |
|
select SATA_HOST |
|
help |
|
This option enables support for ICH5/6/7/8 Serial ATA |
|
and support for PATA on the Intel ESB/ICH/PIIX3/PIIX4 series |
|
host controllers. |
|
|
|
If unsure, say N. |
|
|
|
config SATA_DWC |
|
tristate "DesignWare Cores SATA support" |
|
depends on DMADEVICES |
|
select GENERIC_PHY |
|
select SATA_HOST |
|
help |
|
This option enables support for the on-chip SATA controller of the |
|
AppliedMicro processor 460EX. |
|
|
|
If unsure, say N. |
|
|
|
config SATA_DWC_OLD_DMA |
|
bool "Support old device trees" |
|
depends on SATA_DWC |
|
select DW_DMAC_CORE |
|
default y if 460EX |
|
help |
|
This option enables support for old device trees without the |
|
"dmas" property. |
|
|
|
config SATA_DWC_DEBUG |
|
bool "Debugging driver version" |
|
depends on SATA_DWC |
|
help |
|
This option enables debugging output in the driver. |
|
|
|
config SATA_DWC_VDEBUG |
|
bool "Verbose debug output" |
|
depends on SATA_DWC_DEBUG |
|
help |
|
This option enables the taskfile dumping and NCQ debugging. |
|
|
|
config SATA_HIGHBANK |
|
tristate "Calxeda Highbank SATA support" |
|
depends on ARCH_HIGHBANK || COMPILE_TEST |
|
select SATA_HOST |
|
help |
|
This option enables support for the Calxeda Highbank SoC's |
|
onboard SATA. |
|
|
|
If unsure, say N. |
|
|
|
config SATA_MV |
|
tristate "Marvell SATA support" |
|
depends on PCI || ARCH_DOVE || ARCH_MV78XX0 || \ |
|
ARCH_MVEBU || ARCH_ORION5X || COMPILE_TEST |
|
select GENERIC_PHY |
|
select SATA_HOST |
|
help |
|
This option enables support for the Marvell Serial ATA family. |
|
Currently supports 88SX[56]0[48][01] PCI(-X) chips, |
|
as well as the newer [67]042 PCI-X/PCIe and SOC devices. |
|
|
|
If unsure, say N. |
|
|
|
config SATA_NV |
|
tristate "NVIDIA SATA support" |
|
depends on PCI |
|
select SATA_HOST |
|
help |
|
This option enables support for NVIDIA Serial ATA. |
|
|
|
If unsure, say N. |
|
|
|
config SATA_PROMISE |
|
tristate "Promise SATA TX2/TX4 support" |
|
depends on PCI |
|
select SATA_HOST |
|
help |
|
This option enables support for Promise Serial ATA TX2/TX4. |
|
|
|
If unsure, say N. |
|
|
|
config SATA_RCAR |
|
tristate "Renesas R-Car SATA support" |
|
depends on ARCH_RENESAS || COMPILE_TEST |
|
select SATA_HOST |
|
help |
|
This option enables support for Renesas R-Car Serial ATA. |
|
|
|
If unsure, say N. |
|
|
|
config SATA_SIL |
|
tristate "Silicon Image SATA support" |
|
depends on PCI |
|
select SATA_HOST |
|
help |
|
This option enables support for Silicon Image Serial ATA. |
|
|
|
If unsure, say N. |
|
|
|
config SATA_SIS |
|
tristate "SiS 964/965/966/180 SATA support" |
|
depends on PCI |
|
select PATA_SIS |
|
select SATA_HOST |
|
help |
|
This option enables support for SiS Serial ATA on |
|
SiS 964/965/966/180 and Parallel ATA on SiS 180. |
|
The PATA support for SiS 180 requires additionally to |
|
enable the PATA_SIS driver in the config. |
|
If unsure, say N. |
|
|
|
config SATA_SVW |
|
tristate "ServerWorks Frodo / Apple K2 SATA support" |
|
depends on PCI |
|
select SATA_HOST |
|
help |
|
