forked from Qortal/Brooklyn
You can not select more than 25 topics
Topics must start with a letter or number, can include dashes ('-') and can be up to 35 characters long.
262 lines
6.0 KiB
262 lines
6.0 KiB
// SPDX-License-Identifier: GPL-2.0-only |
|
/* |
|
* drivers/mtd/maps/ixp4xx.c |
|
* |
|
* MTD Map file for IXP4XX based systems. Please do not make per-board |
|
* changes in here. If your board needs special setup, do it in your |
|
* platform level code in arch/arm/mach-ixp4xx/board-setup.c |
|
* |
|
* Original Author: Intel Corporation |
|
* Maintainer: Deepak Saxena <[email protected]> |
|
* |
|
* Copyright (C) 2002 Intel Corporation |
|
* Copyright (C) 2003-2004 MontaVista Software, Inc. |
|
* |
|
*/ |
|
|
|
#include <linux/err.h> |
|
#include <linux/module.h> |
|
#include <linux/types.h> |
|
#include <linux/kernel.h> |
|
#include <linux/string.h> |
|
#include <linux/slab.h> |
|
#include <linux/ioport.h> |
|
#include <linux/device.h> |
|
#include <linux/platform_device.h> |
|
|
|
#include <linux/mtd/mtd.h> |
|
#include <linux/mtd/map.h> |
|
#include <linux/mtd/partitions.h> |
|
|
|
#include <asm/io.h> |
|
#include <asm/mach/flash.h> |
|
|
|
#include <linux/reboot.h> |
|
|
|
/* |
|
* Read/write a 16 bit word from flash address 'addr'. |
|
* |
|
* When the cpu is in little-endian mode it swizzles the address lines |
|
* ('address coherency') so we need to undo the swizzling to ensure commands |
|
* and the like end up on the correct flash address. |
|
* |
|
* To further complicate matters, due to the way the expansion bus controller |
|
* handles 32 bit reads, the byte stream ABCD is stored on the flash as: |
|
* D15 D0 |
|
* +---+---+ |
|
* | A | B | 0 |
|
* +---+---+ |
|
* | C | D | 2 |
|
* +---+---+ |
|
* This means that on LE systems each 16 bit word must be swapped. Note that |
|
* this requires CONFIG_MTD_CFI_BE_BYTE_SWAP to be enabled to 'unswap' the CFI |
|
* data and other flash commands which are always in D7-D0. |
|
*/ |
|
#ifndef __ARMEB__ |
|
#ifndef CONFIG_MTD_CFI_BE_BYTE_SWAP |
|
# error CONFIG_MTD_CFI_BE_BYTE_SWAP required |
|
#endif |
|
|
|
static inline u16 flash_read16(void __iomem *addr) |
|
{ |
|
return be16_to_cpu(__raw_readw((void __iomem *)((unsigned long)addr ^ 0x2))); |
|
} |
|
|
|
static inline void flash_write16(u16 d, void __iomem *addr) |
|
{ |
|
__raw_writew(cpu_to_be16(d), (void __iomem *)((unsigned long)addr ^ 0x2)); |
|
} |
|
|
|
#define BYTE0(h) ((h) & 0xFF) |
|
#define BYTE1(h) (((h) >> 8) & 0xFF) |
|
|
|
#else |
|
|
|
static inline u16 flash_read16(const void __iomem *addr) |
|
{ |
|
return __raw_readw(addr); |
|
} |
|
|
|
static inline void flash_write16(u16 d, void __iomem *addr) |
|
{ |
|
__raw_writew(d, addr); |
|
} |
|
|
|
#define BYTE0(h) (((h) >> 8) & 0xFF) |
|
#define BYTE1(h) ((h) & 0xFF) |
|
#endif |
|
|
|
static map_word ixp4xx_read16(struct map_info *map, unsigned long ofs) |
|
{ |
|
map_word val; |
|
val.x[0] = flash_read16(map->virt + ofs); |
|
return val; |
|
} |
|
|
|
/* |
|
* The IXP4xx expansion bus only allows 16-bit wide acceses |
|
* when attached to a 16-bit wide device (such as the 28F128J3A), |
|
* so we can't just memcpy_fromio(). |
|
*/ |
|
static void ixp4xx_copy_from(struct map_info *map, void *to, |
|
unsigned long from, ssize_t len) |
|
{ |
|
u8 *dest = (u8 *) to; |
|
void __iomem *src = map->virt + from; |
|
|
|
if (len <= 0) |
|
return; |
|
|
|
if (from & 1) { |
|
*dest++ = BYTE1(flash_read16(src-1)); |
|
src++; |
|
--len; |
|
} |
|
|
|
while (len >= 2) { |
|
u16 data = flash_read16(src); |
|
*dest++ = BYTE0(data); |
