forked from Qortal/Brooklyn
You can not select more than 25 topics
Topics must start with a letter or number, can include dashes ('-') and can be up to 35 characters long.
59 lines
1.9 KiB
59 lines
1.9 KiB
NXP LPC18xx/43xx GPIO controller Device Tree Bindings |
|
----------------------------------------------------- |
|
|
|
Required properties: |
|
- compatible : Should be "nxp,lpc1850-gpio" |
|
- reg : List of addresses and lengths of the GPIO controller |
|
register sets |
|
- reg-names : Should be "gpio", "gpio-pin-ic", "gpio-group0-ic" and |
|
"gpio-gpoup1-ic" |
|
- clocks : Phandle and clock specifier pair for GPIO controller |
|
- resets : Phandle and reset specifier pair for GPIO controller |
|
- gpio-controller : Marks the device node as a GPIO controller |
|
- #gpio-cells : Should be two: |
|
- The first cell is the GPIO line number |
|
- The second cell is used to specify polarity |
|
- interrupt-controller : Marks the device node as an interrupt controller |
|
- #interrupt-cells : Should be two: |
|
- The first cell is an interrupt number within |
|
0..9 range, for GPIO pin interrupts it is equal |
|
to 'nxp,gpio-pin-interrupt' property value of |
|
GPIO pin configuration, 8 is for GPIO GROUP0 |
|
interrupt, 9 is for GPIO GROUP1 interrupt |
|
- The second cell is used to specify interrupt type |
|
|
|
Optional properties: |
|
- gpio-ranges : Mapping between GPIO and pinctrl |
|
|
|
Example: |
|
#define LPC_GPIO(port, pin) (port * 32 + pin) |
|
#define LPC_PIN(port, pin) (0x##port * 32 + pin) |
|
|
|
gpio: gpio@400f4000 { |
|
compatible = "nxp,lpc1850-gpio"; |
|
reg = <0x400f4000 0x4000>, <0x40087000 0x1000>, |
|
<0x40088000 0x1000>, <0x40089000 0x1000>; |
|
reg-names = "gpio", "gpio-pin-ic", |
|
"gpio-group0-ic", "gpio-gpoup1-ic"; |
|
clocks = <&ccu1 CLK_CPU_GPIO>; |
|
resets = <&rgu 28>; |
|
gpio-controller; |
|
#gpio-cells = <2>; |
|
interrupt-controller; |
|
#interrupt-cells = <2>; |
|
gpio-ranges = <&pinctrl LPC_GPIO(0,0) LPC_PIN(0,0) 2>, |
|
... |
|
<&pinctrl LPC_GPIO(7,19) LPC_PIN(f,5) 7>; |
|
}; |
|
|
|
gpio_joystick { |
|
compatible = "gpio-keys"; |
|
... |
|
|
|
button0 { |
|
... |
|
interrupt-parent = <&gpio>; |
|
interrupts = <1 IRQ_TYPE_EDGE_BOTH>; |
|
gpios = <&gpio LPC_GPIO(4,8) GPIO_ACTIVE_LOW>; |
|
}; |
|
};
|
|
|