mirror of https://github.com/Qortal/Brooklyn
You can not select more than 25 topics
Topics must start with a letter or number, can include dashes ('-') and can be up to 35 characters long.
662 lines
11 KiB
662 lines
11 KiB
// SPDX-License-Identifier: (GPL-2.0 OR MIT) |
|
// |
|
// Device Tree file for LX2160A BLUEBOX3 |
|
// |
|
// Copyright 2020-2021 NXP |
|
|
|
/dts-v1/; |
|
|
|
#include "fsl-lx2160a.dtsi" |
|
|
|
/ { |
|
model = "NXP Layerscape LX2160ABLUEBOX3"; |
|
compatible = "fsl,lx2160a-bluebox3", "fsl,lx2160a"; |
|
|
|
aliases { |
|
crypto = &crypto; |
|
mmc0 = &esdhc0; |
|
mmc1 = &esdhc1; |
|
serial0 = &uart0; |
|
}; |
|
|
|
chosen { |
|
stdout-path = "serial0:115200n8"; |
|
}; |
|
|
|
sb_3v3: regulator-sb3v3 { |
|
compatible = "regulator-fixed"; |
|
regulator-name = "MC34717-3.3VSB"; |
|
regulator-min-microvolt = <3300000>; |
|
regulator-max-microvolt = <3300000>; |
|
regulator-boot-on; |
|
regulator-always-on; |
|
}; |
|
}; |
|
|
|
&can0 { |
|
status = "okay"; |
|
|
|
can-transceiver { |
|
max-bitrate = <5000000>; |
|
}; |
|
}; |
|
|
|
&can1 { |
|
status = "okay"; |
|
|
|
can-transceiver { |
|
max-bitrate = <5000000>; |
|
}; |
|
}; |
|
|
|
&crypto { |
|
status = "okay"; |
|
}; |
|
|
|
&dpmac5 { |
|
phy-handle = <&aqr113c_phy1>; |
|
phy-mode = "usxgmii"; |
|
managed = "in-band-status"; |
|
}; |
|
|
|
&dpmac6 { |
|
phy-handle = <&aqr113c_phy2>; |
|
phy-mode = "usxgmii"; |
|
managed = "in-band-status"; |
|
}; |
|
|
|
&dpmac9 { |
|
phy-handle = <&aqr113c_phy3>; |
|
phy-mode = "usxgmii"; |
|
managed = "in-band-status"; |
|
}; |
|
|
|
&dpmac10 { |
|
phy-handle = <&aqr113c_phy4>; |
|
phy-mode = "usxgmii"; |
|
managed = "in-band-status"; |
|
}; |
|
|
|
&dpmac17 { |
|
phy-mode = "rgmii"; |
|
status = "okay"; |
|
|
|
fixed-link { |
|
speed = <1000>; |
|
full-duplex; |
|
}; |
|
}; |
|
|
|
&dpmac18 { |
|
phy-mode = "rgmii"; |
|
status = "okay"; |
|
|
|
fixed-link { |
|
speed = <1000>; |
|
full-duplex; |
|
}; |
|
}; |
|
|
|
&emdio1 { |
|
status = "okay"; |
|
|
|
aqr113c_phy2: ethernet-phy@0 { |
|
compatible = "ethernet-phy-ieee802.3-c45"; |
|
reg = <0x0>; |
|
/* IRQ_10G_PHY2 */ |
|
interrupts-extended = <&extirq 3 IRQ_TYPE_LEVEL_LOW>; |
|
}; |
|
|
|
aqr113c_phy1: ethernet-phy@8 { |
|
compatible = "ethernet-phy-ieee802.3-c45"; |
|
reg = <0x8>; |
|
/* IRQ_10G_PHY1 */ |
|
interrupts-extended = <&extirq 2 IRQ_TYPE_LEVEL_LOW>; |
|
}; |
|
|
|
sw1_mii3_phy: ethernet-phy@5 { |
|
/* AR8035 */ |
|
compatible = "ethernet-phy-id004d.d072"; |
|
reg = <0x5>; |
|