This option enables support for Broadcom/Serverworks/Apple K2 |
|
SATA support. |
|
|
|
If unsure, say N. |
|
|
|
config SATA_ULI |
|
tristate "ULi Electronics SATA support" |
|
depends on PCI |
|
select SATA_HOST |
|
help |
|
This option enables support for ULi Electronics SATA. |
|
|
|
If unsure, say N. |
|
|
|
config SATA_VIA |
|
tristate "VIA SATA support" |
|
depends on PCI |
|
select SATA_HOST |
|
help |
|
This option enables support for VIA Serial ATA. |
|
|
|
If unsure, say N. |
|
|
|
config SATA_VITESSE |
|
tristate "VITESSE VSC-7174 / INTEL 31244 SATA support" |
|
depends on PCI |
|
select SATA_HOST |
|
help |
|
This option enables support for Vitesse VSC7174 and Intel 31244 Serial ATA. |
|
|
|
If unsure, say N. |
|
|
|
comment "PATA SFF controllers with BMDMA" |
|
|
|
config PATA_ALI |
|
tristate "ALi PATA support" |
|
depends on PCI |
|
select PATA_TIMINGS |
|
help |
|
This option enables support for the ALi ATA interfaces |
|
found on the many ALi chipsets. |
|
|
|
If unsure, say N. |
|
|
|
config PATA_AMD |
|
tristate "AMD/NVidia PATA support" |
|
depends on PCI |
|
select PATA_TIMINGS |
|
help |
|
This option enables support for the AMD and NVidia PATA |
|
interfaces found on the chipsets for Athlon/Athlon64. |
|
|
|
If unsure, say N. |
|
|
|
config PATA_ARASAN_CF |
|
tristate "ARASAN CompactFlash PATA Controller Support" |
|
depends on ARCH_SPEAR13XX || COMPILE_TEST |
|
depends on DMADEVICES |
|
select DMA_ENGINE |
|
help |
|
Say Y here to support the ARASAN CompactFlash PATA controller |
|
|
|
config PATA_ARTOP |
|
tristate "ARTOP 6210/6260 PATA support" |
|
depends on PCI |
|
help |
|
This option enables support for ARTOP PATA controllers. |
|
|
|
If unsure, say N. |
|
|
|
config PATA_ATIIXP |
|
tristate "ATI PATA support" |
|
depends on PCI |
|
help |
|
This option enables support for the ATI ATA interfaces |
|
found on the many ATI chipsets. |
|
|
|
If unsure, say N. |
|
|
|
config PATA_ATP867X |
|
tristate "ARTOP/Acard ATP867X PATA support" |
|
depends on PCI |
|
select PATA_TIMINGS |
|
help |
|
This option enables support for ARTOP/Acard ATP867X PATA |
|
controllers. |
|
|
|
If unsure, say N. |
|
|
|
config PATA_BK3710 |
|
tristate "Palmchip BK3710 PATA support" |
|
depends on ARCH_DAVINCI |
|
select PATA_TIMINGS |
|
help |
|
This option enables support for the integrated IDE controller on |
|
the TI DaVinci SoC. |
|
|
|
If unsure, say N. |
|
|
|
config PATA_CMD64X |
|
tristate "CMD64x PATA support" |
|
depends on PCI |
|
select PATA_TIMINGS |
|
help |
|
This option enables support for the CMD64x series chips |
|
except for the CMD640. |
|
|
|
If unsure, say N. |
|
|
|
config PATA_CS5520 |
|
tristate "CS5510/5520 PATA support" |
|
depends on PCI && (X86_32 || COMPILE_TEST) |
|
help |
|
This option enables support for the Cyrix 5510/5520 |
|
companion chip used with the MediaGX/Geode processor family. |
|
|
|
If unsure, say N. |
|
|
|
config PATA_CS5530 |
|
tristate "CS5530 PATA support" |
|
depends on PCI && (X86_32 || COMPILE_TEST) |
|
help |
|
This option enables support for the Cyrix/NatSemi/AMD CS5530 |
|
