mirror of https://github.com/Qortal/Brooklyn
You can not select more than 25 topics
Topics must start with a letter or number, can include dashes ('-') and can be up to 35 characters long.
338 lines
10 KiB
338 lines
10 KiB
/* SPDX-License-Identifier: GPL-2.0 */ |
|
#ifndef _AHA152X_H |
|
#define _AHA152X_H |
|
|
|
/* |
|
* $Id: aha152x.h,v 2.7 2004/01/24 11:39:03 fischer Exp $ |
|
*/ |
|
|
|
/* number of queueable commands |
|
(unless we support more than 1 cmd_per_lun this should do) */ |
|
#define AHA152X_MAXQUEUE 7 |
|
|
|
#define AHA152X_REVID "Adaptec 152x SCSI driver; $Revision: 2.7 $" |
|
|
|
/* port addresses */ |
|
#define SCSISEQ (HOSTIOPORT0+0x00) /* SCSI sequence control */ |
|
#define SXFRCTL0 (HOSTIOPORT0+0x01) /* SCSI transfer control 0 */ |
|
#define SXFRCTL1 (HOSTIOPORT0+0x02) /* SCSI transfer control 1 */ |
|
#define SCSISIG (HOSTIOPORT0+0x03) /* SCSI signal in/out */ |
|
#define SCSIRATE (HOSTIOPORT0+0x04) /* SCSI rate control */ |
|
#define SELID (HOSTIOPORT0+0x05) /* selection/reselection ID */ |
|
#define SCSIID SELID /* SCSI ID */ |
|
#define SCSIDAT (HOSTIOPORT0+0x06) /* SCSI latched data */ |
|
#define SCSIBUS (HOSTIOPORT0+0x07) /* SCSI data bus */ |
|
#define STCNT0 (HOSTIOPORT0+0x08) /* SCSI transfer count 0 */ |
|
#define STCNT1 (HOSTIOPORT0+0x09) /* SCSI transfer count 1 */ |
|
#define STCNT2 (HOSTIOPORT0+0x0a) /* SCSI transfer count 2 */ |
|
#define SSTAT0 (HOSTIOPORT0+0x0b) /* SCSI interrupt status 0 */ |
|
#define SSTAT1 (HOSTIOPORT0+0x0c) /* SCSI interrupt status 1 */ |
|
#define SSTAT2 (HOSTIOPORT0+0x0d) /* SCSI interrupt status 2 */ |
|
#define SCSITEST (HOSTIOPORT0+0x0e) /* SCSI test control */ |
|
#define SSTAT3 SCSITEST /* SCSI interrupt status 3 */ |
|
#define SSTAT4 (HOSTIOPORT0+0x0f) /* SCSI status 4 */ |
|
#define SIMODE0 (HOSTIOPORT1+0x10) /* SCSI interrupt mode 0 */ |
|
#define SIMODE1 (HOSTIOPORT1+0x11) /* SCSI interrupt mode 1 */ |
|
#define DMACNTRL0 (HOSTIOPORT1+0x12) /* DMA control 0 */ |
|
#define DMACNTRL1 (HOSTIOPORT1+0x13) /* DMA control 1 */ |
|
#define DMASTAT (HOSTIOPORT1+0x14) /* DMA status */ |
|
#define FIFOSTAT (HOSTIOPORT1+0x15) /* FIFO status */ |
|
#define DATAPORT (HOSTIOPORT1+0x16) /* DATA port */ |
|
#define BRSTCNTRL (HOSTIOPORT1+0x18) /* burst control */ |
|
#define PORTA (HOSTIOPORT1+0x1a) /* PORT A */ |
|
#define PORTB (HOSTIOPORT1+0x1b) /* PORT B */ |
|
#define REV (HOSTIOPORT1+0x1c) /* revision */ |
|
#define STACK (HOSTIOPORT1+0x1d) /* stack */ |
|
#define TEST (HOSTIOPORT1+0x1e) /* test register */ |
