forked from Qortal/Brooklyn
You can not select more than 25 topics
Topics must start with a letter or number, can include dashes ('-') and can be up to 35 characters long.
35 lines
1.3 KiB
35 lines
1.3 KiB
============== |
|
CerfBoard/Cube |
|
============== |
|
|
|
*** The StrongARM version of the CerfBoard/Cube has been discontinued *** |
|
|
|
The Intrinsyc CerfBoard is a StrongARM 1110-based computer on a board |
|
that measures approximately 2" square. It includes an Ethernet |
|
controller, an RS232-compatible serial port, a USB function port, and |
|
one CompactFlash+ slot on the back. Pictures can be found at the |
|
Intrinsyc website, http://www.intrinsyc.com. |
|
|
|
This document describes the support in the Linux kernel for the |
|
Intrinsyc CerfBoard. |
|
|
|
Supported in this version |
|
========================= |
|
|
|
- CompactFlash+ slot (select PCMCIA in General Setup and any options |
|
that may be required) |
|
- Onboard Crystal CS8900 Ethernet controller (Cerf CS8900A support in |
|
Network Devices) |
|
- Serial ports with a serial console (hardcoded to 38400 8N1) |
|
|
|
In order to get this kernel onto your Cerf, you need a server that runs |
|
both BOOTP and TFTP. Detailed instructions should have come with your |
|
evaluation kit on how to use the bootloader. This series of commands |
|
will suffice:: |
|
|
|
make ARCH=arm CROSS_COMPILE=arm-linux- cerfcube_defconfig |
|
make ARCH=arm CROSS_COMPILE=arm-linux- zImage |
|
make ARCH=arm CROSS_COMPILE=arm-linux- modules |
|
cp arch/arm/boot/zImage <TFTP directory> |
|
|
|
[email protected]
|
|
|