companion chip used with the MediaGX/Geode processor family. |
|
|
|
If unsure, say N. |
|
|
|
config PATA_CS5535 |
|
tristate "CS5535 PATA support (Experimental)" |
|
depends on PCI && X86_32 |
|
help |
|
This option enables support for the NatSemi/AMD CS5535 |
|
companion chip used with the Geode processor family. |
|
|
|
If unsure, say N. |
|
|
|
config PATA_CS5536 |
|
tristate "CS5536 PATA support" |
|
depends on PCI && (X86_32 || MIPS || COMPILE_TEST) |
|
help |
|
This option enables support for the AMD CS5536 |
|
companion chip used with the Geode LX processor family. |
|
|
|
If unsure, say N. |
|
|
|
config PATA_CYPRESS |
|
tristate "Cypress CY82C693 PATA support (Very Experimental)" |
|
depends on PCI |
|
select PATA_TIMINGS |
|
help |
|
This option enables support for the Cypress/Contaq CY82C693 |
|
chipset found in some Alpha systems |
|
|
|
If unsure, say N. |
|
|
|
config PATA_EFAR |
|
tristate "EFAR SLC90E66 support" |
|
depends on PCI |
|
help |
|
This option enables support for the EFAR SLC90E66 |
|
IDE controller found on some older machines. |
|
|
|
If unsure, say N. |
|
|
|
config PATA_EP93XX |
|
tristate "Cirrus Logic EP93xx PATA support" |
|
depends on ARCH_EP93XX |
|
select PATA_TIMINGS |
|
help |
|
This option enables support for the PATA controller in |
|
the Cirrus Logic EP9312 and EP9315 ARM CPU. |
|
|
|
If unsure, say N. |
|
|
|
config PATA_FTIDE010 |
|
tristate "Faraday Technology FTIDE010 PATA support" |
|
depends on OF |
|
depends on ARM |
|
depends on SATA_GEMINI |
|
help |
|
This option enables support for the Faraday FTIDE010 |
|
PATA controller found in the Cortina Gemini SoCs. |
|
|
|
If unsure, say N. |
|
|
|
config PATA_HPT366 |
|
tristate "HPT 366/368 PATA support" |
|
depends on PCI |
|
help |
|
This option enables support for the HPT 366 and 368 |
|
PATA controllers via the new ATA layer. |
|
|
|
If unsure, say N. |
|
|
|
config PATA_HPT37X |
|
tristate "HPT 370/370A/371/372/374/302 PATA support" |
|
depends on PCI |
|
help |
|
This option enables support for the majority of the later HPT |
|
PATA controllers via the new ATA layer. |
|
|
|
If unsure, say N. |
|
|
|
config PATA_HPT3X2N |
|
tristate "HPT 371N/372N/302N PATA support" |
|
depends on PCI |
|
help |
|
This option enables support for the N variant HPT PATA |
|
controllers via the new ATA layer. |
|
|
|
If unsure, say N. |
|
|
|
config PATA_HPT3X3 |
|
tristate "HPT 343/363 PATA support" |
|
depends on PCI |
|
help |
|
This option enables support for the HPT 343/363 |
|
PATA controllers via the new ATA layer |
|
|
|
If unsure, say N. |
|
|
|
config PATA_HPT3X3_DMA |
|
bool "HPT 343/363 DMA support" |
|
depends on PATA_HPT3X3 |
|
help |
|
This option enables DMA support for the HPT343/363 |
|
controllers. Enable with care as there are still some |
|
problems with DMA on this chipset. |
|
|
|
config PATA_ICSIDE |
|
tristate "Acorn ICS PATA support" |
|
depends on ARM && ARCH_ACORN |
|
select PATA_TIMINGS |
|
help |
|
On Acorn systems, say Y here if you wish to use the ICS PATA |
|
interface card. This is not required for ICS partition support. |
|
