mirror of https://github.com/Qortal/Brooklyn
You can not select more than 25 topics
Topics must start with a letter or number, can include dashes ('-') and can be up to 35 characters long.
494 lines
17 KiB
494 lines
17 KiB
/* SPDX-License-Identifier: GPL-2.0 WITH Linux-syscall-note */ |
|
/* $Revision: 3.0 $$Date: 1998/11/02 14:20:59 $ |
|
* linux/include/linux/cyclades.h |
|
* |
|
* This file was initially written by |
|
* Randolph Bentson <[email protected]> and is maintained by |
|
* Ivan Passos <[email protected]>. |
|
* |
|
* This file contains the general definitions for the cyclades.c driver |
|
*$Log: cyclades.h,v $ |
|
*Revision 3.1 2002/01/29 11:36:16 henrique |
|
*added throttle field on struct cyclades_port to indicate whether the |
|
*port is throttled or not |
|
* |
|
*Revision 3.1 2000/04/19 18:52:52 ivan |
|
*converted address fields to unsigned long and added fields for physical |
|
*addresses on cyclades_card structure; |
|
* |
|
*Revision 3.0 1998/11/02 14:20:59 ivan |
|
*added nports field on cyclades_card structure; |
|
* |
|
*Revision 2.5 1998/08/03 16:57:01 ivan |
|
*added cyclades_idle_stats structure; |
|
* |
|
*Revision 2.4 1998/06/01 12:09:53 ivan |
|
*removed closing_wait2 from cyclades_port structure; |
|
* |
|
*Revision 2.3 1998/03/16 18:01:12 ivan |
|
*changes in the cyclades_port structure to get it closer to the |
|
*standard serial port structure; |
|
*added constants for new ioctls; |
|
* |
|
*Revision 2.2 1998/02/17 16:50:00 ivan |
|
*changes in the cyclades_port structure (addition of shutdown_wait and |
|
*chip_rev variables); |
|
*added constants for new ioctls and for CD1400 rev. numbers. |
|
* |
|
*Revision 2.1 1997/10/24 16:03:00 ivan |
|
*added rflow (which allows enabling the CD1400 special flow control |
|
*feature) and rtsdtr_inv (which allows DTR/RTS pin inversion) to |
|
*cyclades_port structure; |
|
*added Alpha support |
|
* |
|
*Revision 2.0 1997/06/30 10:30:00 ivan |
|
*added some new doorbell command constants related to IOCTLW and |
|
*UART error signaling |
|
* |
|
*Revision 1.8 1997/06/03 15:30:00 ivan |
|
*added constant ZFIRM_HLT |
|
*added constant CyPCI_Ze_win ( = 2 * Cy_PCI_Zwin) |
|
* |
|
*Revision 1.7 1997/03/26 10:30:00 daniel |
|
*new entries at the end of cyclades_port struct to reallocate |
|
*variables illegally allocated within card memory. |
|
* |
|
*Revision 1.6 1996/09/09 18:35:30 bentson |
|
*fold in changes for Cyclom-Z -- including structures for |
|
*communicating with board as well modest changes to original |
|
*structures to support new features. |
|
* |
|
*Revision 1.5 1995/11/13 21:13:31 bentson |
|
*changes suggested by Michael Chastain <[email protected]> |
|
*to support use of this file in non-kernel applications |
|
* |
|
* |
|
*/ |
|
|
|
#ifndef _UAPI_LINUX_CYCLADES_H |
|
#define _UAPI_LINUX_CYCLADES_H |
|
|
|
#include <linux/types.h> |
|
|
|
struct cyclades_monitor { |
|
unsigned long int_count; |
|
unsigned long char_count; |
|
unsigned long char_max; |
|
unsigned long char_last; |
|
}; |
|
|
|
/* |
|
* These stats all reflect activity since the device was last initialized. |
