mirror of https://github.com/Qortal/Brooklyn
You can not select more than 25 topics
Topics must start with a letter or number, can include dashes ('-') and can be up to 35 characters long.
390 lines
11 KiB
390 lines
11 KiB
// SPDX-License-Identifier: GPL-2.0 |
|
/* |
|
* linux/arch/sh/boards/magicpanel/setup.c |
|
* |
|
* Copyright (C) 2007 Markus Brunner, Mark Jonas |
|
* |
|
* Magic Panel Release 2 board setup |
|
*/ |
|
#include <linux/init.h> |
|
#include <linux/irq.h> |
|
#include <linux/platform_device.h> |
|
#include <linux/delay.h> |
|
#include <linux/gpio.h> |
|
#include <linux/regulator/fixed.h> |
|
#include <linux/regulator/machine.h> |
|
#include <linux/smsc911x.h> |
|
#include <linux/mtd/mtd.h> |
|
#include <linux/mtd/partitions.h> |
|
#include <linux/mtd/physmap.h> |
|
#include <linux/mtd/map.h> |
|
#include <linux/sh_intc.h> |
|
#include <mach/magicpanelr2.h> |
|
#include <asm/heartbeat.h> |
|
#include <cpu/sh7720.h> |
|
|
|
/* Dummy supplies, where voltage doesn't matter */ |
|
static struct regulator_consumer_supply dummy_supplies[] = { |
|
REGULATOR_SUPPLY("vddvario", "smsc911x"), |
|
REGULATOR_SUPPLY("vdd33a", "smsc911x"), |
|
}; |
|
|
|
#define LAN9115_READY (__raw_readl(0xA8000084UL) & 0x00000001UL) |
|
|
|
/* Wait until reset finished. Timeout is 100ms. */ |
|
static int __init ethernet_reset_finished(void) |
|
{ |
|
int i; |
|
|
|
if (LAN9115_READY) |
|
return 1; |
|
|
|
for (i = 0; i < 10; ++i) { |
|
mdelay(10); |
|
if (LAN9115_READY) |
|
return 1; |
|
} |
|
|
|
return 0; |
|
} |
|
|
|
static void __init reset_ethernet(void) |
|
{ |
|
/* PMDR: LAN_RESET=on */ |
|
CLRBITS_OUTB(0x10, PORT_PMDR); |
|
|
|
udelay(200); |
|
|
|
/* PMDR: LAN_RESET=off */ |
|
SETBITS_OUTB(0x10, PORT_PMDR); |
|
} |
|
|
|
static void __init setup_chip_select(void) |
|
{ |
|
/* CS2: LAN (0x08000000 - 0x0bffffff) */ |
|
/* no idle cycles, normal space, 8 bit data bus */ |
|
__raw_writel(0x36db0400, CS2BCR); |
|
/* (SW:1.5 WR:3 HW:1.5), ext. wait */ |
|
__raw_writel(0x000003c0, CS2WCR); |
|
|
|
/* CS4: CAN1 (0xb0000000 - 0xb3ffffff) */ |
|
/* no idle cycles, normal space, 8 bit data bus */ |
|
__raw_writel(0x00000200, CS4BCR); |
|
/* (SW:1.5 WR:3 HW:1.5), ext. wait */ |
|
__raw_writel(0x00100981, CS4WCR); |
|
|
|
/* CS5a: CAN2 (0xb4000000 - 0xb5ffffff) */ |
|
/* no idle cycles, normal space, 8 bit data bus */ |
|
__raw_writel(0x00000200, CS5ABCR); |
|
/* (SW:1.5 WR:3 HW:1.5), ext. wait */ |