|
|
|
#define IO_RANGE 0x20 |
|
|
|
/* used in aha152x_porttest */ |
|
#define O_PORTA 0x1a /* PORT A */ |
|
#define O_PORTB 0x1b /* PORT B */ |
|
#define O_DMACNTRL1 0x13 /* DMA control 1 */ |
|
#define O_STACK 0x1d /* stack */ |
|
|
|
/* used in tc1550_porttest */ |
|
#define O_TC_PORTA 0x0a /* PORT A */ |
|
#define O_TC_PORTB 0x0b /* PORT B */ |
|
#define O_TC_DMACNTRL1 0x03 /* DMA control 1 */ |
|
#define O_TC_STACK 0x0d /* stack */ |
|
|
|
/* bits and bitmasks to ports */ |
|
|
|
/* SCSI sequence control */ |
|
#define TEMODEO 0x80 |
|
#define ENSELO 0x40 |
|
#define ENSELI 0x20 |
|
#define ENRESELI 0x10 |
|
#define ENAUTOATNO 0x08 |
|
#define ENAUTOATNI 0x04 |
|
#define ENAUTOATNP 0x02 |
|
#define SCSIRSTO 0x01 |
|
|
|
/* SCSI transfer control 0 */ |
|
#define SCSIEN 0x80 |
|
#define DMAEN 0x40 |
|
#define CH1 0x20 |
|
#define CLRSTCNT 0x10 |
|
#define SPIOEN 0x08 |
|
#define CLRCH1 0x02 |
|
|
|
/* SCSI transfer control 1 */ |
|
#define BITBUCKET 0x80 |
|
#define SWRAPEN 0x40 |
|
#define ENSPCHK 0x20 |
|
#define STIMESEL 0x18 /* mask */ |
|
#define STIMESEL_ 3 |
|
#define ENSTIMER 0x04 |
|
#define BYTEALIGN 0x02 |
|
|
|
/* SCSI signal IN */ |
|
#define SIG_CDI 0x80 |
|
#define SIG_IOI 0x40 |
|
#define SIG_MSGI 0x20 |
|
#define SIG_ATNI 0x10 |
|
#define SIG_SELI 0x08 |
|
#define SIG_BSYI 0x04 |
|
#define SIG_REQI 0x02 |
|
#define SIG_ACKI 0x01 |
|
|
|
/* SCSI Phases */ |
|
#define P_MASK (SIG_MSGI|SIG_CDI|SIG_IOI) |
|
#define P_DATAO (0) |
|
#define P_DATAI (SIG_IOI) |
|
#define P_CMD (SIG_CDI) |
|
#define P_STATUS (SIG_CDI|SIG_IOI) |
|
#define P_MSGO (SIG_MSGI|SIG_CDI) |
|
#define P_MSGI (SIG_MSGI|SIG_CDI|SIG_IOI) |
|
|
|
/* SCSI signal OUT */ |
|
#define SIG_CDO 0x80 |
|
#define SIG_IOO 0x40 |
|
#define SIG_MSGO 0x20 |
|
#define SIG_ATNO 0x10 |
|
#define SIG_SELO 0x08 |
|
#define SIG_BSYO 0x04 |
|
#define SIG_REQO 0x02 |
|
#define SIG_ACKO 0x01 |
|
|
|
/* SCSI rate control */ |
|
#define SXFR 0x70 /* mask */ |
|
#define SXFR_ 4 |
|
#define SOFS 0x0f /* mask */ |
|
|
|
/* SCSI ID */ |
|
#define OID 0x70 |
|
#define OID_ 4 |
|
#define TID 0x07 |
|
|
|
/* SCSI transfer count */ |
|
#define GETSTCNT() ( (GETPORT(STCNT2)<<16) \ |
|
+ (GETPORT(STCNT1)<< 8) \ |
|
+ GETPORT(STCNT0) ) |
|
|
|
#define SETSTCNT(X) { SETPORT(STCNT2, ((X) & 0xFF0000) >> 16); \ |
|
SETPORT(STCNT1, ((X) & 0x00FF00) >> 8); \ |
|
SETPORT(STCNT0, ((X) & 0x0000FF) ); } |
|
|
|
/* SCSI interrupt status */ |
|
#define TARGET 0x80 |
|
#define SELDO 0x40 |
|
#define SELDI 0x20 |
|
#define SELINGO 0x10 |
|
