mirror of https://github.com/Qortal/Brooklyn
You can not select more than 25 topics
Topics must start with a letter or number, can include dashes ('-') and can be up to 35 characters long.
1459 lines
39 KiB
1459 lines
39 KiB
# SPDX-License-Identifier: GPL-2.0-only |
|
# |
|
# Multimedia Video device configuration |
|
# |
|
|
|
if VIDEO_V4L2 |
|
|
|
comment "IR I2C driver auto-selected by 'Autoselect ancillary drivers'" |
|
depends on MEDIA_SUBDRV_AUTOSELECT && I2C && RC_CORE |
|
|
|
config VIDEO_IR_I2C |
|
tristate "I2C module for IR" if !MEDIA_SUBDRV_AUTOSELECT || EXPERT |
|
depends on I2C && RC_CORE |
|
default y |
|
help |
|
Most boards have an IR chip directly connected via GPIO. However, |
|
some video boards have the IR connected via I2C bus. |
|
|
|
If your board doesn't have an I2C IR chip, you may disable this |
|
option. |
|
|
|
In doubt, say Y. |
|
|
|
# |
|
# V4L2 I2C drivers that aren't related with Camera support |
|
# |
|
|
|
comment "audio, video and radio I2C drivers auto-selected by 'Autoselect ancillary drivers'" |
|
depends on MEDIA_HIDE_ANCILLARY_SUBDRV |
|
# |
|
# Encoder / Decoder module configuration |
|
# |
|
|
|
menu "Audio decoders, processors and mixers" |
|
visible if !MEDIA_HIDE_ANCILLARY_SUBDRV |
|
|
|
config VIDEO_TVAUDIO |
|
tristate "Simple audio decoder chips" |
|
depends on VIDEO_V4L2 && I2C |
|
help |
|
Support for several audio decoder chips found on some bt8xx boards: |
|
Philips: tda9840, tda9873h, tda9874h/a, tda9850, tda985x, tea6300, |
|
tea6320, tea6420, tda8425, ta8874z. |
|
Microchip: pic16c54 based design on ProVideo PV951 board. |
|
|
|
To compile this driver as a module, choose M here: the |
|
module will be called tvaudio. |
|
|
|
config VIDEO_TDA7432 |
|
tristate "Philips TDA7432 audio processor" |
|
depends on VIDEO_V4L2 && I2C |
|
help |
|
Support for tda7432 audio decoder chip found on some bt8xx boards. |
|
|
|
To compile this driver as a module, choose M here: the |
|
module will be called tda7432. |
|
|
|
config VIDEO_TDA9840 |
|
tristate "Philips TDA9840 audio processor" |
|
depends on I2C |
|
help |
|
Support for tda9840 audio decoder chip found on some Zoran boards. |
|
|
|
To compile this driver as a module, choose M here: the |
|
module will be called tda9840. |
|
|
|
config VIDEO_TDA1997X |
|
tristate "NXP TDA1997x HDMI receiver" |
|
depends on VIDEO_V4L2 && I2C |
|
depends on SND_SOC |
|
select HDMI |
|
select SND_PCM |
|
select V4L2_FWNODE |
|
select MEDIA_CONTROLLER |
|
select VIDEO_V4L2_SUBDEV_API |
|
help |
|
V4L2 subdevice driver for the NXP TDA1997x HDMI receivers. |
|
|
|
To compile this driver as a module, choose M here: the |
|
module will be called tda1997x. |
|
|
|
config VIDEO_TEA6415C |
|
tristate "Philips TEA6415C audio processor" |
|
depends on I2C |
|
help |
|
Support for tea6415c audio decoder chip found on some bt8xx boards. |
|
|
|
To compile this driver as a module, choose M here: the |
|
module will be called tea6415c. |
|
|
|
config VIDEO_TEA6420 |
|
tristate "Philips TEA6420 audio processor" |
|
depends on I2C |
|
help |
|
Support for tea6420 audio decoder chip found on some bt8xx boards. |
|
|
|
To compile this driver as a module, choose M here: the |
|
module will be called tea6420. |
|
|
|
config VIDEO_MSP3400 |
|
tristate "Micronas MSP34xx audio decoders" |
|
depends on VIDEO_V4L2 && I2C |
|
help |
|
Support for the Micronas MSP34xx series of audio decoders. |
|
|
|
To compile this driver as a module, choose M here: the |
|
module will be called msp3400. |
|
|
|
config VIDEO_CS3308 |
|
tristate "Cirrus Logic CS3308 audio ADC" |
|
depends on VIDEO_V4L2 && I2C |
|
help |
|
Support for the Cirrus Logic CS3308 High Performance 8-Channel |
|
Analog Volume Control |
|
|
|
To compile this driver as a module, choose M here: the |
|
module will be called cs3308. |
|
|
|
config VIDEO_CS5345 |
|
tristate "Cirrus Logic CS5345 audio ADC" |
|
depends on VIDEO_V4L2 && I2C |
|
help |
|
Support for the Cirrus Logic CS5345 24-bit, 192 kHz |
|
stereo A/D converter. |
|
|
|
To compile this driver as a module, choose M here: the |
|
module will be called cs5345. |
|
|
|
config VIDEO_CS53L32A |
|
tristate "Cirrus Logic CS53L32A audio ADC" |
|
depends on VIDEO_V4L2 && I2C |
|
help |
|
Support for the Cirrus Logic CS53L32A low voltage |
|
stereo A/D converter. |
|
|
|
To compile this driver as a module, choose M here: the |
|
module will be called cs53l32a. |
|
|
|
config VIDEO_TLV320AIC23B |
|
tristate "Texas Instruments TLV320AIC23B audio codec" |
|
depends on VIDEO_V4L2 && I2C |
|
help |
|
Support for the Texas Instruments TLV320AIC23B audio codec. |
|
|
|
To compile this driver as a module, choose M here: the |
|
module will be called tlv320aic23b. |
|
|
|
config VIDEO_UDA1342 |
|
tristate "Philips UDA1342 audio codec" |
|
depends on VIDEO_V4L2 && I2C |
|
help |
|
Support for the Philips UDA1342 audio codec. |
|
|
|
To compile this driver as a module, choose M here: the |
|
module will be called uda1342. |
|
|
|
config VIDEO_WM8775 |
|
tristate "Wolfson Microelectronics WM8775 audio ADC with input mixer" |
|
depends on VIDEO_V4L2 && I2C |
|
help |
|
Support for the Wolfson Microelectronics WM8775 high |
|
performance stereo A/D Converter with a 4 channel input mixer. |
|
|
|
To compile this driver as a module, choose M here: the |
|
module will be called wm8775. |
|
|
|
config VIDEO_WM8739 |
|
tristate "Wolfson Microelectronics WM8739 stereo audio ADC" |
|