If you are unsure, say N to this. |
|
|
|
config PATA_IMX |
|
tristate "PATA support for Freescale iMX" |
|
depends on ARCH_MXC |
|
select PATA_TIMINGS |
|
help |
|
This option enables support for the PATA host available on Freescale |
|
iMX SoCs. |
|
|
|
If unsure, say N. |
|
|
|
config PATA_IT8213 |
|
tristate "IT8213 PATA support (Experimental)" |
|
depends on PCI |
|
help |
|
This option enables support for the ITE 821 PATA |
|
controllers via the new ATA layer. |
|
|
|
If unsure, say N. |
|
|
|
config PATA_IT821X |
|
tristate "IT8211/2 PATA support" |
|
depends on PCI |
|
help |
|
This option enables support for the ITE 8211 and 8212 |
|
PATA controllers via the new ATA layer, including RAID |
|
mode. |
|
|
|
If unsure, say N. |
|
|
|
config PATA_JMICRON |
|
tristate "JMicron PATA support" |
|
depends on PCI |
|
help |
|
Enable support for the JMicron IDE controller, via the new |
|
ATA layer. |
|
|
|
If unsure, say N. |
|
|
|
config PATA_MACIO |
|
tristate "Apple PowerMac/PowerBook internal 'MacIO' IDE" |
|
depends on PPC_PMAC |
|
help |
|
Most IDE capable PowerMacs have IDE busses driven by a variant |
|
of this controller which is part of the Apple chipset used on |
|
most PowerMac models. Some models have multiple busses using |
|
different chipsets, though generally, MacIO is one of them. |
|
|
|
config PATA_MARVELL |
|
tristate "Marvell PATA support via legacy mode" |
|
depends on PCI |
|
help |
|
This option enables limited support for the Marvell 88SE61xx ATA |
|
controllers. If you wish to use only the SATA ports then select |
|
the AHCI driver alone. If you wish to the use the PATA port or |
|
both SATA and PATA include this driver. |
|
|
|
If unsure, say N. |
|
|
|
config PATA_MPC52xx |
|
tristate "Freescale MPC52xx SoC internal IDE" |
|
depends on PPC_MPC52xx && PPC_BESTCOMM |
|
select PPC_BESTCOMM_ATA |
|
help |
|
This option enables support for integrated IDE controller |
|
of the Freescale MPC52xx SoC. |
|
|
|
If unsure, say N. |
|
|
|
config PATA_NETCELL |
|
tristate "NETCELL Revolution RAID support" |
|
depends on PCI |
|
help |
|
This option enables support for the Netcell Revolution RAID |
|
PATA controller. |
|
|
|
If unsure, say N. |
|
|
|
config PATA_NINJA32 |
|
tristate "Ninja32/Delkin Cardbus ATA support" |
|
depends on PCI |
|
help |
|
This option enables support for the Ninja32, Delkin and |
|
possibly other brands of Cardbus ATA adapter |
|
|
|
If unsure, say N. |
|
|
|
config PATA_NS87415 |
|
tristate "Nat Semi NS87415 PATA support" |
|
depends on PCI |
|
select PATA_TIMINGS |
|
help |
|
This option enables support for the National Semiconductor |
|
NS87415 PCI-IDE controller. |
|
|
|
If unsure, say N. |
|
|
|
config PATA_OLDPIIX |
|
tristate "Intel PATA old PIIX support" |
|
depends on PCI |
|
help |
|
This option enables support for early PIIX PATA support. |
|
|
|
If unsure, say N. |
|
|
|
config PATA_OPTIDMA |
|
tristate "OPTI FireStar PATA support (Very Experimental)" |
|
depends on PCI |
|
help |
|
This option enables DMA/PIO support for the later OPTi |
|
controllers found on some old motherboards and in some |
