mirror of https://github.com/Qortal/Brooklyn
You can not select more than 25 topics
Topics must start with a letter or number, can include dashes ('-') and can be up to 35 characters long.
67 lines
2.5 KiB
67 lines
2.5 KiB
/* SPDX-License-Identifier: GPL-2.0-or-later */ |
|
/* |
|
* max8973-regulator.h -- MAXIM 8973 regulator |
|
* |
|
* Interface for regulator driver for MAXIM 8973 DC-DC step-down |
|
* switching regulator. |
|
* |
|
* Copyright (C) 2012 NVIDIA Corporation |
|
|
|
* Author: Laxman Dewangan <[email protected]> |
|
*/ |
|
|
|
#ifndef __LINUX_REGULATOR_MAX8973_H |
|
#define __LINUX_REGULATOR_MAX8973_H |
|
|
|
/* |
|
* Control flags for configuration of the device. |
|
* Client need to pass this information with ORed |
|
*/ |
|
#define MAX8973_CONTROL_REMOTE_SENSE_ENABLE 0x00000001 |
|
#define MAX8973_CONTROL_FALLING_SLEW_RATE_ENABLE 0x00000002 |
|
#define MAX8973_CONTROL_OUTPUT_ACTIVE_DISCH_ENABLE 0x00000004 |
|
#define MAX8973_CONTROL_BIAS_ENABLE 0x00000008 |
|
#define MAX8973_CONTROL_PULL_DOWN_ENABLE 0x00000010 |
|
#define MAX8973_CONTROL_FREQ_SHIFT_9PER_ENABLE 0x00000020 |
|
|
|
#define MAX8973_CONTROL_CLKADV_TRIP_DISABLED 0x00000000 |
|
#define MAX8973_CONTROL_CLKADV_TRIP_75mV_PER_US 0x00010000 |
|
#define MAX8973_CONTROL_CLKADV_TRIP_150mV_PER_US 0x00020000 |
|
#define MAX8973_CONTROL_CLKADV_TRIP_75mV_PER_US_HIST_DIS 0x00030000 |
|
|
|
#define MAX8973_CONTROL_INDUCTOR_VALUE_NOMINAL 0x00000000 |
|
#define MAX8973_CONTROL_INDUCTOR_VALUE_MINUS_30_PER 0x00100000 |
|
#define MAX8973_CONTROL_INDUCTOR_VALUE_PLUS_30_PER 0x00200000 |
|
#define MAX8973_CONTROL_INDUCTOR_VALUE_PLUS_60_PER 0x00300000 |
|
|
|
/* |
|
* struct max8973_regulator_platform_data - max8973 regulator platform data. |
|
* |
|
* @reg_init_data: The regulator init data. |
|
* @control_flags: Control flags which are ORed value of above flags to |
|
* configure device. |
|
* @junction_temp_warning: Junction temp in millicelcius on which warning need |
|
* to be set. Thermal functionality is only supported on |
|
* MAX77621. The threshold warning supported by MAX77621 |
|
* are 120C and 140C. |
|
* @enable_ext_control: Enable the voltage enable/disable through external |
|
* control signal from EN input pin. If it is false then |
|
* voltage output will be enabled/disabled through EN bit of |
|
* device register. |
|
* @enable_gpio: Enable GPIO. If EN pin is controlled through GPIO from host |
|
* then GPIO number can be provided. If no GPIO controlled then |
|
* it should be -1. |
|
* @dvs_gpio: GPIO for dvs. It should be -1 if this is tied with fixed logic. |
|
* @dvs_def_state: Default state of dvs. 1 if it is high else 0. |
|
*/ |
|
struct max8973_regulator_platform_data { |
|
struct regulator_init_data *reg_init_data; |
|
unsigned long control_flags; |
|
unsigned long junction_temp_warning; |
|
bool enable_ext_control; |
|
int enable_gpio; |
|
int dvs_gpio; |
|
unsigned dvs_def_state:1; |
|
}; |
|
|
|
#endif /* __LINUX_REGULATOR_MAX8973_H */
|
|
|