mirror of https://github.com/Qortal/Brooklyn
You can not select more than 25 topics
Topics must start with a letter or number, can include dashes ('-') and can be up to 35 characters long.
2072 lines
61 KiB
2072 lines
61 KiB
/* starfire.c: Linux device driver for the Adaptec Starfire network adapter. */ |
|
/* |
|
Written 1998-2000 by Donald Becker. |
|
|
|
Current maintainer is Ion Badulescu <ionut ta badula tod org>. Please |
|
send all bug reports to me, and not to Donald Becker, as this code |
|
has been heavily modified from Donald's original version. |
|
|
|
This software may be used and distributed according to the terms of |
|
the GNU General Public License (GPL), incorporated herein by reference. |
|
Drivers based on or derived from this code fall under the GPL and must |
|
retain the authorship, copyright and license notice. This file is not |
|
a complete program and may only be used when the entire operating |
|
system is licensed under the GPL. |
|
|
|
The information below comes from Donald Becker's original driver: |
|
|
|
The author may be reached as [email protected], or C/O |
|
Scyld Computing Corporation |
|
410 Severn Ave., Suite 210 |
|
Annapolis MD 21403 |
|
|
|
Support and updates available at |
|
http://www.scyld.com/network/starfire.html |
|
[link no longer provides useful info -jgarzik] |
|
|
|
*/ |
|
|
|
#define DRV_NAME "starfire" |
|
|
|
#include <linux/interrupt.h> |
|
#include <linux/module.h> |
|
#include <linux/kernel.h> |
|
#include <linux/pci.h> |
|
#include <linux/netdevice.h> |
|
#include <linux/etherdevice.h> |
|
#include <linux/init.h> |
|
#include <linux/delay.h> |
|
#include <linux/crc32.h> |
|
#include <linux/ethtool.h> |
|
#include <linux/mii.h> |
|
#include <linux/if_vlan.h> |
|
#include <linux/mm.h> |
|
#include <linux/firmware.h> |
|
#include <asm/processor.h> /* Processor type for cache alignment. */ |
|
#include <linux/uaccess.h> |
|
#include <asm/io.h> |
|
|
|
/* |
|
* The current frame processor firmware fails to checksum a fragment |
|
* of length 1. If and when this is fixed, the #define below can be removed. |
|
*/ |
|
#define HAS_BROKEN_FIRMWARE |
|
|
|
/* |
|
* If using the broken firmware, data must be padded to the next 32-bit boundary. |
|
*/ |
|
#ifdef HAS_BROKEN_FIRMWARE |
|
#define PADDING_MASK 3 |
|
#endif |
|
|
|
/* |
|
* Define this if using the driver with the zero-copy patch |
|
*/ |
|
#define ZEROCOPY |
|
|
|
#if IS_ENABLED(CONFIG_VLAN_8021Q) |
|
#define VLAN_SUPPORT |
|
#endif |
|
|
|
/* The user-configurable values. |
|
These may be modified when a driver module is loaded.*/ |
|
|
|
/* Used for tuning interrupt latency vs. overhead. */ |
|
static int intr_latency; |
|
static int small_frames; |
|
|
|
static int debug = 1; /* 1 normal messages, 0 quiet .. 7 verbose. */ |
|
static int max_interrupt_work = 20; |
|
static int mtu; |
|
/* Maximum number of multicast addresses to filter (vs. rx-all-multicast). |
|
The Starfire has a 512 element hash table based on the Ethernet CRC. */ |
|
static const int multicast_filter_limit = 512; |
|
/* Whether to do TCP/UDP checksums in hardware */ |
|
static int enable_hw_cksum = 1; |
|
|
|
#define PKT_BUF_SZ 1536 /* Size of each temporary Rx buffer.*/ |
|
/* |
|
* Set the copy breakpoint for the copy-only-tiny-frames scheme. |
|
* Setting to > 1518 effectively disables this feature. |
|
* |
|
* NOTE: |
|
* The ia64 doesn't allow for unaligned loads even of integers being |
|
* misaligned on a 2 byte boundary. Thus always force copying of |
|
* packets as the starfire doesn't allow for misaligned DMAs ;-( |
|
* 23/10/2000 - Jes |
|
* |
|
* The Alpha and the Sparc don't like unaligned loads, either. On Sparc64, |
|
* at least, having unaligned frames leads to a rather serious performance |
|
* penalty. -Ion |
|
*/ |
|
#if defined(__ia64__) || defined(__alpha__) || defined(__sparc__) |
|
static int rx_copybreak = PKT_BUF_SZ; |
|
#else |
|
static int rx_copybreak /* = 0 */; |
|
#endif |
|
|
|
/* PCI DMA burst size -- on sparc64 we want to force it to 64 bytes, on the others the default of 128 is fine. */ |
|
#ifdef __sparc__ |
|
#define DMA_BURST_SIZE 64 |
|
#else |
|
#define DMA_BURST_SIZE 128 |
|
#endif |
|
|
|
/* Operational parameters that are set at compile time. */ |
|
|
|
/* The "native" ring sizes are either 256 or 2048. |
|
However in some modes a descriptor may be marked to wrap the ring earlier. |
|
*/ |
|
#define RX_RING_SIZE 256 |
|
#define TX_RING_SIZE 32 |
|
/* The completion queues are fixed at 1024 entries i.e. 4K or 8KB. */ |
|
#define DONE_Q_SIZE 1024 |
|
/* All queues must be aligned on a 256-byte boundary */ |
|
#define QUEUE_ALIGN 256 |
|
|
|
#if RX_RING_SIZE > 256 |
|
#define RX_Q_ENTRIES Rx2048QEntries |
|
#else |
|
#define RX_Q_ENTRIES Rx256QEntries |
|
#endif |
|
|
|
/* Operational parameters that usually are not changed. */ |
|
/* Time in jiffies before concluding the transmitter is hung. */ |
|
#define TX_TIMEOUT (2 * HZ) |
|
|
|
#ifdef CONFIG_ARCH_DMA_ADDR_T_64BIT |
|
/* 64-bit dma_addr_t */ |
|
#define ADDR_64BITS /* This chip uses 64 bit addresses. */ |
|
#define netdrv_addr_t __le64 |
|
#define cpu_to_dma(x) cpu_to_le64(x) |
|
#define dma_to_cpu(x) le64_to_cpu(x) |
|
#define RX_DESC_Q_ADDR_SIZE RxDescQAddr64bit |
|
#define TX_DESC_Q_ADDR_SIZE TxDescQAddr64bit |
|
#define RX_COMPL_Q_ADDR_SIZE RxComplQAddr64bit |
|
#define TX_COMPL_Q_ADDR_SIZE TxComplQAddr64bit |
|
#define RX_DESC_ADDR_SIZE RxDescAddr64bit |
|
#else /* 32-bit dma_addr_t */ |
|
#define netdrv_addr_t __le32 |
|
#define cpu_to_dma(x) cpu_to_le32(x) |
|
#define dma_to_cpu(x) le32_to_cpu(x) |
|
#define RX_DESC_Q_ADDR_SIZE RxDescQAddr32bit |
|
#define TX_DESC_Q_ADDR_SIZE TxDescQAddr32bit |
|
#define RX_COMPL_Q_ADDR_SIZE RxComplQAddr32bit |
|
#define TX_COMPL_Q_ADDR_SIZE TxComplQAddr32bit |
|
#define RX_DESC_ADDR_SIZE RxDescAddr32bit |
|
#endif |
|
|
|
#define skb_first_frag_len(skb) skb_headlen(skb) |
|
#define skb_num_frags(skb) (skb_shinfo(skb)->nr_frags + 1) |
|
|
|
/* Firmware names */ |
|
#define FIRMWARE_RX "adaptec/starfire_rx.bin" |
|
#define FIRMWARE_TX "adaptec/starfire_tx.bin" |
|
|
|
MODULE_AUTHOR("Donald Becker <[email protected]>"); |
|
MODULE_DESCRIPTION("Adaptec Starfire Ethernet driver"); |
|
MODULE_LICENSE("GPL"); |
|
MODULE_FIRMWARE(FIRMWARE_RX); |
|
MODULE_FIRMWARE(FIRMWARE_TX); |
|
|
|
module_param(max_interrupt_work, int, 0); |
|
module_param(mtu, int, 0); |
|
module_param(debug, int, 0); |
|
module_param(rx_copybreak, int, 0); |
|
module_param(intr_latency, int, 0); |
|
module_param(small_frames, int, 0); |
|
module_param(enable_hw_cksum, int, 0); |
|
MODULE_PARM_DESC(max_interrupt_work, "Maximum events handled per interrupt"); |
|
MODULE_PARM_DESC(mtu, "MTU (all boards)"); |
|
MODULE_PARM_DESC(debug, "Debug level (0-6)"); |
|
MODULE_PARM_DESC(rx_copybreak, "Copy breakpoint for copy-only-tiny-frames"); |
|
MODULE_PARM_DESC(intr_latency, "Maximum interrupt latency, in microseconds"); |
|
MODULE_PARM_DESC(small_frames, "Maximum size of receive frames that bypass interrupt latency (0,64,128,256,512)"); |
|
MODULE_PARM_DESC(enable_hw_cksum, "Enable/disable hardware cksum support (0/1)"); |
|
|
|
/* |
|
Theory of Operation |
|
|
|
I. Board Compatibility |
|
|
|
This driver is for the Adaptec 6915 "Starfire" 64 bit PCI Ethernet adapter. |
|
|
|
II. Board-specific settings |
|
|
|
III. Driver operation |
|
|
|
IIIa. Ring buffers |
|
|
|
The Starfire hardware uses multiple fixed-size descriptor queues/rings. The |
|
ring sizes are set fixed by the hardware, but may optionally be wrapped |
|
earlier by the END bit in the descriptor. |
|
This driver uses that hardware queue size for the Rx ring, where a large |
|
number of entries has no ill effect beyond increases the potential backlog. |
|
The Tx ring is wrapped with the END bit, since a large hardware Tx queue |
|
disables the queue layer priority ordering and we have no mechanism to |
|
utilize the hardware two-level priority queue. When modifying the |
|
RX/TX_RING_SIZE pay close attention to page sizes and the ring-empty warning |
|
levels. |
|
|
|
IIIb/c. Transmit/Receive Structure |
|
|
|
See the Adaptec manual for the many possible structures, and options for |
|
each structure. There are far too many to document all of them here. |
|
|
|
For transmit this driver uses type 0/1 transmit descriptors (depending |
|
on the 32/64 bitness of the architecture), and relies on automatic |
|
minimum-length padding. It does not use the completion queue |
|
