mirror of https://github.com/Qortal/Brooklyn
You can not select more than 25 topics
Topics must start with a letter or number, can include dashes ('-') and can be up to 35 characters long.
322 lines
10 KiB
322 lines
10 KiB
/* SPDX-License-Identifier: GPL-2.0 */ |
|
/* |
|
* HD-audio controller (Azalia) registers and helpers |
|
* |
|
* For traditional reasons, we still use azx_ prefix here |
|
*/ |
|
|
|
#ifndef __SOUND_HDA_REGISTER_H |
|
#define __SOUND_HDA_REGISTER_H |
|
|
|
#include <linux/io.h> |
|
#include <sound/hdaudio.h> |
|
|
|
#define AZX_REG_GCAP 0x00 |
|
#define AZX_GCAP_64OK (1 << 0) /* 64bit address support */ |
|
#define AZX_GCAP_NSDO (3 << 1) /* # of serial data out signals */ |
|
#define AZX_GCAP_BSS (31 << 3) /* # of bidirectional streams */ |
|
#define AZX_GCAP_ISS (15 << 8) /* # of input streams */ |
|
#define AZX_GCAP_OSS (15 << 12) /* # of output streams */ |
|
#define AZX_REG_VMIN 0x02 |
|
#define AZX_REG_VMAJ 0x03 |
|
#define AZX_REG_OUTPAY 0x04 |
|
#define AZX_REG_INPAY 0x06 |
|
#define AZX_REG_GCTL 0x08 |
|
#define AZX_GCTL_RESET (1 << 0) /* controller reset */ |
|
#define AZX_GCTL_FCNTRL (1 << 1) /* flush control */ |
|
#define AZX_GCTL_UNSOL (1 << 8) /* accept unsol. response enable */ |
|
#define AZX_REG_WAKEEN 0x0c |
|
#define AZX_REG_STATESTS 0x0e |
|
#define AZX_REG_GSTS 0x10 |
|
#define AZX_GSTS_FSTS (1 << 1) /* flush status */ |
|
#define AZX_REG_GCAP2 0x12 |
|
#define AZX_REG_LLCH 0x14 |
|
#define AZX_REG_OUTSTRMPAY 0x18 |
|
#define AZX_REG_INSTRMPAY 0x1A |
|
#define AZX_REG_INTCTL 0x20 |
|
#define AZX_REG_INTSTS 0x24 |
|
#define AZX_REG_WALLCLK 0x30 /* 24Mhz source */ |
|
#define AZX_REG_OLD_SSYNC 0x34 /* SSYNC for old ICH */ |
|
#define AZX_REG_SSYNC 0x38 |
|
#define AZX_REG_CORBLBASE 0x40 |
|
#define AZX_REG_CORBUBASE 0x44 |
|
#define AZX_REG_CORBWP 0x48 |
|
#define AZX_REG_CORBRP 0x4a |
|
#define AZX_CORBRP_RST (1 << 15) /* read pointer reset */ |
|
#define AZX_REG_CORBCTL 0x4c |
|
#define AZX_CORBCTL_RUN (1 << 1) /* enable DMA */ |
|
#define AZX_CORBCTL_CMEIE (1 << 0) /* enable memory error irq */ |
|
#define AZX_REG_CORBSTS 0x4d |
|
#define AZX_CORBSTS_CMEI (1 << 0) /* memory error indication */ |
|
#define AZX_REG_CORBSIZE 0x4e |
|
|
|
#define AZX_REG_RIRBLBASE 0x50 |
|
#define AZX_REG_RIRBUBASE 0x54 |
|
#define AZX_REG_RIRBWP 0x58 |
|
#define AZX_RIRBWP_RST (1 << 15) /* write pointer reset */ |
|
#define AZX_REG_RINTCNT 0x5a |
|
#define AZX_REG_RIRBCTL 0x5c |
|
#define AZX_RBCTL_IRQ_EN (1 << 0) /* enable IRQ */ |
|
#define AZX_RBCTL_DMA_EN (1 << 1) /* enable DMA */ |
|
#define AZX_RBCTL_OVERRUN_EN (1 << 2) /* enable overrun irq */ |
|
#define AZX_REG_RIRBSTS 0x5d |
|
#define AZX_RBSTS_IRQ (1 << 0) /* response irq */ |
|
#define AZX_RBSTS_OVERRUN (1 << 2) /* overrun irq */ |
|
#define AZX_REG_RIRBSIZE 0x5e |
|
|
|
#define AZX_REG_IC 0x60 |
|
#define AZX_REG_IR 0x64 |
|
#define AZX_REG_IRS 0x68 |
|