interrupts-extended = <&extirq 6 IRQ_TYPE_LEVEL_LOW>; |
|
}; |
|
|
|
sw2_mii3_phy: ethernet-phy@6 { |
|
/* AR8035 */ |
|
compatible = "ethernet-phy-id004d.d072"; |
|
reg = <0x6>; |
|
interrupts-extended = <&extirq 7 IRQ_TYPE_LEVEL_LOW>; |
|
}; |
|
}; |
|
|
|
&emdio2 { |
|
status = "okay"; |
|
|
|
aqr113c_phy4: ethernet-phy@0 { |
|
compatible = "ethernet-phy-ieee802.3-c45"; |
|
reg = <0x0>; |
|
/* IRQ_10G_PHY4 */ |
|
interrupts-extended = <&extirq 5 IRQ_TYPE_LEVEL_LOW>; |
|
}; |
|
|
|
aqr113c_phy3: ethernet-phy@8 { |
|
compatible = "ethernet-phy-ieee802.3-c45"; |
|
reg = <0x8>; |
|
/* IRQ_10G_PHY3 */ |
|
interrupts-extended = <&extirq 4 IRQ_TYPE_LEVEL_LOW>; |
|
}; |
|
}; |
|
|
|
&esdhc0 { |
|
sd-uhs-sdr104; |
|
sd-uhs-sdr50; |
|
sd-uhs-sdr25; |
|
sd-uhs-sdr12; |
|
status = "okay"; |
|
}; |
|
|
|
&esdhc1 { |
|
mmc-hs200-1_8v; |
|
mmc-hs400-1_8v; |
|
bus-width = <8>; |
|
status = "okay"; |
|
}; |
|
|
|
&fspi { |
|
status = "okay"; |
|
|
|
mt35xu512aba0: flash@0 { |
|
compatible = "jedec,spi-nor"; |
|
#address-cells = <1>; |
|
#size-cells = <1>; |
|
reg = <0>; |
|
m25p,fast-read; |
|
spi-max-frequency = <50000000>; |
|
spi-rx-bus-width = <8>; |
|
spi-tx-bus-width = <8>; |
|
}; |
|
|
|
mt35xu512aba1: flash@1 { |
|
compatible = "jedec,spi-nor"; |
|
#address-cells = <1>; |
|
#size-cells = <1>; |
|
reg = <1>; |
|
m25p,fast-read; |
|
spi-max-frequency = <50000000>; |
|
spi-rx-bus-width = <8>; |
|
spi-tx-bus-width = <8>; |
|
}; |
|
}; |
|
|
|
&i2c0 { |
|
status = "okay"; |
|
|
|
i2c-mux@77 { |
|
compatible = "nxp,pca9547"; |
|
reg = <0x77>; |
|
#address-cells = <1>; |
|
#size-cells = <0>; |
|
|
|
i2c@2 { |
|
#address-cells = <1>; |
|
#size-cells = <0>; |
|
reg = <0x2>; |
|
|
|
power-monitor@40 { |
|
compatible = "ti,ina220"; |
|
reg = <0x40>; |
|
shunt-resistor = <500>; |
|
}; |
|
}; |
|
|
|
i2c@3 { |
|
#address-cells = <1>; |
|
#size-cells = <0>; |
|
reg = <0x3>; |
|
|
|
temp2: temperature-sensor@48 { |
|
compatible = "nxp,sa56004"; |
|
reg = <0x48>; |
|
vcc-supply = <&sb_3v3>; |
|
#thermal-sensor-cells = <1>; |
|
}; |
|
|
|
temp1: temperature-sensor@4c { |
|
compatible = "nxp,sa56004"; |
|
reg = <0x4c>; |
|
vcc-supply = <&sb_3v3>; |
|
#thermal-sensor-cells = <1>; |
|
}; |
|
}; |
|
|
|
i2c@4 { |
|
#address-cells = <1>; |
|
#size-cells = <0>; |
|
reg = <0x4>; |
|
|
|
rtc@51 { |
|
compatible = "nxp,pcf2129"; |
|
reg = <0x51>; |
|
interrupts-extended = <&extirq 11 IRQ_TYPE_LEVEL_LOW>; |
|
}; |
|
}; |
|
|
|
i2c@7 { |
|
#address-cells = <1>; |
|
#size-cells = <0>; |