|
* (i.e., since the port was opened with no other processes already having it |
|
* open) |
|
*/ |
|
struct cyclades_idle_stats { |
|
__kernel_old_time_t in_use; /* Time device has been in use (secs) */ |
|
__kernel_old_time_t recv_idle; /* Time since last char received (secs) */ |
|
__kernel_old_time_t xmit_idle; /* Time since last char transmitted (secs) */ |
|
unsigned long recv_bytes; /* Bytes received */ |
|
unsigned long xmit_bytes; /* Bytes transmitted */ |
|
unsigned long overruns; /* Input overruns */ |
|
unsigned long frame_errs; /* Input framing errors */ |
|
unsigned long parity_errs; /* Input parity errors */ |
|
}; |
|
|
|
#define CYCLADES_MAGIC 0x4359 |
|
|
|
#define CYGETMON 0x435901 |
|
#define CYGETTHRESH 0x435902 |
|
#define CYSETTHRESH 0x435903 |
|
#define CYGETDEFTHRESH 0x435904 |
|
#define CYSETDEFTHRESH 0x435905 |
|
#define CYGETTIMEOUT 0x435906 |
|
#define CYSETTIMEOUT 0x435907 |
|
#define CYGETDEFTIMEOUT 0x435908 |
|
#define CYSETDEFTIMEOUT 0x435909 |
|
#define CYSETRFLOW 0x43590a |
|
#define CYGETRFLOW 0x43590b |
|
#define CYSETRTSDTR_INV 0x43590c |
|
#define CYGETRTSDTR_INV 0x43590d |
|
#define CYZSETPOLLCYCLE 0x43590e |
|
#define CYZGETPOLLCYCLE 0x43590f |
|
#define CYGETCD1400VER 0x435910 |
|
#define CYSETWAIT 0x435912 |
|
#define CYGETWAIT 0x435913 |
|
|
|
/*************** CYCLOM-Z ADDITIONS ***************/ |
|
|
|
#define CZIOC ('M' << 8) |
|
#define CZ_NBOARDS (CZIOC|0xfa) |
|
#define CZ_BOOT_START (CZIOC|0xfb) |
|
#define CZ_BOOT_DATA (CZIOC|0xfc) |
|
#define CZ_BOOT_END (CZIOC|0xfd) |
|
#define CZ_TEST (CZIOC|0xfe) |
|
|
|
#define CZ_DEF_POLL (HZ/25) |
|
|
|
#define MAX_BOARD 4 /* Max number of boards */ |
|
#define MAX_DEV 256 /* Max number of ports total */ |
|
#define CYZ_MAX_SPEED 921600 |
|
|
|
#define CYZ_FIFO_SIZE 16 |
|
|
|
#define CYZ_BOOT_NWORDS 0x100 |
|
struct CYZ_BOOT_CTRL { |
|
unsigned short nboard; |
|
int status[MAX_BOARD]; |
|
int nchannel[MAX_BOARD]; |
|
int fw_rev[MAX_BOARD]; |
|
unsigned long offset; |
|
unsigned long data[CYZ_BOOT_NWORDS]; |
|
}; |
|
|
|
|
|
#ifndef DP_WINDOW_SIZE |
|
/* |
|
* Memory Window Sizes |
|
*/ |
|
|
|
#define DP_WINDOW_SIZE (0x00080000) /* window size 512 Kb */ |
|
#define ZE_DP_WINDOW_SIZE (0x00100000) /* window size 1 Mb (Ze and |
|
8Zo V.2 */ |
|
#define CTRL_WINDOW_SIZE (0x00000080) /* runtime regs 128 bytes */ |
|
|
|
/* |
|
* CUSTOM_REG - Cyclom-Z/PCI Custom Registers Set. The driver |
|
* normally will access only interested on the fpga_id, fpga_version, |
|
* start_cpu and stop_cpu. |
|
*/ |
|
|
|
struct CUSTOM_REG { |
|
__u32 fpga_id; /* FPGA Identification Register */ |
|
__u32 fpga_version; /* FPGA Version Number Register */ |
|
__u32 cpu_start; /* CPU start Register (write) */ |
|
__u32 cpu_stop; /* CPU stop Register (write) */ |
|
__u32 misc_reg; /* Miscellaneous Register */ |
|
__u32 idt_mode; /* IDT mode Register */ |
|
__u32 uart_irq_status; /* UART IRQ status Register */ |
|
__u32 clear_timer0_irq; /* Clear timer interrupt Register */ |
|
__u32 clear_timer1_irq; /* Clear timer interrupt Register */ |
|
