mirror of https://github.com/Qortal/Brooklyn
You can not select more than 25 topics
Topics must start with a letter or number, can include dashes ('-') and can be up to 35 characters long.
1028 lines
26 KiB
1028 lines
26 KiB
// SPDX-License-Identifier: GPL-2.0-only |
|
/* |
|
* Copyright (C) 2004-2013 Synopsys, Inc. (www.synopsys.com) |
|
* |
|
* Driver for the ARC EMAC 10100 (hardware revision 5) |
|
* |
|
* Contributors: |
|
* Amit Bhor |
|
* Sameer Dhavale |
|
* Vineet Gupta |
|
*/ |
|
|
|
#include <linux/crc32.h> |
|
#include <linux/etherdevice.h> |
|
#include <linux/interrupt.h> |
|
#include <linux/io.h> |
|
#include <linux/module.h> |
|
#include <linux/of_address.h> |
|
#include <linux/of_irq.h> |
|
#include <linux/of_mdio.h> |
|
#include <linux/of_net.h> |
|
#include <linux/of_platform.h> |
|
|
|
#include "emac.h" |
|
|
|
static void arc_emac_restart(struct net_device *ndev); |
|
|
|
/** |
|
* arc_emac_tx_avail - Return the number of available slots in the tx ring. |
|
* @priv: Pointer to ARC EMAC private data structure. |
|
* |
|
* returns: the number of slots available for transmission in tx the ring. |
|
*/ |
|
static inline int arc_emac_tx_avail(struct arc_emac_priv *priv) |
|
{ |
|
return (priv->txbd_dirty + TX_BD_NUM - priv->txbd_curr - 1) % TX_BD_NUM; |
|
} |
|
|
|
/** |
|
* arc_emac_adjust_link - Adjust the PHY link duplex. |
|
* @ndev: Pointer to the net_device structure. |
|
* |
|
* This function is called to change the duplex setting after auto negotiation |
|
* is done by the PHY. |
|
*/ |
|
static void arc_emac_adjust_link(struct net_device *ndev) |
|
{ |
|
struct arc_emac_priv *priv = netdev_priv(ndev); |
|
struct phy_device *phy_dev = ndev->phydev; |
|
unsigned int reg, state_changed = 0; |
|
|
|
if (priv->link != phy_dev->link) { |
|
priv->link = phy_dev->link; |
|
state_changed = 1; |
|
} |
|
|
|
if (priv->speed != phy_dev->speed) { |
|
priv->speed = phy_dev->speed; |
|
state_changed = 1; |
|
if (priv->set_mac_speed) |
|
priv->set_mac_speed(priv, priv->speed); |
|
} |
|
|
|
if (priv->duplex != phy_dev->duplex) { |
|
reg = arc_reg_get(priv, R_CTRL); |
|
|
|
if (phy_dev->duplex == DUPLEX_FULL) |
|
reg |= ENFL_MASK; |
|
else |
|
reg &= ~ENFL_MASK; |
|
|
|
arc_reg_set(priv, R_CTRL, reg); |
|
priv->duplex = phy_dev->duplex; |
|
state_changed = 1; |
|
} |
|
|
|
if (state_changed) |
|
phy_print_status(phy_dev); |
|
} |
|
|
|
/** |
|
* arc_emac_get_drvinfo - Get EMAC driver information. |
|
* @ndev: Pointer to net_device structure. |
|
* @info: Pointer to ethtool_drvinfo structure. |
|
* |
|
* This implements ethtool command for getting the driver information. |
|
* Issue "ethtool -i ethX" under linux prompt to execute this function. |
|
*/ |
|
static void arc_emac_get_drvinfo(struct net_device *ndev, |
|
struct ethtool_drvinfo *info) |
|
{ |
|
struct arc_emac_priv *priv = netdev_priv(ndev); |
|
|
|
strlcpy(info->driver, priv->drv_name, sizeof(info->driver)); |
|
} |
|
|
|
static const struct ethtool_ops arc_emac_ethtool_ops = { |
|
.get_drvinfo = arc_emac_get_drvinfo, |
|
.get_link = ethtool_op_get_link, |
|
.get_link_ksettings = phy_ethtool_get_link_ksettings, |
|
.set_link_ksettings = phy_ethtool_set_link_ksettings, |
|
}; |
|
|
|
#define FIRST_OR_LAST_MASK (FIRST_MASK | LAST_MASK) |
|
|
|
/** |
|
* arc_emac_tx_clean - clears processed by EMAC Tx BDs. |
|
* @ndev: Pointer to the network device. |
|
*/ |
|
static void arc_emac_tx_clean(struct net_device *ndev) |
|
{ |
|
struct arc_emac_priv *priv = netdev_priv(ndev); |
|
struct net_device_stats *stats = &ndev->stats; |
|
unsigned int i; |
|
|
|
for (i = 0; i < TX_BD_NUM; i++) { |
|
unsigned int *txbd_dirty = &priv->txbd_dirty; |