#define SWRAP 0x08 |
|
#define SDONE 0x04 |
|
#define SPIORDY 0x02 |
|
#define DMADONE 0x01 |
|
|
|
#define SETSDONE 0x80 |
|
#define CLRSELDO 0x40 |
|
#define CLRSELDI 0x20 |
|
#define CLRSELINGO 0x10 |
|
#define CLRSWRAP 0x08 |
|
#define CLRSDONE 0x04 |
|
#define CLRSPIORDY 0x02 |
|
#define CLRDMADONE 0x01 |
|
|
|
/* SCSI status 1 */ |
|
#define SELTO 0x80 |
|
#define ATNTARG 0x40 |
|
#define SCSIRSTI 0x20 |
|
#define PHASEMIS 0x10 |
|
#define BUSFREE 0x08 |
|
#define SCSIPERR 0x04 |
|
#define PHASECHG 0x02 |
|
#define REQINIT 0x01 |
|
|
|
#define CLRSELTIMO 0x80 |
|
#define CLRATNO 0x40 |
|
#define CLRSCSIRSTI 0x20 |
|
#define CLRBUSFREE 0x08 |
|
#define CLRSCSIPERR 0x04 |
|
#define CLRPHASECHG 0x02 |
|
#define CLRREQINIT 0x01 |
|
|
|
/* SCSI status 2 */ |
|
#define SOFFSET 0x20 |
|
#define SEMPTY 0x10 |
|
#define SFULL 0x08 |
|
#define SFCNT 0x07 /* mask */ |
|
|
|
/* SCSI status 3 */ |
|
#define SCSICNT 0xf0 /* mask */ |
|
#define SCSICNT_ 4 |
|
#define OFFCNT 0x0f /* mask */ |
|
|
|
/* SCSI TEST control */ |
|
#define SCTESTU 0x08 |
|
#define SCTESTD 0x04 |
|
#define STCTEST 0x01 |
|
|
|
/* SCSI status 4 */ |
|
#define SYNCERR 0x04 |
|
#define FWERR 0x02 |
|
#define FRERR 0x01 |
|
|
|
#define CLRSYNCERR 0x04 |
|
#define CLRFWERR 0x02 |
|
#define CLRFRERR 0x01 |
|
|
|
/* SCSI interrupt mode 0 */ |
|
#define ENSELDO 0x40 |
|
#define ENSELDI 0x20 |
|
#define ENSELINGO 0x10 |
|
#define ENSWRAP 0x08 |
|
#define ENSDONE 0x04 |
|
#define ENSPIORDY 0x02 |
|
#define ENDMADONE 0x01 |
|
|
|
/* SCSI interrupt mode 1 */ |
|
#define ENSELTIMO 0x80 |
|
#define ENATNTARG 0x40 |
|
#define ENSCSIRST 0x20 |
|
#define ENPHASEMIS 0x10 |
|
#define ENBUSFREE 0x08 |
|
#define ENSCSIPERR 0x04 |
|
#define ENPHASECHG 0x02 |
|
#define ENREQINIT 0x01 |
|
|
|
/* DMA control 0 */ |
|
#define ENDMA 0x80 |
|
#define _8BIT 0x40 |
|
#define DMA 0x20 |
|
#define WRITE_READ 0x08 |
|
#define INTEN 0x04 |
|
#define RSTFIFO 0x02 |
|
#define SWINT 0x01 |
|
|
|
/* DMA control 1 */ |
|
#define PWRDWN 0x80 |
|
#define STK 0x07 /* mask */ |
|
|
|
/* DMA status */ |
|
#define ATDONE 0x80 |
|
#define WORDRDY 0x40 |
|
#define INTSTAT 0x20 |
|
#define DFIFOFULL 0x10 |
|
#define DFIFOEMP 0x08 |
|
|
|
/* BURST control */ |
|
#define BON 0xf0 |
|
#define BOFF 0x0f |
|
|
|
/* TEST REGISTER */ |
|
#define BOFFTMR 0x40 |
|
#define BONTMR 0x20 |
|
#define STCNTH 0x10 |
|
#define STCNTM 0x08 |
|
#define STCNTL 0x04 |
|
#define SCSIBLK 0x02 |
|
#define DMABLK 0x01 |
|
|
|
/* On the AHA-152x board PORTA and PORTB contain |
|