depends on VIDEO_V4L2 && I2C |
|
help |
|
Support for the Wolfson Microelectronics WM8739 |
|
stereo A/D Converter. |
|
|
|
To compile this driver as a module, choose M here: the |
|
module will be called wm8739. |
|
|
|
config VIDEO_VP27SMPX |
|
tristate "Panasonic VP27's internal MPX" |
|
depends on VIDEO_V4L2 && I2C |
|
help |
|
Support for the internal MPX of the Panasonic VP27s tuner. |
|
|
|
To compile this driver as a module, choose M here: the |
|
module will be called vp27smpx. |
|
|
|
config VIDEO_SONY_BTF_MPX |
|
tristate "Sony BTF's internal MPX" |
|
depends on VIDEO_V4L2 && I2C |
|
help |
|
Support for the internal MPX of the Sony BTF-PG472Z tuner. |
|
|
|
To compile this driver as a module, choose M here: the |
|
module will be called sony-btf-mpx. |
|
endmenu |
|
|
|
menu "RDS decoders" |
|
visible if !MEDIA_HIDE_ANCILLARY_SUBDRV |
|
|
|
config VIDEO_SAA6588 |
|
tristate "SAA6588 Radio Chip RDS decoder support" |
|
depends on VIDEO_V4L2 && I2C |
|
|
|
help |
|
Support for this Radio Data System (RDS) decoder. This allows |
|
seeing radio station identification transmitted using this |
|
standard. |
|
|
|
To compile this driver as a module, choose M here: the |
|
module will be called saa6588. |
|
endmenu |
|
|
|
menu "Video decoders" |
|
visible if !MEDIA_HIDE_ANCILLARY_SUBDRV |
|
|
|
config VIDEO_ADV7180 |
|
tristate "Analog Devices ADV7180 decoder" |
|
depends on GPIOLIB && VIDEO_V4L2 && I2C |
|
select MEDIA_CONTROLLER |
|
select VIDEO_V4L2_SUBDEV_API |
|
help |
|
Support for the Analog Devices ADV7180 video decoder. |
|
|
|
To compile this driver as a module, choose M here: the |
|
module will be called adv7180. |
|
|
|
config VIDEO_ADV7183 |
|
tristate "Analog Devices ADV7183 decoder" |
|
depends on VIDEO_V4L2 && I2C |
|
help |
|
V4l2 subdevice driver for the Analog Devices |
|
ADV7183 video decoder. |
|
|
|
To compile this driver as a module, choose M here: the |
|
module will be called adv7183. |
|
|
|
config VIDEO_ADV748X |
|
tristate "Analog Devices ADV748x decoder" |
|
depends on VIDEO_V4L2 && I2C |
|
depends on OF |
|
select MEDIA_CONTROLLER |
|
select VIDEO_V4L2_SUBDEV_API |
|
select REGMAP_I2C |
|
select V4L2_FWNODE |
|
help |
|
V4L2 subdevice driver for the Analog Devices |
|
ADV7481 and ADV7482 HDMI/Analog video decoders. |
|
|
|
To compile this driver as a module, choose M here: the |
|
module will be called adv748x. |
|
|
|
config VIDEO_ADV7604 |
|
tristate "Analog Devices ADV7604 decoder" |
|
depends on VIDEO_V4L2 && I2C |
|
depends on GPIOLIB || COMPILE_TEST |
|
select MEDIA_CONTROLLER |
|
select VIDEO_V4L2_SUBDEV_API |
|
select REGMAP_I2C |
|
select HDMI |
|
select V4L2_FWNODE |
|
help |
|
Support for the Analog Devices ADV7604 video decoder. |
|
|
|
This is a Analog Devices Component/Graphics Digitizer |
|
with 4:1 Multiplexed HDMI Receiver. |
|
|
|
To compile this driver as a module, choose M here: the |
|
module will be called adv7604. |
|
|
|
config VIDEO_ADV7604_CEC |
|
bool "Enable Analog Devices ADV7604 CEC support" |
|
depends on VIDEO_ADV7604 |
|
select CEC_CORE |
|
help |
|
When selected the adv7604 will support the optional |
|
HDMI CEC feature. |
|
|
|
config VIDEO_ADV7842 |
|
tristate "Analog Devices ADV7842 decoder" |
|
depends on VIDEO_V4L2 && I2C |
|
select MEDIA_CONTROLLER |
|
select VIDEO_V4L2_SUBDEV_API |
|
select HDMI |
|
help |
|
Support for the Analog Devices ADV7842 video decoder. |
|
|
|
This is a Analog Devices Component/Graphics/SD Digitizer |
|
with 2:1 Multiplexed HDMI Receiver. |
|
|
|
To compile this driver as a module, choose M here: the |
|
module will be called adv7842. |
|
|
|
config VIDEO_ADV7842_CEC |
|
bool "Enable Analog Devices ADV7842 CEC support" |
|
depends on VIDEO_ADV7842 |
|
select CEC_CORE |
|
help |
|
When selected the adv7842 will support the optional |
|
HDMI CEC feature. |
|
|
|
config VIDEO_BT819 |
|
tristate "BT819A VideoStream decoder" |
|
depends on VIDEO_V4L2 && I2C |
|
help |
|
Support for BT819A video decoder. |
|
|
|
To compile this driver as a module, choose M here: the |
|
module will be called bt819. |
|
|
|
config VIDEO_BT856 |
|
tristate "BT856 VideoStream decoder" |
|
depends on VIDEO_V4L2 && I2C |
|
help |
|
Support for BT856 video decoder. |
|
|
|
To compile this driver as a module, choose M here: the |
|
module will be called bt856. |
|
|
|
config VIDEO_BT866 |
|
tristate "BT866 VideoStream decoder" |
|
depends on VIDEO_V4L2 && I2C |
|
help |
|
Support for BT866 video decoder. |
|
|
|
To compile this driver as a module, choose M here: the |
|
module will be called bt866. |
|
|
|
config VIDEO_KS0127 |
|
tristate "KS0127 video decoder" |
|
depends on VIDEO_V4L2 && I2C |
|
help |
|
Support for KS0127 video decoder. |
|
|
|
This chip is used on AverMedia AVS6EYES Zoran-based MJPEG |
|
cards. |
|
|
|
To compile this driver as a module, choose M here: the |
|
module will be called ks0127. |
|
|
|
config VIDEO_ML86V7667 |
|
tristate "OKI ML86V7667 video decoder" |
|
depends on VIDEO_V4L2 && I2C |
|
help |
|
Support for the OKI Semiconductor ML86V7667 video decoder. |
|
|
|
To compile this driver as a module, choose M here: the |
|
module will be called ml86v7667. |
|
|
|
config VIDEO_SAA7110 |
|
tristate "Philips SAA7110 video decoder" |
|
depends on VIDEO_V4L2 && I2C |
|
help |
|
Support for the Philips SAA7110 video decoders. |
|
|
|
To compile this driver as a module, choose M here: the |
|
module will be called saa7110. |
|
|
|
config VIDEO_SAA711X |