|
struct arc_emac_bd *txbd = &priv->txbd[*txbd_dirty]; |
|
struct buffer_state *tx_buff = &priv->tx_buff[*txbd_dirty]; |
|
struct sk_buff *skb = tx_buff->skb; |
|
unsigned int info = le32_to_cpu(txbd->info); |
|
|
|
if ((info & FOR_EMAC) || !txbd->data || !skb) |
|
break; |
|
|
|
if (unlikely(info & (DROP | DEFR | LTCL | UFLO))) { |
|
stats->tx_errors++; |
|
stats->tx_dropped++; |
|
|
|
if (info & DEFR) |
|
stats->tx_carrier_errors++; |
|
|
|
if (info & LTCL) |
|
stats->collisions++; |
|
|
|
if (info & UFLO) |
|
stats->tx_fifo_errors++; |
|
} else if (likely(info & FIRST_OR_LAST_MASK)) { |
|
stats->tx_packets++; |
|
stats->tx_bytes += skb->len; |
|
} |
|
|
|
dma_unmap_single(&ndev->dev, dma_unmap_addr(tx_buff, addr), |
|
dma_unmap_len(tx_buff, len), DMA_TO_DEVICE); |
|
|
|
/* return the sk_buff to system */ |
|
dev_consume_skb_irq(skb); |
|
|
|
txbd->data = 0; |
|
txbd->info = 0; |
|
tx_buff->skb = NULL; |
|
|
|
*txbd_dirty = (*txbd_dirty + 1) % TX_BD_NUM; |
|
} |
|
|
|
/* Ensure that txbd_dirty is visible to tx() before checking |
|
* for queue stopped. |
|
*/ |
|
smp_mb(); |
|
|
|
if (netif_queue_stopped(ndev) && arc_emac_tx_avail(priv)) |
|
netif_wake_queue(ndev); |
|
} |
|
|
|
/** |
|
* arc_emac_rx - processing of Rx packets. |
|
* @ndev: Pointer to the network device. |
|
* @budget: How many BDs to process on 1 call. |
|
* |
|
* returns: Number of processed BDs |
|
* |
|
* Iterate through Rx BDs and deliver received packages to upper layer. |
|
*/ |
|
static int arc_emac_rx(struct net_device *ndev, int budget) |
|
{ |
|
struct arc_emac_priv *priv = netdev_priv(ndev); |
|
unsigned int work_done; |
|
|
|
for (work_done = 0; work_done < budget; work_done++) { |
|
unsigned int *last_rx_bd = &priv->last_rx_bd; |
|
struct net_device_stats *stats = &ndev->stats; |
|
struct buffer_state *rx_buff = &priv->rx_buff[*last_rx_bd]; |
|
struct arc_emac_bd *rxbd = &priv->rxbd[*last_rx_bd]; |
|
unsigned int pktlen, info = le32_to_cpu(rxbd->info); |
|
struct sk_buff *skb; |
|
dma_addr_t addr; |
|
|
|
if (unlikely((info & OWN_MASK) == FOR_EMAC)) |
|
break; |
|
|
|
/* Make a note that we saw a packet at this BD. |
|
* So next time, driver starts from this + 1 |
|
*/ |
|
*last_rx_bd = (*last_rx_bd + 1) % RX_BD_NUM; |
|
|
|
if (unlikely((info & FIRST_OR_LAST_MASK) != |
|
FIRST_OR_LAST_MASK)) { |
|
/* We pre-allocate buffers of MTU size so incoming |
|
* packets won't be split/chained. |
|
*/ |
|
if (net_ratelimit()) |
|
netdev_err(ndev, "incomplete packet received\n"); |
|
|
|
/* Return ownership to EMAC */ |
|
rxbd->info = cpu_to_le32(FOR_EMAC | EMAC_BUFFER_SIZE); |
|
stats->rx_errors++; |
|
stats->rx_length_errors++; |
|
continue; |
|
} |
|
|
|
/* Prepare the BD for next cycle. netif_receive_skb() |
|
* only if new skb was allocated and mapped to avoid holes |
|
* in the RX fifo. |
|
*/ |
|
skb = netdev_alloc_skb_ip_align(ndev, EMAC_BUFFER_SIZE); |
|
if (unlikely(!skb)) { |
|
if (net_ratelimit()) |
|
netdev_err(ndev, "cannot allocate skb\n"); |
|
/* Return ownership to EMAC */ |
|
rxbd->info = cpu_to_le32(FOR_EMAC | EMAC_BUFFER_SIZE); |
|
stats->rx_errors++; |
|
stats->rx_dropped++; |
|
continue; |
|
} |
|
|
|
addr = dma_map_single(&ndev->dev, (void *)skb->data, |
|
EMAC_BUFFER_SIZE, DMA_FROM_DEVICE); |
|
if (dma_mapping_error(&ndev->dev, addr)) { |
|
if (net_ratelimit()) |
|
netdev_err(ndev, "cannot map dma buffer\n"); |
|
dev_kfree_skb(skb); |
|
/* Return ownership to EMAC */ |
|
rxbd->info = cpu_to_le32(FOR_EMAC | EMAC_BUFFER_SIZE); |
|
stats->rx_errors++; |
|
stats->rx_dropped++; |
|
continue; |
|
} |
|
|
|
/* unmap previosly mapped skb */ |
|
dma_unmap_single(&ndev->dev, dma_unmap_addr(rx_buff, addr), |