some information about the board's configuration. */ |
|
typedef union { |
|
struct { |
|
unsigned reserved:2; /* reserved */ |
|
unsigned tardisc:1; /* Target disconnect: 0=disabled, 1=enabled */ |
|
unsigned syncneg:1; /* Initial sync neg: 0=disabled, 1=enabled */ |
|
unsigned msgclasses:2; /* Message classes |
|
0=#4 |
|
1=#0, #1, #2, #3, #4 |
|
2=#0, #3, #4 |
|
3=#0, #4 |
|
*/ |
|
unsigned boot:1; /* boot: 0=disabled, 1=enabled */ |
|
unsigned dma:1; /* Transfer mode: 0=PIO; 1=DMA */ |
|
unsigned id:3; /* SCSI-id */ |
|
unsigned irq:2; /* IRQ-Channel: 0,3=12, 1=10, 2=11 */ |
|
unsigned dmachan:2; /* DMA-Channel: 0=0, 1=5, 2=6, 3=7 */ |
|
unsigned parity:1; /* SCSI-parity: 1=enabled 0=disabled */ |
|
} fields; |
|
unsigned short port; |
|
} aha152x_config ; |
|
|
|
#define cf_parity fields.parity |
|
#define cf_dmachan fields.dmachan |
|
#define cf_irq fields.irq |
|
#define cf_id fields.id |
|
#define cf_dma fields.dma |
|
#define cf_boot fields.boot |
|
#define cf_msgclasses fields.msgclasses |
|
#define cf_syncneg fields.syncneg |
|
#define cf_tardisc fields.tardisc |
|
#define cf_port port |
|
|
|
/* Some macros to manipulate ports and their bits */ |
|
|
|
#define SETPORT(PORT, VAL) outb( (VAL), (PORT) ) |
|
#define GETPORT(PORT) inb( PORT ) |
|
#define SETBITS(PORT, BITS) outb( (inb(PORT) | (BITS)), (PORT) ) |
|
#define CLRBITS(PORT, BITS) outb( (inb(PORT) & ~(BITS)), (PORT) ) |
|
#define TESTHI(PORT, BITS) ((inb(PORT) & (BITS)) == (BITS)) |
|
#define TESTLO(PORT, BITS) ((inb(PORT) & (BITS)) == 0) |
|
|
|
#define SETRATE(RATE) SETPORT(SCSIRATE,(RATE) & 0x7f) |
|
|
|
#if defined(AHA152X_DEBUG) |
|
enum { |
|
debug_procinfo = 0x0001, |
|
debug_queue = 0x0002, |
|
debug_locking = 0x0004, |
|
debug_intr = 0x0008, |
|
debug_selection = 0x0010, |
|
debug_msgo = 0x0020, |
|
debug_msgi = 0x0040, |
|
debug_status = 0x0080, |
|
debug_cmd = 0x0100, |
|
debug_datai = 0x0200, |
|
debug_datao = 0x0400, |
|
debug_eh = 0x0800, |
|
debug_done = 0x1000, |
|
debug_phases = 0x2000, |
|
}; |
|
#endif |
|
|
|
/* for the pcmcia stub */ |
|
struct aha152x_setup { |
|
int io_port; |
|
int irq; |
|
int scsiid; |
|
int reconnect; |
|
int parity; |
|
int synchronous; |
|
int delay; |
|
int ext_trans; |
|
int tc1550; |
|
#if defined(AHA152X_DEBUG) |
|
int debug; |
|
#endif |
|
char *conf; |
|
}; |
|
|
|
struct Scsi_Host *aha152x_probe_one(struct aha152x_setup *); |
|
void aha152x_release(struct Scsi_Host *); |
|
int aha152x_host_reset_host(struct Scsi_Host *); |
|
|
|
#endif /* _AHA152X_H */
|
|
|