|
reg = <0x7>; |
|
|
|
i2c-mux@75 { |
|
compatible = "nxp,pca9547"; |
|
reg = <0x75>; |
|
#address-cells = <1>; |
|
#size-cells = <0>; |
|
|
|
i2c@0 { |
|
#address-cells = <1>; |
|
#size-cells = <0>; |
|
reg = <0x0>; |
|
|
|
spi_bridge: spi@28 { |
|
compatible = "nxp,sc18is602b"; |
|
reg = <0x28>; |
|
#address-cells = <1>; |
|
#size-cells = <0>; |
|
}; |
|
}; |
|
}; |
|
}; |
|
}; |
|
}; |
|
|
|
&i2c5 { |
|
status = "okay"; |
|
|
|
i2c-mux@77 { |
|
compatible = "nxp,pca9846"; |
|
reg = <0x77>; |
|
#address-cells = <1>; |
|
#size-cells = <0>; |
|
|
|
i2c@1 { |
|
#address-cells = <1>; |
|
#size-cells = <0>; |
|
reg = <0x1>; |
|
|
|
/* The I2C multiplexer and temperature sensors are on |
|
* the T6 riser card. |
|
*/ |
|
i2c-mux@70 { |
|
compatible = "nxp,pca9548"; |
|
reg = <0x70>; |
|
#address-cells = <1>; |
|
#size-cells = <0>; |
|
|
|
i2c@6 { |
|
#address-cells = <1>; |
|
#size-cells = <0>; |
|
reg = <0x6>; |
|
|
|
q12: temperature-sensor@4c { |
|
compatible = "nxp,sa56004"; |
|
reg = <0x4c>; |
|
vcc-supply = <&sb_3v3>; |
|
#thermal-sensor-cells = <1>; |
|
}; |
|
}; |
|
|
|
i2c@7 { |
|
#address-cells = <1>; |
|
#size-cells = <0>; |
|
reg = <0x7>; |
|
|
|
q11: temperature-sensor@4c { |
|
compatible = "nxp,sa56004"; |
|
reg = <0x4c>; |
|
vcc-supply = <&sb_3v3>; |
|
#thermal-sensor-cells = <1>; |
|
}; |
|
|
|
q13: temperature-sensor@48 { |
|
compatible = "nxp,sa56004"; |
|
reg = <0x48>; |
|
vcc-supply = <&sb_3v3>; |
|
#thermal-sensor-cells = <1>; |
|
}; |
|
|
|
q14: temperature-sensor@4a { |
|
compatible = "nxp,sa56004"; |
|
reg = <0x4a>; |
|
vcc-supply = <&sb_3v3>; |
|
#thermal-sensor-cells = <1>; |
|
}; |
|
}; |
|
}; |
|
}; |
|
}; |
|
}; |
|
|
|
&pcs_mdio5 { |
|
status = "okay"; |
|
}; |
|
|
|
&pcs_mdio6 { |
|
status = "okay"; |
|
}; |
|
|
|
&pcs_mdio9 { |
|
status = "okay"; |
|
}; |
|
|
|
&pcs_mdio10 { |
|
status = "okay"; |
|
}; |
|
|
|
&spi_bridge { |
|
sw1: ethernet-switch@0 { |
|
compatible = "nxp,sja1110a"; |
|
reg = <0>; |
|
spi-max-frequency = <4000000>; |
|
spi-cpol; |
|
dsa,member = <0 0>; |
|
|
|
ethernet-ports { |
|
#address-cells = <1>; |
|
#size-cells = <0>; |
|
|
|
/* Microcontroller port */ |
|
port@0 { |
|
reg = <0>; |
|
status = "disabled"; |
|
}; |
|
|
|
/* SW1_P1 */ |
|
port@1 { |
|
reg = <1>; |
|
label = "con_2x20"; |
|
phy-mode = "sgmii"; |
|
|
|
fixed-link { |
|
speed = <1000>; |
|
full-duplex; |
|
}; |
|
}; |
|
|
|
port@2 { |
|
reg = <2>; |
|
ethernet = <&dpmac17>; |
|
phy-mode = "rgmii-id"; |
|
rx-internal-delay-ps = <2000>; |