|
laptops. |
|
|
|
If unsure, say N. |
|
|
|
config PATA_PDC2027X |
|
tristate "Promise PATA 2027x support" |
|
depends on PCI |
|
help |
|
This option enables support for Promise PATA pdc20268 to pdc20277 host adapters. |
|
|
|
If unsure, say N. |
|
|
|
config PATA_PDC_OLD |
|
tristate "Older Promise PATA controller support" |
|
depends on PCI |
|
help |
|
This option enables support for the Promise 20246, 20262, 20263, |
|
20265 and 20267 adapters. |
|
|
|
If unsure, say N. |
|
|
|
config PATA_RADISYS |
|
tristate "RADISYS 82600 PATA support (Experimental)" |
|
depends on PCI |
|
help |
|
This option enables support for the RADISYS 82600 |
|
PATA controllers via the new ATA layer |
|
|
|
If unsure, say N. |
|
|
|
config PATA_RDC |
|
tristate "RDC PATA support" |
|
depends on PCI |
|
help |
|
This option enables basic support for the later RDC PATA controllers |
|
controllers via the new ATA layer. For the RDC 1010, you need to |
|
enable the IT821X driver instead. |
|
|
|
If unsure, say N. |
|
|
|
config PATA_SC1200 |
|
tristate "SC1200 PATA support" |
|
depends on PCI && (X86_32 || COMPILE_TEST) |
|
help |
|
This option enables support for the NatSemi/AMD SC1200 SoC |
|
companion chip used with the Geode processor family. |
|
|
|
If unsure, say N. |
|
|
|
config PATA_SCH |
|
tristate "Intel SCH PATA support" |
|
depends on PCI |
|
help |
|
This option enables support for Intel SCH PATA on the Intel |
|
SCH (US15W, US15L, UL11L) series host controllers. |
|
|
|
If unsure, say N. |
|
|
|
config PATA_SERVERWORKS |
|
tristate "SERVERWORKS OSB4/CSB5/CSB6/HT1000 PATA support" |
|
depends on PCI |
|
help |
|
This option enables support for the Serverworks OSB4/CSB5/CSB6 and |
|
HT1000 PATA controllers, via the new ATA layer. |
|
|
|
If unsure, say N. |
|
|
|
config PATA_SIL680 |
|
tristate "CMD / Silicon Image 680 PATA support" |
|
depends on PCI |
|
help |
|
This option enables support for CMD / Silicon Image 680 PATA. |
|
|
|
If unsure, say N. |
|
|
|
config PATA_SIS |
|
tristate "SiS PATA support" |
|
depends on PCI |
|
help |
|
This option enables support for SiS PATA controllers |
|
|
|
If unsure, say N. |
|
|
|
config PATA_TOSHIBA |
|
tristate "Toshiba Piccolo support (Experimental)" |
|
depends on PCI |
|
help |
|
Support for the Toshiba Piccolo controllers. Currently only the |
|
primary channel is supported by this driver. |
|
|
|
If unsure, say N. |
|
|
|
config PATA_TRIFLEX |
|
tristate "Compaq Triflex PATA support" |
|
depends on PCI |
|
help |
|
Enable support for the Compaq 'Triflex' IDE controller as found |
|
on many Compaq Pentium-Pro systems, via the new ATA layer. |
|
|
|
If unsure, say N. |
|
|
|
config PATA_VIA |
|
tristate "VIA PATA support" |
|
depends on PCI |
|
select PATA_TIMINGS |
|
help |
|
This option enables support for the VIA PATA interfaces |
|
found on the many VIA chipsets. |
|
|
|
If unsure, say N. |
|
|
|
config PATA_PXA |
|
tristate "PXA DMA-capable PATA support" |
|
depends on ARCH_PXA |
|
help |
|
This option enables support for harddrive attached to PXA CPU's bus. |
