mirror of https://github.com/Qortal/Brooklyn
You can not select more than 25 topics
Topics must start with a letter or number, can include dashes ('-') and can be up to 35 characters long.
70 lines
2.1 KiB
70 lines
2.1 KiB
Kernel driver max197 |
|
==================== |
|
|
|
Author: |
|
|
|
* Vivien Didelot <[email protected]> |
|
|
|
Supported chips: |
|
|
|
* Maxim MAX197 |
|
|
|
Prefix: 'max197' |
|
|
|
Datasheet: http://datasheets.maxim-ic.com/en/ds/MAX197.pdf |
|
|
|
* Maxim MAX199 |
|
|
|
Prefix: 'max199' |
|
|
|
Datasheet: http://datasheets.maxim-ic.com/en/ds/MAX199.pdf |
|
|
|
Description |
|
----------- |
|
|
|
The A/D converters MAX197, and MAX199 are both 8-Channel, Multi-Range, 5V, |
|
12-Bit DAS with 8+4 Bus Interface and Fault Protection. |
|
|
|
The available ranges for the MAX197 are {0,-5V} to 5V, and {0,-10V} to 10V, |
|
while they are {0,-2V} to 2V, and {0,-4V} to 4V on the MAX199. |
|
|
|
Platform data |
|
------------- |
|
|
|
The MAX197 platform data (defined in linux/platform_data/max197.h) should be |
|
filled with a pointer to a conversion function, defined like:: |
|
|
|
int convert(u8 ctrl); |
|
|
|
ctrl is the control byte to write to start a new conversion. |
|
On success, the function must return the 12-bit raw value read from the chip, |
|
or a negative error code otherwise. |
|
|
|
Control byte format: |
|
|
|
======= ========== ============================================ |
|
Bit Name Description |
|
7,6 PD1,PD0 Clock and Power-Down modes |
|
5 ACQMOD Internal or External Controlled Acquisition |
|
4 RNG Full-scale voltage magnitude at the input |
|
3 BIP Unipolar or Bipolar conversion mode |
|
2,1,0 A2,A1,A0 Channel |
|
======= ========== ============================================ |
|
|
|
Sysfs interface |
|
--------------- |
|
|
|
============== ============================================================== |
|
in[0-7]_input The conversion value for the corresponding channel. |
|
RO |
|
|
|
in[0-7]_min The lower limit (in mV) for the corresponding channel. |
|
For the MAX197, it will be adjusted to -10000, -5000, or 0. |
|
For the MAX199, it will be adjusted to -4000, -2000, or 0. |
|
RW |
|
|
|
in[0-7]_max The higher limit (in mV) for the corresponding channel. |
|
For the MAX197, it will be adjusted to 0, 5000, or 10000. |
|
For the MAX199, it will be adjusted to 0, 2000, or 4000. |
|
RW |
|
============== ==============================================================
|
|
|