|
dma_unmap_len(rx_buff, len), DMA_FROM_DEVICE); |
|
|
|
pktlen = info & LEN_MASK; |
|
stats->rx_packets++; |
|
stats->rx_bytes += pktlen; |
|
skb_put(rx_buff->skb, pktlen); |
|
rx_buff->skb->dev = ndev; |
|
rx_buff->skb->protocol = eth_type_trans(rx_buff->skb, ndev); |
|
|
|
netif_receive_skb(rx_buff->skb); |
|
|
|
rx_buff->skb = skb; |
|
dma_unmap_addr_set(rx_buff, addr, addr); |
|
dma_unmap_len_set(rx_buff, len, EMAC_BUFFER_SIZE); |
|
|
|
rxbd->data = cpu_to_le32(addr); |
|
|
|
/* Make sure pointer to data buffer is set */ |
|
wmb(); |
|
|
|
/* Return ownership to EMAC */ |
|
rxbd->info = cpu_to_le32(FOR_EMAC | EMAC_BUFFER_SIZE); |
|
} |
|
|
|
return work_done; |
|
} |
|
|
|
/** |
|
* arc_emac_rx_miss_handle - handle R_MISS register |
|
* @ndev: Pointer to the net_device structure. |
|
*/ |
|
static void arc_emac_rx_miss_handle(struct net_device *ndev) |
|
{ |
|
struct arc_emac_priv *priv = netdev_priv(ndev); |
|
struct net_device_stats *stats = &ndev->stats; |
|
unsigned int miss; |
|
|
|
miss = arc_reg_get(priv, R_MISS); |
|
if (miss) { |
|
stats->rx_errors += miss; |
|
stats->rx_missed_errors += miss; |
|
priv->rx_missed_errors += miss; |
|
} |
|
} |
|
|
|
/** |
|
* arc_emac_rx_stall_check - check RX stall |
|
* @ndev: Pointer to the net_device structure. |
|
* @budget: How many BDs requested to process on 1 call. |
|
* @work_done: How many BDs processed |
|
* |
|
* Under certain conditions EMAC stop reception of incoming packets and |
|
* continuously increment R_MISS register instead of saving data into |
|
* provided buffer. This function detect that condition and restart |
|
* EMAC. |
|
*/ |
|
static void arc_emac_rx_stall_check(struct net_device *ndev, |
|
int budget, unsigned int work_done) |
|
{ |
|
struct arc_emac_priv *priv = netdev_priv(ndev); |
|
struct arc_emac_bd *rxbd; |
|
|
|
if (work_done) |
|
priv->rx_missed_errors = 0; |
|
|
|
if (priv->rx_missed_errors && budget) { |
|
rxbd = &priv->rxbd[priv->last_rx_bd]; |
|
if (le32_to_cpu(rxbd->info) & FOR_EMAC) { |
|
arc_emac_restart(ndev); |
|
priv->rx_missed_errors = 0; |
|
} |
|
} |
|
} |
|
|
|
/** |
|
* arc_emac_poll - NAPI poll handler. |
|
* @napi: Pointer to napi_struct structure. |
|
* @budget: How many BDs to process on 1 call. |
|
* |
|
* returns: Number of processed BDs |
|
*/ |
|
static int arc_emac_poll(struct napi_struct *napi, int budget) |
|
{ |
|
struct net_device *ndev = napi->dev; |
|
struct arc_emac_priv *priv = netdev_priv(ndev); |
|
unsigned int work_done; |
|
|
|
arc_emac_tx_clean(ndev); |
|
arc_emac_rx_miss_handle(ndev); |
|
|
|
work_done = arc_emac_rx(ndev, budget); |
|
if (work_done < budget) { |
|
napi_complete_done(napi, work_done); |
|
arc_reg_or(priv, R_ENABLE, RXINT_MASK | TXINT_MASK); |
|
} |
|
|
|
arc_emac_rx_stall_check(ndev, budget, work_done); |
|
|
|
return work_done; |
|
} |
|
|
|
/** |
|
* arc_emac_intr - Global interrupt handler for EMAC. |
|
* @irq: irq number. |
|
* @dev_instance: device instance. |
|
* |
|
* returns: IRQ_HANDLED for all cases. |
|
* |
|
* ARC EMAC has only 1 interrupt line, and depending on bits raised in |
|
* STATUS register we may tell what is a reason for interrupt to fire. |
|
*/ |
|
static irqreturn_t arc_emac_intr(int irq, void *dev_instance) |
|
{ |
|
struct net_device *ndev = dev_instance; |
|
struct arc_emac_priv *priv = netdev_priv(ndev); |
|
struct net_device_stats *stats = &ndev->stats; |
|
unsigned int status; |
|
|
|
status = arc_reg_get(priv, R_STATUS); |
|
status &= ~MDIO_MASK; |
|
|
|
/* Reset all flags except "MDIO complete" */ |
|
arc_reg_set(priv, R_STATUS, status); |
|
|
|
if (status & (RXINT_MASK | TXINT_MASK)) { |
|