|
*dest++ = BYTE1(data); |
|
src += 2; |
|
len -= 2; |
|
} |
|
|
|
if (len > 0) |
|
*dest++ = BYTE0(flash_read16(src)); |
|
} |
|
|
|
/* |
|
* Unaligned writes are ignored, causing the 8-bit |
|
* probe to fail and proceed to the 16-bit probe (which succeeds). |
|
*/ |
|
static void ixp4xx_probe_write16(struct map_info *map, map_word d, unsigned long adr) |
|
{ |
|
if (!(adr & 1)) |
|
flash_write16(d.x[0], map->virt + adr); |
|
} |
|
|
|
/* |
|
* Fast write16 function without the probing check above |
|
*/ |
|
static void ixp4xx_write16(struct map_info *map, map_word d, unsigned long adr) |
|
{ |
|
flash_write16(d.x[0], map->virt + adr); |
|
} |
|
|
|
struct ixp4xx_flash_info { |
|
struct mtd_info *mtd; |
|
struct map_info map; |
|
struct resource *res; |
|
}; |
|
|
|
static const char * const probes[] = { "RedBoot", "cmdlinepart", NULL }; |
|
|
|
static int ixp4xx_flash_remove(struct platform_device *dev) |
|
{ |
|
struct flash_platform_data *plat = dev_get_platdata(&dev->dev); |
|
struct ixp4xx_flash_info *info = platform_get_drvdata(dev); |
|
|
|
if(!info) |
|
return 0; |
|
|
|
if (info->mtd) { |
|
mtd_device_unregister(info->mtd); |
|
map_destroy(info->mtd); |
|
} |
|
|
|
if (plat->exit) |
|
plat->exit(); |
|
|
|
return 0; |
|
} |
|
|
|
static int ixp4xx_flash_probe(struct platform_device *dev) |
|
{ |
|
struct flash_platform_data *plat = dev_get_platdata(&dev->dev); |
|
struct ixp4xx_flash_info *info; |
|
struct mtd_part_parser_data ppdata = { |
|
.origin = dev->resource->start, |
|
}; |
|
int err = -1; |
|
|
|
if (!plat) |
|
return -ENODEV; |
|
|
|
if (plat->init) { |
|
err = plat->init(); |
|
if (err) |
|
return err; |
|
} |
|
|
|
info = devm_kzalloc(&dev->dev, sizeof(struct ixp4xx_flash_info), |
|
GFP_KERNEL); |
|
if(!info) { |
|
err = -ENOMEM; |
|
goto Error; |
|
} |
|
|
|
platform_set_drvdata(dev, info); |
|
|
|
/* |
|
* Tell the MTD layer we're not 1:1 mapped so that it does |
|
* not attempt to do a direct access on us. |
|
*/ |
|
info->map.phys = NO_XIP; |
|
info->map.size = resource_size(dev->resource); |
|
|
|
/* |
|
* We only support 16-bit accesses for now. If and when |
|
* any board use 8-bit access, we'll fixup the driver to |
|
* handle that. |
|
*/ |
|
info->map.bankwidth = 2; |
|
info->map.name = dev_name(&dev->dev); |
|
info->map.read = ixp4xx_read16; |
|
info->map.write = ixp4xx_probe_write16; |
|
info->map.copy_from = ixp4xx_copy_from; |
|
|
|
info->map.virt = devm_ioremap_resource(&dev->dev, dev->resource); |
|
if (IS_ERR(info->map.virt)) { |
|
err = PTR_ERR(info->map.virt); |
|
goto Error; |
|
} |
|
|
|
info->mtd = do_map_probe(plat->map_name, &info->map); |
|
if (!info->mtd) { |
|
printk(KERN_ERR "IXP4XXFlash: map_probe failed\n"); |
|
err = -ENXIO; |
|
goto Error; |
|
} |
|
info->mtd->dev.parent = &dev->dev; |
|
|
|
/* Use the fast version */ |
|
info->map.write = ixp4xx_write16; |
|
|
|
err = mtd_device_parse_register(info->mtd, probes, &ppdata, |
|
plat->parts, plat->nr_parts); |
|
if (err) { |
|
printk(KERN_ERR "Could not parse partitions\n"); |
|
goto Error; |
|
} |
|
|
|
return 0; |
|
|
|
Error: |
|
ixp4xx_flash_remove(dev); |
|
return err; |
|
} |
|
|
|
static struct platform_driver ixp4xx_flash_driver = { |
|
.probe = ixp4xx_flash_probe, |
|
.remove = ixp4xx_flash_remove, |
|
.driver = { |
|
.name = "IXP4XX-Flash", |
|
}, |
|
}; |
|
|
|
module_platform_driver(ixp4xx_flash_driver); |
|
|
|
MODULE_LICENSE("GPL"); |
|
MODULE_DESCRIPTION("MTD map driver for Intel IXP4xx systems"); |
|
MODULE_AUTHOR("Deepak Saxena"); |
|
MODULE_ALIAS("platform:IXP4XX-Flash");
|
|
|