|
|
|
NOTE: This driver utilizes PXA DMA controller, in case your hardware |
|
is not capable of doing MWDMA, use pata_platform instead. |
|
|
|
If unsure, say N. |
|
|
|
config PATA_WINBOND |
|
tristate "Winbond SL82C105 PATA support" |
|
depends on PCI |
|
help |
|
This option enables support for SL82C105 PATA devices found in the |
|
Netwinder and some other systems |
|
|
|
If unsure, say N. |
|
|
|
endif # ATA_BMDMA |
|
|
|
comment "PIO-only SFF controllers" |
|
|
|
config PATA_CMD640_PCI |
|
tristate "CMD640 PCI PATA support (Experimental)" |
|
depends on PCI |
|
select PATA_TIMINGS |
|
help |
|
This option enables support for the CMD640 PCI IDE |
|
interface chip. Only the primary channel is currently |
|
supported. |
|
|
|
If unsure, say N. |
|
|
|
config PATA_FALCON |
|
tristate "Atari Falcon PATA support" |
|
depends on M68K && ATARI |
|
help |
|
This option enables support for the on-board IDE |
|
interface on the Atari Falcon. |
|
|
|
If unsure, say N. |
|
|
|
config PATA_GAYLE |
|
tristate "Amiga Gayle PATA support" |
|
depends on M68K && AMIGA |
|
help |
|
This option enables support for the on-board IDE |
|
interfaces on some Amiga models (A600, A1200, |
|
A4000 and A4000T) and also for IDE interfaces on |
|
the Zorro expansion bus (M-Tech E-Matrix 530 |
|
expansion card). |
|
|
|
If unsure, say N. |
|
|
|
config PATA_BUDDHA |
|
tristate "Buddha/Catweasel/X-Surf PATA support" |
|
depends on ZORRO |
|
help |
|
This option enables support for the IDE interfaces |
|
on the Buddha, Catweasel and X-Surf expansion boards |
|
on the Zorro expansion bus. It supports up to two |
|
interfaces on the Buddha, three on the Catweasel and |
|
two on the X-Surf. |
|
|
|
If unsure, say N. |
|
|
|
config PATA_ISAPNP |
|
tristate "ISA Plug and Play PATA support" |
|
depends on ISAPNP |
|
help |
|
This option enables support for ISA plug & play ATA |
|
controllers such as those found on old soundcards. |
|
|
|
If unsure, say N. |
|
|
|
config PATA_IXP4XX_CF |
|
tristate "IXP4XX Compact Flash support" |
|
depends on ARCH_IXP4XX |
|
help |
|
This option enables support for a Compact Flash connected on |
|
the ixp4xx expansion bus. This driver had been written for |
|
Loft/Avila boards in mind but can work with others. |
|
|
|
If unsure, say N. |
|
|
|
config PATA_MPIIX |
|
tristate "Intel PATA MPIIX support" |
|
depends on PCI |
|
help |
|
This option enables support for MPIIX PATA support. |
|
|
|
If unsure, say N. |
|
|
|
config PATA_NS87410 |
|
tristate "Nat Semi NS87410 PATA support" |
|
depends on PCI |
|
select PATA_TIMINGS |
|
help |
|
This option enables support for the National Semiconductor |
|
NS87410 PCI-IDE controller. |
|
|
|
If unsure, say N. |
|
|
|
config PATA_OPTI |
|
tristate "OPTI621/6215 PATA support (Very Experimental)" |
|
depends on PCI |
|
help |
|
This option enables full PIO support for the early Opti ATA |
|
controllers found on some old motherboards. |
|
|
|
If unsure, say N. |
|
|
|
config PATA_PALMLD |
|
tristate "Palm LifeDrive PATA support" |
|
depends on MACH_PALMLD |
|
help |
|