if (likely(napi_schedule_prep(&priv->napi))) { |
|
arc_reg_clr(priv, R_ENABLE, RXINT_MASK | TXINT_MASK); |
|
__napi_schedule(&priv->napi); |
|
} |
|
} |
|
|
|
if (status & ERR_MASK) { |
|
/* MSER/RXCR/RXFR/RXFL interrupt fires on corresponding |
|
* 8-bit error counter overrun. |
|
*/ |
|
|
|
if (status & MSER_MASK) { |
|
stats->rx_missed_errors += 0x100; |
|
stats->rx_errors += 0x100; |
|
priv->rx_missed_errors += 0x100; |
|
napi_schedule(&priv->napi); |
|
} |
|
|
|
if (status & RXCR_MASK) { |
|
stats->rx_crc_errors += 0x100; |
|
stats->rx_errors += 0x100; |
|
} |
|
|
|
if (status & RXFR_MASK) { |
|
stats->rx_frame_errors += 0x100; |
|
stats->rx_errors += 0x100; |
|
} |
|
|
|
if (status & RXFL_MASK) { |
|
stats->rx_over_errors += 0x100; |
|
stats->rx_errors += 0x100; |
|
} |
|
} |
|
|
|
return IRQ_HANDLED; |
|
} |
|
|
|
#ifdef CONFIG_NET_POLL_CONTROLLER |
|
static void arc_emac_poll_controller(struct net_device *dev) |
|
{ |
|
disable_irq(dev->irq); |
|
arc_emac_intr(dev->irq, dev); |
|
enable_irq(dev->irq); |
|
} |
|
#endif |
|
|
|
/** |
|
* arc_emac_open - Open the network device. |
|
* @ndev: Pointer to the network device. |
|
* |
|
* returns: 0, on success or non-zero error value on failure. |
|
* |
|
* This function sets the MAC address, requests and enables an IRQ |
|
* for the EMAC device and starts the Tx queue. |
|
* It also connects to the phy device. |
|
*/ |
|
static int arc_emac_open(struct net_device *ndev) |
|
{ |
|
struct arc_emac_priv *priv = netdev_priv(ndev); |
|
struct phy_device *phy_dev = ndev->phydev; |
|
int i; |
|
|
|
phy_dev->autoneg = AUTONEG_ENABLE; |
|
phy_dev->speed = 0; |
|
phy_dev->duplex = 0; |
|
linkmode_and(phy_dev->advertising, phy_dev->advertising, |
|
phy_dev->supported); |
|
|
|
priv->last_rx_bd = 0; |
|
|
|
/* Allocate and set buffers for Rx BD's */ |
|
for (i = 0; i < RX_BD_NUM; i++) { |
|
dma_addr_t addr; |
|
unsigned int *last_rx_bd = &priv->last_rx_bd; |
|
struct arc_emac_bd *rxbd = &priv->rxbd[*last_rx_bd]; |
|
struct buffer_state *rx_buff = &priv->rx_buff[*last_rx_bd]; |
|
|
|
rx_buff->skb = netdev_alloc_skb_ip_align(ndev, |
|
EMAC_BUFFER_SIZE); |
|
if (unlikely(!rx_buff->skb)) |
|
return -ENOMEM; |
|
|
|
addr = dma_map_single(&ndev->dev, (void *)rx_buff->skb->data, |
|
EMAC_BUFFER_SIZE, DMA_FROM_DEVICE); |
|
if (dma_mapping_error(&ndev->dev, addr)) { |
|
netdev_err(ndev, "cannot dma map\n"); |
|
dev_kfree_skb(rx_buff->skb); |
|
return -ENOMEM; |
|
} |
|
dma_unmap_addr_set(rx_buff, addr, addr); |
|
dma_unmap_len_set(rx_buff, len, EMAC_BUFFER_SIZE); |
|
|
|
rxbd->data = cpu_to_le32(addr); |
|
|
|
/* Make sure pointer to data buffer is set */ |
|
wmb(); |
|
|
|
/* Return ownership to EMAC */ |
|
rxbd->info = cpu_to_le32(FOR_EMAC | EMAC_BUFFER_SIZE); |
|
|
|
*last_rx_bd = (*last_rx_bd + 1) % RX_BD_NUM; |
|
} |
|
|
|
priv->txbd_curr = 0; |
|
priv->txbd_dirty = 0; |
|
|
|
/* Clean Tx BD's */ |
|
memset(priv->txbd, 0, TX_RING_SZ); |
|
|
|
/* Initialize logical address filter */ |
|
arc_reg_set(priv, R_LAFL, 0); |
|
arc_reg_set(priv, R_LAFH, 0); |
|
|
|
/* Set BD ring pointers for device side */ |
|
arc_reg_set(priv, R_RX_RING, (unsigned int)priv->rxbd_dma); |
|
arc_reg_set(priv, R_TX_RING, (unsigned int)priv->txbd_dma); |
|
|
|
/* Enable interrupts */ |
|
arc_reg_set(priv, R_ENABLE, RXINT_MASK | TXINT_MASK | ERR_MASK); |
|
|
|
/* Set CONTROL */ |
|
arc_reg_set(priv, R_CTRL, |
|
(RX_BD_NUM << 24) | /* RX BD table length */ |
|
(TX_BD_NUM << 16) | /* TX BD table length */ |
|
TXRN_MASK | RXRN_MASK); |
|
|
|
napi_enable(&priv->napi); |
|
|
|
/* Enable EMAC */ |
|
arc_reg_or(priv, R_CTRL, EN_MASK); |
|
|
|
phy_start(ndev->phydev); |
|
|
|
netif_start_queue(ndev); |