|
tristate "Philips SAA7111/3/4/5 video decoders" |
|
depends on VIDEO_V4L2 && I2C |
|
help |
|
Support for the Philips SAA7111/3/4/5 video decoders. |
|
|
|
To compile this driver as a module, choose M here: the |
|
module will be called saa7115. |
|
|
|
config VIDEO_TC358743 |
|
tristate "Toshiba TC358743 decoder" |
|
depends on VIDEO_V4L2 && I2C |
|
select MEDIA_CONTROLLER |
|
select VIDEO_V4L2_SUBDEV_API |
|
select HDMI |
|
select V4L2_FWNODE |
|
help |
|
Support for the Toshiba TC358743 HDMI to MIPI CSI-2 bridge. |
|
|
|
To compile this driver as a module, choose M here: the |
|
module will be called tc358743. |
|
|
|
config VIDEO_TC358743_CEC |
|
bool "Enable Toshiba TC358743 CEC support" |
|
depends on VIDEO_TC358743 |
|
select CEC_CORE |
|
help |
|
When selected the tc358743 will support the optional |
|
HDMI CEC feature. |
|
|
|
config VIDEO_TVP514X |
|
tristate "Texas Instruments TVP514x video decoder" |
|
depends on VIDEO_V4L2 && I2C |
|
select V4L2_FWNODE |
|
help |
|
This is a Video4Linux2 sensor driver for the TI TVP5146/47 |
|
decoder. It is currently working with the TI OMAP3 camera |
|
controller. |
|
|
|
To compile this driver as a module, choose M here: the |
|
module will be called tvp514x. |
|
|
|
config VIDEO_TVP5150 |
|
tristate "Texas Instruments TVP5150 video decoder" |
|
depends on VIDEO_V4L2 && I2C |
|
select V4L2_FWNODE |
|
select REGMAP_I2C |
|
help |
|
Support for the Texas Instruments TVP5150 video decoder. |
|
|
|
To compile this driver as a module, choose M here: the |
|
module will be called tvp5150. |
|
|
|
config VIDEO_TVP7002 |
|
tristate "Texas Instruments TVP7002 video decoder" |
|
depends on VIDEO_V4L2 && I2C |
|
select V4L2_FWNODE |
|
help |
|
Support for the Texas Instruments TVP7002 video decoder. |
|
|
|
To compile this driver as a module, choose M here: the |
|
module will be called tvp7002. |
|
|
|
config VIDEO_TW2804 |
|
tristate "Techwell TW2804 multiple video decoder" |
|
depends on VIDEO_V4L2 && I2C |
|
help |
|
Support for the Techwell tw2804 multiple video decoder. |
|
|
|
To compile this driver as a module, choose M here: the |
|
module will be called tw2804. |
|
|
|
config VIDEO_TW9903 |
|
tristate "Techwell TW9903 video decoder" |
|
depends on VIDEO_V4L2 && I2C |
|
help |
|
Support for the Techwell tw9903 multi-standard video decoder |
|
with high quality down scaler. |
|
|
|
To compile this driver as a module, choose M here: the |
|
module will be called tw9903. |
|
|
|
config VIDEO_TW9906 |
|
tristate "Techwell TW9906 video decoder" |
|
depends on VIDEO_V4L2 && I2C |
|
help |
|
Support for the Techwell tw9906 enhanced multi-standard comb filter |
|
video decoder with YCbCr input support. |
|
|
|
To compile this driver as a module, choose M here: the |
|
module will be called tw9906. |
|
|
|
config VIDEO_TW9910 |
|
tristate "Techwell TW9910 video decoder" |
|
depends on VIDEO_V4L2 && I2C |
|
help |
|
Support for Techwell TW9910 NTSC/PAL/SECAM video decoder. |
|
|
|
To compile this driver as a module, choose M here: the |
|
module will be called tw9910. |
|
|
|
config VIDEO_VPX3220 |
|
tristate "vpx3220a, vpx3216b & vpx3214c video decoders" |
|
depends on VIDEO_V4L2 && I2C |
|
help |
|
Support for VPX322x video decoders. |
|
|
|
To compile this driver as a module, choose M here: the |
|
module will be called vpx3220. |
|
|
|
config VIDEO_MAX9286 |
|
tristate "Maxim MAX9286 GMSL deserializer support" |
|
depends on I2C && I2C_MUX |
|
depends on OF_GPIO |
|
select V4L2_FWNODE |
|
select VIDEO_V4L2_SUBDEV_API |
|
select MEDIA_CONTROLLER |
|
help |
|
This driver supports the Maxim MAX9286 GMSL deserializer. |
|
|
|
To compile this driver as a module, choose M here: the |
|
module will be called max9286. |
|
|
|
comment "Video and audio decoders" |
|
|
|
config VIDEO_SAA717X |
|
tristate "Philips SAA7171/3/4 audio/video decoders" |
|
depends on VIDEO_V4L2 && I2C |
|
help |
|
Support for the Philips SAA7171/3/4 audio/video decoders. |
|
|
|
To compile this driver as a module, choose M here: the |
|
module will be called saa717x. |
|
|
|
source "drivers/media/i2c/cx25840/Kconfig" |
|
|
|
endmenu |
|
|
|
menu "Video encoders" |
|
visible if !MEDIA_HIDE_ANCILLARY_SUBDRV |
|
|
|
config VIDEO_SAA7127 |
|
tristate "Philips SAA7127/9 digital video encoders" |
|
depends on VIDEO_V4L2 && I2C |
|
help |
|
Support for the Philips SAA7127/9 digital video encoders. |
|
|
|
To compile this driver as a module, choose M here: the |
|
module will be called saa7127. |
|
|
|
config VIDEO_SAA7185 |
|
tristate "Philips SAA7185 video encoder" |
|
depends on VIDEO_V4L2 && I2C |
|
help |
|
Support for the Philips SAA7185 video encoder. |
|
|
|
To compile this driver as a module, choose M here: the |
|
module will be called saa7185. |
|
|
|
config VIDEO_ADV7170 |
|
tristate "Analog Devices ADV7170 video encoder" |
|
depends on VIDEO_V4L2 && I2C |
|
help |
|
Support for the Analog Devices ADV7170 video encoder driver |
|
|
|
To compile this driver as a module, choose M here: the |
|
module will be called adv7170. |
|
|
|
config VIDEO_ADV7175 |
|
tristate "Analog Devices ADV7175 video encoder" |
|
depends on VIDEO_V4L2 && I2C |
|
help |
|
Support for the Analog Devices ADV7175 video encoder driver |
|
|
|
To compile this driver as a module, choose M here: the |
|
module will be called adv7175. |
|
|
|
config VIDEO_ADV7343 |
|
tristate "ADV7343 video encoder" |
|
depends on I2C |
|
help |
|
