forked from Qortal/Brooklyn
You can not select more than 25 topics
Topics must start with a letter or number, can include dashes ('-') and can be up to 35 characters long.
71 lines
3.6 KiB
71 lines
3.6 KiB
================= |
|
Linux I2C and DMA |
|
================= |
|
|
|
Given that I2C is a low-speed bus, over which the majority of messages |
|
transferred are small, it is not considered a prime user of DMA access. At this |
|
time of writing, only 10% of I2C bus master drivers have DMA support |
|
implemented. And the vast majority of transactions are so small that setting up |
|
DMA for it will likely add more overhead than a plain PIO transfer. |
|
|
|
Therefore, it is *not* mandatory that the buffer of an I2C message is DMA safe. |
|
It does not seem reasonable to apply additional burdens when the feature is so |
|
rarely used. However, it is recommended to use a DMA-safe buffer if your |
|
message size is likely applicable for DMA. Most drivers have this threshold |
|
around 8 bytes (as of today, this is mostly an educated guess, however). For |
|
any message of 16 byte or larger, it is probably a really good idea. Please |
|
note that other subsystems you use might add requirements. E.g., if your |
|
I2C bus master driver is using USB as a bridge, then you need to have DMA |
|
safe buffers always, because USB requires it. |
|
|
|
Clients |
|
------- |
|
|
|
For clients, if you use a DMA safe buffer in i2c_msg, set the I2C_M_DMA_SAFE |
|
flag with it. Then, the I2C core and drivers know they can safely operate DMA |
|
on it. Note that using this flag is optional. I2C host drivers which are not |
|
updated to use this flag will work like before. And like before, they risk |
|
using an unsafe DMA buffer. To improve this situation, using I2C_M_DMA_SAFE in |
|
more and more clients and host drivers is the planned way forward. Note also |
|
that setting this flag makes only sense in kernel space. User space data is |
|
copied into kernel space anyhow. The I2C core makes sure the destination |
|
buffers in kernel space are always DMA capable. Also, when the core emulates |
|
SMBus transactions via I2C, the buffers for block transfers are DMA safe. Users |
|
of i2c_master_send() and i2c_master_recv() functions can now use DMA safe |
|
variants (i2c_master_send_dmasafe() and i2c_master_recv_dmasafe()) once they |
|
know their buffers are DMA safe. Users of i2c_transfer() must set the |
|
I2C_M_DMA_SAFE flag manually. |
|
|
|
Masters |
|
------- |
|
|
|
Bus master drivers wishing to implement safe DMA can use helper functions from |
|
the I2C core. One gives you a DMA-safe buffer for a given i2c_msg as long as a |
|
certain threshold is met:: |
|
|
|
dma_buf = i2c_get_dma_safe_msg_buf(msg, threshold_in_byte); |
|
|
|
If a buffer is returned, it is either msg->buf for the I2C_M_DMA_SAFE case or a |
|
bounce buffer. But you don't need to care about that detail, just use the |
|
returned buffer. If NULL is returned, the threshold was not met or a bounce |
|
buffer could not be allocated. Fall back to PIO in that case. |
|
|
|
In any case, a buffer obtained from above needs to be released. Another helper |
|
function ensures a potentially used bounce buffer is freed:: |
|
|
|
i2c_put_dma_safe_msg_buf(dma_buf, msg, xferred); |
|
|
|
The last argument 'xferred' controls if the buffer is synced back to the |
|
message or not. No syncing is needed in cases setting up DMA had an error and |
|
there was no data transferred. |
|
|
|
The bounce buffer handling from the core is generic and simple. It will always |
|
allocate a new bounce buffer. If you want a more sophisticated handling (e.g. |
|
reusing pre-allocated buffers), you are free to implement your own. |
|
|
|
Please also check the in-kernel documentation for details. The i2c-sh_mobile |
|
driver can be used as a reference example how to use the above helpers. |
|
|
|
Final note: If you plan to use DMA with I2C (or with anything else, actually) |
|
make sure you have CONFIG_DMA_API_DEBUG enabled during development. It can help |
|
you find various issues which can be complex to debug otherwise.
|
|
|