#define AZX_IRS_VALID (1<<1) |
|
#define AZX_IRS_BUSY (1<<0) |
|
|
|
#define AZX_REG_DPLBASE 0x70 |
|
#define AZX_REG_DPUBASE 0x74 |
|
#define AZX_DPLBASE_ENABLE 0x1 /* Enable position buffer */ |
|
|
|
/* SD offset: SDI0=0x80, SDI1=0xa0, ... SDO3=0x160 */ |
|
enum { SDI0, SDI1, SDI2, SDI3, SDO0, SDO1, SDO2, SDO3 }; |
|
|
|
/* stream register offsets from stream base */ |
|
#define AZX_REG_SD_CTL 0x00 |
|
#define AZX_REG_SD_CTL_3B 0x02 /* 3rd byte of SD_CTL register */ |
|
#define AZX_REG_SD_STS 0x03 |
|
#define AZX_REG_SD_LPIB 0x04 |
|
#define AZX_REG_SD_CBL 0x08 |
|
#define AZX_REG_SD_LVI 0x0c |
|
#define AZX_REG_SD_FIFOW 0x0e |
|
#define AZX_REG_SD_FIFOSIZE 0x10 |
|
#define AZX_REG_SD_FORMAT 0x12 |
|
#define AZX_REG_SD_FIFOL 0x14 |
|
#define AZX_REG_SD_BDLPL 0x18 |
|
#define AZX_REG_SD_BDLPU 0x1c |
|
|
|
/* GTS registers */ |
|
#define AZX_REG_LLCH 0x14 |
|
|
|
#define AZX_REG_GTS_BASE 0x520 |
|
|
|
#define AZX_REG_GTSCC (AZX_REG_GTS_BASE + 0x00) |
|
#define AZX_REG_WALFCC (AZX_REG_GTS_BASE + 0x04) |
|
#define AZX_REG_TSCCL (AZX_REG_GTS_BASE + 0x08) |
|
#define AZX_REG_TSCCU (AZX_REG_GTS_BASE + 0x0C) |
|
#define AZX_REG_LLPFOC (AZX_REG_GTS_BASE + 0x14) |
|
#define AZX_REG_LLPCL (AZX_REG_GTS_BASE + 0x18) |
|
#define AZX_REG_LLPCU (AZX_REG_GTS_BASE + 0x1C) |
|
|
|
/* Haswell/Broadwell display HD-A controller Extended Mode registers */ |
|
#define AZX_REG_HSW_EM4 0x100c |
|
#define AZX_REG_HSW_EM5 0x1010 |
|
|
|
/* Skylake/Broxton vendor-specific registers */ |
|
#define AZX_REG_VS_EM1 0x1000 |
|
#define AZX_REG_VS_INRC 0x1004 |
|
#define AZX_REG_VS_OUTRC 0x1008 |
|
#define AZX_REG_VS_FIFOTRK 0x100C |
|
#define AZX_REG_VS_FIFOTRK2 0x1010 |
|
#define AZX_REG_VS_EM2 0x1030 |
|
#define AZX_REG_VS_EM3L 0x1038 |
|
#define AZX_REG_VS_EM3U 0x103C |
|
#define AZX_REG_VS_EM4L 0x1040 |
|
#define AZX_REG_VS_EM4U 0x1044 |
|
#define AZX_REG_VS_LTRP 0x1048 |
|
#define AZX_REG_VS_D0I3C 0x104A |
|
#define AZX_REG_VS_PCE 0x104B |
|
#define AZX_REG_VS_L2MAGC 0x1050 |
|
#define AZX_REG_VS_L2LAHPT 0x1054 |
|
#define AZX_REG_VS_SDXDPIB_XBASE 0x1084 |
|
#define AZX_REG_VS_SDXDPIB_XINTERVAL 0x20 |
|
#define AZX_REG_VS_SDXEFIFOS_XBASE 0x1094 |
|
#define AZX_REG_VS_SDXEFIFOS_XINTERVAL 0x20 |
|
|
|
/* PCI space */ |
|
#define AZX_PCIREG_TCSEL 0x44 |
|
|
|
/* |
|
* other constants |
|
*/ |
|
|
|
/* max number of fragments - we may use more if allocating more pages for BDL */ |
|
#define BDL_SIZE 4096 |
|
#define AZX_MAX_BDL_ENTRIES (BDL_SIZE / 16) |
|
#define AZX_MAX_FRAG 32 |
|
/* max buffer size - no h/w limit, you can increase as you like */ |
|
#define AZX_MAX_BUF_SIZE (1024*1024*1024) |
|
|
|
/* RIRB int mask: overrun[2], response[0] */ |
|
#define RIRB_INT_RESPONSE 0x01 |
|
#define RIRB_INT_OVERRUN 0x04 |
|
#define RIRB_INT_MASK 0x05 |
|
|
|
/* STATESTS int mask: S3,SD2,SD1,SD0 */ |
|
#define STATESTS_INT_MASK ((1 << HDA_MAX_CODECS) - 1) |
|
|
|
/* SD_CTL bits */ |