Support for Analog Devices I2C bus based ADV7343 encoder. |
|
|
|
To compile this driver as a module, choose M here: the |
|
module will be called adv7343. |
|
|
|
config VIDEO_ADV7393 |
|
tristate "ADV7393 video encoder" |
|
depends on I2C |
|
help |
|
Support for Analog Devices I2C bus based ADV7393 encoder. |
|
|
|
To compile this driver as a module, choose M here: the |
|
module will be called adv7393. |
|
|
|
config VIDEO_ADV7511 |
|
tristate "Analog Devices ADV7511 encoder" |
|
depends on VIDEO_V4L2 && I2C |
|
depends on DRM_I2C_ADV7511=n || COMPILE_TEST |
|
select MEDIA_CONTROLLER |
|
select VIDEO_V4L2_SUBDEV_API |
|
select HDMI |
|
help |
|
Support for the Analog Devices ADV7511 video encoder. |
|
|
|
This is a Analog Devices HDMI transmitter. |
|
|
|
To compile this driver as a module, choose M here: the |
|
module will be called adv7511. |
|
|
|
config VIDEO_ADV7511_CEC |
|
bool "Enable Analog Devices ADV7511 CEC support" |
|
depends on VIDEO_ADV7511 |
|
select CEC_CORE |
|
help |
|
When selected the adv7511 will support the optional |
|
HDMI CEC feature. |
|
|
|
config VIDEO_AD9389B |
|
tristate "Analog Devices AD9389B encoder" |
|
depends on VIDEO_V4L2 && I2C |
|
select MEDIA_CONTROLLER |
|
select VIDEO_V4L2_SUBDEV_API |
|
|
|
help |
|
Support for the Analog Devices AD9389B video encoder. |
|
|
|
This is a Analog Devices HDMI transmitter. |
|
|
|
To compile this driver as a module, choose M here: the |
|
module will be called ad9389b. |
|
|
|
config VIDEO_AK881X |
|
tristate "AK8813/AK8814 video encoders" |
|
depends on I2C |
|
help |
|
Video output driver for AKM AK8813 and AK8814 TV encoders |
|
|
|
config VIDEO_THS8200 |
|
tristate "Texas Instruments THS8200 video encoder" |
|
depends on VIDEO_V4L2 && I2C |
|
help |
|
Support for the Texas Instruments THS8200 video encoder. |
|
|
|
To compile this driver as a module, choose M here: the |
|
module will be called ths8200. |
|
endmenu |
|
|
|
menu "Video improvement chips" |
|
visible if !MEDIA_HIDE_ANCILLARY_SUBDRV |
|
|
|
config VIDEO_UPD64031A |
|
tristate "NEC Electronics uPD64031A Ghost Reduction" |
|
depends on VIDEO_V4L2 && I2C |
|
help |
|
Support for the NEC Electronics uPD64031A Ghost Reduction |
|
video chip. It is most often found in NTSC TV cards made for |
|
Japan and is used to reduce the 'ghosting' effect that can |
|
be present in analog TV broadcasts. |
|
|
|
To compile this driver as a module, choose M here: the |
|
module will be called upd64031a. |
|
|
|
config VIDEO_UPD64083 |
|
tristate "NEC Electronics uPD64083 3-Dimensional Y/C separation" |
|
depends on VIDEO_V4L2 && I2C |
|
help |
|
Support for the NEC Electronics uPD64083 3-Dimensional Y/C |
|
separation video chip. It is used to improve the quality of |
|
the colors of a composite signal. |
|
|
|
To compile this driver as a module, choose M here: the |
|
module will be called upd64083. |
|
endmenu |
|
|
|
menu "Audio/Video compression chips" |
|
visible if !MEDIA_HIDE_ANCILLARY_SUBDRV |
|
|
|
config VIDEO_SAA6752HS |
|
tristate "Philips SAA6752HS MPEG-2 Audio/Video Encoder" |
|
depends on VIDEO_V4L2 && I2C |
|
select CRC32 |
|
help |
|
Support for the Philips SAA6752HS MPEG-2 video and MPEG-audio/AC-3 |
|
audio encoder with multiplexer. |
|
|
|
To compile this driver as a module, choose M here: the |
|
module will be called saa6752hs. |
|
|
|
endmenu |
|
|
|
menu "SDR tuner chips" |
|
visible if !MEDIA_HIDE_ANCILLARY_SUBDRV |
|
|
|
config SDR_MAX2175 |
|
tristate "Maxim 2175 RF to Bits tuner" |
|
depends on VIDEO_V4L2 && MEDIA_SDR_SUPPORT && I2C |
|
select REGMAP_I2C |
|
help |
|
Support for Maxim 2175 tuner. It is an advanced analog/digital |
|
radio receiver with RF-to-Bits front-end designed for SDR solutions. |
|
|
|
To compile this driver as a module, choose M here; the |
|
module will be called max2175. |
|
|
|
|
|
endmenu |
|
|
|
menu "Miscellaneous helper chips" |
|
visible if !MEDIA_HIDE_ANCILLARY_SUBDRV |
|
|
|
config VIDEO_THS7303 |
|
tristate "THS7303/53 Video Amplifier" |
|
depends on VIDEO_V4L2 && I2C |
|
help |
|
Support for TI THS7303/53 video amplifier |
|
|
|
To compile this driver as a module, choose M here: the |
|
module will be called ths7303. |
|
|
|
config VIDEO_M52790 |
|
tristate "Mitsubishi M52790 A/V switch" |
|
depends on VIDEO_V4L2 && I2C |
|
help |
|
Support for the Mitsubishi M52790 A/V switch. |
|
|
|
To compile this driver as a module, choose M here: the |
|
module will be called m52790. |
|
|
|
config VIDEO_I2C |
|
tristate "I2C transport video support" |
|
depends on VIDEO_V4L2 && I2C |
|
select VIDEOBUF2_VMALLOC |
|
imply HWMON |
|
help |
|
Enable the I2C transport video support which supports the |
|
following: |
|
* Panasonic AMG88xx Grid-Eye Sensors |
|
* Melexis MLX90640 Thermal Cameras |
|
|
|
To compile this driver as a module, choose M here: the |
|
module will be called video-i2c |
|
|
|
config VIDEO_ST_MIPID02 |
|
tristate "STMicroelectronics MIPID02 CSI-2 to PARALLEL bridge" |
|
depends on I2C && VIDEO_V4L2 |
|
select MEDIA_CONTROLLER |
|
select VIDEO_V4L2_SUBDEV_API |
|
select V4L2_FWNODE |
|
help |
|
Support for STMicroelectronics MIPID02 CSI-2 to PARALLEL bridge. |
|
It is used to allow usage of CSI-2 sensor with PARALLEL port |
|
controller. |
|
|
|
To compile this driver as a module, choose M here: the |
|
module will be called st-mipid02. |
|
endmenu |
|
|
|
# |
|
# V4L2 I2C drivers that are related with Camera support |
|
# |
|
|
|
menu "Camera sensor devices" |
|