This option enables support for Palm LifeDrive's internal ATA |
|
port via the new ATA layer. |
|
|
|
If unsure, say N. |
|
|
|
config PATA_PCMCIA |
|
tristate "PCMCIA PATA support" |
|
depends on PCMCIA |
|
help |
|
This option enables support for PCMCIA ATA interfaces, including |
|
compact flash card adapters via the new ATA layer. |
|
|
|
If unsure, say N. |
|
|
|
config PATA_PLATFORM |
|
tristate "Generic platform device PATA support" |
|
depends on EXPERT || PPC || HAVE_PATA_PLATFORM |
|
help |
|
This option enables support for generic directly connected ATA |
|
devices commonly found on embedded systems. |
|
|
|
If unsure, say N. |
|
|
|
config PATA_OF_PLATFORM |
|
tristate "OpenFirmware platform device PATA support" |
|
depends on PATA_PLATFORM && OF |
|
help |
|
This option enables support for generic directly connected ATA |
|
devices commonly found on embedded systems with OpenFirmware |
|
bindings. |
|
|
|
If unsure, say N. |
|
|
|
config PATA_QDI |
|
tristate "QDI VLB PATA support" |
|
depends on ISA |
|
select PATA_LEGACY |
|
help |
|
Support for QDI 6500 and 6580 PATA controllers on VESA local bus. |
|
|
|
config PATA_RB532 |
|
tristate "RouterBoard 532 PATA CompactFlash support" |
|
depends on MIKROTIK_RB532 |
|
help |
|
This option enables support for the RouterBoard 532 |
|
PATA CompactFlash controller. |
|
|
|
If unsure, say N. |
|
|
|
config PATA_RZ1000 |
|
tristate "PC Tech RZ1000 PATA support" |
|
depends on PCI |
|
help |
|
This option enables basic support for the PC Tech RZ1000/1 |
|
PATA controllers via the new ATA layer |
|
|
|
If unsure, say N. |
|
|
|
config PATA_SAMSUNG_CF |
|
tristate "Samsung SoC PATA support" |
|
depends on SAMSUNG_DEV_IDE |
|
select PATA_TIMINGS |
|
help |
|
This option enables basic support for Samsung's S3C/S5P board |
|
PATA controllers via the new ATA layer |
|
|
|
If unsure, say N. |
|
|
|
config PATA_WINBOND_VLB |
|
tristate "Winbond W83759A VLB PATA support (Experimental)" |
|
depends on ISA |
|
select PATA_LEGACY |
|
help |
|
Support for the Winbond W83759A controller on Vesa Local Bus |
|
systems. |
|
|
|
comment "Generic fallback / legacy drivers" |
|
|
|
config PATA_ACPI |
|
tristate "ACPI firmware driver for PATA" |
|
depends on ATA_ACPI && ATA_BMDMA && PCI |
|
select PATA_TIMINGS |
|
help |
|
This option enables an ACPI method driver which drives |
|
motherboard PATA controller interfaces through the ACPI |
|
firmware in the BIOS. This driver can sometimes handle |
|
otherwise unsupported hardware. |
|
|
|
config ATA_GENERIC |
|
tristate "Generic ATA support" |
|
depends on PCI && ATA_BMDMA |
|
select SATA_HOST |
|
help |
|
This option enables support for generic BIOS configured |
|
ATA controllers via the new ATA layer |
|
|
|
If unsure, say N. |
|
|
|
config PATA_LEGACY |
|
tristate "Legacy ISA PATA support (Experimental)" |
|
depends on (ISA || PCI) |
|
select PATA_TIMINGS |
|
help |
|
This option enables support for ISA/VLB/PCI bus legacy PATA |
|
ports and allows them to be accessed via the new ATA layer. |
|
|
|
If unsure, say N. |
|
|
|
endif # ATA_SFF |
|
endif # ATA
|
|
|