|
|
|
return 0; |
|
} |
|
|
|
/** |
|
* arc_emac_set_rx_mode - Change the receive filtering mode. |
|
* @ndev: Pointer to the network device. |
|
* |
|
* This function enables/disables promiscuous or all-multicast mode |
|
* and updates the multicast filtering list of the network device. |
|
*/ |
|
static void arc_emac_set_rx_mode(struct net_device *ndev) |
|
{ |
|
struct arc_emac_priv *priv = netdev_priv(ndev); |
|
|
|
if (ndev->flags & IFF_PROMISC) { |
|
arc_reg_or(priv, R_CTRL, PROM_MASK); |
|
} else { |
|
arc_reg_clr(priv, R_CTRL, PROM_MASK); |
|
|
|
if (ndev->flags & IFF_ALLMULTI) { |
|
arc_reg_set(priv, R_LAFL, ~0); |
|
arc_reg_set(priv, R_LAFH, ~0); |
|
} else if (ndev->flags & IFF_MULTICAST) { |
|
struct netdev_hw_addr *ha; |
|
unsigned int filter[2] = { 0, 0 }; |
|
int bit; |
|
|
|
netdev_for_each_mc_addr(ha, ndev) { |
|
bit = ether_crc_le(ETH_ALEN, ha->addr) >> 26; |
|
filter[bit >> 5] |= 1 << (bit & 31); |
|
} |
|
|
|
arc_reg_set(priv, R_LAFL, filter[0]); |
|
arc_reg_set(priv, R_LAFH, filter[1]); |
|
} else { |
|
arc_reg_set(priv, R_LAFL, 0); |
|
arc_reg_set(priv, R_LAFH, 0); |
|
} |
|
} |
|
} |
|
|
|
/** |
|
* arc_free_tx_queue - free skb from tx queue |
|
* @ndev: Pointer to the network device. |
|
* |
|
* This function must be called while EMAC disable |
|
*/ |
|
static void arc_free_tx_queue(struct net_device *ndev) |
|
{ |
|
struct arc_emac_priv *priv = netdev_priv(ndev); |
|
unsigned int i; |
|
|
|
for (i = 0; i < TX_BD_NUM; i++) { |
|
struct arc_emac_bd *txbd = &priv->txbd[i]; |
|
struct buffer_state *tx_buff = &priv->tx_buff[i]; |
|
|
|
if (tx_buff->skb) { |
|
dma_unmap_single(&ndev->dev, |
|
dma_unmap_addr(tx_buff, addr), |
|
dma_unmap_len(tx_buff, len), |
|
DMA_TO_DEVICE); |
|
|
|
/* return the sk_buff to system */ |
|
dev_kfree_skb_irq(tx_buff->skb); |
|
} |
|
|
|
txbd->info = 0; |
|
txbd->data = 0; |
|
tx_buff->skb = NULL; |
|
} |
|
} |
|
|
|
/** |
|
* arc_free_rx_queue - free skb from rx queue |
|
* @ndev: Pointer to the network device. |
|
* |
|
* This function must be called while EMAC disable |
|
*/ |
|
static void arc_free_rx_queue(struct net_device *ndev) |
|
{ |
|
struct arc_emac_priv *priv = netdev_priv(ndev); |
|
unsigned int i; |
|
|
|
for (i = 0; i < RX_BD_NUM; i++) { |
|
struct arc_emac_bd *rxbd = &priv->rxbd[i]; |
|
struct buffer_state *rx_buff = &priv->rx_buff[i]; |
|
|
|
if (rx_buff->skb) { |
|
dma_unmap_single(&ndev->dev, |
|
dma_unmap_addr(rx_buff, addr), |
|
dma_unmap_len(rx_buff, len), |
|
DMA_FROM_DEVICE); |
|
|
|
/* return the sk_buff to system */ |
|
dev_kfree_skb_irq(rx_buff->skb); |
|
} |
|
|
|
rxbd->info = 0; |
|
rxbd->data = 0; |
|
rx_buff->skb = NULL; |
|
} |
|
} |
|
|
|
/** |
|
* arc_emac_stop - Close the network device. |
|
* @ndev: Pointer to the network device. |
|
* |
|
* This function stops the Tx queue, disables interrupts and frees the IRQ for |
|
* the EMAC device. |
|
* It also disconnects the PHY device associated with the EMAC device. |
|
*/ |
|
static int arc_emac_stop(struct net_device *ndev) |
|
{ |
|
struct arc_emac_priv *priv = netdev_priv(ndev); |
|
|
|
napi_disable(&priv->napi); |
|
netif_stop_queue(ndev); |
|
|
|
phy_stop(ndev->phydev); |
|
|
|
/* Disable interrupts */ |
|
arc_reg_clr(priv, R_ENABLE, RXINT_MASK | TXINT_MASK | ERR_MASK); |
|
|
|
/* Disable EMAC */ |
|
arc_reg_clr(priv, R_CTRL, EN_MASK); |
|
|
|
/* Return the sk_buff to system */ |
|
arc_free_tx_queue(ndev); |
|
arc_free_rx_queue(ndev); |
|
|
|
return 0; |
|
} |
|
|
|
/** |
|
* arc_emac_stats - Get system network statistics. |
|
* @ndev: Pointer to net_device structure. |
|
* |
|
* Returns the address of the device statistics structure. |
|
