forked from Qortal/Brooklyn
You can not select more than 25 topics
Topics must start with a letter or number, can include dashes ('-') and can be up to 35 characters long.
117 lines
3.8 KiB
117 lines
3.8 KiB
ACT88xx regulators |
|
------------------- |
|
|
|
Required properties: |
|
- compatible: "active-semi,act8846" or "active-semi,act8865" or "active-semi,act8600" |
|
- reg: I2C slave address |
|
|
|
Optional properties: |
|
- system-power-controller: Telling whether or not this pmic is controlling |
|
the system power. See Documentation/devicetree/bindings/power/power-controller.txt . |
|
- active-semi,vsel-high: Indicates the VSEL pin is high. |
|
If this property is missing, assume the VSEL pin is low(0). |
|
|
|
Optional input supply properties: |
|
- for act8600: |
|
- vp1-supply: The input supply for DCDC_REG1 |
|
- vp2-supply: The input supply for DCDC_REG2 |
|
- vp3-supply: The input supply for DCDC_REG3 |
|
- inl-supply: The input supply for LDO_REG5, LDO_REG6, LDO_REG7 and LDO_REG8 |
|
SUDCDC_REG4, LDO_REG9 and LDO_REG10 do not have separate supplies. |
|
- for act8846: |
|
- vp1-supply: The input supply for REG1 |
|
- vp2-supply: The input supply for REG2 |
|
- vp3-supply: The input supply for REG3 |
|
- vp4-supply: The input supply for REG4 |
|
- inl1-supply: The input supply for REG5, REG6 and REG7 |
|
- inl2-supply: The input supply for REG8 and LDO_REG9 |
|
- inl3-supply: The input supply for REG10, REG11 and REG12 |
|
- for act8865: |
|
- vp1-supply: The input supply for DCDC_REG1 |
|
- vp2-supply: The input supply for DCDC_REG2 |
|
- vp3-supply: The input supply for DCDC_REG3 |
|
- inl45-supply: The input supply for LDO_REG1 and LDO_REG2 |
|
- inl67-supply: The input supply for LDO_REG3 and LDO_REG4 |
|
|
|
Any standard regulator properties can be used to configure the single regulator. |
|
regulator-initial-mode, regulator-allowed-modes and regulator-mode could be specified |
|
for act8865 using mode values from dt-bindings/regulator/active-semi,8865-regulator.h |
|
file. |
|
|
|
The valid names for regulators are: |
|
- for act8846: |
|
REG1, REG2, REG3, REG4, REG5, REG6, REG7, REG8, REG9, REG10, REG11, REG12 |
|
- for act8865: |
|
DCDC_REG1, DCDC_REG2, DCDC_REG3, LDO_REG1, LDO_REG2, LDO_REG3, LDO_REG4. |
|
- for act8600: |
|
DCDC_REG1, DCDC_REG2, DCDC_REG3, SUDCDC_REG4, LDO_REG5, LDO_REG6, LDO_REG7, |
|
LDO_REG8, LDO_REG9, LDO_REG10, |
|
|
|
Example: |
|
-------- |
|
|
|
#include <dt-bindings/regulator/active-semi,8865-regulator.h> |
|
|
|
i2c1: i2c@f0018000 { |
|
pmic: act8865@5b { |
|
compatible = "active-semi,act8865"; |
|
reg = <0x5b>; |
|
active-semi,vsel-high; |
|
|
|
regulators { |
|
vcc_1v8_reg: DCDC_REG1 { |
|
regulator-name = "VCC_1V8"; |
|
regulator-min-microvolt = <1800000>; |
|
regulator-max-microvolt = <1800000>; |
|
regulator-always-on; |
|
}; |
|
|
|
vcc_1v2_reg: DCDC_REG2 { |
|
regulator-name = "VCC_1V2"; |
|
regulator-min-microvolt = <1100000>; |
|
regulator-max-microvolt = <1300000>; |
|
regulator-always-on; |
|
|
|
regulator-allowed-modes = <ACT8865_REGULATOR_MODE_FIXED>, |
|
<ACT8865_REGULATOR_MODE_LOWPOWER>; |
|
regulator-initial-mode = <ACT8865_REGULATOR_MODE_FIXED>; |
|
|
|
regulator-state-mem { |
|
regulator-on-in-suspend; |
|
regulator-suspend-min-microvolt = <1150000>; |
|
regulator-suspend-max-microvolt = <1150000>; |
|
regulator-changeable-in-suspend; |
|
regulator-mode = <ACT8865_REGULATOR_MODE_LOWPOWER>; |
|
}; |
|
}; |
|
|
|
vcc_3v3_reg: DCDC_REG3 { |
|
regulator-name = "VCC_3V3"; |
|
regulator-min-microvolt = <3300000>; |
|
regulator-max-microvolt = <3300000>; |
|
regulator-always-on; |
|
}; |
|
|
|
vddana_reg: LDO_REG1 { |
|
regulator-name = "VDDANA"; |
|
regulator-min-microvolt = <3300000>; |
|
regulator-max-microvolt = <3300000>; |
|
regulator-always-on; |
|
|
|
regulator-allowed-modes = <ACT8865_REGULATOR_MODE_NORMAL>, |
|
<ACT8865_REGULATOR_MODE_LOWPOWER>; |
|
regulator-initial-mode = <ACT8865_REGULATOR_MODE_NORMAL>; |
|
|
|
regulator-state-mem { |
|
regulator-off-in-suspend; |
|
}; |
|
}; |
|
|
|
vddfuse_reg: LDO_REG2 { |
|
regulator-name = "FUSE_2V5"; |
|
regulator-min-microvolt = <2500000>; |
|
regulator-max-microvolt = <2500000>; |
|
}; |
|
}; |
|
}; |
|
};
|
|
|