consumer index, but instead checks for non-zero status entries. |
|
|
|
For receive this driver uses type 2/3 receive descriptors. The driver |
|
allocates full frame size skbuffs for the Rx ring buffers, so all frames |
|
should fit in a single descriptor. The driver does not use the completion |
|
queue consumer index, but instead checks for non-zero status entries. |
|
|
|
When an incoming frame is less than RX_COPYBREAK bytes long, a fresh skbuff |
|
is allocated and the frame is copied to the new skbuff. When the incoming |
|
frame is larger, the skbuff is passed directly up the protocol stack. |
|
Buffers consumed this way are replaced by newly allocated skbuffs in a later |
|
phase of receive. |
|
|
|
A notable aspect of operation is that unaligned buffers are not permitted by |
|
the Starfire hardware. Thus the IP header at offset 14 in an ethernet frame |
|
isn't longword aligned, which may cause problems on some machine |
|
e.g. Alphas and IA64. For these architectures, the driver is forced to copy |
|
the frame into a new skbuff unconditionally. Copied frames are put into the |
|
skbuff at an offset of "+2", thus 16-byte aligning the IP header. |
|
|
|
IIId. Synchronization |
|
|
|
The driver runs as two independent, single-threaded flows of control. One |
|
is the send-packet routine, which enforces single-threaded use by the |
|
dev->tbusy flag. The other thread is the interrupt handler, which is single |
|
threaded by the hardware and interrupt handling software. |
|
|
|
The send packet thread has partial control over the Tx ring and the netif_queue |
|
status. If the number of free Tx slots in the ring falls below a certain number |
|
(currently hardcoded to 4), it signals the upper layer to stop the queue. |
|
|
|
The interrupt handler has exclusive control over the Rx ring and records stats |
|
from the Tx ring. After reaping the stats, it marks the Tx queue entry as |
|
empty by incrementing the dirty_tx mark. Iff the netif_queue is stopped and the |
|
number of free Tx slow is above the threshold, it signals the upper layer to |
|
restart the queue. |
|
|
|
IV. Notes |
|
|
|
IVb. References |
|
|
|
The Adaptec Starfire manuals, available only from Adaptec. |
|
http://www.scyld.com/expert/100mbps.html |
|
http://www.scyld.com/expert/NWay.html |
|
|
|
IVc. Errata |
|
|
|
- StopOnPerr is broken, don't enable |
|
- Hardware ethernet padding exposes random data, perform software padding |
|
instead (unverified -- works correctly for all the hardware I have) |
|
|
|
*/ |
|
|
|
|
|
|
|
enum chip_capability_flags {CanHaveMII=1, }; |
|
|
|
enum chipset { |
|
CH_6915 = 0, |
|
}; |
|
|
|
static const struct pci_device_id starfire_pci_tbl[] = { |
|
{ PCI_VDEVICE(ADAPTEC, 0x6915), CH_6915 }, |
|
{ 0, } |
|
}; |
|
MODULE_DEVICE_TABLE(pci, starfire_pci_tbl); |
|
|
|
/* A chip capabilities table, matching the CH_xxx entries in xxx_pci_tbl[] above. */ |
|
static const struct chip_info { |
|
const char *name; |
|
int drv_flags; |
|
} netdrv_tbl[] = { |
|
{ "Adaptec Starfire 6915", CanHaveMII }, |
|
}; |
|
|
|
|
|
/* Offsets to the device registers. |
|
Unlike software-only systems, device drivers interact with complex hardware. |
|
It's not useful to define symbolic names for every register bit in the |
|
device. The name can only partially document the semantics and make |
|
the driver longer and more difficult to read. |
|
In general, only the important configuration values or bits changed |
|
multiple times should be defined symbolically. |
|
*/ |
|
enum register_offsets { |
|
PCIDeviceConfig=0x50040, GenCtrl=0x50070, IntrTimerCtrl=0x50074, |
|
IntrClear=0x50080, IntrStatus=0x50084, IntrEnable=0x50088, |
|
MIICtrl=0x52000, TxStationAddr=0x50120, EEPROMCtrl=0x51000, |
|
GPIOCtrl=0x5008C, TxDescCtrl=0x50090, |
|
TxRingPtr=0x50098, HiPriTxRingPtr=0x50094, /* Low and High priority. */ |
|
TxRingHiAddr=0x5009C, /* 64 bit address extension. */ |
|
TxProducerIdx=0x500A0, TxConsumerIdx=0x500A4, |
|
TxThreshold=0x500B0, |
|
CompletionHiAddr=0x500B4, TxCompletionAddr=0x500B8, |
|
RxCompletionAddr=0x500BC, RxCompletionQ2Addr=0x500C0, |
|
CompletionQConsumerIdx=0x500C4, RxDMACtrl=0x500D0, |
|
RxDescQCtrl=0x500D4, RxDescQHiAddr=0x500DC, RxDescQAddr=0x500E0, |
|
RxDescQIdx=0x500E8, RxDMAStatus=0x500F0, RxFilterMode=0x500F4, |
|
TxMode=0x55000, VlanType=0x55064, |
|
PerfFilterTable=0x56000, HashTable=0x56100, |
|
TxGfpMem=0x58000, RxGfpMem=0x5a000, |
|
}; |
|
|
|
/* |
|
* Bits in the interrupt status/mask registers. |
|
* Warning: setting Intr[Ab]NormalSummary in the IntrEnable register |
|
* enables all the interrupt sources that are or'ed into those status bits. |
|
*/ |
|
enum intr_status_bits { |
|
IntrLinkChange=0xf0000000, IntrStatsMax=0x08000000, |
|
IntrAbnormalSummary=0x02000000, IntrGeneralTimer=0x01000000, |
|
IntrSoftware=0x800000, IntrRxComplQ1Low=0x400000, |
|
IntrTxComplQLow=0x200000, IntrPCI=0x100000, |
|
IntrDMAErr=0x080000, IntrTxDataLow=0x040000, |
|
IntrRxComplQ2Low=0x020000, IntrRxDescQ1Low=0x010000, |
|
IntrNormalSummary=0x8000, IntrTxDone=0x4000, |
|
IntrTxDMADone=0x2000, IntrTxEmpty=0x1000, |
|
IntrEarlyRxQ2=0x0800, IntrEarlyRxQ1=0x0400, |
|
IntrRxQ2Done=0x0200, IntrRxQ1Done=0x0100, |
|
IntrRxGFPDead=0x80, IntrRxDescQ2Low=0x40, |
|
IntrNoTxCsum=0x20, IntrTxBadID=0x10, |
|
IntrHiPriTxBadID=0x08, IntrRxGfp=0x04, |
|
IntrTxGfp=0x02, IntrPCIPad=0x01, |
|
/* not quite bits */ |
|
IntrRxDone=IntrRxQ2Done | IntrRxQ1Done, |
|
IntrRxEmpty=IntrRxDescQ1Low | IntrRxDescQ2Low, |
|
IntrNormalMask=0xff00, IntrAbnormalMask=0x3ff00fe, |
|
}; |
|
|
|
/* Bits in the RxFilterMode register. */ |
|
enum rx_mode_bits { |
|
AcceptBroadcast=0x04, AcceptAllMulticast=0x02, AcceptAll=0x01, |
|
AcceptMulticast=0x10, PerfectFilter=0x40, HashFilter=0x30, |
|
PerfectFilterVlan=0x80, MinVLANPrio=0xE000, VlanMode=0x0200, |
|
WakeupOnGFP=0x0800, |
|
}; |
|
|
|
/* Bits in the TxMode register */ |
|
enum tx_mode_bits { |
|
MiiSoftReset=0x8000, MIILoopback=0x4000, |
|
TxFlowEnable=0x0800, RxFlowEnable=0x0400, |
|
PadEnable=0x04, FullDuplex=0x02, HugeFrame=0x01, |
|
}; |
|
|
|
/* Bits in the TxDescCtrl register. */ |
|
enum tx_ctrl_bits { |
|
TxDescSpaceUnlim=0x00, TxDescSpace32=0x10, TxDescSpace64=0x20, |
|
TxDescSpace128=0x30, TxDescSpace256=0x40, |
|
TxDescType0=0x00, TxDescType1=0x01, TxDescType2=0x02, |
|
TxDescType3=0x03, TxDescType4=0x04, |
|
TxNoDMACompletion=0x08, |
|
TxDescQAddr64bit=0x80, TxDescQAddr32bit=0, |
|
TxHiPriFIFOThreshShift=24, TxPadLenShift=16, |
|
TxDMABurstSizeShift=8, |
|
}; |
|
|
|
/* Bits in the RxDescQCtrl register. */ |
|
enum rx_ctrl_bits { |
|
RxBufferLenShift=16, RxMinDescrThreshShift=0, |
|
RxPrefetchMode=0x8000, RxVariableQ=0x2000, |
|
Rx2048QEntries=0x4000, Rx256QEntries=0, |
|
RxDescAddr64bit=0x1000, RxDescAddr32bit=0, |
|
RxDescQAddr64bit=0x0100, RxDescQAddr32bit=0, |
|
RxDescSpace4=0x000, RxDescSpace8=0x100, |
|
RxDescSpace16=0x200, RxDescSpace32=0x300, |
|
RxDescSpace64=0x400, RxDescSpace128=0x500, |
|
RxConsumerWrEn=0x80, |
|
}; |
|
|
|
/* Bits in the RxDMACtrl register. */ |
|
enum rx_dmactrl_bits { |
|
RxReportBadFrames=0x80000000, RxDMAShortFrames=0x40000000, |
|
RxDMABadFrames=0x20000000, RxDMACrcErrorFrames=0x10000000, |
|
RxDMAControlFrame=0x08000000, RxDMAPauseFrame=0x04000000, |
|
RxChecksumIgnore=0, RxChecksumRejectTCPUDP=0x02000000, |
|
RxChecksumRejectTCPOnly=0x01000000, |
|
RxCompletionQ2Enable=0x800000, |
|
RxDMAQ2Disable=0, RxDMAQ2FPOnly=0x100000, |
|
RxDMAQ2SmallPkt=0x200000, RxDMAQ2HighPrio=0x300000, |
|
RxDMAQ2NonIP=0x400000, |
|
RxUseBackupQueue=0x080000, RxDMACRC=0x040000, |
|
RxEarlyIntThreshShift=12, RxHighPrioThreshShift=8, |
|
RxBurstSizeShift=0, |
|
}; |
|
|
|
/* Bits in the RxCompletionAddr register */ |
|
enum rx_compl_bits { |
|
RxComplQAddr64bit=0x80, RxComplQAddr32bit=0, |
|
RxComplProducerWrEn=0x40, |
|
RxComplType0=0x00, RxComplType1=0x10, |
|
RxComplType2=0x20, RxComplType3=0x30, |
|
RxComplThreshShift=0, |
|
}; |
|
|
|
/* Bits in the TxCompletionAddr register */ |
|
enum tx_compl_bits { |
|
TxComplQAddr64bit=0x80, TxComplQAddr32bit=0, |
|
TxComplProducerWrEn=0x40, |
|
TxComplIntrStatus=0x20, |
|
CommonQueueMode=0x10, |
|
TxComplThreshShift=0, |
|
}; |
|
|
|
/* Bits in the GenCtrl register */ |
|
enum gen_ctrl_bits { |
|
RxEnable=0x05, TxEnable=0x0a, |
|
RxGFPEnable=0x10, TxGFPEnable=0x20, |
|
}; |
|
|
|
/* Bits in the IntrTimerCtrl register */ |
|
enum intr_ctrl_bits { |
|
Timer10X=0x800, EnableIntrMasking=0x60, SmallFrameBypass=0x100, |
|
SmallFrame64=0, SmallFrame128=0x200, SmallFrame256=0x400, SmallFrame512=0x600, |