* Statistics are updated in interrupt handler. |
|
*/ |
|
static struct net_device_stats *arc_emac_stats(struct net_device *ndev) |
|
{ |
|
struct arc_emac_priv *priv = netdev_priv(ndev); |
|
struct net_device_stats *stats = &ndev->stats; |
|
unsigned long miss, rxerr; |
|
u8 rxcrc, rxfram, rxoflow; |
|
|
|
rxerr = arc_reg_get(priv, R_RXERR); |
|
miss = arc_reg_get(priv, R_MISS); |
|
|
|
rxcrc = rxerr; |
|
rxfram = rxerr >> 8; |
|
rxoflow = rxerr >> 16; |
|
|
|
stats->rx_errors += miss; |
|
stats->rx_errors += rxcrc + rxfram + rxoflow; |
|
|
|
stats->rx_over_errors += rxoflow; |
|
stats->rx_frame_errors += rxfram; |
|
stats->rx_crc_errors += rxcrc; |
|
stats->rx_missed_errors += miss; |
|
|
|
return stats; |
|
} |
|
|
|
/** |
|
* arc_emac_tx - Starts the data transmission. |
|
* @skb: sk_buff pointer that contains data to be Transmitted. |
|
* @ndev: Pointer to net_device structure. |
|
* |
|
* returns: NETDEV_TX_OK, on success |
|
* NETDEV_TX_BUSY, if any of the descriptors are not free. |
|
* |
|
* This function is invoked from upper layers to initiate transmission. |
|
*/ |
|
static netdev_tx_t arc_emac_tx(struct sk_buff *skb, struct net_device *ndev) |
|
{ |
|
struct arc_emac_priv *priv = netdev_priv(ndev); |
|
unsigned int len, *txbd_curr = &priv->txbd_curr; |
|
struct net_device_stats *stats = &ndev->stats; |
|
__le32 *info = &priv->txbd[*txbd_curr].info; |
|
dma_addr_t addr; |
|
|
|
if (skb_padto(skb, ETH_ZLEN)) |
|
return NETDEV_TX_OK; |
|
|
|
len = max_t(unsigned int, ETH_ZLEN, skb->len); |
|
|
|
if (unlikely(!arc_emac_tx_avail(priv))) { |
|
netif_stop_queue(ndev); |
|
netdev_err(ndev, "BUG! Tx Ring full when queue awake!\n"); |
|
return NETDEV_TX_BUSY; |
|
} |
|
|
|
addr = dma_map_single(&ndev->dev, (void *)skb->data, len, |
|
DMA_TO_DEVICE); |
|
|
|
if (unlikely(dma_mapping_error(&ndev->dev, addr))) { |
|
stats->tx_dropped++; |
|
stats->tx_errors++; |
|
dev_kfree_skb_any(skb); |
|
return NETDEV_TX_OK; |
|
} |
|
dma_unmap_addr_set(&priv->tx_buff[*txbd_curr], addr, addr); |
|
dma_unmap_len_set(&priv->tx_buff[*txbd_curr], len, len); |
|
|
|
priv->txbd[*txbd_curr].data = cpu_to_le32(addr); |
|
|
|
/* Make sure pointer to data buffer is set */ |
|
wmb(); |
|
|
|
skb_tx_timestamp(skb); |
|
|
|
*info = cpu_to_le32(FOR_EMAC | FIRST_OR_LAST_MASK | len); |
|
|
|
/* Make sure info word is set */ |
|
wmb(); |
|
|
|
priv->tx_buff[*txbd_curr].skb = skb; |
|
|
|
/* Increment index to point to the next BD */ |
|
*txbd_curr = (*txbd_curr + 1) % TX_BD_NUM; |
|
|
|
/* Ensure that tx_clean() sees the new txbd_curr before |
|
* checking the queue status. This prevents an unneeded wake |
|
* of the queue in tx_clean(). |
|
*/ |
|
smp_mb(); |
|
|
|
if (!arc_emac_tx_avail(priv)) { |
|
netif_stop_queue(ndev); |
|
/* Refresh tx_dirty */ |
|
smp_mb(); |
|
if (arc_emac_tx_avail(priv)) |
|
netif_start_queue(ndev); |
|
} |
|
|
|
arc_reg_set(priv, R_STATUS, TXPL_MASK); |
|
|
|
return NETDEV_TX_OK; |
|
} |
|
|
|
static void arc_emac_set_address_internal(struct net_device *ndev) |
|
{ |
|
struct arc_emac_priv *priv = netdev_priv(ndev); |
|
unsigned int addr_low, addr_hi; |
|
|
|
addr_low = le32_to_cpu(*(__le32 *)&ndev->dev_addr[0]); |
|
addr_hi = le16_to_cpu(*(__le16 *)&ndev->dev_addr[4]); |
|
|
|
arc_reg_set(priv, R_ADDRL, addr_low); |
|
arc_reg_set(priv, R_ADDRH, addr_hi); |
|
} |
|
|
|
/** |
|
* arc_emac_set_address - Set the MAC address for this device. |
|
* @ndev: Pointer to net_device structure. |
|
* @p: 6 byte Address to be written as MAC address. |
|
* |
|
* This function copies the HW address from the sockaddr structure to the |
|
* net_device structure and updates the address in HW. |
|
* |
|