|
__raw_writel(0x00100981, CS5AWCR); |
|
|
|
/* CS5b: CAN3 (0xb6000000 - 0xb7ffffff) */ |
|
/* no idle cycles, normal space, 8 bit data bus */ |
|
__raw_writel(0x00000200, CS5BBCR); |
|
/* (SW:1.5 WR:3 HW:1.5), ext. wait */ |
|
__raw_writel(0x00100981, CS5BWCR); |
|
|
|
/* CS6a: Rotary (0xb8000000 - 0xb9ffffff) */ |
|
/* no idle cycles, normal space, 8 bit data bus */ |
|
__raw_writel(0x00000200, CS6ABCR); |
|
/* (SW:1.5 WR:3 HW:1.5), no ext. wait */ |
|
__raw_writel(0x001009C1, CS6AWCR); |
|
} |
|
|
|
static void __init setup_port_multiplexing(void) |
|
{ |
|
/* A7 GPO(LED8); A6 GPO(LED7); A5 GPO(LED6); A4 GPO(LED5); |
|
* A3 GPO(LED4); A2 GPO(LED3); A1 GPO(LED2); A0 GPO(LED1); |
|
*/ |
|
__raw_writew(0x5555, PORT_PACR); /* 01 01 01 01 01 01 01 01 */ |
|
|
|
/* B7 GPO(RST4); B6 GPO(RST3); B5 GPO(RST2); B4 GPO(RST1); |
|
* B3 GPO(PB3); B2 GPO(PB2); B1 GPO(PB1); B0 GPO(PB0); |
|
*/ |
|
__raw_writew(0x5555, PORT_PBCR); /* 01 01 01 01 01 01 01 01 */ |
|
|
|
/* C7 GPO(PC7); C6 GPO(PC6); C5 GPO(PC5); C4 GPO(PC4); |
|
* C3 LCD_DATA3; C2 LCD_DATA2; C1 LCD_DATA1; C0 LCD_DATA0; |
|
*/ |
|
__raw_writew(0x5500, PORT_PCCR); /* 01 01 01 01 00 00 00 00 */ |
|
|
|
/* D7 GPO(PD7); D6 GPO(PD6); D5 GPO(PD5); D4 GPO(PD4); |
|
* D3 GPO(PD3); D2 GPO(PD2); D1 GPO(PD1); D0 GPO(PD0); |
|
*/ |
|
__raw_writew(0x5555, PORT_PDCR); /* 01 01 01 01 01 01 01 01 */ |
|
|
|
/* E7 (x); E6 GPI(nu); E5 GPI(nu); E4 LCD_M_DISP; |
|
* E3 LCD_CL1; E2 LCD_CL2; E1 LCD_DON; E0 LCD_FLM; |
|
*/ |
|
__raw_writew(0x3C00, PORT_PECR); /* 00 11 11 00 00 00 00 00 */ |
|
|
|
/* F7 (x); F6 DA1(VLCD); F5 DA0(nc); F4 AN3; |
|
* F3 AN2(MID_AD); F2 AN1(EARTH_AD); F1 AN0(TEMP); F0 GPI+(nc); |
|
*/ |
|
__raw_writew(0x0002, PORT_PFCR); /* 00 00 00 00 00 00 00 10 */ |
|
|
|
/* G7 (x); G6 IRQ5(TOUCH_BUSY); G5 IRQ4(TOUCH_IRQ); G4 GPI(KEY2); |
|
* G3 GPI(KEY1); G2 GPO(LED11); G1 GPO(LED10); G0 GPO(LED9); |
|
*/ |
|
__raw_writew(0x03D5, PORT_PGCR); /* 00 00 00 11 11 01 01 01 */ |
|
|
|
/* H7 (x); H6 /RAS(BRAS); H5 /CAS(BCAS); H4 CKE(BCKE); |
|
* H3 GPO(EARTH_OFF); H2 GPO(EARTH_TEST); H1 USB2_PWR; H0 USB1_PWR; |
|
*/ |
|
__raw_writew(0x0050, PORT_PHCR); /* 00 00 00 00 01 01 00 00 */ |
|
|
|
/* J7 (x); J6 AUDCK; J5 ASEBRKAK; J4 AUDATA3; |
|
* J3 AUDATA2; J2 AUDATA1; J1 AUDATA0; J0 AUDSYNC; |
|
*/ |
|
__raw_writew(0x0000, PORT_PJCR); /* 00 00 00 00 00 00 00 00 */ |
|
|
|
/* K7 (x); K6 (x); K5 (x); K4 (x); |
|