|
IntrLatencyMask=0x1f, |
|
}; |
|
|
|
/* The Rx and Tx buffer descriptors. */ |
|
struct starfire_rx_desc { |
|
netdrv_addr_t rxaddr; |
|
}; |
|
enum rx_desc_bits { |
|
RxDescValid=1, RxDescEndRing=2, |
|
}; |
|
|
|
/* Completion queue entry. */ |
|
struct short_rx_done_desc { |
|
__le32 status; /* Low 16 bits is length. */ |
|
}; |
|
struct basic_rx_done_desc { |
|
__le32 status; /* Low 16 bits is length. */ |
|
__le16 vlanid; |
|
__le16 status2; |
|
}; |
|
struct csum_rx_done_desc { |
|
__le32 status; /* Low 16 bits is length. */ |
|
__le16 csum; /* Partial checksum */ |
|
__le16 status2; |
|
}; |
|
struct full_rx_done_desc { |
|
__le32 status; /* Low 16 bits is length. */ |
|
__le16 status3; |
|
__le16 status2; |
|
__le16 vlanid; |
|
__le16 csum; /* partial checksum */ |
|
__le32 timestamp; |
|
}; |
|
/* XXX: this is ugly and I'm not sure it's worth the trouble -Ion */ |
|
#ifdef VLAN_SUPPORT |
|
typedef struct full_rx_done_desc rx_done_desc; |
|
#define RxComplType RxComplType3 |
|
#else /* not VLAN_SUPPORT */ |
|
typedef struct csum_rx_done_desc rx_done_desc; |
|
#define RxComplType RxComplType2 |
|
#endif /* not VLAN_SUPPORT */ |
|
|
|
enum rx_done_bits { |
|
RxOK=0x20000000, RxFIFOErr=0x10000000, RxBufQ2=0x08000000, |
|
}; |
|
|
|
/* Type 1 Tx descriptor. */ |
|
struct starfire_tx_desc_1 { |
|
__le32 status; /* Upper bits are status, lower 16 length. */ |
|
__le32 addr; |
|
}; |
|
|
|
/* Type 2 Tx descriptor. */ |
|
struct starfire_tx_desc_2 { |
|
__le32 status; /* Upper bits are status, lower 16 length. */ |
|
__le32 reserved; |
|
__le64 addr; |
|
}; |
|
|
|
#ifdef ADDR_64BITS |
|
typedef struct starfire_tx_desc_2 starfire_tx_desc; |
|
#define TX_DESC_TYPE TxDescType2 |
|
#else /* not ADDR_64BITS */ |
|
typedef struct starfire_tx_desc_1 starfire_tx_desc; |
|
#define TX_DESC_TYPE TxDescType1 |
|
#endif /* not ADDR_64BITS */ |
|
#define TX_DESC_SPACING TxDescSpaceUnlim |
|
|
|
enum tx_desc_bits { |
|
TxDescID=0xB0000000, |
|
TxCRCEn=0x01000000, TxDescIntr=0x08000000, |
|
TxRingWrap=0x04000000, TxCalTCP=0x02000000, |
|
}; |
|
struct tx_done_desc { |
|
__le32 status; /* timestamp, index. */ |
|
#if 0 |
|
__le32 intrstatus; /* interrupt status */ |
|
#endif |
|
}; |
|
|
|
struct rx_ring_info { |
|
struct sk_buff *skb; |
|
dma_addr_t mapping; |
|
}; |
|
struct tx_ring_info { |
|
struct sk_buff *skb; |
|
dma_addr_t mapping; |
|
unsigned int used_slots; |
|
}; |
|
|
|
#define PHY_CNT 2 |
|
struct netdev_private { |
|
/* Descriptor rings first for alignment. */ |
|
struct starfire_rx_desc *rx_ring; |
|
starfire_tx_desc *tx_ring; |
|
dma_addr_t rx_ring_dma; |
|
dma_addr_t tx_ring_dma; |
|
/* The addresses of rx/tx-in-place skbuffs. */ |
|
struct rx_ring_info rx_info[RX_RING_SIZE]; |
|
struct tx_ring_info tx_info[TX_RING_SIZE]; |
|
/* Pointers to completion queues (full pages). */ |
|
rx_done_desc *rx_done_q; |
|
dma_addr_t rx_done_q_dma; |
|
unsigned int rx_done; |
|
struct tx_done_desc *tx_done_q; |
|
dma_addr_t tx_done_q_dma; |
|
unsigned int tx_done; |
|
struct napi_struct napi; |
|
struct net_device *dev; |
|
struct pci_dev *pci_dev; |
|
#ifdef VLAN_SUPPORT |
|
unsigned long active_vlans[BITS_TO_LONGS(VLAN_N_VID)]; |
|
#endif |
|
void *queue_mem; |
|
dma_addr_t queue_mem_dma; |
|
size_t queue_mem_size; |
|
|
|
/* Frequently used values: keep some adjacent for cache effect. */ |
|
spinlock_t lock; |
|
unsigned int cur_rx, dirty_rx; /* Producer/consumer ring indices */ |
|
unsigned int cur_tx, dirty_tx, reap_tx; |
|
unsigned int rx_buf_sz; /* Based on MTU+slack. */ |
|
/* These values keep track of the transceiver/media in use. */ |
|
int speed100; /* Set if speed == 100MBit. */ |
|
u32 tx_mode; |
|
u32 intr_timer_ctrl; |
|
u8 tx_threshold; |
|
/* MII transceiver section. */ |
|
struct mii_if_info mii_if; /* MII lib hooks/info */ |
|
int phy_cnt; /* MII device addresses. */ |
|
unsigned char phys[PHY_CNT]; /* MII device addresses. */ |
|
void __iomem *base; |
|
}; |
|
|
|
|
|
static int mdio_read(struct net_device *dev, int phy_id, int location); |
|
static void mdio_write(struct net_device *dev, int phy_id, int location, int value); |
|
static int netdev_open(struct net_device *dev); |
|
static void check_duplex(struct net_device *dev); |
|
static void tx_timeout(struct net_device *dev, unsigned int txqueue); |
|
static void init_ring(struct net_device *dev); |
|
static netdev_tx_t start_tx(struct sk_buff *skb, struct net_device *dev); |
|
static irqreturn_t intr_handler(int irq, void *dev_instance); |
|
static void netdev_error(struct net_device *dev, int intr_status); |
|
static int __netdev_rx(struct net_device *dev, int *quota); |
|
static int netdev_poll(struct napi_struct *napi, int budget); |
|
static void refill_rx_ring(struct net_device *dev); |
|
static void netdev_error(struct net_device *dev, int intr_status); |
|
static void set_rx_mode(struct net_device *dev); |
|
static struct net_device_stats *get_stats(struct net_device *dev); |
|
static int netdev_ioctl(struct net_device *dev, struct ifreq *rq, int cmd); |
|
static int netdev_close(struct net_device *dev); |
|
static void netdev_media_change(struct net_device *dev); |
|
static const struct ethtool_ops ethtool_ops; |
|
|
|
|
|
#ifdef VLAN_SUPPORT |
|
static int netdev_vlan_rx_add_vid(struct net_device *dev, |
|
__be16 proto, u16 vid) |
|
{ |
|
struct netdev_private *np = netdev_priv(dev); |
|
|
|
spin_lock(&np->lock); |
|
if (debug > 1) |
|
printk("%s: Adding vlanid %d to vlan filter\n", dev->name, vid); |
|
set_bit(vid, np->active_vlans); |
|
set_rx_mode(dev); |
|
spin_unlock(&np->lock); |
|
|
|
return 0; |
|
} |
|
|
|
static int netdev_vlan_rx_kill_vid(struct net_device *dev, |
|
__be16 proto, u16 vid) |
|
{ |
|
struct netdev_private *np = netdev_priv(dev); |
|
|
|
spin_lock(&np->lock); |
|
if (debug > 1) |
|
printk("%s: removing vlanid %d from vlan filter\n", dev->name, vid); |
|
clear_bit(vid, np->active_vlans); |
|
set_rx_mode(dev); |
|
spin_unlock(&np->lock); |
|
|
|
return 0; |
|
} |
|
#endif /* VLAN_SUPPORT */ |
|
|
|
|
|
static const struct net_device_ops netdev_ops = { |
|
.ndo_open = netdev_open, |
|
.ndo_stop = netdev_close, |
|
.ndo_start_xmit = start_tx, |
|
.ndo_tx_timeout = tx_timeout, |
|
.ndo_get_stats = get_stats, |
|
.ndo_set_rx_mode = set_rx_mode, |
|
.ndo_do_ioctl = netdev_ioctl, |
|
.ndo_set_mac_address = eth_mac_addr, |
|
.ndo_validate_addr = eth_validate_addr, |
|
#ifdef VLAN_SUPPORT |
|
.ndo_vlan_rx_add_vid = netdev_vlan_rx_add_vid, |
|
.ndo_vlan_rx_kill_vid = netdev_vlan_rx_kill_vid, |
|
#endif |
|
}; |
|
|
|
static int starfire_init_one(struct pci_dev *pdev, |
|
const struct pci_device_id *ent) |
|
{ |
|
struct device *d = &pdev->dev; |
|
struct netdev_private *np; |
|
int i, irq, chip_idx = ent->driver_data; |
|
struct net_device *dev; |
|
long ioaddr; |
|
void __iomem *base; |
|
int drv_flags, io_size; |
|
int boguscnt; |
|
|
|
if (pci_enable_device (pdev)) |
|
return -EIO; |
|
|
|
ioaddr = pci_resource_start(pdev, 0); |
|
io_size = pci_resource_len(pdev, 0); |
|
if (!ioaddr || ((pci_resource_flags(pdev, 0) & IORESOURCE_MEM) == 0)) { |
|
dev_err(d, "no PCI MEM resources, aborting\n"); |
|
return -ENODEV; |
|
} |
|
|
|
dev = alloc_etherdev(sizeof(*np)); |
|
if (!dev) |
|
return -ENOMEM; |
|
|
|
SET_NETDEV_DEV(dev, &pdev->dev); |
|
|
|
irq = pdev->irq; |
|
|
|
if (pci_request_regions (pdev, DRV_NAME)) { |
|
dev_err(d, "cannot reserve PCI resources, aborting\n"); |
|
goto err_out_free_netdev; |
|
} |
|
|
|
base = ioremap(ioaddr, io_size); |
|
if (!base) { |
|
dev_err(d, "cannot remap %#x @ %#lx, aborting\n", |
|
io_size, ioaddr); |
|
goto err_out_free_res; |
|
} |
|
|
|
pci_set_master(pdev); |
|
|
|
/* enable MWI -- it vastly improves Rx performance on sparc64 */ |
|
pci_try_set_mwi(pdev); |
|
|
|
#ifdef ZEROCOPY |
|
/* Starfire can do TCP/UDP checksumming */ |
|
if (enable_hw_cksum) |
|
dev->features |= NETIF_F_IP_CSUM | NETIF_F_SG; |
|
#endif /* ZEROCOPY */ |
|
|
|
#ifdef VLAN_SUPPORT |
|
dev->features |= NETIF_F_HW_VLAN_CTAG_RX | NETIF_F_HW_VLAN_CTAG_FILTER; |
|
#endif /* VLAN_RX_KILL_VID */ |
|
#ifdef ADDR_64BITS |
|
dev->features |= NETIF_F_HIGHDMA; |
|
#endif /* ADDR_64BITS */ |
|
|
|
/* Serial EEPROM reads are hidden by the hardware. */ |
|
for (i = 0; i < 6; i++) |
|
dev->dev_addr[i] = readb(base + EEPROMCtrl + 20 - i); |
|
|
|
#if ! defined(final_version) /* Dump the EEPROM contents during development. */ |
|
if (debug > 4) |
|
for (i = 0; i < 0x20; i++) |
|
printk("%2.2x%s", |
|
(unsigned int)readb(base + EEPROMCtrl + i), |
|