|
#define SD_CTL_STREAM_RESET 0x01 /* stream reset bit */ |
|
#define SD_CTL_DMA_START 0x02 /* stream DMA start bit */ |
|
#define SD_CTL_STRIPE (3 << 16) /* stripe control */ |
|
#define SD_CTL_TRAFFIC_PRIO (1 << 18) /* traffic priority */ |
|
#define SD_CTL_DIR (1 << 19) /* bi-directional stream */ |
|
#define SD_CTL_STREAM_TAG_MASK (0xf << 20) |
|
#define SD_CTL_STREAM_TAG_SHIFT 20 |
|
|
|
/* SD_CTL and SD_STS */ |
|
#define SD_INT_DESC_ERR 0x10 /* descriptor error interrupt */ |
|
#define SD_INT_FIFO_ERR 0x08 /* FIFO error interrupt */ |
|
#define SD_INT_COMPLETE 0x04 /* completion interrupt */ |
|
#define SD_INT_MASK (SD_INT_DESC_ERR|SD_INT_FIFO_ERR|\ |
|
SD_INT_COMPLETE) |
|
#define SD_CTL_STRIPE_MASK 0x3 /* stripe control mask */ |
|
|
|
/* SD_STS */ |
|
#define SD_STS_FIFO_READY 0x20 /* FIFO ready */ |
|
|
|
/* INTCTL and INTSTS */ |
|
#define AZX_INT_ALL_STREAM 0xff /* all stream interrupts */ |
|
#define AZX_INT_CTRL_EN 0x40000000 /* controller interrupt enable bit */ |
|
#define AZX_INT_GLOBAL_EN 0x80000000 /* global interrupt enable bit */ |
|
|
|
/* below are so far hardcoded - should read registers in future */ |
|
#define AZX_MAX_CORB_ENTRIES 256 |
|
#define AZX_MAX_RIRB_ENTRIES 256 |
|
|
|
/* Capability header Structure */ |
|
#define AZX_REG_CAP_HDR 0x0 |
|
#define AZX_CAP_HDR_VER_OFF 28 |
|
#define AZX_CAP_HDR_VER_MASK (0xF << AZX_CAP_HDR_VER_OFF) |
|
#define AZX_CAP_HDR_ID_OFF 16 |
|
#define AZX_CAP_HDR_ID_MASK (0xFFF << AZX_CAP_HDR_ID_OFF) |
|
#define AZX_CAP_HDR_NXT_PTR_MASK 0xFFFF |
|
|
|
/* registers of Software Position Based FIFO Capability Structure */ |
|
#define AZX_SPB_CAP_ID 0x4 |
|
#define AZX_REG_SPB_BASE_ADDR 0x700 |
|
#define AZX_REG_SPB_SPBFCH 0x00 |
|
#define AZX_REG_SPB_SPBFCCTL 0x04 |
|
/* Base used to calculate the iterating register offset */ |
|
#define AZX_SPB_BASE 0x08 |
|
/* Interval used to calculate the iterating register offset */ |
|
#define AZX_SPB_INTERVAL 0x08 |
|
/* SPIB base */ |
|
#define AZX_SPB_SPIB 0x00 |
|
/* SPIB MAXFIFO base*/ |
|
#define AZX_SPB_MAXFIFO 0x04 |
|
|
|
/* registers of Global Time Synchronization Capability Structure */ |
|
#define AZX_GTS_CAP_ID 0x1 |
|
#define AZX_REG_GTS_GTSCH 0x00 |
|
#define AZX_REG_GTS_GTSCD 0x04 |
|
#define AZX_REG_GTS_GTSCTLAC 0x0C |
|
#define AZX_GTS_BASE 0x20 |
|
#define AZX_GTS_INTERVAL 0x20 |
|
|
|
/* registers for Processing Pipe Capability Structure */ |
|
#define AZX_PP_CAP_ID 0x3 |
|
#define AZX_REG_PP_PPCH 0x10 |
|
#define AZX_REG_PP_PPCTL 0x04 |
|
#define AZX_PPCTL_PIE (1<<31) |
|
#define AZX_PPCTL_GPROCEN (1<<30) |
|
/* _X_ = dma engine # and cannot * exceed 29 (per spec max 30 dma engines) */ |
|
#define AZX_PPCTL_PROCEN(_X_) (1<<(_X_)) |
|
|
|
#define AZX_REG_PP_PPSTS 0x08 |
|
|
|
#define AZX_PPHC_BASE 0x10 |
|
#define AZX_PPHC_INTERVAL 0x10 |
|
|
|
#define AZX_REG_PPHCLLPL 0x0 |
|
#define AZX_REG_PPHCLLPU 0x4 |
|
#define AZX_REG_PPHCLDPL 0x8 |