__u32 clear_timer2_irq; /* Clear timer interrupt Register */ |
|
__u32 test_register; /* Test Register */ |
|
__u32 test_count; /* Test Count Register */ |
|
__u32 timer_select; /* Timer select register */ |
|
__u32 pr_uart_irq_status; /* Prioritized UART IRQ stat Reg */ |
|
__u32 ram_wait_state; /* RAM wait-state Register */ |
|
__u32 uart_wait_state; /* UART wait-state Register */ |
|
__u32 timer_wait_state; /* timer wait-state Register */ |
|
__u32 ack_wait_state; /* ACK wait State Register */ |
|
}; |
|
|
|
/* |
|
* RUNTIME_9060 - PLX PCI9060ES local configuration and shared runtime |
|
* registers. This structure can be used to access the 9060 registers |
|
* (memory mapped). |
|
*/ |
|
|
|
struct RUNTIME_9060 { |
|
__u32 loc_addr_range; /* 00h - Local Address Range */ |
|
__u32 loc_addr_base; /* 04h - Local Address Base */ |
|
__u32 loc_arbitr; /* 08h - Local Arbitration */ |
|
__u32 endian_descr; /* 0Ch - Big/Little Endian Descriptor */ |
|
__u32 loc_rom_range; /* 10h - Local ROM Range */ |
|
__u32 loc_rom_base; /* 14h - Local ROM Base */ |
|
__u32 loc_bus_descr; /* 18h - Local Bus descriptor */ |
|
__u32 loc_range_mst; /* 1Ch - Local Range for Master to PCI */ |
|
__u32 loc_base_mst; /* 20h - Local Base for Master PCI */ |
|
__u32 loc_range_io; /* 24h - Local Range for Master IO */ |
|
__u32 pci_base_mst; /* 28h - PCI Base for Master PCI */ |
|
__u32 pci_conf_io; /* 2Ch - PCI configuration for Master IO */ |
|
__u32 filler1; /* 30h */ |
|
__u32 filler2; /* 34h */ |
|
__u32 filler3; /* 38h */ |
|
__u32 filler4; /* 3Ch */ |
|
__u32 mail_box_0; /* 40h - Mail Box 0 */ |
|
__u32 mail_box_1; /* 44h - Mail Box 1 */ |
|
__u32 mail_box_2; /* 48h - Mail Box 2 */ |
|
__u32 mail_box_3; /* 4Ch - Mail Box 3 */ |
|
__u32 filler5; /* 50h */ |
|
__u32 filler6; /* 54h */ |
|
__u32 filler7; /* 58h */ |
|
__u32 filler8; /* 5Ch */ |
|
__u32 pci_doorbell; /* 60h - PCI to Local Doorbell */ |
|
__u32 loc_doorbell; /* 64h - Local to PCI Doorbell */ |
|
__u32 intr_ctrl_stat; /* 68h - Interrupt Control/Status */ |
|
__u32 init_ctrl; /* 6Ch - EEPROM control, Init Control, etc */ |
|
}; |
|
|
|
/* Values for the Local Base Address re-map register */ |
|
|
|
#define WIN_RAM 0x00000001L /* set the sliding window to RAM */ |
|
#define WIN_CREG 0x14000001L /* set the window to custom Registers */ |
|
|
|
/* Values timer select registers */ |
|
|
|
#define TIMER_BY_1M 0x00 /* clock divided by 1M */ |
|
#define TIMER_BY_256K 0x01 /* clock divided by 256k */ |
|
#define TIMER_BY_128K 0x02 /* clock divided by 128k */ |
|
#define TIMER_BY_32K 0x03 /* clock divided by 32k */ |
|
|
|
/****************** ****************** *******************/ |
|
#endif |
|
|
|
#ifndef ZFIRM_ID |
|
/* #include "zfwint.h" */ |
|
/****************** ****************** *******************/ |
|
/* |
|
* This file contains the definitions for interfacing with the |
|
* Cyclom-Z ZFIRM Firmware. |
|
*/ |
|
|
|
/* General Constant definitions */ |
|
|
|
#define MAX_CHAN 64 /* max number of channels per board */ |
|
|
|
/* firmware id structure (set after boot) */ |
|
|
|