|
tx-internal-delay-ps = <2000>; |
|
|
|
fixed-link { |
|
speed = <1000>; |
|
full-duplex; |
|
}; |
|
}; |
|
|
|
port@3 { |
|
reg = <3>; |
|
label = "1ge_p1"; |
|
phy-mode = "rgmii-id"; |
|
phy-handle = <&sw1_mii3_phy>; |
|
}; |
|
|
|
sw1p4: port@4 { |
|
reg = <4>; |
|
link = <&sw2p1>; |
|
phy-mode = "sgmii"; |
|
|
|
fixed-link { |
|
speed = <1000>; |
|
full-duplex; |
|
}; |
|
}; |
|
|
|
port@5 { |
|
reg = <5>; |
|
label = "trx1"; |
|
phy-mode = "internal"; |
|
phy-handle = <&sw1_port5_base_t1_phy>; |
|
}; |
|
|
|
port@6 { |
|
reg = <6>; |
|
label = "trx2"; |
|
phy-mode = "internal"; |
|
phy-handle = <&sw1_port6_base_t1_phy>; |
|
}; |
|
|
|
port@7 { |
|
reg = <7>; |
|
label = "trx3"; |
|
phy-mode = "internal"; |
|
phy-handle = <&sw1_port7_base_t1_phy>; |
|
}; |
|
|
|
port@8 { |
|
reg = <8>; |
|
label = "trx4"; |
|
phy-mode = "internal"; |
|
phy-handle = <&sw1_port8_base_t1_phy>; |
|
}; |
|
|
|
port@9 { |
|
reg = <9>; |
|
label = "trx5"; |
|
phy-mode = "internal"; |
|
phy-handle = <&sw1_port9_base_t1_phy>; |
|
}; |
|
|
|
port@a { |
|
reg = <10>; |
|
label = "trx6"; |
|
phy-mode = "internal"; |
|
phy-handle = <&sw1_port10_base_t1_phy>; |
|
}; |
|
}; |
|
|
|
mdios { |
|
#address-cells = <1>; |
|
#size-cells = <0>; |
|
|
|
mdio@0 { |
|
compatible = "nxp,sja1110-base-t1-mdio"; |
|
#address-cells = <1>; |
|
#size-cells = <0>; |
|
reg = <0>; |
|
|
|
sw1_port5_base_t1_phy: ethernet-phy@1 { |
|
compatible = "ethernet-phy-ieee802.3-c45"; |
|
reg = <0x1>; |
|
}; |
|
|
|
sw1_port6_base_t1_phy: ethernet-phy@2 { |
|
compatible = "ethernet-phy-ieee802.3-c45"; |
|
reg = <0x2>; |
|
}; |
|
|
|
sw1_port7_base_t1_phy: ethernet-phy@3 { |
|
compatible = "ethernet-phy-ieee802.3-c45"; |
|
reg = <0x3>; |
|
}; |
|
|
|
sw1_port8_base_t1_phy: ethernet-phy@4 { |
|
compatible = "ethernet-phy-ieee802.3-c45"; |
|
reg = <0x4>; |
|
}; |
|
|
|
sw1_port9_base_t1_phy: ethernet-phy@5 { |
|
compatible = "ethernet-phy-ieee802.3-c45"; |
|
reg = <0x5>; |
|
}; |
|
|
|
sw1_port10_base_t1_phy: ethernet-phy@6 { |
|
compatible = "ethernet-phy-ieee802.3-c45"; |
|
reg = <0x6>; |
|
}; |
|
}; |
|
}; |
|
}; |
|
|
|
sw2: ethernet-switch@2 { |
|
compatible = "nxp,sja1110a"; |
|
reg = <2>; |
|
spi-max-frequency = <4000000>; |
|
spi-cpol; |
|
dsa,member = <0 1>; |
|
|
|
ethernet-ports { |
|
#address-cells = <1>; |
|
#size-cells = <0>; |
|
|
|
/* Microcontroller port */ |
|
port@0 { |
|
reg = <0>; |
|
status = "disabled"; |
|
}; |
|
|
|
sw2p1: port@1 { |
|
reg = <1>; |
|
link = <&sw1p4>; |
|