* K3 PINT7(/PWR2); K2 PINT6(/PWR1); K1 PINT5(nu); K0 PINT4(FLASH_READY) |
|
*/ |
|
__raw_writew(0x00FF, PORT_PKCR); /* 00 00 00 00 11 11 11 11 */ |
|
|
|
/* L7 TRST; L6 TMS; L5 TDO; L4 TDI; |
|
* L3 TCK; L2 (x); L1 (x); L0 (x); |
|
*/ |
|
__raw_writew(0x0000, PORT_PLCR); /* 00 00 00 00 00 00 00 00 */ |
|
|
|
/* M7 GPO(CURRENT_SINK); M6 GPO(PWR_SWITCH); M5 GPO(LAN_SPEED); |
|
* M4 GPO(LAN_RESET); M3 GPO(BUZZER); M2 GPO(LCD_BL); |
|
* M1 CS5B(CAN3_CS); M0 GPI+(nc); |
|
*/ |
|
__raw_writew(0x5552, PORT_PMCR); /* 01 01 01 01 01 01 00 10 */ |
|
|
|
/* CURRENT_SINK=off, PWR_SWITCH=off, LAN_SPEED=100MBit, |
|
* LAN_RESET=off, BUZZER=off, LCD_BL=off |
|
*/ |
|
#if CONFIG_SH_MAGIC_PANEL_R2_VERSION == 2 |
|
__raw_writeb(0x30, PORT_PMDR); |
|
#elif CONFIG_SH_MAGIC_PANEL_R2_VERSION == 3 |
|
__raw_writeb(0xF0, PORT_PMDR); |
|
#else |
|
#error Unknown revision of PLATFORM_MP_R2 |
|
#endif |
|
|
|
/* P7 (x); P6 (x); P5 (x); |
|
* P4 GPO(nu); P3 IRQ3(LAN_IRQ); P2 IRQ2(CAN3_IRQ); |
|
* P1 IRQ1(CAN2_IRQ); P0 IRQ0(CAN1_IRQ) |
|
*/ |
|
__raw_writew(0x0100, PORT_PPCR); /* 00 00 00 01 00 00 00 00 */ |
|
__raw_writeb(0x10, PORT_PPDR); |
|
|
|
/* R7 A25; R6 A24; R5 A23; R4 A22; |
|
* R3 A21; R2 A20; R1 A19; R0 A0; |
|
*/ |
|
gpio_request(GPIO_FN_A25, NULL); |
|
gpio_request(GPIO_FN_A24, NULL); |
|
gpio_request(GPIO_FN_A23, NULL); |
|
gpio_request(GPIO_FN_A22, NULL); |
|
gpio_request(GPIO_FN_A21, NULL); |
|
gpio_request(GPIO_FN_A20, NULL); |
|
gpio_request(GPIO_FN_A19, NULL); |
|
gpio_request(GPIO_FN_A0, NULL); |
|
|
|
/* S7 (x); S6 (x); S5 (x); S4 GPO(EEPROM_CS2); |
|
* S3 GPO(EEPROM_CS1); S2 SIOF0_TXD; S1 SIOF0_RXD; S0 SIOF0_SCK; |
|
*/ |
|
__raw_writew(0x0140, PORT_PSCR); /* 00 00 00 01 01 00 00 00 */ |
|
|
|
/* T7 (x); T6 (x); T5 (x); T4 COM1_CTS; |
|
* T3 COM1_RTS; T2 COM1_TXD; T1 COM1_RXD; T0 GPO(WDOG) |
|
*/ |
|
__raw_writew(0x0001, PORT_PTCR); /* 00 00 00 00 00 00 00 01 */ |
|
|
|
/* U7 (x); U6 (x); U5 (x); U4 GPI+(/AC_FAULT); |
|
* U3 GPO(TOUCH_CS); U2 TOUCH_TXD; U1 TOUCH_RXD; U0 TOUCH_SCK; |
|
*/ |
|
__raw_writew(0x0240, PORT_PUCR); /* 00 00 00 10 01 00 00 00 */ |
|
|
|
/* V7 (x); V6 (x); V5 (x); V4 GPO(MID2); |
|
* V3 GPO(MID1); V2 CARD_TxD; V1 CARD_RxD; V0 GPI+(/BAT_FAULT); |
|
*/ |
|
__raw_writew(0x0142, PORT_PVCR); /* 00 00 00 01 01 00 00 10 */ |
|
} |
|
|
|
static void __init mpr2_setup(char **cmdline_p) |
|
{ |
|
/* set Pin Select Register A: |
|
* /PCC_CD1, /PCC_CD2, PCC_BVD1, PCC_BVD2, |
|
* /IOIS16, IRQ4, IRQ5, USB1d_SUSPEND |