#define ID_ADDRESS 0x00000180L /* signature/pointer address */ |
|
#define ZFIRM_ID 0x5557465AL /* ZFIRM/U signature */ |
|
#define ZFIRM_HLT 0x59505B5CL /* ZFIRM needs external power supply */ |
|
#define ZFIRM_RST 0x56040674L /* RST signal (due to FW reset) */ |
|
|
|
#define ZF_TINACT_DEF 1000 /* default inactivity timeout |
|
(1000 ms) */ |
|
#define ZF_TINACT ZF_TINACT_DEF |
|
|
|
struct FIRM_ID { |
|
__u32 signature; /* ZFIRM/U signature */ |
|
__u32 zfwctrl_addr; /* pointer to ZFW_CTRL structure */ |
|
}; |
|
|
|
/* Op. System id */ |
|
|
|
#define C_OS_LINUX 0x00000030 /* generic Linux system */ |
|
|
|
/* channel op_mode */ |
|
|
|
#define C_CH_DISABLE 0x00000000 /* channel is disabled */ |
|
#define C_CH_TXENABLE 0x00000001 /* channel Tx enabled */ |
|
#define C_CH_RXENABLE 0x00000002 /* channel Rx enabled */ |
|
#define C_CH_ENABLE 0x00000003 /* channel Tx/Rx enabled */ |
|
#define C_CH_LOOPBACK 0x00000004 /* Loopback mode */ |
|
|
|
/* comm_parity - parity */ |
|
|
|
#define C_PR_NONE 0x00000000 /* None */ |
|
#define C_PR_ODD 0x00000001 /* Odd */ |
|
#define C_PR_EVEN 0x00000002 /* Even */ |
|
#define C_PR_MARK 0x00000004 /* Mark */ |
|
#define C_PR_SPACE 0x00000008 /* Space */ |
|
#define C_PR_PARITY 0x000000ff |
|
|
|
#define C_PR_DISCARD 0x00000100 /* discard char with frame/par error */ |
|
#define C_PR_IGNORE 0x00000200 /* ignore frame/par error */ |
|
|
|
/* comm_data_l - data length and stop bits */ |
|
|
|
#define C_DL_CS5 0x00000001 |
|
#define C_DL_CS6 0x00000002 |
|
#define C_DL_CS7 0x00000004 |
|
#define C_DL_CS8 0x00000008 |
|
#define C_DL_CS 0x0000000f |
|
#define C_DL_1STOP 0x00000010 |
|
#define C_DL_15STOP 0x00000020 |
|
#define C_DL_2STOP 0x00000040 |
|
#define C_DL_STOP 0x000000f0 |
|
|
|
/* interrupt enabling/status */ |
|
|
|
#define C_IN_DISABLE 0x00000000 /* zero, disable interrupts */ |
|
#define C_IN_TXBEMPTY 0x00000001 /* tx buffer empty */ |
|
#define C_IN_TXLOWWM 0x00000002 /* tx buffer below LWM */ |
|
#define C_IN_RXHIWM 0x00000010 /* rx buffer above HWM */ |
|
#define C_IN_RXNNDT 0x00000020 /* rx no new data timeout */ |
|
#define C_IN_MDCD 0x00000100 /* modem DCD change */ |
|
#define C_IN_MDSR 0x00000200 /* modem DSR change */ |
|
#define C_IN_MRI 0x00000400 /* modem RI change */ |
|
#define C_IN_MCTS 0x00000800 /* modem CTS change */ |
|
#define C_IN_RXBRK 0x00001000 /* Break received */ |
|
#define C_IN_PR_ERROR 0x00002000 /* parity error */ |
|
#define C_IN_FR_ERROR 0x00004000 /* frame error */ |
|
#define C_IN_OVR_ERROR 0x00008000 /* overrun error */ |
|
#define C_IN_RXOFL 0x00010000 /* RX buffer overflow */ |
|
#define C_IN_IOCTLW 0x00020000 /* I/O control w/ wait */ |
|
#define C_IN_MRTS 0x00040000 /* modem RTS drop */ |
|
#define C_IN_ICHAR 0x00080000 |
|
|
|
/* flow control */ |
|
|
|
#define C_FL_OXX 0x00000001 /* output Xon/Xoff flow control */ |
|
#define C_FL_IXX 0x00000002 /* output Xon/Xoff flow control */ |
|
#define C_FL_OIXANY 0x00000004 /* output Xon/Xoff (any xon) */ |
|
#define C_FL_SWFLOW 0x0000000f |
|
|
|
/* flow status */ |
|
|
|