i % 16 != 15 ? " " : "\n"); |
|
#endif |
|
|
|
/* Issue soft reset */ |
|
writel(MiiSoftReset, base + TxMode); |
|
udelay(1000); |
|
writel(0, base + TxMode); |
|
|
|
/* Reset the chip to erase previous misconfiguration. */ |
|
writel(1, base + PCIDeviceConfig); |
|
boguscnt = 1000; |
|
while (--boguscnt > 0) { |
|
udelay(10); |
|
if ((readl(base + PCIDeviceConfig) & 1) == 0) |
|
break; |
|
} |
|
if (boguscnt == 0) |
|
printk("%s: chipset reset never completed!\n", dev->name); |
|
/* wait a little longer */ |
|
udelay(1000); |
|
|
|
np = netdev_priv(dev); |
|
np->dev = dev; |
|
np->base = base; |
|
spin_lock_init(&np->lock); |
|
pci_set_drvdata(pdev, dev); |
|
|
|
np->pci_dev = pdev; |
|
|
|
np->mii_if.dev = dev; |
|
np->mii_if.mdio_read = mdio_read; |
|
np->mii_if.mdio_write = mdio_write; |
|
np->mii_if.phy_id_mask = 0x1f; |
|
np->mii_if.reg_num_mask = 0x1f; |
|
|
|
drv_flags = netdrv_tbl[chip_idx].drv_flags; |
|
|
|
np->speed100 = 1; |
|
|
|
/* timer resolution is 128 * 0.8us */ |
|
np->intr_timer_ctrl = (((intr_latency * 10) / 1024) & IntrLatencyMask) | |
|
Timer10X | EnableIntrMasking; |
|
|
|
if (small_frames > 0) { |
|
np->intr_timer_ctrl |= SmallFrameBypass; |
|
switch (small_frames) { |
|
case 1 ... 64: |
|
np->intr_timer_ctrl |= SmallFrame64; |
|
break; |
|
case 65 ... 128: |
|
np->intr_timer_ctrl |= SmallFrame128; |
|
break; |
|
case 129 ... 256: |
|
np->intr_timer_ctrl |= SmallFrame256; |
|
break; |
|
default: |
|
np->intr_timer_ctrl |= SmallFrame512; |
|
if (small_frames > 512) |
|
printk("Adjusting small_frames down to 512\n"); |
|
break; |
|
} |
|
} |
|
|
|
dev->netdev_ops = &netdev_ops; |
|
dev->watchdog_timeo = TX_TIMEOUT; |
|
dev->ethtool_ops = ðtool_ops; |
|
|
|
netif_napi_add(dev, &np->napi, netdev_poll, max_interrupt_work); |
|
|
|
if (mtu) |
|
dev->mtu = mtu; |
|
|
|
if (register_netdev(dev)) |
|
goto err_out_cleardev; |
|
|
|
printk(KERN_INFO "%s: %s at %p, %pM, IRQ %d.\n", |
|
dev->name, netdrv_tbl[chip_idx].name, base, |
|
dev->dev_addr, irq); |
|
|
|
if (drv_flags & CanHaveMII) { |
|
int phy, phy_idx = 0; |
|
int mii_status; |
|
for (phy = 0; phy < 32 && phy_idx < PHY_CNT; phy++) { |
|
mdio_write(dev, phy, MII_BMCR, BMCR_RESET); |
|
msleep(100); |
|
boguscnt = 1000; |
|
while (--boguscnt > 0) |
|
if ((mdio_read(dev, phy, MII_BMCR) & BMCR_RESET) == 0) |
|
break; |
|
if (boguscnt == 0) { |
|
printk("%s: PHY#%d reset never completed!\n", dev->name, phy); |
|
continue; |
|
} |
|
mii_status = mdio_read(dev, phy, MII_BMSR); |
|
if (mii_status != 0) { |
|
np->phys[phy_idx++] = phy; |
|
np->mii_if.advertising = mdio_read(dev, phy, MII_ADVERTISE); |
|
printk(KERN_INFO "%s: MII PHY found at address %d, status " |
|
"%#4.4x advertising %#4.4x.\n", |
|
dev->name, phy, mii_status, np->mii_if.advertising); |
|
/* there can be only one PHY on-board */ |
|
break; |
|
} |
|
} |
|
np->phy_cnt = phy_idx; |
|
if (np->phy_cnt > 0) |
|
np->mii_if.phy_id = np->phys[0]; |
|
else |
|
memset(&np->mii_if, 0, sizeof(np->mii_if)); |
|
} |
|
|
|
printk(KERN_INFO "%s: scatter-gather and hardware TCP cksumming %s.\n", |
|
dev->name, enable_hw_cksum ? "enabled" : "disabled"); |
|
return 0; |
|
|
|
err_out_cleardev: |
|
iounmap(base); |
|
err_out_free_res: |
|
pci_release_regions (pdev); |
|
err_out_free_netdev: |
|
free_netdev(dev); |
|
return -ENODEV; |
|
} |
|
|
|
|
|
/* Read the MII Management Data I/O (MDIO) interfaces. */ |
|
static int mdio_read(struct net_device *dev, int phy_id, int location) |
|
{ |
|
struct netdev_private *np = netdev_priv(dev); |
|
void __iomem *mdio_addr = np->base + MIICtrl + (phy_id<<7) + (location<<2); |
|
int result, boguscnt=1000; |
|
/* ??? Should we add a busy-wait here? */ |
|
do { |
|
result = readl(mdio_addr); |
|
} while ((result & 0xC0000000) != 0x80000000 && --boguscnt > 0); |
|
if (boguscnt == 0) |
|
return 0; |
|
if ((result & 0xffff) == 0xffff) |
|
return 0; |
|
return result & 0xffff; |
|
} |
|
|
|
|
|
static void mdio_write(struct net_device *dev, int phy_id, int location, int value) |
|
{ |
|
struct netdev_private *np = netdev_priv(dev); |
|
void __iomem *mdio_addr = np->base + MIICtrl + (phy_id<<7) + (location<<2); |
|
writel(value, mdio_addr); |
|
/* The busy-wait will occur before a read. */ |
|
} |
|
|
|
|
|
static int netdev_open(struct net_device *dev) |
|
{ |
|
const struct firmware *fw_rx, *fw_tx; |
|
const __be32 *fw_rx_data, *fw_tx_data; |
|
struct netdev_private *np = netdev_priv(dev); |
|
void __iomem *ioaddr = np->base; |
|
const int irq = np->pci_dev->irq; |
|
int i, retval; |
|
size_t tx_size, rx_size; |
|
size_t tx_done_q_size, rx_done_q_size, tx_ring_size, rx_ring_size; |
|
|
|
/* Do we ever need to reset the chip??? */ |
|
|
|
retval = request_irq(irq, intr_handler, IRQF_SHARED, dev->name, dev); |
|
if (retval) |
|
return retval; |
|
|
|
/* Disable the Rx and Tx, and reset the chip. */ |
|
writel(0, ioaddr + GenCtrl); |
|
writel(1, ioaddr + PCIDeviceConfig); |
|
if (debug > 1) |
|
printk(KERN_DEBUG "%s: netdev_open() irq %d.\n", |
|
dev->name, irq); |
|
|
|
/* Allocate the various queues. */ |
|
if (!np->queue_mem) { |
|
tx_done_q_size = ((sizeof(struct tx_done_desc) * DONE_Q_SIZE + QUEUE_ALIGN - 1) / QUEUE_ALIGN) * QUEUE_ALIGN; |
|
rx_done_q_size = ((sizeof(rx_done_desc) * DONE_Q_SIZE + QUEUE_ALIGN - 1) / QUEUE_ALIGN) * QUEUE_ALIGN; |
|
tx_ring_size = ((sizeof(starfire_tx_desc) * TX_RING_SIZE + QUEUE_ALIGN - 1) / QUEUE_ALIGN) * QUEUE_ALIGN; |
|
rx_ring_size = sizeof(struct starfire_rx_desc) * RX_RING_SIZE; |
|
np->queue_mem_size = tx_done_q_size + rx_done_q_size + tx_ring_size + rx_ring_size; |
|
np->queue_mem = dma_alloc_coherent(&np->pci_dev->dev, |
|
np->queue_mem_size, |
|
&np->queue_mem_dma, GFP_ATOMIC); |
|
if (np->queue_mem == NULL) { |
|
free_irq(irq, dev); |
|
return -ENOMEM; |
|
} |
|
|
|
np->tx_done_q = np->queue_mem; |
|
np->tx_done_q_dma = np->queue_mem_dma; |
|
np->rx_done_q = (void *) np->tx_done_q + tx_done_q_size; |
|
np->rx_done_q_dma = np->tx_done_q_dma + tx_done_q_size; |
|
np->tx_ring = (void *) np->rx_done_q + rx_done_q_size; |
|
np->tx_ring_dma = np->rx_done_q_dma + rx_done_q_size; |
|
np->rx_ring = (void *) np->tx_ring + tx_ring_size; |
|
np->rx_ring_dma = np->tx_ring_dma + tx_ring_size; |
|
} |
|
|
|
/* Start with no carrier, it gets adjusted later */ |
|
netif_carrier_off(dev); |
|
init_ring(dev); |
|
/* Set the size of the Rx buffers. */ |
|
writel((np->rx_buf_sz << RxBufferLenShift) | |
|
(0 << RxMinDescrThreshShift) | |
|
RxPrefetchMode | RxVariableQ | |
|
RX_Q_ENTRIES | |
|
RX_DESC_Q_ADDR_SIZE | RX_DESC_ADDR_SIZE | |
|
RxDescSpace4, |
|
ioaddr + RxDescQCtrl); |
|
|
|
/* Set up the Rx DMA controller. */ |
|
writel(RxChecksumIgnore | |
|
(0 << RxEarlyIntThreshShift) | |
|
(6 << RxHighPrioThreshShift) | |
|
((DMA_BURST_SIZE / 32) << RxBurstSizeShift), |
|
ioaddr + RxDMACtrl); |
|
|
|
/* Set Tx descriptor */ |
|
writel((2 << TxHiPriFIFOThreshShift) | |
|
(0 << TxPadLenShift) | |
|
((DMA_BURST_SIZE / 32) << TxDMABurstSizeShift) | |
|
TX_DESC_Q_ADDR_SIZE | |
|
TX_DESC_SPACING | TX_DESC_TYPE, |
|
ioaddr + TxDescCtrl); |
|
|
|
writel( (np->queue_mem_dma >> 16) >> 16, ioaddr + RxDescQHiAddr); |
|
writel( (np->queue_mem_dma >> 16) >> 16, ioaddr + TxRingHiAddr); |
|
writel( (np->queue_mem_dma >> 16) >> 16, ioaddr + CompletionHiAddr); |
|
writel(np->rx_ring_dma, ioaddr + RxDescQAddr); |
|
writel(np->tx_ring_dma, ioaddr + TxRingPtr); |
|
|
|
writel(np->tx_done_q_dma, ioaddr + TxCompletionAddr); |
|
writel(np->rx_done_q_dma | |
|
RxComplType | |
|
(0 << RxComplThreshShift), |
|
ioaddr + RxCompletionAddr); |
|
|
|
if (debug > 1) |
|
printk(KERN_DEBUG "%s: Filling in the station address.\n", dev->name); |
|
|
|
/* Fill both the Tx SA register and the Rx perfect filter. */ |
|
for (i = 0; i < 6; i++) |
|
writeb(dev->dev_addr[i], ioaddr + TxStationAddr + 5 - i); |
|
/* The first entry is special because it bypasses the VLAN filter. |
|
Don't use it. */ |
|
writew(0, ioaddr + PerfFilterTable); |
|
writew(0, ioaddr + PerfFilterTable + 4); |
|
writew(0, ioaddr + PerfFilterTable + 8); |
|
for (i = 1; i < 16; i++) { |
|
__be16 *eaddrs = (__be16 *)dev->dev_addr; |
|
void __iomem *setup_frm = ioaddr + PerfFilterTable + i * 16; |
|
writew(be16_to_cpu(eaddrs[2]), setup_frm); setup_frm += 4; |
|
writew(be16_to_cpu(eaddrs[1]), setup_frm); setup_frm += 4; |
|
writew(be16_to_cpu(eaddrs[0]), setup_frm); setup_frm += 8; |
|
} |
|
|
|
/* Initialize other registers. */ |
|
/* Configure the PCI bus bursts and FIFO thresholds. */ |
|
np->tx_mode = TxFlowEnable|RxFlowEnable|PadEnable; /* modified when link is up. */ |