* returns: -EBUSY if the net device is busy or 0 if the address is set |
|
* successfully. |
|
*/ |
|
static int arc_emac_set_address(struct net_device *ndev, void *p) |
|
{ |
|
struct sockaddr *addr = p; |
|
|
|
if (netif_running(ndev)) |
|
return -EBUSY; |
|
|
|
if (!is_valid_ether_addr(addr->sa_data)) |
|
return -EADDRNOTAVAIL; |
|
|
|
memcpy(ndev->dev_addr, addr->sa_data, ndev->addr_len); |
|
|
|
arc_emac_set_address_internal(ndev); |
|
|
|
return 0; |
|
} |
|
|
|
/** |
|
* arc_emac_restart - Restart EMAC |
|
* @ndev: Pointer to net_device structure. |
|
* |
|
* This function do hardware reset of EMAC in order to restore |
|
* network packets reception. |
|
*/ |
|
static void arc_emac_restart(struct net_device *ndev) |
|
{ |
|
struct arc_emac_priv *priv = netdev_priv(ndev); |
|
struct net_device_stats *stats = &ndev->stats; |
|
int i; |
|
|
|
if (net_ratelimit()) |
|
netdev_warn(ndev, "restarting stalled EMAC\n"); |
|
|
|
netif_stop_queue(ndev); |
|
|
|
/* Disable interrupts */ |
|
arc_reg_clr(priv, R_ENABLE, RXINT_MASK | TXINT_MASK | ERR_MASK); |
|
|
|
/* Disable EMAC */ |
|
arc_reg_clr(priv, R_CTRL, EN_MASK); |
|
|
|
/* Return the sk_buff to system */ |
|
arc_free_tx_queue(ndev); |
|
|
|
/* Clean Tx BD's */ |
|
priv->txbd_curr = 0; |
|
priv->txbd_dirty = 0; |
|
memset(priv->txbd, 0, TX_RING_SZ); |
|
|
|
for (i = 0; i < RX_BD_NUM; i++) { |
|
struct arc_emac_bd *rxbd = &priv->rxbd[i]; |
|
unsigned int info = le32_to_cpu(rxbd->info); |
|
|
|
if (!(info & FOR_EMAC)) { |
|
stats->rx_errors++; |
|
stats->rx_dropped++; |
|
} |
|
/* Return ownership to EMAC */ |
|
rxbd->info = cpu_to_le32(FOR_EMAC | EMAC_BUFFER_SIZE); |
|
} |
|
priv->last_rx_bd = 0; |
|
|
|
/* Make sure info is visible to EMAC before enable */ |
|
wmb(); |
|
|
|
/* Enable interrupts */ |
|
arc_reg_set(priv, R_ENABLE, RXINT_MASK | TXINT_MASK | ERR_MASK); |
|
|
|
/* Enable EMAC */ |
|
arc_reg_or(priv, R_CTRL, EN_MASK); |
|
|
|
netif_start_queue(ndev); |
|
} |
|
|
|
static const struct net_device_ops arc_emac_netdev_ops = { |
|
.ndo_open = arc_emac_open, |
|
.ndo_stop = arc_emac_stop, |
|
.ndo_start_xmit = arc_emac_tx, |
|
.ndo_set_mac_address = arc_emac_set_address, |
|
.ndo_get_stats = arc_emac_stats, |
|
.ndo_set_rx_mode = arc_emac_set_rx_mode, |
|
.ndo_eth_ioctl = phy_do_ioctl_running, |
|
#ifdef CONFIG_NET_POLL_CONTROLLER |
|
.ndo_poll_controller = arc_emac_poll_controller, |
|
#endif |
|
}; |
|
|
|
int arc_emac_probe(struct net_device *ndev, int interface) |
|
{ |
|
struct device *dev = ndev->dev.parent; |
|
struct resource res_regs; |
|
struct device_node *phy_node; |
|
struct phy_device *phydev = NULL; |
|
struct arc_emac_priv *priv; |
|
unsigned int id, clock_frequency, irq; |
|
int err; |
|
|
|
/* Get PHY from device tree */ |
|
phy_node = of_parse_phandle(dev->of_node, "phy", 0); |
|
if (!phy_node) { |
|
dev_err(dev, "failed to retrieve phy description from device tree\n"); |
|
return -ENODEV; |
|
} |
|
|
|
/* Get EMAC registers base address from device tree */ |
|
err = of_address_to_resource(dev->of_node, 0, &res_regs); |
|
if (err) { |
|
dev_err(dev, "failed to retrieve registers base from device tree\n"); |
|
err = -ENODEV; |
|
goto out_put_node; |
|
} |
|
|
|
/* Get IRQ from device tree */ |
|
irq = irq_of_parse_and_map(dev->of_node, 0); |
|
if (!irq) { |
|
dev_err(dev, "failed to retrieve <irq> value from device tree\n"); |
|
err = -ENODEV; |
|
goto out_put_node; |
|
} |
|
|
|
ndev->netdev_ops = &arc_emac_netdev_ops; |
|
ndev->ethtool_ops = &arc_emac_ethtool_ops; |
|
ndev->watchdog_timeo = TX_TIMEOUT; |
|
|
|
priv = netdev_priv(ndev); |
|
priv->dev = dev; |
|
|
|
priv->regs = devm_ioremap_resource(dev, &res_regs); |
|