#define C_FS_TXIDLE 0x00000000 /* no Tx data in the buffer or UART */ |
|
#define C_FS_SENDING 0x00000001 /* UART is sending data */ |
|
#define C_FS_SWFLOW 0x00000002 /* Tx is stopped by received Xoff */ |
|
|
|
/* rs_control/rs_status RS-232 signals */ |
|
|
|
#define C_RS_PARAM 0x80000000 /* Indicates presence of parameter in |
|
IOCTLM command */ |
|
#define C_RS_RTS 0x00000001 /* RTS */ |
|
#define C_RS_DTR 0x00000004 /* DTR */ |
|
#define C_RS_DCD 0x00000100 /* CD */ |
|
#define C_RS_DSR 0x00000200 /* DSR */ |
|
#define C_RS_RI 0x00000400 /* RI */ |
|
#define C_RS_CTS 0x00000800 /* CTS */ |
|
|
|
/* commands Host <-> Board */ |
|
|
|
#define C_CM_RESET 0x01 /* reset/flush buffers */ |
|
#define C_CM_IOCTL 0x02 /* re-read CH_CTRL */ |
|
#define C_CM_IOCTLW 0x03 /* re-read CH_CTRL, intr when done */ |
|
#define C_CM_IOCTLM 0x04 /* RS-232 outputs change */ |
|
#define C_CM_SENDXOFF 0x10 /* send Xoff */ |
|
#define C_CM_SENDXON 0x11 /* send Xon */ |
|
#define C_CM_CLFLOW 0x12 /* Clear flow control (resume) */ |
|
#define C_CM_SENDBRK 0x41 /* send break */ |
|
#define C_CM_INTBACK 0x42 /* Interrupt back */ |
|
#define C_CM_SET_BREAK 0x43 /* Tx break on */ |
|
#define C_CM_CLR_BREAK 0x44 /* Tx break off */ |
|
#define C_CM_CMD_DONE 0x45 /* Previous command done */ |
|
#define C_CM_INTBACK2 0x46 /* Alternate Interrupt back */ |
|
#define C_CM_TINACT 0x51 /* set inactivity detection */ |
|
#define C_CM_IRQ_ENBL 0x52 /* enable generation of interrupts */ |
|
#define C_CM_IRQ_DSBL 0x53 /* disable generation of interrupts */ |
|
#define C_CM_ACK_ENBL 0x54 /* enable acknowledged interrupt mode */ |
|
#define C_CM_ACK_DSBL 0x55 /* disable acknowledged intr mode */ |
|
#define C_CM_FLUSH_RX 0x56 /* flushes Rx buffer */ |
|
#define C_CM_FLUSH_TX 0x57 /* flushes Tx buffer */ |
|
#define C_CM_Q_ENABLE 0x58 /* enables queue access from the |
|
driver */ |
|
#define C_CM_Q_DISABLE 0x59 /* disables queue access from the |
|
driver */ |
|
|
|
#define C_CM_TXBEMPTY 0x60 /* Tx buffer is empty */ |
|
#define C_CM_TXLOWWM 0x61 /* Tx buffer low water mark */ |
|
#define C_CM_RXHIWM 0x62 /* Rx buffer high water mark */ |
|
#define C_CM_RXNNDT 0x63 /* rx no new data timeout */ |
|
#define C_CM_TXFEMPTY 0x64 |
|
#define C_CM_ICHAR 0x65 |
|
#define C_CM_MDCD 0x70 /* modem DCD change */ |
|
#define C_CM_MDSR 0x71 /* modem DSR change */ |
|
#define C_CM_MRI 0x72 /* modem RI change */ |
|
#define C_CM_MCTS 0x73 /* modem CTS change */ |
|
#define C_CM_MRTS 0x74 /* modem RTS drop */ |
|
#define C_CM_RXBRK 0x84 /* Break received */ |
|
#define C_CM_PR_ERROR 0x85 /* Parity error */ |
|
#define C_CM_FR_ERROR 0x86 /* Frame error */ |
|
#define C_CM_OVR_ERROR 0x87 /* Overrun error */ |
|
#define C_CM_RXOFL 0x88 /* RX buffer overflow */ |
|
#define C_CM_CMDERROR 0x90 /* command error */ |
|
#define C_CM_FATAL 0x91 /* fatal error */ |
|
#define C_CM_HW_RESET 0x92 /* reset board */ |
|
|
|
/* |
|
* CH_CTRL - This per port structure contains all parameters |
|
* that control an specific port. It can be seen as the |
|
* configuration registers of a "super-serial-controller". |
|
*/ |
|
|
|