|
#define AZX_REG_PPHCLDPU 0xC |
|
|
|
#define AZX_PPLC_BASE 0x10 |
|
#define AZX_PPLC_MULTI 0x10 |
|
#define AZX_PPLC_INTERVAL 0x10 |
|
|
|
#define AZX_REG_PPLCCTL 0x0 |
|
#define AZX_PPLCCTL_STRM_BITS 4 |
|
#define AZX_PPLCCTL_STRM_SHIFT 20 |
|
#define AZX_REG_MASK(bit_num, offset) \ |
|
(((1 << (bit_num)) - 1) << (offset)) |
|
#define AZX_PPLCCTL_STRM_MASK \ |
|
AZX_REG_MASK(AZX_PPLCCTL_STRM_BITS, AZX_PPLCCTL_STRM_SHIFT) |
|
#define AZX_PPLCCTL_RUN (1<<1) |
|
#define AZX_PPLCCTL_STRST (1<<0) |
|
|
|
#define AZX_REG_PPLCFMT 0x4 |
|
#define AZX_REG_PPLCLLPL 0x8 |
|
#define AZX_REG_PPLCLLPU 0xC |
|
|
|
/* registers for Multiple Links Capability Structure */ |
|
#define AZX_ML_CAP_ID 0x2 |
|
#define AZX_REG_ML_MLCH 0x00 |
|
#define AZX_REG_ML_MLCD 0x04 |
|
#define AZX_ML_BASE 0x40 |
|
#define AZX_ML_INTERVAL 0x40 |
|
|
|
#define AZX_REG_ML_LCAP 0x00 |
|
#define AZX_REG_ML_LCTL 0x04 |
|
#define AZX_REG_ML_LOSIDV 0x08 |
|
#define AZX_REG_ML_LSDIID 0x0C |
|
#define AZX_REG_ML_LPSOO 0x10 |
|
#define AZX_REG_ML_LPSIO 0x12 |
|
#define AZX_REG_ML_LWALFC 0x18 |
|
#define AZX_REG_ML_LOUTPAY 0x20 |
|
#define AZX_REG_ML_LINPAY 0x30 |
|
|
|
/* bit0 is reserved, with BIT(1) mapping to stream1 */ |
|
#define ML_LOSIDV_STREAM_MASK 0xFFFE |
|
|
|
#define ML_LCTL_SCF_MASK 0xF |
|
#define AZX_MLCTL_SPA (0x1 << 16) |
|
#define AZX_MLCTL_CPA (0x1 << 23) |
|
#define AZX_MLCTL_SPA_SHIFT 16 |
|
#define AZX_MLCTL_CPA_SHIFT 23 |
|
|
|
/* registers for DMA Resume Capability Structure */ |
|
#define AZX_DRSM_CAP_ID 0x5 |
|
#define AZX_REG_DRSM_CTL 0x4 |
|
/* Base used to calculate the iterating register offset */ |
|
#define AZX_DRSM_BASE 0x08 |
|
/* Interval used to calculate the iterating register offset */ |
|
#define AZX_DRSM_INTERVAL 0x08 |
|
|
|
/* Global time synchronization registers */ |
|
#define GTSCC_TSCCD_MASK 0x80000000 |
|
#define GTSCC_TSCCD_SHIFT BIT(31) |
|
#define GTSCC_TSCCI_MASK 0x20 |
|
#define GTSCC_CDMAS_DMA_DIR_SHIFT 4 |
|
|
|
#define WALFCC_CIF_MASK 0x1FF |
|
#define WALFCC_FN_SHIFT 9 |
|
#define HDA_CLK_CYCLES_PER_FRAME 512 |
|
|
|
/* |
|
* An error occurs near frame "rollover". The clocks in frame value indicates |
|
* whether this error may have occurred. Here we use the value of 10. Please |
|
* see the errata for the right number [<10] |
|
*/ |
|
#define HDA_MAX_CYCLE_VALUE 499 |
|
#define HDA_MAX_CYCLE_OFFSET 10 |
|
#define HDA_MAX_CYCLE_READ_RETRY 10 |
|
|
|
#define TSCCU_CCU_SHIFT 32 |
|
#define LLPC_CCU_SHIFT 32 |
|
|
|
|
|
/* |
|
* helpers to read the stream position |
|
*/ |
|
static inline unsigned int |
|
snd_hdac_stream_get_pos_lpib(struct hdac_stream *stream) |
|
{ |
|
return snd_hdac_stream_readl(stream, SD_LPIB); |
|
} |
|
|
|
static inline unsigned int |
|
snd_hdac_stream_get_pos_posbuf(struct hdac_stream *stream) |
|
{ |
|
return le32_to_cpu(*stream->posbuf); |
|
} |
|
|
|
#endif /* __SOUND_HDA_REGISTER_H */
|
|
|