visible if MEDIA_CAMERA_SUPPORT |
|
|
|
config VIDEO_APTINA_PLL |
|
tristate |
|
|
|
config VIDEO_CCS_PLL |
|
tristate |
|
|
|
config VIDEO_HI556 |
|
tristate "Hynix Hi-556 sensor support" |
|
depends on I2C && VIDEO_V4L2 |
|
select MEDIA_CONTROLLER |
|
select VIDEO_V4L2_SUBDEV_API |
|
select V4L2_FWNODE |
|
help |
|
This is a Video4Linux2 sensor driver for the Hynix |
|
Hi-556 camera. |
|
|
|
To compile this driver as a module, choose M here: the |
|
module will be called hi556. |
|
|
|
config VIDEO_IMX214 |
|
tristate "Sony IMX214 sensor support" |
|
depends on GPIOLIB && I2C && VIDEO_V4L2 |
|
select V4L2_FWNODE |
|
select MEDIA_CONTROLLER |
|
select VIDEO_V4L2_SUBDEV_API |
|
select REGMAP_I2C |
|
help |
|
This is a Video4Linux2 sensor driver for the Sony |
|
IMX214 camera. |
|
|
|
To compile this driver as a module, choose M here: the |
|
module will be called imx214. |
|
|
|
config VIDEO_IMX219 |
|
tristate "Sony IMX219 sensor support" |
|
depends on I2C && VIDEO_V4L2 |
|
select MEDIA_CONTROLLER |
|
select VIDEO_V4L2_SUBDEV_API |
|
select V4L2_FWNODE |
|
help |
|
This is a Video4Linux2 sensor driver for the Sony |
|
IMX219 camera. |
|
|
|
To compile this driver as a module, choose M here: the |
|
module will be called imx219. |
|
|
|
config VIDEO_IMX258 |
|
tristate "Sony IMX258 sensor support" |
|
depends on I2C && VIDEO_V4L2 |
|
select MEDIA_CONTROLLER |
|
select VIDEO_V4L2_SUBDEV_API |
|
help |
|
This is a Video4Linux2 sensor driver for the Sony |
|
IMX258 camera. |
|
|
|
To compile this driver as a module, choose M here: the |
|
module will be called imx258. |
|
|
|
config VIDEO_IMX274 |
|
tristate "Sony IMX274 sensor support" |
|
depends on I2C && VIDEO_V4L2 |
|
select MEDIA_CONTROLLER |
|
select VIDEO_V4L2_SUBDEV_API |
|
select REGMAP_I2C |
|
help |
|
This is a V4L2 sensor driver for the Sony IMX274 |
|
CMOS image sensor. |
|
|
|
config VIDEO_IMX290 |
|
tristate "Sony IMX290 sensor support" |
|
depends on I2C && VIDEO_V4L2 |
|
select MEDIA_CONTROLLER |
|
select VIDEO_V4L2_SUBDEV_API |
|
select REGMAP_I2C |
|
select V4L2_FWNODE |
|
help |
|
This is a Video4Linux2 sensor driver for the Sony |
|
IMX290 camera sensor. |
|
|
|
To compile this driver as a module, choose M here: the |
|
module will be called imx290. |
|
|
|
config VIDEO_IMX477 |
|
tristate "Sony IMX477 sensor support" |
|
depends on I2C && VIDEO_V4L2 && VIDEO_V4L2_SUBDEV_API |
|
depends on MEDIA_CAMERA_SUPPORT |
|
help |
|
This is a Video4Linux2 sensor driver for the Sony |
|
IMX477 camera. |
|
|
|
To compile this driver as a module, choose M here: the |
|
module will be called imx477. |
|
|
|
config VIDEO_IMX319 |
|
tristate "Sony IMX319 sensor support" |
|
depends on I2C && VIDEO_V4L2 |
|
select MEDIA_CONTROLLER |
|
select VIDEO_V4L2_SUBDEV_API |
|
help |
|
This is a Video4Linux2 sensor driver for the Sony |
|
IMX319 camera. |
|
|
|
To compile this driver as a module, choose M here: the |
|
module will be called imx319. |
|
|
|
config VIDEO_IMX334 |
|
tristate "Sony IMX334 sensor support" |
|
depends on OF_GPIO |
|
depends on I2C && VIDEO_V4L2 |
|
select VIDEO_V4L2_SUBDEV_API |
|
select MEDIA_CONTROLLER |
|
select V4L2_FWNODE |
|
help |
|
This is a Video4Linux2 sensor driver for the Sony |
|
IMX334 camera. |
|
|
|
To compile this driver as a module, choose M here: the |
|
module will be called imx334. |
|
|
|
config VIDEO_IMX355 |
|
tristate "Sony IMX355 sensor support" |
|
depends on I2C && VIDEO_V4L2 |
|
select MEDIA_CONTROLLER |
|
select VIDEO_V4L2_SUBDEV_API |
|
help |
|
This is a Video4Linux2 sensor driver for the Sony |
|
IMX355 camera. |
|
|
|
To compile this driver as a module, choose M here: the |
|
module will be called imx355. |
|
|
|
config VIDEO_OV02A10 |
|
tristate "OmniVision OV02A10 sensor support" |
|
depends on VIDEO_V4L2 && I2C |
|
select MEDIA_CONTROLLER |
|
select VIDEO_V4L2_SUBDEV_API |
|
select V4L2_FWNODE |
|
help |
|
This is a Video4Linux2 sensor driver for the OmniVision |
|
OV02A10 camera. |
|
|
|
To compile this driver as a module, choose M here: the |
|
module will be called ov02a10. |
|
|
|
config VIDEO_OV2640 |
|
tristate "OmniVision OV2640 sensor support" |
|
depends on VIDEO_V4L2 && I2C |
|
help |
|
This is a Video4Linux2 sensor driver for the OmniVision |
|
OV2640 camera. |
|
|
|
To compile this driver as a module, choose M here: the |
|
module will be called ov2640. |
|
|
|
config VIDEO_OV2659 |
|
tristate "OmniVision OV2659 sensor support" |
|
depends on VIDEO_V4L2 && I2C && GPIOLIB |
|
select V4L2_FWNODE |
|
help |
|
This is a Video4Linux2 sensor driver for the OmniVision |
|
OV2659 camera. |
|
|
|
To compile this driver as a module, choose M here: the |
|
module will be called ov2659. |
|
|
|
config VIDEO_OV2680 |
|
tristate "OmniVision OV2680 sensor support" |
|
depends on VIDEO_V4L2 && I2C |
|
select MEDIA_CONTROLLER |
|
select V4L2_FWNODE |
|
help |
|
This is a Video4Linux2 sensor driver for the OmniVision |
|
OV2680 camera. |
|
|
|
To compile this driver as a module, choose M here: the |
|
module will be called ov2680. |
|
|
|
config VIDEO_OV2685 |
|
tristate "OmniVision OV2685 sensor support" |
|
depends on VIDEO_V4L2 && I2C |
|
select MEDIA_CONTROLLER |
|
select V4L2_FWNODE |
|
help |
|
This is a Video4Linux2 sensor driver for the OmniVision |
|
OV2685 camera. |
|
|
|
To compile this driver as a module, choose M here: the |
|
module will be called ov2685. |
|
|
|
config VIDEO_OV2740 |
|
tristate "OmniVision OV2740 sensor support" |
