forked from Qortal/Brooklyn
You can not select more than 25 topics
Topics must start with a letter or number, can include dashes ('-') and can be up to 35 characters long.
24 lines
1.0 KiB
24 lines
1.0 KiB
What: /sys/bus/iio/devices/iio:deviceX/in_allow_async_readout |
|
Date: December 2015 |
|
KernelVersion: 4.4 |
|
Contact: [email protected] |
|
Description: |
|
By default (value '0'), the capture thread checks for the Conversion |
|
Ready Flag to being set prior to committing a new value to the sample |
|
buffer. This synchronizes the in-chip conversion rate with the |
|
in-driver readout rate at the cost of an additional register read. |
|
|
|
Writing '1' will remove the polling for the Conversion Ready Flags to |
|
save the additional i2c transaction, which will improve the bandwidth |
|
available for reading data. However, samples can be occasionally skipped |
|
or repeated, depending on the beat between the capture and conversion |
|
rates. |
|
|
|
What: /sys/bus/iio/devices/iio:deviceX/in_shunt_resistor |
|
Date: December 2015 |
|
KernelVersion: 4.4 |
|
Contact: [email protected] |
|
Description: |
|
The value of the shunt resistor may be known only at runtime fom an |
|
eeprom content read by a client application. This attribute allows to |
|
set its value in ohms.
|
|
|