forked from Qortal/Brooklyn
You can not select more than 25 topics
Topics must start with a letter or number, can include dashes ('-') and can be up to 35 characters long.
38 lines
1.2 KiB
38 lines
1.2 KiB
Broadcom BCM2835 auxiliar SPI1/2 controller |
|
|
|
The BCM2835 contains two forms of SPI master controller, one known simply as |
|
SPI0, and the other known as the "Universal SPI Master"; part of the |
|
auxiliary block. This binding applies to the SPI1/2 controller. |
|
|
|
Required properties: |
|
- compatible: Should be "brcm,bcm2835-aux-spi". |
|
- reg: Should contain register location and length for the spi block |
|
- interrupts: Should contain shared interrupt of the aux block |
|
- clocks: The clock feeding the SPI controller - needs to |
|
point to the auxiliar clock driver of the bcm2835, |
|
as this clock will enable the output gate for the specific |
|
clock. |
|
- cs-gpios: the cs-gpios (native cs is NOT supported) |
|
see also spi-bus.txt |
|
|
|
Example: |
|
|
|
spi1@7e215080 { |
|
compatible = "brcm,bcm2835-aux-spi"; |
|
reg = <0x7e215080 0x40>; |
|
interrupts = <1 29>; |
|
clocks = <&aux_clocks BCM2835_AUX_CLOCK_SPI1>; |
|
#address-cells = <1>; |
|
#size-cells = <0>; |
|
cs-gpios = <&gpio 18>, <&gpio 17>, <&gpio 16>; |
|
}; |
|
|
|
spi2@7e2150c0 { |
|
compatible = "brcm,bcm2835-aux-spi"; |
|
reg = <0x7e2150c0 0x40>; |
|
interrupts = <1 29>; |
|
clocks = <&aux_clocks BCM2835_AUX_CLOCK_SPI2>; |
|
#address-cells = <1>; |
|
#size-cells = <0>; |
|
cs-gpios = <&gpio 43>, <&gpio 44>, <&gpio 45>; |
|
};
|
|
|