|
depends on VIDEO_V4L2 && I2C |
|
depends on ACPI || COMPILE_TEST |
|
select MEDIA_CONTROLLER |
|
select VIDEO_V4L2_SUBDEV_API |
|
select V4L2_FWNODE |
|
select REGMAP_I2C |
|
help |
|
This is a Video4Linux2 sensor driver for the OmniVision |
|
OV2740 camera. |
|
|
|
To compile this driver as a module, choose M here: the |
|
module will be called ov2740. |
|
|
|
config VIDEO_OV5640 |
|
tristate "OmniVision OV5640 sensor support" |
|
depends on OF |
|
depends on GPIOLIB && VIDEO_V4L2 && I2C |
|
select MEDIA_CONTROLLER |
|
select VIDEO_V4L2_SUBDEV_API |
|
select V4L2_FWNODE |
|
help |
|
This is a Video4Linux2 sensor driver for the Omnivision |
|
OV5640 camera sensor with a MIPI CSI-2 interface. |
|
|
|
config VIDEO_OV5645 |
|
tristate "OmniVision OV5645 sensor support" |
|
depends on OF |
|
depends on I2C && VIDEO_V4L2 |
|
select MEDIA_CONTROLLER |
|
select VIDEO_V4L2_SUBDEV_API |
|
select V4L2_FWNODE |
|
help |
|
This is a Video4Linux2 sensor driver for the OmniVision |
|
OV5645 camera. |
|
|
|
To compile this driver as a module, choose M here: the |
|
module will be called ov5645. |
|
|
|
config VIDEO_OV5647 |
|
tristate "OmniVision OV5647 sensor support" |
|
depends on I2C && VIDEO_V4L2 |
|
select MEDIA_CONTROLLER |
|
select VIDEO_V4L2_SUBDEV_API |
|
select V4L2_FWNODE |
|
help |
|
This is a Video4Linux2 sensor driver for the OmniVision |
|
OV5647 camera. |
|
|
|
To compile this driver as a module, choose M here: the |
|
module will be called ov5647. |
|
|
|
config VIDEO_OV5648 |
|
tristate "OmniVision OV5648 sensor support" |
|
depends on I2C && PM && VIDEO_V4L2 |
|
select MEDIA_CONTROLLER |
|
select VIDEO_V4L2_SUBDEV_API |
|
select V4L2_FWNODE |
|
help |
|
This is a Video4Linux2 sensor driver for the OmniVision |
|
OV5648 camera. |
|
|
|
To compile this driver as a module, choose M here: the |
|
module will be called ov5648. |
|
|
|
config VIDEO_OV6650 |
|
tristate "OmniVision OV6650 sensor support" |
|
depends on I2C && VIDEO_V4L2 |
|
help |
|
This is a Video4Linux2 sensor driver for the OmniVision |
|
OV6650 camera. |
|
|
|
To compile this driver as a module, choose M here: the |
|
module will be called ov6650. |
|
|
|
config VIDEO_OV5670 |
|
tristate "OmniVision OV5670 sensor support" |
|
depends on I2C && VIDEO_V4L2 |
|
select MEDIA_CONTROLLER |
|
select VIDEO_V4L2_SUBDEV_API |
|
select V4L2_FWNODE |
|
help |
|
This is a Video4Linux2 sensor driver for the OmniVision |
|
OV5670 camera. |
|
|
|
To compile this driver as a module, choose M here: the |
|
module will be called ov5670. |
|
|
|
config VIDEO_OV5675 |
|
tristate "OmniVision OV5675 sensor support" |
|
depends on I2C && VIDEO_V4L2 |
|
select MEDIA_CONTROLLER |
|
select VIDEO_V4L2_SUBDEV_API |
|
select V4L2_FWNODE |
|
help |
|
This is a Video4Linux2 sensor driver for the OmniVision |
|
OV5675 camera. |
|
|
|
To compile this driver as a module, choose M here: the |
|
module will be called ov5675. |
|
|
|
config VIDEO_OV5695 |
|
tristate "OmniVision OV5695 sensor support" |
|
depends on I2C && VIDEO_V4L2 |
|
select V4L2_FWNODE |
|
help |
|
This is a Video4Linux2 sensor driver for the OmniVision |
|
OV5695 camera. |
|
|
|
To compile this driver as a module, choose M here: the |
|
module will be called ov5695. |
|
|
|
config VIDEO_OV7251 |
|
tristate "OmniVision OV7251 sensor support" |
|
depends on I2C && VIDEO_V4L2 |
|
select MEDIA_CONTROLLER |
|
select VIDEO_V4L2_SUBDEV_API |
|
select V4L2_FWNODE |
|
help |
|
This is a Video4Linux2 sensor driver for the OmniVision |
|
OV7251 camera. |
|
|
|
To compile this driver as a module, choose M here: the |
|
module will be called ov7251. |
|
|
|
config VIDEO_OV772X |
|
tristate "OmniVision OV772x sensor support" |
|
depends on I2C && VIDEO_V4L2 |
|
select REGMAP_SCCB |
|
select V4L2_FWNODE |
|
help |
|
This is a Video4Linux2 sensor driver for the OmniVision |
|
OV772x camera. |
|
|
|
To compile this driver as a module, choose M here: the |
|
module will be called ov772x. |
|
|
|
config VIDEO_OV7640 |
|
tristate "OmniVision OV7640 sensor support" |
|
depends on I2C && VIDEO_V4L2 |
|
help |
|
This is a Video4Linux2 sensor driver for the OmniVision |
|
OV7640 camera. |
|
|
|
To compile this driver as a module, choose M here: the |
|
module will be called ov7640. |
|
|
|
config VIDEO_OV7670 |
|
tristate "OmniVision OV7670 sensor support" |
|
depends on I2C && VIDEO_V4L2 |
|
select V4L2_FWNODE |
|
help |
|
This is a Video4Linux2 sensor driver for the OmniVision |
|
OV7670 VGA camera. It currently only works with the M88ALP01 |
|
controller. |
|
|
|
config VIDEO_OV7740 |
|
tristate "OmniVision OV7740 sensor support" |
|
depends on I2C && VIDEO_V4L2 |
|
select REGMAP_SCCB |
|
help |
|
This is a Video4Linux2 sensor driver for the OmniVision |
|
OV7740 VGA camera sensor. |
|
|
|
config VIDEO_OV8856 |
|
tristate "OmniVision OV8856 sensor support" |
|
depends on I2C && VIDEO_V4L2 |
|
select MEDIA_CONTROLLER |
|
select VIDEO_V4L2_SUBDEV_API |
|
select V4L2_FWNODE |
|
help |
|
This is a Video4Linux2 sensor driver for the OmniVision |
|
OV8856 camera sensor. |
|
|
|
To compile this driver as a module, choose M here: the |
|
module will be called ov8856. |
|
|
|
config VIDEO_OV8865 |
|
tristate "OmniVision OV8865 sensor support" |
|
depends on I2C && PM && VIDEO_V4L2 |
|
select MEDIA_CONTROLLER |
|
select VIDEO_V4L2_SUBDEV_API |
|
select V4L2_FWNODE |
|
help |
|
This is a Video4Linux2 sensor driver for OmniVision |
|
OV8865 camera sensor. |
|