if (IS_ERR(priv->regs)) { |
|
err = PTR_ERR(priv->regs); |
|
goto out_put_node; |
|
} |
|
|
|
dev_dbg(dev, "Registers base address is 0x%p\n", priv->regs); |
|
|
|
if (priv->clk) { |
|
err = clk_prepare_enable(priv->clk); |
|
if (err) { |
|
dev_err(dev, "failed to enable clock\n"); |
|
goto out_put_node; |
|
} |
|
|
|
clock_frequency = clk_get_rate(priv->clk); |
|
} else { |
|
/* Get CPU clock frequency from device tree */ |
|
if (of_property_read_u32(dev->of_node, "clock-frequency", |
|
&clock_frequency)) { |
|
dev_err(dev, "failed to retrieve <clock-frequency> from device tree\n"); |
|
err = -EINVAL; |
|
goto out_put_node; |
|
} |
|
} |
|
|
|
id = arc_reg_get(priv, R_ID); |
|
|
|
/* Check for EMAC revision 5 or 7, magic number */ |
|
if (!(id == 0x0005fd02 || id == 0x0007fd02)) { |
|
dev_err(dev, "ARC EMAC not detected, id=0x%x\n", id); |
|
err = -ENODEV; |
|
goto out_clken; |
|
} |
|
dev_info(dev, "ARC EMAC detected with id: 0x%x\n", id); |
|
|
|
/* Set poll rate so that it polls every 1 ms */ |
|
arc_reg_set(priv, R_POLLRATE, clock_frequency / 1000000); |
|
|
|
ndev->irq = irq; |
|
dev_info(dev, "IRQ is %d\n", ndev->irq); |
|
|
|
/* Register interrupt handler for device */ |
|
err = devm_request_irq(dev, ndev->irq, arc_emac_intr, 0, |
|
ndev->name, ndev); |
|
if (err) { |
|
dev_err(dev, "could not allocate IRQ\n"); |
|
goto out_clken; |
|
} |
|
|
|
/* Get MAC address from device tree */ |
|
err = of_get_mac_address(dev->of_node, ndev->dev_addr); |
|
if (err) |
|
eth_hw_addr_random(ndev); |
|
|
|
arc_emac_set_address_internal(ndev); |
|
dev_info(dev, "MAC address is now %pM\n", ndev->dev_addr); |
|
|
|
/* Do 1 allocation instead of 2 separate ones for Rx and Tx BD rings */ |
|
priv->rxbd = dmam_alloc_coherent(dev, RX_RING_SZ + TX_RING_SZ, |
|
&priv->rxbd_dma, GFP_KERNEL); |
|
|
|
if (!priv->rxbd) { |
|
dev_err(dev, "failed to allocate data buffers\n"); |
|
err = -ENOMEM; |
|
goto out_clken; |
|
} |
|
|
|
priv->txbd = priv->rxbd + RX_BD_NUM; |
|
|
|
priv->txbd_dma = priv->rxbd_dma + RX_RING_SZ; |
|
dev_dbg(dev, "EMAC Device addr: Rx Ring [0x%x], Tx Ring[%x]\n", |
|
(unsigned int)priv->rxbd_dma, (unsigned int)priv->txbd_dma); |
|
|
|
err = arc_mdio_probe(priv); |
|
if (err) { |
|
dev_err(dev, "failed to probe MII bus\n"); |
|
goto out_clken; |
|
} |
|
|
|
phydev = of_phy_connect(ndev, phy_node, arc_emac_adjust_link, 0, |
|
interface); |
|
if (!phydev) { |
|
dev_err(dev, "of_phy_connect() failed\n"); |
|
err = -ENODEV; |
|
goto out_mdio; |
|
} |
|
|
|
dev_info(dev, "connected to %s phy with id 0x%x\n", |
|
phydev->drv->name, phydev->phy_id); |
|
|
|
netif_napi_add(ndev, &priv->napi, arc_emac_poll, ARC_EMAC_NAPI_WEIGHT); |
|
|
|
err = register_netdev(ndev); |
|
if (err) { |
|
dev_err(dev, "failed to register network device\n"); |
|
goto out_netif_api; |
|
} |
|
|
|
of_node_put(phy_node); |
|
return 0; |
|
|
|
out_netif_api: |
|
netif_napi_del(&priv->napi); |
|
phy_disconnect(phydev); |
|
out_mdio: |
|
arc_mdio_remove(priv); |
|
out_clken: |
|
if (priv->clk) |
|
clk_disable_unprepare(priv->clk); |
|
out_put_node: |
|
of_node_put(phy_node); |
|
|
|
return err; |
|
} |
|
EXPORT_SYMBOL_GPL(arc_emac_probe); |
|
|
|
int arc_emac_remove(struct net_device *ndev) |
|
{ |
|
struct arc_emac_priv *priv = netdev_priv(ndev); |
|
|
|
phy_disconnect(ndev->phydev); |
|
arc_mdio_remove(priv); |
|
unregister_netdev(ndev); |
|
netif_napi_del(&priv->napi); |
|
|
|
if (!IS_ERR(priv->clk)) |
|
clk_disable_unprepare(priv->clk); |
|
|
|
return 0; |
|
} |
|
EXPORT_SYMBOL_GPL(arc_emac_remove); |
|
|
|
MODULE_AUTHOR("Alexey Brodkin <[email protected]>"); |
|
MODULE_DESCRIPTION("ARC EMAC driver"); |
|
MODULE_LICENSE("GPL");
|
|
|