|
writel(MiiSoftReset | np->tx_mode, ioaddr + TxMode); |
|
udelay(1000); |
|
writel(np->tx_mode, ioaddr + TxMode); |
|
np->tx_threshold = 4; |
|
writel(np->tx_threshold, ioaddr + TxThreshold); |
|
|
|
writel(np->intr_timer_ctrl, ioaddr + IntrTimerCtrl); |
|
|
|
napi_enable(&np->napi); |
|
|
|
netif_start_queue(dev); |
|
|
|
if (debug > 1) |
|
printk(KERN_DEBUG "%s: Setting the Rx and Tx modes.\n", dev->name); |
|
set_rx_mode(dev); |
|
|
|
np->mii_if.advertising = mdio_read(dev, np->phys[0], MII_ADVERTISE); |
|
check_duplex(dev); |
|
|
|
/* Enable GPIO interrupts on link change */ |
|
writel(0x0f00ff00, ioaddr + GPIOCtrl); |
|
|
|
/* Set the interrupt mask */ |
|
writel(IntrRxDone | IntrRxEmpty | IntrDMAErr | |
|
IntrTxDMADone | IntrStatsMax | IntrLinkChange | |
|
IntrRxGFPDead | IntrNoTxCsum | IntrTxBadID, |
|
ioaddr + IntrEnable); |
|
/* Enable PCI interrupts. */ |
|
writel(0x00800000 | readl(ioaddr + PCIDeviceConfig), |
|
ioaddr + PCIDeviceConfig); |
|
|
|
#ifdef VLAN_SUPPORT |
|
/* Set VLAN type to 802.1q */ |
|
writel(ETH_P_8021Q, ioaddr + VlanType); |
|
#endif /* VLAN_SUPPORT */ |
|
|
|
retval = request_firmware(&fw_rx, FIRMWARE_RX, &np->pci_dev->dev); |
|
if (retval) { |
|
printk(KERN_ERR "starfire: Failed to load firmware \"%s\"\n", |
|
FIRMWARE_RX); |
|
goto out_init; |
|
} |
|
if (fw_rx->size % 4) { |
|
printk(KERN_ERR "starfire: bogus length %zu in \"%s\"\n", |
|
fw_rx->size, FIRMWARE_RX); |
|
retval = -EINVAL; |
|
goto out_rx; |
|
} |
|
retval = request_firmware(&fw_tx, FIRMWARE_TX, &np->pci_dev->dev); |
|
if (retval) { |
|
printk(KERN_ERR "starfire: Failed to load firmware \"%s\"\n", |
|
FIRMWARE_TX); |
|
goto out_rx; |
|
} |
|
if (fw_tx->size % 4) { |
|
printk(KERN_ERR "starfire: bogus length %zu in \"%s\"\n", |
|
fw_tx->size, FIRMWARE_TX); |
|
retval = -EINVAL; |
|
goto out_tx; |
|
} |
|
fw_rx_data = (const __be32 *)&fw_rx->data[0]; |
|
fw_tx_data = (const __be32 *)&fw_tx->data[0]; |
|
rx_size = fw_rx->size / 4; |
|
tx_size = fw_tx->size / 4; |
|
|
|
/* Load Rx/Tx firmware into the frame processors */ |
|
for (i = 0; i < rx_size; i++) |
|
writel(be32_to_cpup(&fw_rx_data[i]), ioaddr + RxGfpMem + i * 4); |
|
for (i = 0; i < tx_size; i++) |
|
writel(be32_to_cpup(&fw_tx_data[i]), ioaddr + TxGfpMem + i * 4); |
|
if (enable_hw_cksum) |
|
/* Enable the Rx and Tx units, and the Rx/Tx frame processors. */ |
|
writel(TxEnable|TxGFPEnable|RxEnable|RxGFPEnable, ioaddr + GenCtrl); |
|
else |
|
/* Enable the Rx and Tx units only. */ |
|
writel(TxEnable|RxEnable, ioaddr + GenCtrl); |
|
|
|
if (debug > 1) |
|
printk(KERN_DEBUG "%s: Done netdev_open().\n", |
|
dev->name); |
|
|
|
out_tx: |
|
release_firmware(fw_tx); |
|
out_rx: |
|
release_firmware(fw_rx); |
|
out_init: |
|
if (retval) |
|
netdev_close(dev); |
|
return retval; |
|
} |
|
|
|
|
|
static void check_duplex(struct net_device *dev) |
|
{ |
|
struct netdev_private *np = netdev_priv(dev); |
|
u16 reg0; |
|
int silly_count = 1000; |
|
|
|
mdio_write(dev, np->phys[0], MII_ADVERTISE, np->mii_if.advertising); |
|
mdio_write(dev, np->phys[0], MII_BMCR, BMCR_RESET); |
|
udelay(500); |
|
while (--silly_count && mdio_read(dev, np->phys[0], MII_BMCR) & BMCR_RESET) |
|
/* do nothing */; |
|
if (!silly_count) { |
|
printk("%s: MII reset failed!\n", dev->name); |
|
return; |
|
} |
|
|
|
reg0 = mdio_read(dev, np->phys[0], MII_BMCR); |
|
|
|
if (!np->mii_if.force_media) { |
|
reg0 |= BMCR_ANENABLE | BMCR_ANRESTART; |
|
} else { |
|
reg0 &= ~(BMCR_ANENABLE | BMCR_ANRESTART); |
|
if (np->speed100) |
|
reg0 |= BMCR_SPEED100; |
|
if (np->mii_if.full_duplex) |
|
reg0 |= BMCR_FULLDPLX; |
|
printk(KERN_DEBUG "%s: Link forced to %sMbit %s-duplex\n", |
|
dev->name, |
|
np->speed100 ? "100" : "10", |
|
np->mii_if.full_duplex ? "full" : "half"); |
|
} |
|
mdio_write(dev, np->phys[0], MII_BMCR, reg0); |
|
} |
|
|
|
|
|
static void tx_timeout(struct net_device *dev, unsigned int txqueue) |
|
{ |
|
struct netdev_private *np = netdev_priv(dev); |
|
void __iomem *ioaddr = np->base; |
|
int old_debug; |
|
|
|
printk(KERN_WARNING "%s: Transmit timed out, status %#8.8x, " |
|
"resetting...\n", dev->name, (int) readl(ioaddr + IntrStatus)); |
|
|
|
/* Perhaps we should reinitialize the hardware here. */ |
|
|
|
/* |
|
* Stop and restart the interface. |
|
* Cheat and increase the debug level temporarily. |
|
*/ |
|
old_debug = debug; |
|
debug = 2; |
|
netdev_close(dev); |
|
netdev_open(dev); |
|
debug = old_debug; |
|
|
|
/* Trigger an immediate transmit demand. */ |
|
|
|
netif_trans_update(dev); /* prevent tx timeout */ |
|
dev->stats.tx_errors++; |
|
netif_wake_queue(dev); |
|
} |
|
|
|
|
|
/* Initialize the Rx and Tx rings, along with various 'dev' bits. */ |
|
static void init_ring(struct net_device *dev) |
|
{ |
|
struct netdev_private *np = netdev_priv(dev); |
|
int i; |
|
|
|
np->cur_rx = np->cur_tx = np->reap_tx = 0; |
|
np->dirty_rx = np->dirty_tx = np->rx_done = np->tx_done = 0; |
|
|
|
np->rx_buf_sz = (dev->mtu <= 1500 ? PKT_BUF_SZ : dev->mtu + 32); |
|
|
|
/* Fill in the Rx buffers. Handle allocation failure gracefully. */ |
|
for (i = 0; i < RX_RING_SIZE; i++) { |
|
struct sk_buff *skb = netdev_alloc_skb(dev, np->rx_buf_sz); |
|
np->rx_info[i].skb = skb; |
|
if (skb == NULL) |
|
break; |
|
np->rx_info[i].mapping = dma_map_single(&np->pci_dev->dev, |
|
skb->data, |
|
np->rx_buf_sz, |
|
DMA_FROM_DEVICE); |
|
if (dma_mapping_error(&np->pci_dev->dev, np->rx_info[i].mapping)) { |
|
dev_kfree_skb(skb); |
|
np->rx_info[i].skb = NULL; |
|
break; |
|
} |
|
/* Grrr, we cannot offset to correctly align the IP header. */ |
|
np->rx_ring[i].rxaddr = cpu_to_dma(np->rx_info[i].mapping | RxDescValid); |
|
} |
|
writew(i - 1, np->base + RxDescQIdx); |
|
np->dirty_rx = (unsigned int)(i - RX_RING_SIZE); |
|
|
|
/* Clear the remainder of the Rx buffer ring. */ |
|
for ( ; i < RX_RING_SIZE; i++) { |
|
np->rx_ring[i].rxaddr = 0; |
|
np->rx_info[i].skb = NULL; |
|
np->rx_info[i].mapping = 0; |
|
} |
|
/* Mark the last entry as wrapping the ring. */ |
|
np->rx_ring[RX_RING_SIZE - 1].rxaddr |= cpu_to_dma(RxDescEndRing); |
|
|
|
/* Clear the completion rings. */ |
|
for (i = 0; i < DONE_Q_SIZE; i++) { |
|
np->rx_done_q[i].status = 0; |
|
np->tx_done_q[i].status = 0; |
|
} |
|
|
|
for (i = 0; i < TX_RING_SIZE; i++) |
|
memset(&np->tx_info[i], 0, sizeof(np->tx_info[i])); |
|
} |
|
|
|
|
|
static netdev_tx_t start_tx(struct sk_buff *skb, struct net_device *dev) |
|
{ |
|
struct netdev_private *np = netdev_priv(dev); |
|
unsigned int entry; |
|
unsigned int prev_tx; |
|
u32 status; |
|
int i, j; |
|
|
|
/* |
|
* be cautious here, wrapping the queue has weird semantics |
|
* and we may not have enough slots even when it seems we do. |
|
*/ |
|
if ((np->cur_tx - np->dirty_tx) + skb_num_frags(skb) * 2 > TX_RING_SIZE) { |
|
netif_stop_queue(dev); |
|
return NETDEV_TX_BUSY; |
|
} |
|
|
|
#if defined(ZEROCOPY) && defined(HAS_BROKEN_FIRMWARE) |
|
if (skb->ip_summed == CHECKSUM_PARTIAL) { |
|
if (skb_padto(skb, (skb->len + PADDING_MASK) & ~PADDING_MASK)) |
|
return NETDEV_TX_OK; |
|
} |
|
#endif /* ZEROCOPY && HAS_BROKEN_FIRMWARE */ |
|
|
|
prev_tx = np->cur_tx; |
|
entry = np->cur_tx % TX_RING_SIZE; |
|
for (i = 0; i < skb_num_frags(skb); i++) { |
|
int wrap_ring = 0; |
|
status = TxDescID; |
|
|
|
if (i == 0) { |
|
np->tx_info[entry].skb = skb; |
|
status |= TxCRCEn; |
|
if (entry >= TX_RING_SIZE - skb_num_frags(skb)) { |
|
status |= TxRingWrap; |
|
wrap_ring = 1; |
|
} |
|
if (np->reap_tx) { |
|
status |= TxDescIntr; |
|
np->reap_tx = 0; |
|
} |
|
if (skb->ip_summed == CHECKSUM_PARTIAL) { |
|
status |= TxCalTCP; |
|
dev->stats.tx_compressed++; |
|
} |
|
status |= skb_first_frag_len(skb) | (skb_num_frags(skb) << 16); |
|
|
|
np->tx_info[entry].mapping = |
|
dma_map_single(&np->pci_dev->dev, skb->data, |
|
skb_first_frag_len(skb), |
|
DMA_TO_DEVICE); |
|
} else { |
|
const skb_frag_t *this_frag = &skb_shinfo(skb)->frags[i - 1]; |
|
status |= skb_frag_size(this_frag); |
|
np->tx_info[entry].mapping = |
|
dma_map_single(&np->pci_dev->dev, |
|
skb_frag_address(this_frag), |
|
skb_frag_size(this_frag), |
|
DMA_TO_DEVICE); |
|
} |
|
if (dma_mapping_error(&np->pci_dev->dev, np->tx_info[entry].mapping)) { |
|
dev->stats.tx_dropped++; |
|
goto err_out; |
|
} |
|
|
|
np->tx_ring[entry].addr = cpu_to_dma(np->tx_info[entry].mapping); |
|
np->tx_ring[entry].status = cpu_to_le32(status); |
|
if (debug > 3) |
|
printk(KERN_DEBUG "%s: Tx #%d/#%d slot %d status %#8.8x.\n", |
|
dev->name, np->cur_tx, np->dirty_tx, |
|