struct CH_CTRL { |
|
__u32 op_mode; /* operation mode */ |
|
__u32 intr_enable; /* interrupt masking */ |
|
__u32 sw_flow; /* SW flow control */ |
|
__u32 flow_status; /* output flow status */ |
|
__u32 comm_baud; /* baud rate - numerically specified */ |
|
__u32 comm_parity; /* parity */ |
|
__u32 comm_data_l; /* data length/stop */ |
|
__u32 comm_flags; /* other flags */ |
|
__u32 hw_flow; /* HW flow control */ |
|
__u32 rs_control; /* RS-232 outputs */ |
|
__u32 rs_status; /* RS-232 inputs */ |
|
__u32 flow_xon; /* xon char */ |
|
__u32 flow_xoff; /* xoff char */ |
|
__u32 hw_overflow; /* hw overflow counter */ |
|
__u32 sw_overflow; /* sw overflow counter */ |
|
__u32 comm_error; /* frame/parity error counter */ |
|
__u32 ichar; |
|
__u32 filler[7]; |
|
}; |
|
|
|
|
|
/* |
|
* BUF_CTRL - This per channel structure contains |
|
* all Tx and Rx buffer control for a given channel. |
|
*/ |
|
|
|
struct BUF_CTRL { |
|
__u32 flag_dma; /* buffers are in Host memory */ |
|
__u32 tx_bufaddr; /* address of the tx buffer */ |
|
__u32 tx_bufsize; /* tx buffer size */ |
|
__u32 tx_threshold; /* tx low water mark */ |
|
__u32 tx_get; /* tail index tx buf */ |
|
__u32 tx_put; /* head index tx buf */ |
|
__u32 rx_bufaddr; /* address of the rx buffer */ |
|
__u32 rx_bufsize; /* rx buffer size */ |
|
__u32 rx_threshold; /* rx high water mark */ |
|
__u32 rx_get; /* tail index rx buf */ |
|
__u32 rx_put; /* head index rx buf */ |
|
__u32 filler[5]; /* filler to align structures */ |
|
}; |
|
|
|
/* |
|
* BOARD_CTRL - This per board structure contains all global |
|
* control fields related to the board. |
|
*/ |
|
|
|
struct BOARD_CTRL { |
|
|
|
/* static info provided by the on-board CPU */ |
|
__u32 n_channel; /* number of channels */ |
|
__u32 fw_version; /* firmware version */ |
|
|
|
/* static info provided by the driver */ |
|
__u32 op_system; /* op_system id */ |
|
__u32 dr_version; /* driver version */ |
|
|
|
/* board control area */ |
|
__u32 inactivity; /* inactivity control */ |
|
|
|
/* host to FW commands */ |
|
__u32 hcmd_channel; /* channel number */ |
|
__u32 hcmd_param; /* pointer to parameters */ |
|
|
|
/* FW to Host commands */ |
|
__u32 fwcmd_channel; /* channel number */ |
|
__u32 fwcmd_param; /* pointer to parameters */ |
|
__u32 zf_int_queue_addr; /* offset for INT_QUEUE structure */ |
|
|
|
/* filler so the structures are aligned */ |
|
__u32 filler[6]; |
|
}; |
|
|
|
/* Host Interrupt Queue */ |
|
|
|
#define QUEUE_SIZE (10*MAX_CHAN) |
|
|
|
struct INT_QUEUE { |
|
unsigned char intr_code[QUEUE_SIZE]; |
|
unsigned long channel[QUEUE_SIZE]; |
|
unsigned long param[QUEUE_SIZE]; |
|
unsigned long put; |
|
unsigned long get; |
|
}; |
|
|
|
/* |
|
* ZFW_CTRL - This is the data structure that includes all other |
|
* data structures used by the Firmware. |
|
*/ |
|
|
|
struct ZFW_CTRL { |
|
struct BOARD_CTRL board_ctrl; |
|
struct CH_CTRL ch_ctrl[MAX_CHAN]; |
|
struct BUF_CTRL buf_ctrl[MAX_CHAN]; |
|
}; |
|
|
|
/****************** ****************** *******************/ |
|
#endif |
|
|
|
#endif /* _UAPI_LINUX_CYCLADES_H */
|
|
|