phy-mode = "sgmii"; |
|
|
|
fixed-link { |
|
speed = <1000>; |
|
full-duplex; |
|
}; |
|
}; |
|
|
|
port@2 { |
|
reg = <2>; |
|
ethernet = <&dpmac18>; |
|
phy-mode = "rgmii-id"; |
|
rx-internal-delay-ps = <2000>; |
|
tx-internal-delay-ps = <2000>; |
|
|
|
fixed-link { |
|
speed = <1000>; |
|
full-duplex; |
|
}; |
|
}; |
|
|
|
port@3 { |
|
reg = <3>; |
|
label = "1ge_p2"; |
|
phy-mode = "rgmii-id"; |
|
phy-handle = <&sw2_mii3_phy>; |
|
}; |
|
|
|
port@4 { |
|
reg = <4>; |
|
label = "to_sw3"; |
|
phy-mode = "2500base-x"; |
|
|
|
fixed-link { |
|
speed = <2500>; |
|
full-duplex; |
|
}; |
|
}; |
|
|
|
port@5 { |
|
reg = <5>; |
|
label = "trx7"; |
|
phy-mode = "internal"; |
|
phy-handle = <&sw2_port5_base_t1_phy>; |
|
}; |
|
|
|
port@6 { |
|
reg = <6>; |
|
label = "trx8"; |
|
phy-mode = "internal"; |
|
phy-handle = <&sw2_port6_base_t1_phy>; |
|
}; |
|
|
|
port@7 { |
|
reg = <7>; |
|
label = "trx9"; |
|
phy-mode = "internal"; |
|
phy-handle = <&sw2_port7_base_t1_phy>; |
|
}; |
|
|
|
port@8 { |
|
reg = <8>; |
|
label = "trx10"; |
|
phy-mode = "internal"; |
|
phy-handle = <&sw2_port8_base_t1_phy>; |
|
}; |
|
|
|
port@9 { |
|
reg = <9>; |
|
label = "trx11"; |
|
phy-mode = "internal"; |
|
phy-handle = <&sw2_port9_base_t1_phy>; |
|
}; |
|
|
|
port@a { |
|
reg = <10>; |
|
label = "trx12"; |
|
phy-mode = "internal"; |
|
phy-handle = <&sw2_port10_base_t1_phy>; |
|
}; |
|
}; |
|
|
|
mdios { |
|
#address-cells = <1>; |
|
#size-cells = <0>; |
|
|
|
mdio@0 { |
|
compatible = "nxp,sja1110-base-t1-mdio"; |
|
#address-cells = <1>; |
|
#size-cells = <0>; |
|
reg = <0>; |
|
|
|
sw2_port5_base_t1_phy: ethernet-phy@1 { |
|
compatible = "ethernet-phy-ieee802.3-c45"; |
|
reg = <0x1>; |
|
}; |
|
|
|
sw2_port6_base_t1_phy: ethernet-phy@2 { |
|
compatible = "ethernet-phy-ieee802.3-c45"; |
|
reg = <0x2>; |
|
}; |
|
|
|
sw2_port7_base_t1_phy: ethernet-phy@3 { |
|
compatible = "ethernet-phy-ieee802.3-c45"; |
|
reg = <0x3>; |
|
}; |
|
|
|
sw2_port8_base_t1_phy: ethernet-phy@4 { |
|
compatible = "ethernet-phy-ieee802.3-c45"; |
|
reg = <0x4>; |
|
}; |
|
|
|
sw2_port9_base_t1_phy: ethernet-phy@5 { |
|
compatible = "ethernet-phy-ieee802.3-c45"; |
|
reg = <0x5>; |
|
}; |
|
|
|
sw2_port10_base_t1_phy: ethernet-phy@6 { |
|
compatible = "ethernet-phy-ieee802.3-c45"; |
|
reg = <0x6>; |
|
}; |
|
}; |
|
}; |
|
}; |
|
}; |
|
|
|
&uart0 { |
|
status = "okay"; |
|
}; |
|
|
|
&uart1 { |
|
status = "okay"; |
|
}; |
|
|
|
&usb0 { |
|
status = "okay"; |
|
}; |
|
|
|
&usb1 { |
|
status = "okay"; |
|
};
|
|
|