entry, status); |
|
if (wrap_ring) { |
|
np->tx_info[entry].used_slots = TX_RING_SIZE - entry; |
|
np->cur_tx += np->tx_info[entry].used_slots; |
|
entry = 0; |
|
} else { |
|
np->tx_info[entry].used_slots = 1; |
|
np->cur_tx += np->tx_info[entry].used_slots; |
|
entry++; |
|
} |
|
/* scavenge the tx descriptors twice per TX_RING_SIZE */ |
|
if (np->cur_tx % (TX_RING_SIZE / 2) == 0) |
|
np->reap_tx = 1; |
|
} |
|
|
|
/* Non-x86: explicitly flush descriptor cache lines here. */ |
|
/* Ensure all descriptors are written back before the transmit is |
|
initiated. - Jes */ |
|
wmb(); |
|
|
|
/* Update the producer index. */ |
|
writel(entry * (sizeof(starfire_tx_desc) / 8), np->base + TxProducerIdx); |
|
|
|
/* 4 is arbitrary, but should be ok */ |
|
if ((np->cur_tx - np->dirty_tx) + 4 > TX_RING_SIZE) |
|
netif_stop_queue(dev); |
|
|
|
return NETDEV_TX_OK; |
|
|
|
err_out: |
|
entry = prev_tx % TX_RING_SIZE; |
|
np->tx_info[entry].skb = NULL; |
|
if (i > 0) { |
|
dma_unmap_single(&np->pci_dev->dev, |
|
np->tx_info[entry].mapping, |
|
skb_first_frag_len(skb), DMA_TO_DEVICE); |
|
np->tx_info[entry].mapping = 0; |
|
entry = (entry + np->tx_info[entry].used_slots) % TX_RING_SIZE; |
|
for (j = 1; j < i; j++) { |
|
dma_unmap_single(&np->pci_dev->dev, |
|
np->tx_info[entry].mapping, |
|
skb_frag_size(&skb_shinfo(skb)->frags[j - 1]), |
|
DMA_TO_DEVICE); |
|
entry++; |
|
} |
|
} |
|
dev_kfree_skb_any(skb); |
|
np->cur_tx = prev_tx; |
|
return NETDEV_TX_OK; |
|
} |
|
|
|
/* The interrupt handler does all of the Rx thread work and cleans up |
|
after the Tx thread. */ |
|
static irqreturn_t intr_handler(int irq, void *dev_instance) |
|
{ |
|
struct net_device *dev = dev_instance; |
|
struct netdev_private *np = netdev_priv(dev); |
|
void __iomem *ioaddr = np->base; |
|
int boguscnt = max_interrupt_work; |
|
int consumer; |
|
int tx_status; |
|
int handled = 0; |
|
|
|
do { |
|
u32 intr_status = readl(ioaddr + IntrClear); |
|
|
|
if (debug > 4) |
|
printk(KERN_DEBUG "%s: Interrupt status %#8.8x.\n", |
|
dev->name, intr_status); |
|
|
|
if (intr_status == 0 || intr_status == (u32) -1) |
|
break; |
|
|
|
handled = 1; |
|
|
|
if (intr_status & (IntrRxDone | IntrRxEmpty)) { |
|
u32 enable; |
|
|
|
if (likely(napi_schedule_prep(&np->napi))) { |
|
__napi_schedule(&np->napi); |
|
enable = readl(ioaddr + IntrEnable); |
|
enable &= ~(IntrRxDone | IntrRxEmpty); |
|
writel(enable, ioaddr + IntrEnable); |
|
/* flush PCI posting buffers */ |
|
readl(ioaddr + IntrEnable); |
|
} else { |
|
/* Paranoia check */ |
|
enable = readl(ioaddr + IntrEnable); |
|
if (enable & (IntrRxDone | IntrRxEmpty)) { |
|
printk(KERN_INFO |
|
"%s: interrupt while in poll!\n", |
|
dev->name); |
|
enable &= ~(IntrRxDone | IntrRxEmpty); |
|
writel(enable, ioaddr + IntrEnable); |
|
} |
|
} |
|
} |
|
|
|
/* Scavenge the skbuff list based on the Tx-done queue. |
|
There are redundant checks here that may be cleaned up |
|
after the driver has proven to be reliable. */ |
|
consumer = readl(ioaddr + TxConsumerIdx); |
|
if (debug > 3) |
|
printk(KERN_DEBUG "%s: Tx Consumer index is %d.\n", |
|
dev->name, consumer); |
|
|
|
while ((tx_status = le32_to_cpu(np->tx_done_q[np->tx_done].status)) != 0) { |
|
if (debug > 3) |
|
printk(KERN_DEBUG "%s: Tx completion #%d entry %d is %#8.8x.\n", |
|
dev->name, np->dirty_tx, np->tx_done, tx_status); |
|
if ((tx_status & 0xe0000000) == 0xa0000000) { |
|
dev->stats.tx_packets++; |
|
} else if ((tx_status & 0xe0000000) == 0x80000000) { |
|
u16 entry = (tx_status & 0x7fff) / sizeof(starfire_tx_desc); |
|
struct sk_buff *skb = np->tx_info[entry].skb; |
|
np->tx_info[entry].skb = NULL; |
|
dma_unmap_single(&np->pci_dev->dev, |
|
np->tx_info[entry].mapping, |
|
skb_first_frag_len(skb), |
|
DMA_TO_DEVICE); |
|
np->tx_info[entry].mapping = 0; |
|
np->dirty_tx += np->tx_info[entry].used_slots; |
|
entry = (entry + np->tx_info[entry].used_slots) % TX_RING_SIZE; |
|
{ |
|
int i; |
|
for (i = 0; i < skb_shinfo(skb)->nr_frags; i++) { |
|
dma_unmap_single(&np->pci_dev->dev, |
|
np->tx_info[entry].mapping, |
|
skb_frag_size(&skb_shinfo(skb)->frags[i]), |
|
DMA_TO_DEVICE); |
|
np->dirty_tx++; |
|
entry++; |
|
} |
|
} |
|
|
|
dev_consume_skb_irq(skb); |
|
} |
|
np->tx_done_q[np->tx_done].status = 0; |
|
np->tx_done = (np->tx_done + 1) % DONE_Q_SIZE; |
|
} |
|
writew(np->tx_done, ioaddr + CompletionQConsumerIdx + 2); |
|
|
|
if (netif_queue_stopped(dev) && |
|
(np->cur_tx - np->dirty_tx + 4 < TX_RING_SIZE)) { |
|
/* The ring is no longer full, wake the queue. */ |
|
netif_wake_queue(dev); |
|
} |
|
|
|
/* Stats overflow */ |
|
if (intr_status & IntrStatsMax) |
|
get_stats(dev); |
|
|
|
/* Media change interrupt. */ |
|
if (intr_status & IntrLinkChange) |
|
netdev_media_change(dev); |
|
|
|
/* Abnormal error summary/uncommon events handlers. */ |
|
if (intr_status & IntrAbnormalSummary) |
|
netdev_error(dev, intr_status); |
|
|
|
if (--boguscnt < 0) { |
|
if (debug > 1) |
|
printk(KERN_WARNING "%s: Too much work at interrupt, " |
|
"status=%#8.8x.\n", |
|
dev->name, intr_status); |
|
break; |
|
} |
|
} while (1); |
|
|
|
if (debug > 4) |
|
printk(KERN_DEBUG "%s: exiting interrupt, status=%#8.8x.\n", |
|
dev->name, (int) readl(ioaddr + IntrStatus)); |
|
return IRQ_RETVAL(handled); |
|
} |
|
|
|
|
|
/* |
|
* This routine is logically part of the interrupt/poll handler, but separated |
|
* for clarity and better register allocation. |
|
*/ |
|
static int __netdev_rx(struct net_device *dev, int *quota) |
|
{ |
|
struct netdev_private *np = netdev_priv(dev); |
|
u32 desc_status; |
|
int retcode = 0; |
|
|
|
/* If EOP is set on the next entry, it's a new packet. Send it up. */ |
|
while ((desc_status = le32_to_cpu(np->rx_done_q[np->rx_done].status)) != 0) { |
|
struct sk_buff *skb; |
|
u16 pkt_len; |
|
int entry; |
|
rx_done_desc *desc = &np->rx_done_q[np->rx_done]; |
|
|
|
if (debug > 4) |
|
printk(KERN_DEBUG " netdev_rx() status of %d was %#8.8x.\n", np->rx_done, desc_status); |
|
if (!(desc_status & RxOK)) { |
|
/* There was an error. */ |
|
if (debug > 2) |
|
printk(KERN_DEBUG " netdev_rx() Rx error was %#8.8x.\n", desc_status); |
|
dev->stats.rx_errors++; |
|
if (desc_status & RxFIFOErr) |
|
dev->stats.rx_fifo_errors++; |
|
goto next_rx; |
|
} |
|
|
|
if (*quota <= 0) { /* out of rx quota */ |
|
retcode = 1; |
|
goto out; |
|
} |
|
(*quota)--; |
|
|
|
pkt_len = desc_status; /* Implicitly Truncate */ |
|
entry = (desc_status >> 16) & 0x7ff; |
|
|
|
if (debug > 4) |
|
printk(KERN_DEBUG " netdev_rx() normal Rx pkt length %d, quota %d.\n", pkt_len, *quota); |
|
/* Check if the packet is long enough to accept without copying |
|
to a minimally-sized skbuff. */ |
|
if (pkt_len < rx_copybreak && |
|
(skb = netdev_alloc_skb(dev, pkt_len + 2)) != NULL) { |
|
skb_reserve(skb, 2); /* 16 byte align the IP header */ |
|
dma_sync_single_for_cpu(&np->pci_dev->dev, |
|
np->rx_info[entry].mapping, |
|
pkt_len, DMA_FROM_DEVICE); |
|
skb_copy_to_linear_data(skb, np->rx_info[entry].skb->data, pkt_len); |
|
dma_sync_single_for_device(&np->pci_dev->dev, |
|
np->rx_info[entry].mapping, |
|
pkt_len, DMA_FROM_DEVICE); |
|
skb_put(skb, pkt_len); |
|
} else { |
|
dma_unmap_single(&np->pci_dev->dev, |
|
np->rx_info[entry].mapping, |
|
np->rx_buf_sz, DMA_FROM_DEVICE); |
|
skb = np->rx_info[entry].skb; |
|
skb_put(skb, pkt_len); |
|
np->rx_info[entry].skb = NULL; |
|
np->rx_info[entry].mapping = 0; |
|
} |
|
#ifndef final_version /* Remove after testing. */ |
|
/* You will want this info for the initial debug. */ |
|
if (debug > 5) { |
|
printk(KERN_DEBUG " Rx data %pM %pM %2.2x%2.2x.\n", |
|
skb->data, skb->data + 6, |
|
skb->data[12], skb->data[13]); |
|
} |
|
#endif |
|
|
|
skb->protocol = eth_type_trans(skb, dev); |
|
#ifdef VLAN_SUPPORT |
|
if (debug > 4) |
|
printk(KERN_DEBUG " netdev_rx() status2 of %d was %#4.4x.\n", np->rx_done, le16_to_cpu(desc->status2)); |
|
#endif |
|
if (le16_to_cpu(desc->status2) & 0x0100) { |
|
skb->ip_summed = CHECKSUM_UNNECESSARY; |
|
dev->stats.rx_compressed++; |
|
} |
|
/* |
|
* This feature doesn't seem to be working, at least |
|
* with the two firmware versions I have. If the GFP sees |
|
* an IP fragment, it either ignores it completely, or reports |
|
* "bad checksum" on it. |
|
* |
|
* Maybe I missed something -- corrections are welcome. |
|
* Until then, the printk stays. :-) -Ion |
|
*/ |
|
else if (le16_to_cpu(desc->status2) & 0x0040) { |
|
skb->ip_summed = CHECKSUM_COMPLETE; |
|
skb->csum = le16_to_cpu(desc->csum); |
|