|
|
To compile this driver as a module, choose M here: the |
|
module will be called ov8865. |
|
|
|
config VIDEO_OV9640 |
|
tristate "OmniVision OV9640 sensor support" |
|
depends on I2C && VIDEO_V4L2 |
|
help |
|
This is a Video4Linux2 sensor driver for the OmniVision |
|
OV9640 camera sensor. |
|
|
|
config VIDEO_OV9281 |
|
tristate "OmniVision OV9281 sensor support" |
|
depends on I2C && VIDEO_V4L2 |
|
depends on MEDIA_CAMERA_SUPPORT |
|
help |
|
This is a Video4Linux2 sensor-level driver for the OmniVision |
|
OV9281 camera. |
|
|
|
To compile this driver as a module, choose M here: the |
|
module will be called ov9281. |
|
|
|
config VIDEO_OV9650 |
|
tristate "OmniVision OV9650/OV9652 sensor support" |
|
depends on I2C && VIDEO_V4L2 |
|
select MEDIA_CONTROLLER |
|
select VIDEO_V4L2_SUBDEV_API |
|
select REGMAP_SCCB |
|
help |
|
This is a V4L2 sensor driver for the Omnivision |
|
OV9650 and OV9652 camera sensors. |
|
|
|
config VIDEO_OV9734 |
|
tristate "OmniVision OV9734 sensor support" |
|
depends on VIDEO_V4L2 && I2C |
|
depends on ACPI || COMPILE_TEST |
|
select MEDIA_CONTROLLER |
|
select VIDEO_V4L2_SUBDEV_API |
|
select V4L2_FWNODE |
|
help |
|
This is a Video4Linux2 sensor driver for the OmniVision |
|
OV9734 camera. |
|
|
|
To compile this driver as a module, choose M here: the |
|
module's name is ov9734. |
|
|
|
config VIDEO_OV13858 |
|
tristate "OmniVision OV13858 sensor support" |
|
depends on I2C && VIDEO_V4L2 |
|
select MEDIA_CONTROLLER |
|
select VIDEO_V4L2_SUBDEV_API |
|
select V4L2_FWNODE |
|
help |
|
This is a Video4Linux2 sensor driver for the OmniVision |
|
OV13858 camera. |
|
|
|
config VIDEO_IRS1125 |
|
tristate "Infineon IRS1125 sensor support" |
|
depends on I2C && VIDEO_V4L2 && VIDEO_V4L2_SUBDEV_API |
|
depends on MEDIA_CAMERA_SUPPORT |
|
select V4L2_FWNODE |
|
help |
|
This is a Video4Linux2 sensor-level driver for the Infineon |
|
IRS1125 camera. |
|
|
|
To compile this driver as a module, choose M here: the |
|
module will be called irs1125. |
|
|
|
config VIDEO_VS6624 |
|
tristate "ST VS6624 sensor support" |
|
depends on VIDEO_V4L2 && I2C |
|
help |
|
This is a Video4Linux2 sensor driver for the ST VS6624 |
|
camera. |
|
|
|
To compile this driver as a module, choose M here: the |
|
module will be called vs6624. |
|
|
|
config VIDEO_MT9M001 |
|
tristate "mt9m001 support" |
|
depends on I2C && VIDEO_V4L2 |
|
select MEDIA_CONTROLLER |
|
select VIDEO_V4L2_SUBDEV_API |
|
help |
|
This driver supports MT9M001 cameras from Micron, monochrome |
|
and colour models. |
|
|
|
config VIDEO_MT9M032 |
|
tristate "MT9M032 camera sensor support" |
|
depends on I2C && VIDEO_V4L2 |
|
select MEDIA_CONTROLLER |
|
select VIDEO_V4L2_SUBDEV_API |
|
select VIDEO_APTINA_PLL |
|
help |
|
This driver supports MT9M032 camera sensors from Aptina, monochrome |
|
models only. |
|
|
|
config VIDEO_MT9M111 |
|
tristate "mt9m111, mt9m112 and mt9m131 support" |
|
depends on I2C && VIDEO_V4L2 |
|
select V4L2_FWNODE |
|
help |
|
This driver supports MT9M111, MT9M112 and MT9M131 cameras from |
|
Micron/Aptina |
|
|
|
config VIDEO_MT9P031 |
|
tristate "Aptina MT9P031 support" |
|
depends on I2C && VIDEO_V4L2 |
|
select MEDIA_CONTROLLER |
|
select VIDEO_V4L2_SUBDEV_API |
|
select VIDEO_APTINA_PLL |
|
help |
|
This is a Video4Linux2 sensor driver for the Aptina |
|
(Micron) mt9p031 5 Mpixel camera. |
|
|
|
config VIDEO_MT9T001 |
|
tristate "Aptina MT9T001 support" |
|
depends on I2C && VIDEO_V4L2 |
|
select MEDIA_CONTROLLER |
|
select VIDEO_V4L2_SUBDEV_API |
|
help |
|
This is a Video4Linux2 sensor driver for the Aptina |
|
(Micron) mt0t001 3 Mpixel camera. |
|
|
|
config VIDEO_MT9T112 |
|
tristate "Aptina MT9T111/MT9T112 support" |
|
depends on I2C && VIDEO_V4L2 |
|
help |
|
This is a Video4Linux2 sensor driver for the Aptina |
|
(Micron) MT9T111 and MT9T112 3 Mpixel camera. |
|
|
|
To compile this driver as a module, choose M here: the |
|
module will be called mt9t112. |
|
|
|
config VIDEO_MT9V011 |
|
tristate "Micron mt9v011 sensor support" |
|
depends on I2C && VIDEO_V4L2 |
|
help |
|
This is a Video4Linux2 sensor driver for the Micron |
|
mt0v011 1.3 Mpixel camera. It currently only works with the |
|
em28xx driver. |
|
|
|
config VIDEO_MT9V032 |
|
tristate "Micron MT9V032 sensor support" |
|
depends on I2C && VIDEO_V4L2 |
|
select MEDIA_CONTROLLER |
|
select VIDEO_V4L2_SUBDEV_API |
|
select REGMAP_I2C |
|
select V4L2_FWNODE |
|
help |
|
This is a Video4Linux2 sensor driver for the Micron |
|
MT9V032 752x480 CMOS sensor. |
|
|
|
config VIDEO_MT9V111 |
|
tristate "Aptina MT9V111 sensor support" |
|
depends on I2C && VIDEO_V4L2 |
|
help |
|
This is a Video4Linux2 sensor driver for the Aptina/Micron |
|
MT9V111 sensor. |
|
|
|
To compile this driver as a module, choose M here: the |
|
module will be called mt9v111. |
|
|
|
config VIDEO_SR030PC30 |
|
tristate "Siliconfile SR030PC30 sensor support" |
|
depends on I2C && VIDEO_V4L2 |
|
help |
|
This driver supports SR030PC30 VGA camera from Siliconfile |
|
|
|
config VIDEO_NOON010PC30 |
|
tristate "Siliconfile NOON010PC30 sensor support" |
|
depends on I2C && VIDEO_V4L2 |
|
select MEDIA_CONTROLLER |
|
select VIDEO_V4L2_SUBDEV_API |
|
help |
|
This driver supports NOON010PC30 CIF camera from Siliconfile |
|
|
|
source "drivers/media/i2c/m5mols/Kconfig" |
|
|
|
config VIDEO_MAX9271_LIB |
|
tristate |
|
|
|
config VIDEO_RDACM20 |
|
tristate "IMI RDACM20 camera support" |
|
depends on I2C |
|