|
*/ |
|
__raw_writew(0xAABC, PORT_PSELA); |
|
/* set Pin Select Register B: |
|
* /SCIF0_RTS, /SCIF0_CTS, LCD_VCPWC, |
|
* LCD_VEPWC, IIC_SDA, IIC_SCL, Reserved |
|
*/ |
|
__raw_writew(0x3C00, PORT_PSELB); |
|
/* set Pin Select Register C: |
|
* SIOF1_SCK, SIOF1_RxD, SCIF1_RxD, SCIF1_TxD, Reserved |
|
*/ |
|
__raw_writew(0x0000, PORT_PSELC); |
|
/* set Pin Select Register D: Reserved, SIOF1_TxD, Reserved, SIOF1_MCLK, |
|
* Reserved, SIOF1_SYNC, Reserved, SCIF1_SCK, Reserved |
|
*/ |
|
__raw_writew(0x0000, PORT_PSELD); |
|
/* set USB TxRx Control: Reserved, DRV, Reserved, USB_TRANS, USB_SEL */ |
|
__raw_writew(0x0101, PORT_UTRCTL); |
|
/* set USB Clock Control: USSCS, USSTB, Reserved (HighByte always A5) */ |
|
__raw_writew(0xA5C0, PORT_UCLKCR_W); |
|
|
|
setup_chip_select(); |
|
|
|
setup_port_multiplexing(); |
|
|
|
reset_ethernet(); |
|
|
|
printk(KERN_INFO "Magic Panel Release 2 A.%i\n", |
|
CONFIG_SH_MAGIC_PANEL_R2_VERSION); |
|
|
|
if (ethernet_reset_finished() == 0) |
|
printk(KERN_WARNING "Ethernet not ready\n"); |
|
} |
|
|
|
static struct resource smsc911x_resources[] = { |
|
[0] = { |
|
.start = 0xa8000000, |
|
.end = 0xabffffff, |
|
.flags = IORESOURCE_MEM, |
|
}, |
|
[1] = { |
|
.start = evt2irq(0x660), |
|
.end = evt2irq(0x660), |
|
.flags = IORESOURCE_IRQ, |
|
}, |
|
}; |
|
|
|
static struct smsc911x_platform_config smsc911x_config = { |
|
.phy_interface = PHY_INTERFACE_MODE_MII, |
|
.irq_polarity = SMSC911X_IRQ_POLARITY_ACTIVE_LOW, |
|
.irq_type = SMSC911X_IRQ_TYPE_OPEN_DRAIN, |
|
.flags = SMSC911X_USE_32BIT, |
|
}; |
|
|
|
static struct platform_device smsc911x_device = { |
|
.name = "smsc911x", |
|
.id = -1, |
|
.num_resources = ARRAY_SIZE(smsc911x_resources), |
|
.resource = smsc911x_resources, |
|
.dev = { |
|
.platform_data = &smsc911x_config, |
|
}, |
|
}; |
|
|
|
static struct resource heartbeat_resources[] = { |
|
[0] = { |
|
.start = PA_LED, |
|
.end = PA_LED, |
|
.flags = IORESOURCE_MEM, |
|
}, |
|
}; |
|
|
|
static struct heartbeat_data heartbeat_data = { |
|
.flags = HEARTBEAT_INVERTED, |
|
}; |
|
|
|
static struct platform_device heartbeat_device = { |
|
.name = "heartbeat", |
|
.id = -1, |
|
.dev = { |
|
.platform_data = &heartbeat_data, |
|
}, |
|
.num_resources = ARRAY_SIZE(heartbeat_resources), |
|
.resource = heartbeat_resources, |
|
}; |
|
|
|
static struct mtd_partition mpr2_partitions[] = { |
|
/* Reserved for bootloader, read-only */ |