printk(KERN_DEBUG "%s: checksum_hw, status2 = %#x\n", dev->name, le16_to_cpu(desc->status2)); |
|
} |
|
#ifdef VLAN_SUPPORT |
|
if (le16_to_cpu(desc->status2) & 0x0200) { |
|
u16 vlid = le16_to_cpu(desc->vlanid); |
|
|
|
if (debug > 4) { |
|
printk(KERN_DEBUG " netdev_rx() vlanid = %d\n", |
|
vlid); |
|
} |
|
__vlan_hwaccel_put_tag(skb, htons(ETH_P_8021Q), vlid); |
|
} |
|
#endif /* VLAN_SUPPORT */ |
|
netif_receive_skb(skb); |
|
dev->stats.rx_packets++; |
|
|
|
next_rx: |
|
np->cur_rx++; |
|
desc->status = 0; |
|
np->rx_done = (np->rx_done + 1) % DONE_Q_SIZE; |
|
} |
|
|
|
if (*quota == 0) { /* out of rx quota */ |
|
retcode = 1; |
|
goto out; |
|
} |
|
writew(np->rx_done, np->base + CompletionQConsumerIdx); |
|
|
|
out: |
|
refill_rx_ring(dev); |
|
if (debug > 5) |
|
printk(KERN_DEBUG " exiting netdev_rx(): %d, status of %d was %#8.8x.\n", |
|
retcode, np->rx_done, desc_status); |
|
return retcode; |
|
} |
|
|
|
static int netdev_poll(struct napi_struct *napi, int budget) |
|
{ |
|
struct netdev_private *np = container_of(napi, struct netdev_private, napi); |
|
struct net_device *dev = np->dev; |
|
u32 intr_status; |
|
void __iomem *ioaddr = np->base; |
|
int quota = budget; |
|
|
|
do { |
|
writel(IntrRxDone | IntrRxEmpty, ioaddr + IntrClear); |
|
|
|
if (__netdev_rx(dev, "a)) |
|
goto out; |
|
|
|
intr_status = readl(ioaddr + IntrStatus); |
|
} while (intr_status & (IntrRxDone | IntrRxEmpty)); |
|
|
|
napi_complete(napi); |
|
intr_status = readl(ioaddr + IntrEnable); |
|
intr_status |= IntrRxDone | IntrRxEmpty; |
|
writel(intr_status, ioaddr + IntrEnable); |
|
|
|
out: |
|
if (debug > 5) |
|
printk(KERN_DEBUG " exiting netdev_poll(): %d.\n", |
|
budget - quota); |
|
|
|
/* Restart Rx engine if stopped. */ |
|
return budget - quota; |
|
} |
|
|
|
static void refill_rx_ring(struct net_device *dev) |
|
{ |
|
struct netdev_private *np = netdev_priv(dev); |
|
struct sk_buff *skb; |
|
int entry = -1; |
|
|
|
/* Refill the Rx ring buffers. */ |
|
for (; np->cur_rx - np->dirty_rx > 0; np->dirty_rx++) { |
|
entry = np->dirty_rx % RX_RING_SIZE; |
|
if (np->rx_info[entry].skb == NULL) { |
|
skb = netdev_alloc_skb(dev, np->rx_buf_sz); |
|
np->rx_info[entry].skb = skb; |
|
if (skb == NULL) |
|
break; /* Better luck next round. */ |
|
np->rx_info[entry].mapping = |
|
dma_map_single(&np->pci_dev->dev, skb->data, |
|
np->rx_buf_sz, DMA_FROM_DEVICE); |
|
if (dma_mapping_error(&np->pci_dev->dev, np->rx_info[entry].mapping)) { |
|
dev_kfree_skb(skb); |
|
np->rx_info[entry].skb = NULL; |
|
break; |
|
} |
|
np->rx_ring[entry].rxaddr = |
|
cpu_to_dma(np->rx_info[entry].mapping | RxDescValid); |
|
} |
|
if (entry == RX_RING_SIZE - 1) |
|
np->rx_ring[entry].rxaddr |= cpu_to_dma(RxDescEndRing); |
|
} |
|
if (entry >= 0) |
|
writew(entry, np->base + RxDescQIdx); |
|
} |
|
|
|
|
|
static void netdev_media_change(struct net_device *dev) |
|
{ |
|
struct netdev_private *np = netdev_priv(dev); |
|
void __iomem *ioaddr = np->base; |
|
u16 reg0, reg1, reg4, reg5; |
|
u32 new_tx_mode; |
|
u32 new_intr_timer_ctrl; |
|
|
|
/* reset status first */ |
|
mdio_read(dev, np->phys[0], MII_BMCR); |
|
mdio_read(dev, np->phys[0], MII_BMSR); |
|
|
|
reg0 = mdio_read(dev, np->phys[0], MII_BMCR); |
|
reg1 = mdio_read(dev, np->phys[0], MII_BMSR); |
|
|
|
if (reg1 & BMSR_LSTATUS) { |
|
/* link is up */ |
|
if (reg0 & BMCR_ANENABLE) { |
|
/* autonegotiation is enabled */ |
|
reg4 = mdio_read(dev, np->phys[0], MII_ADVERTISE); |
|
reg5 = mdio_read(dev, np->phys[0], MII_LPA); |
|
if (reg4 & ADVERTISE_100FULL && reg5 & LPA_100FULL) { |
|
np->speed100 = 1; |
|
np->mii_if.full_duplex = 1; |
|
} else if (reg4 & ADVERTISE_100HALF && reg5 & LPA_100HALF) { |
|
np->speed100 = 1; |
|
np->mii_if.full_duplex = 0; |
|
} else if (reg4 & ADVERTISE_10FULL && reg5 & LPA_10FULL) { |
|
np->speed100 = 0; |
|
np->mii_if.full_duplex = 1; |
|
} else { |
|
np->speed100 = 0; |
|
np->mii_if.full_duplex = 0; |
|
} |
|
} else { |
|
/* autonegotiation is disabled */ |
|
if (reg0 & BMCR_SPEED100) |
|
np->speed100 = 1; |
|
else |
|
np->speed100 = 0; |
|
if (reg0 & BMCR_FULLDPLX) |
|
np->mii_if.full_duplex = 1; |
|
else |
|
np->mii_if.full_duplex = 0; |
|
} |
|
netif_carrier_on(dev); |
|
printk(KERN_DEBUG "%s: Link is up, running at %sMbit %s-duplex\n", |
|
dev->name, |
|
np->speed100 ? "100" : "10", |
|
np->mii_if.full_duplex ? "full" : "half"); |
|
|
|
new_tx_mode = np->tx_mode & ~FullDuplex; /* duplex setting */ |
|
if (np->mii_if.full_duplex) |
|
new_tx_mode |= FullDuplex; |
|
if (np->tx_mode != new_tx_mode) { |
|
np->tx_mode = new_tx_mode; |
|
writel(np->tx_mode | MiiSoftReset, ioaddr + TxMode); |
|
udelay(1000); |
|
writel(np->tx_mode, ioaddr + TxMode); |
|
} |
|
|
|
new_intr_timer_ctrl = np->intr_timer_ctrl & ~Timer10X; |
|
if (np->speed100) |
|
new_intr_timer_ctrl |= Timer10X; |
|
if (np->intr_timer_ctrl != new_intr_timer_ctrl) { |
|
np->intr_timer_ctrl = new_intr_timer_ctrl; |
|
writel(new_intr_timer_ctrl, ioaddr + IntrTimerCtrl); |
|
} |
|
} else { |
|
netif_carrier_off(dev); |
|
printk(KERN_DEBUG "%s: Link is down\n", dev->name); |
|
} |
|
} |
|
|
|
|
|
static void netdev_error(struct net_device *dev, int intr_status) |
|
{ |
|
struct netdev_private *np = netdev_priv(dev); |
|
|
|
/* Came close to underrunning the Tx FIFO, increase threshold. */ |
|
if (intr_status & IntrTxDataLow) { |
|
if (np->tx_threshold <= PKT_BUF_SZ / 16) { |
|
writel(++np->tx_threshold, np->base + TxThreshold); |
|
printk(KERN_NOTICE "%s: PCI bus congestion, increasing Tx FIFO threshold to %d bytes\n", |
|
dev->name, np->tx_threshold * 16); |
|
} else |
|
printk(KERN_WARNING "%s: PCI Tx underflow -- adapter is probably malfunctioning\n", dev->name); |
|
} |
|
if (intr_status & IntrRxGFPDead) { |
|
dev->stats.rx_fifo_errors++; |
|
dev->stats.rx_errors++; |
|
} |
|
if (intr_status & (IntrNoTxCsum | IntrDMAErr)) { |
|
dev->stats.tx_fifo_errors++; |
|
dev->stats.tx_errors++; |
|
} |
|
if ((intr_status & ~(IntrNormalMask | IntrAbnormalSummary | IntrLinkChange | IntrStatsMax | IntrTxDataLow | IntrRxGFPDead | IntrNoTxCsum | IntrPCIPad)) && debug) |
|
printk(KERN_ERR "%s: Something Wicked happened! %#8.8x.\n", |
|
dev->name, intr_status); |
|
} |
|
|
|
|
|
static struct net_device_stats *get_stats(struct net_device *dev) |
|
{ |
|
struct netdev_private *np = netdev_priv(dev); |
|
void __iomem *ioaddr = np->base; |
|
|
|
/* This adapter architecture needs no SMP locks. */ |
|
dev->stats.tx_bytes = readl(ioaddr + 0x57010); |
|
dev->stats.rx_bytes = readl(ioaddr + 0x57044); |
|
dev->stats.tx_packets = readl(ioaddr + 0x57000); |
|
dev->stats.tx_aborted_errors = |
|
readl(ioaddr + 0x57024) + readl(ioaddr + 0x57028); |
|
dev->stats.tx_window_errors = readl(ioaddr + 0x57018); |
|
dev->stats.collisions = |
|
readl(ioaddr + 0x57004) + readl(ioaddr + 0x57008); |
|
|
|
/* The chip only need report frame silently dropped. */ |
|
dev->stats.rx_dropped += readw(ioaddr + RxDMAStatus); |
|
writew(0, ioaddr + RxDMAStatus); |
|
dev->stats.rx_crc_errors = readl(ioaddr + 0x5703C); |
|
dev->stats.rx_frame_errors = readl(ioaddr + 0x57040); |
|
dev->stats.rx_length_errors = readl(ioaddr + 0x57058); |
|
dev->stats.rx_missed_errors = readl(ioaddr + 0x5707C); |
|
|
|
return &dev->stats; |
|
} |
|
|
|
#ifdef VLAN_SUPPORT |
|
static u32 set_vlan_mode(struct netdev_private *np) |
|
{ |
|
u32 ret = VlanMode; |
|
u16 vid; |
|
void __iomem *filter_addr = np->base + HashTable + 8; |
|
int vlan_count = 0; |
|
|
|
for_each_set_bit(vid, np->active_vlans, VLAN_N_VID) { |
|
if (vlan_count == 32) |
|
break; |
|
writew(vid, filter_addr); |
|
filter_addr += 16; |
|
vlan_count++; |
|
} |
|
if (vlan_count == 32) { |
|
ret |= PerfectFilterVlan; |
|
while (vlan_count < 32) { |
|
writew(0, filter_addr); |
|
filter_addr += 16; |
|
vlan_count++; |
|
} |
|
} |
|
return ret; |
|
} |
|
#endif /* VLAN_SUPPORT */ |
|
|
|
static void set_rx_mode(struct net_device *dev) |
|
{ |
|
struct netdev_private *np = netdev_priv(dev); |
|
void __iomem *ioaddr = np->base; |
|
u32 rx_mode = MinVLANPrio; |
|
struct netdev_hw_addr *ha; |
|
int i; |
|
|
|
#ifdef VLAN_SUPPORT |
|
rx_mode |= set_vlan_mode(np); |
|
#endif /* VLAN_SUPPORT */ |
|
|
|
if (dev->flags & IFF_PROMISC) { /* Set promiscuous. */ |
|
rx_mode |= AcceptAll; |
|
} else if ((netdev_mc_count(dev) > multicast_filter_limit) || |
|
(dev->flags & IFF_ALLMULTI)) { |
|
/* Too many to match, or accept all multicasts. */ |
|
rx_mode |= AcceptBroadcast|AcceptAllMulticast|PerfectFilter; |
|
} else if (netdev_mc_count(dev) <= 14) { |
|
/* Use the 16 element perfect filter, skip first two entries. */ |