select V4L2_FWNODE |
|
select VIDEO_V4L2_SUBDEV_API |
|
select MEDIA_CONTROLLER |
|
select VIDEO_MAX9271_LIB |
|
help |
|
This driver supports the IMI RDACM20 GMSL camera, used in |
|
ADAS systems. |
|
|
|
This camera should be used in conjunction with a GMSL |
|
deserialiser such as the MAX9286. |
|
|
|
config VIDEO_RDACM21 |
|
tristate "IMI RDACM21 camera support" |
|
depends on I2C |
|
select V4L2_FWNODE |
|
select VIDEO_V4L2_SUBDEV_API |
|
select MEDIA_CONTROLLER |
|
select VIDEO_MAX9271_LIB |
|
help |
|
This driver supports the IMI RDACM21 GMSL camera, used in |
|
ADAS systems. |
|
|
|
This camera should be used in conjunction with a GMSL |
|
deserialiser such as the MAX9286. |
|
|
|
config VIDEO_RJ54N1 |
|
tristate "Sharp RJ54N1CB0C sensor support" |
|
depends on I2C && VIDEO_V4L2 |
|
help |
|
This is a V4L2 sensor driver for Sharp RJ54N1CB0C CMOS image |
|
sensor. |
|
|
|
To compile this driver as a module, choose M here: the |
|
module will be called rj54n1. |
|
|
|
config VIDEO_S5K6AA |
|
tristate "Samsung S5K6AAFX sensor support" |
|
depends on I2C && VIDEO_V4L2 |
|
select MEDIA_CONTROLLER |
|
select VIDEO_V4L2_SUBDEV_API |
|
help |
|
This is a V4L2 sensor driver for Samsung S5K6AA(FX) 1.3M |
|
camera sensor with an embedded SoC image signal processor. |
|
|
|
config VIDEO_S5K6A3 |
|
tristate "Samsung S5K6A3 sensor support" |
|
depends on I2C && VIDEO_V4L2 |
|
select MEDIA_CONTROLLER |
|
select VIDEO_V4L2_SUBDEV_API |
|
help |
|
This is a V4L2 sensor driver for Samsung S5K6A3 raw |
|
camera sensor. |
|
|
|
config VIDEO_S5K4ECGX |
|
tristate "Samsung S5K4ECGX sensor support" |
|
depends on I2C && VIDEO_V4L2 |
|
select MEDIA_CONTROLLER |
|
select VIDEO_V4L2_SUBDEV_API |
|
select CRC32 |
|
help |
|
This is a V4L2 sensor driver for Samsung S5K4ECGX 5M |
|
camera sensor with an embedded SoC image signal processor. |
|
|
|
config VIDEO_S5K5BAF |
|
tristate "Samsung S5K5BAF sensor support" |
|
depends on I2C && VIDEO_V4L2 |
|
select MEDIA_CONTROLLER |
|
select VIDEO_V4L2_SUBDEV_API |
|
select V4L2_FWNODE |
|
help |
|
This is a V4L2 sensor driver for Samsung S5K5BAF 2M |
|
camera sensor with an embedded SoC image signal processor. |
|
|
|
source "drivers/media/i2c/ccs/Kconfig" |
|
source "drivers/media/i2c/et8ek8/Kconfig" |
|
|
|
config VIDEO_S5C73M3 |
|
tristate "Samsung S5C73M3 sensor support" |
|
depends on I2C && SPI && VIDEO_V4L2 |
|
select MEDIA_CONTROLLER |
|
select VIDEO_V4L2_SUBDEV_API |
|
select V4L2_FWNODE |
|
help |
|
This is a V4L2 sensor driver for Samsung S5C73M3 |
|
8 Mpixel camera. |
|
|
|
endmenu |
|
|
|
menu "Lens drivers" |
|
visible if MEDIA_CAMERA_SUPPORT |
|
|
|
config VIDEO_AD5820 |
|
tristate "AD5820 lens voice coil support" |
|
depends on GPIOLIB && I2C && VIDEO_V4L2 |
|
select MEDIA_CONTROLLER |
|
help |
|
This is a driver for the AD5820 camera lens voice coil. |
|
It is used for example in Nokia N900 (RX-51). |
|
|
|
config VIDEO_AK7375 |
|
tristate "AK7375 lens voice coil support" |
|
depends on I2C && VIDEO_V4L2 |
|
select MEDIA_CONTROLLER |
|
select VIDEO_V4L2_SUBDEV_API |
|
help |
|
This is a driver for the AK7375 camera lens voice coil. |
|
AK7375 is a 12 bit DAC with 120mA output current sink |
|
capability. This is designed for linear control of |
|
voice coil motors, controlled via I2C serial interface. |
|
|
|
config VIDEO_DW9714 |
|
tristate "DW9714 lens voice coil support" |
|
depends on I2C && VIDEO_V4L2 |
|
select MEDIA_CONTROLLER |
|
select VIDEO_V4L2_SUBDEV_API |
|
help |
|
This is a driver for the DW9714 camera lens voice coil. |
|
DW9714 is a 10 bit DAC with 120mA output current sink |
|
capability. This is designed for linear control of |
|
voice coil motors, controlled via I2C serial interface. |
|
|
|
config VIDEO_DW9768 |
|
tristate "DW9768 lens voice coil support" |
|
depends on I2C && VIDEO_V4L2 |
|
select MEDIA_CONTROLLER |
|
select VIDEO_V4L2_SUBDEV_API |
|
select V4L2_FWNODE |
|
help |
|
This is a driver for the DW9768 camera lens voice coil. |
|
DW9768 is a 10 bit DAC with 100mA output current sink |
|
capability. This is designed for linear control of |
|
voice coil motors, controlled via I2C serial interface. |
|
|
|
config VIDEO_DW9807_VCM |
|
tristate "DW9807 lens voice coil support" |
|
depends on I2C && VIDEO_V4L2 |
|
select MEDIA_CONTROLLER |
|
select VIDEO_V4L2_SUBDEV_API |
|
help |
|
This is a driver for the DW9807 camera lens voice coil. |
|
DW9807 is a 10 bit DAC with 100mA output current sink |
|
capability. This is designed for linear control of |
|
voice coil motors, controlled via I2C serial interface. |
|
|
|
endmenu |
|
|
|
menu "Flash devices" |
|
visible if MEDIA_CAMERA_SUPPORT |
|
|
|
config VIDEO_ADP1653 |
|
tristate "ADP1653 flash support" |
|
depends on I2C && VIDEO_V4L2 |
|
select MEDIA_CONTROLLER |
|
help |
|
This is a driver for the ADP1653 flash controller. It is used for |
|
example in Nokia N900. |
|
|
|
config VIDEO_LM3560 |
|
tristate "LM3560 dual flash driver support" |
|
depends on I2C && VIDEO_V4L2 |
|
select MEDIA_CONTROLLER |
|
select REGMAP_I2C |
|
help |
|
This is a driver for the lm3560 dual flash controllers. It controls |
|
flash, torch LEDs. |
|
|
|
config VIDEO_LM3646 |
|
tristate "LM3646 dual flash driver support" |
|
depends on I2C && VIDEO_V4L2 |
|
select MEDIA_CONTROLLER |
|
select REGMAP_I2C |
|
help |
|
This is a driver for the lm3646 dual flash controllers. It controls |
|
flash, torch LEDs. |
|
endmenu |
|
|
|
endif # VIDEO_V4L2
|
|
|