|
void __iomem *filter_addr = ioaddr + PerfFilterTable + 2 * 16; |
|
__be16 *eaddrs; |
|
netdev_for_each_mc_addr(ha, dev) { |
|
eaddrs = (__be16 *) ha->addr; |
|
writew(be16_to_cpu(eaddrs[2]), filter_addr); filter_addr += 4; |
|
writew(be16_to_cpu(eaddrs[1]), filter_addr); filter_addr += 4; |
|
writew(be16_to_cpu(eaddrs[0]), filter_addr); filter_addr += 8; |
|
} |
|
eaddrs = (__be16 *)dev->dev_addr; |
|
i = netdev_mc_count(dev) + 2; |
|
while (i++ < 16) { |
|
writew(be16_to_cpu(eaddrs[0]), filter_addr); filter_addr += 4; |
|
writew(be16_to_cpu(eaddrs[1]), filter_addr); filter_addr += 4; |
|
writew(be16_to_cpu(eaddrs[2]), filter_addr); filter_addr += 8; |
|
} |
|
rx_mode |= AcceptBroadcast|PerfectFilter; |
|
} else { |
|
/* Must use a multicast hash table. */ |
|
void __iomem *filter_addr; |
|
__be16 *eaddrs; |
|
__le16 mc_filter[32] __attribute__ ((aligned(sizeof(long)))); /* Multicast hash filter */ |
|
|
|
memset(mc_filter, 0, sizeof(mc_filter)); |
|
netdev_for_each_mc_addr(ha, dev) { |
|
/* The chip uses the upper 9 CRC bits |
|
as index into the hash table */ |
|
int bit_nr = ether_crc_le(ETH_ALEN, ha->addr) >> 23; |
|
__le32 *fptr = (__le32 *) &mc_filter[(bit_nr >> 4) & ~1]; |
|
|
|
*fptr |= cpu_to_le32(1 << (bit_nr & 31)); |
|
} |
|
/* Clear the perfect filter list, skip first two entries. */ |
|
filter_addr = ioaddr + PerfFilterTable + 2 * 16; |
|
eaddrs = (__be16 *)dev->dev_addr; |
|
for (i = 2; i < 16; i++) { |
|
writew(be16_to_cpu(eaddrs[0]), filter_addr); filter_addr += 4; |
|
writew(be16_to_cpu(eaddrs[1]), filter_addr); filter_addr += 4; |
|
writew(be16_to_cpu(eaddrs[2]), filter_addr); filter_addr += 8; |
|
} |
|
for (filter_addr = ioaddr + HashTable, i = 0; i < 32; filter_addr+= 16, i++) |
|
writew(mc_filter[i], filter_addr); |
|
rx_mode |= AcceptBroadcast|PerfectFilter|HashFilter; |
|
} |
|
writel(rx_mode, ioaddr + RxFilterMode); |
|
} |
|
|
|
static int check_if_running(struct net_device *dev) |
|
{ |
|
if (!netif_running(dev)) |
|
return -EINVAL; |
|
return 0; |
|
} |
|
|
|
static void get_drvinfo(struct net_device *dev, struct ethtool_drvinfo *info) |
|
{ |
|
struct netdev_private *np = netdev_priv(dev); |
|
strlcpy(info->driver, DRV_NAME, sizeof(info->driver)); |
|
strlcpy(info->bus_info, pci_name(np->pci_dev), sizeof(info->bus_info)); |
|
} |
|
|
|
static int get_link_ksettings(struct net_device *dev, |
|
struct ethtool_link_ksettings *cmd) |
|
{ |
|
struct netdev_private *np = netdev_priv(dev); |
|
spin_lock_irq(&np->lock); |
|
mii_ethtool_get_link_ksettings(&np->mii_if, cmd); |
|
spin_unlock_irq(&np->lock); |
|
return 0; |
|
} |
|
|
|
static int set_link_ksettings(struct net_device *dev, |
|
const struct ethtool_link_ksettings *cmd) |
|
{ |
|
struct netdev_private *np = netdev_priv(dev); |
|
int res; |
|
spin_lock_irq(&np->lock); |
|
res = mii_ethtool_set_link_ksettings(&np->mii_if, cmd); |
|
spin_unlock_irq(&np->lock); |
|
check_duplex(dev); |
|
return res; |
|
} |
|
|
|
static int nway_reset(struct net_device *dev) |
|
{ |
|
struct netdev_private *np = netdev_priv(dev); |
|
return mii_nway_restart(&np->mii_if); |
|
} |
|
|
|
static u32 get_link(struct net_device *dev) |
|
{ |
|
struct netdev_private *np = netdev_priv(dev); |
|
return mii_link_ok(&np->mii_if); |
|
} |
|
|
|
static u32 get_msglevel(struct net_device *dev) |
|
{ |
|
return debug; |
|
} |
|
|
|
static void set_msglevel(struct net_device *dev, u32 val) |
|
{ |
|
debug = val; |
|
} |
|
|
|
static const struct ethtool_ops ethtool_ops = { |
|
.begin = check_if_running, |
|
.get_drvinfo = get_drvinfo, |
|
.nway_reset = nway_reset, |
|
.get_link = get_link, |
|
.get_msglevel = get_msglevel, |
|
.set_msglevel = set_msglevel, |
|
.get_link_ksettings = get_link_ksettings, |
|
.set_link_ksettings = set_link_ksettings, |
|
}; |
|
|
|
static int netdev_ioctl(struct net_device *dev, struct ifreq *rq, int cmd) |
|
{ |
|
struct netdev_private *np = netdev_priv(dev); |
|
struct mii_ioctl_data *data = if_mii(rq); |
|
int rc; |
|
|
|
if (!netif_running(dev)) |
|
return -EINVAL; |
|
|
|
spin_lock_irq(&np->lock); |
|
rc = generic_mii_ioctl(&np->mii_if, data, cmd, NULL); |
|
spin_unlock_irq(&np->lock); |
|
|
|
if ((cmd == SIOCSMIIREG) && (data->phy_id == np->phys[0])) |
|
check_duplex(dev); |
|
|
|
return rc; |
|
} |
|
|
|
static int netdev_close(struct net_device *dev) |
|
{ |
|
struct netdev_private *np = netdev_priv(dev); |
|
void __iomem *ioaddr = np->base; |
|
int i; |
|
|
|
netif_stop_queue(dev); |
|
|
|
napi_disable(&np->napi); |
|
|
|
if (debug > 1) { |
|
printk(KERN_DEBUG "%s: Shutting down ethercard, Intr status %#8.8x.\n", |
|
dev->name, (int) readl(ioaddr + IntrStatus)); |
|
printk(KERN_DEBUG "%s: Queue pointers were Tx %d / %d, Rx %d / %d.\n", |
|
dev->name, np->cur_tx, np->dirty_tx, |
|
np->cur_rx, np->dirty_rx); |
|
} |
|
|
|
/* Disable interrupts by clearing the interrupt mask. */ |
|
writel(0, ioaddr + IntrEnable); |
|
|
|
/* Stop the chip's Tx and Rx processes. */ |
|
writel(0, ioaddr + GenCtrl); |
|
readl(ioaddr + GenCtrl); |
|
|
|
if (debug > 5) { |
|
printk(KERN_DEBUG" Tx ring at %#llx:\n", |
|
(long long) np->tx_ring_dma); |
|
for (i = 0; i < 8 /* TX_RING_SIZE is huge! */; i++) |
|
printk(KERN_DEBUG " #%d desc. %#8.8x %#llx -> %#8.8x.\n", |
|
i, le32_to_cpu(np->tx_ring[i].status), |
|
(long long) dma_to_cpu(np->tx_ring[i].addr), |
|
le32_to_cpu(np->tx_done_q[i].status)); |
|
printk(KERN_DEBUG " Rx ring at %#llx -> %p:\n", |
|
(long long) np->rx_ring_dma, np->rx_done_q); |
|
if (np->rx_done_q) |
|
for (i = 0; i < 8 /* RX_RING_SIZE */; i++) { |
|
printk(KERN_DEBUG " #%d desc. %#llx -> %#8.8x\n", |
|
i, (long long) dma_to_cpu(np->rx_ring[i].rxaddr), le32_to_cpu(np->rx_done_q[i].status)); |
|
} |
|
} |
|
|
|
free_irq(np->pci_dev->irq, dev); |
|
|
|
/* Free all the skbuffs in the Rx queue. */ |
|
for (i = 0; i < RX_RING_SIZE; i++) { |
|
np->rx_ring[i].rxaddr = cpu_to_dma(0xBADF00D0); /* An invalid address. */ |
|
if (np->rx_info[i].skb != NULL) { |
|
dma_unmap_single(&np->pci_dev->dev, |
|
np->rx_info[i].mapping, |
|
np->rx_buf_sz, DMA_FROM_DEVICE); |
|
dev_kfree_skb(np->rx_info[i].skb); |
|
} |
|
np->rx_info[i].skb = NULL; |
|
np->rx_info[i].mapping = 0; |
|
} |
|
for (i = 0; i < TX_RING_SIZE; i++) { |
|
struct sk_buff *skb = np->tx_info[i].skb; |
|
if (skb == NULL) |
|
continue; |
|
dma_unmap_single(&np->pci_dev->dev, np->tx_info[i].mapping, |
|
skb_first_frag_len(skb), DMA_TO_DEVICE); |
|
np->tx_info[i].mapping = 0; |
|
dev_kfree_skb(skb); |
|
np->tx_info[i].skb = NULL; |
|
} |
|
|
|
return 0; |
|
} |
|
|
|
static int __maybe_unused starfire_suspend(struct device *dev_d) |
|
{ |
|
struct net_device *dev = dev_get_drvdata(dev_d); |
|
|
|
if (netif_running(dev)) { |
|
netif_device_detach(dev); |
|
netdev_close(dev); |
|
} |
|
|
|
return 0; |
|
} |
|
|
|
static int __maybe_unused starfire_resume(struct device *dev_d) |
|
{ |
|
struct net_device *dev = dev_get_drvdata(dev_d); |
|
|
|
if (netif_running(dev)) { |
|
netdev_open(dev); |
|
netif_device_attach(dev); |
|
} |
|
|
|
return 0; |
|
} |
|
|
|
static void starfire_remove_one(struct pci_dev *pdev) |
|
{ |
|
struct net_device *dev = pci_get_drvdata(pdev); |
|
struct netdev_private *np = netdev_priv(dev); |
|
|
|
BUG_ON(!dev); |
|
|
|
unregister_netdev(dev); |
|
|
|
if (np->queue_mem) |
|
dma_free_coherent(&pdev->dev, np->queue_mem_size, |
|
np->queue_mem, np->queue_mem_dma); |
|
|
|
|
|
/* XXX: add wakeup code -- requires firmware for MagicPacket */ |
|
pci_set_power_state(pdev, PCI_D3hot); /* go to sleep in D3 mode */ |
|
pci_disable_device(pdev); |
|
|
|
iounmap(np->base); |
|
pci_release_regions(pdev); |
|
|
|
free_netdev(dev); /* Will also free np!! */ |
|
} |
|
|
|
static SIMPLE_DEV_PM_OPS(starfire_pm_ops, starfire_suspend, starfire_resume); |
|
|
|
static struct pci_driver starfire_driver = { |
|
.name = DRV_NAME, |
|
.probe = starfire_init_one, |
|
.remove = starfire_remove_one, |
|
.driver.pm = &starfire_pm_ops, |
|
.id_table = starfire_pci_tbl, |
|
}; |
|
|
|
|
|
static int __init starfire_init (void) |
|
{ |
|
/* when a module, this is printed whether or not devices are found in probe */ |
|
#ifdef MODULE |
|
printk(KERN_INFO DRV_NAME ": polling (NAPI) enabled\n"); |
|
#endif |
|
|
|
BUILD_BUG_ON(sizeof(dma_addr_t) != sizeof(netdrv_addr_t)); |
|
|
|
return pci_register_driver(&starfire_driver); |
|
} |
|
|
|
|
|
static void __exit starfire_cleanup (void) |
|
{ |
|
pci_unregister_driver (&starfire_driver); |
|
} |
|
|
|
|
|
module_init(starfire_init); |
|
module_exit(starfire_cleanup);
|
|
|