|
{ |
|
.name = "Bootloader", |
|
.offset = 0x00000000UL, |
|
.size = MPR2_MTD_BOOTLOADER_SIZE, |
|
.mask_flags = MTD_WRITEABLE, |
|
}, |
|
/* Reserved for kernel image */ |
|
{ |
|
.name = "Kernel", |
|
.offset = MTDPART_OFS_NXTBLK, |
|
.size = MPR2_MTD_KERNEL_SIZE, |
|
}, |
|
/* Rest is used for Flash FS */ |
|
{ |
|
.name = "Flash_FS", |
|
.offset = MTDPART_OFS_NXTBLK, |
|
.size = MTDPART_SIZ_FULL, |
|
} |
|
}; |
|
|
|
static struct physmap_flash_data flash_data = { |
|
.parts = mpr2_partitions, |
|
.nr_parts = ARRAY_SIZE(mpr2_partitions), |
|
.width = 2, |
|
}; |
|
|
|
static struct resource flash_resource = { |
|
.start = 0x00000000, |
|
.end = 0x2000000UL, |
|
.flags = IORESOURCE_MEM, |
|
}; |
|
|
|
static struct platform_device flash_device = { |
|
.name = "physmap-flash", |
|
.id = -1, |
|
.resource = &flash_resource, |
|
.num_resources = 1, |
|
.dev = { |
|
.platform_data = &flash_data, |
|
}, |
|
}; |
|
|
|
/* |
|
* Add all resources to the platform_device |
|
*/ |
|
|
|
static struct platform_device *mpr2_devices[] __initdata = { |
|
&heartbeat_device, |
|
&smsc911x_device, |
|
&flash_device, |
|
}; |
|
|
|
|
|
static int __init mpr2_devices_setup(void) |
|
{ |
|
regulator_register_fixed(0, dummy_supplies, ARRAY_SIZE(dummy_supplies)); |
|
|
|
return platform_add_devices(mpr2_devices, ARRAY_SIZE(mpr2_devices)); |
|
} |
|
device_initcall(mpr2_devices_setup); |
|
|
|
/* |
|
* Initialize IRQ setting |
|
*/ |
|
static void __init init_mpr2_IRQ(void) |
|
{ |
|
plat_irq_setup_pins(IRQ_MODE_IRQ); /* install handlers for IRQ0-5 */ |
|
|
|
irq_set_irq_type(evt2irq(0x600), IRQ_TYPE_LEVEL_LOW); /* IRQ0 CAN1 */ |
|
irq_set_irq_type(evt2irq(0x620), IRQ_TYPE_LEVEL_LOW); /* IRQ1 CAN2 */ |
|
irq_set_irq_type(evt2irq(0x640), IRQ_TYPE_LEVEL_LOW); /* IRQ2 CAN3 */ |
|
irq_set_irq_type(evt2irq(0x660), IRQ_TYPE_LEVEL_LOW); /* IRQ3 SMSC9115 */ |
|
irq_set_irq_type(evt2irq(0x680), IRQ_TYPE_EDGE_RISING); /* IRQ4 touchscreen */ |
|
irq_set_irq_type(evt2irq(0x6a0), IRQ_TYPE_EDGE_FALLING); /* IRQ5 touchscreen */ |
|
|
|
intc_set_priority(evt2irq(0x600), 13); /* IRQ0 CAN1 */ |
|
intc_set_priority(evt2irq(0x620), 13); /* IRQ0 CAN2 */ |
|
intc_set_priority(evt2irq(0x640), 13); /* IRQ0 CAN3 */ |
|
intc_set_priority(evt2irq(0x660), 6); /* IRQ3 SMSC9115 */ |
|
} |
|
|
|
/* |
|
* The Machine Vector |
|
*/ |
|
|
|
static struct sh_machine_vector mv_mpr2 __initmv = { |
|
.mv_name = "mpr2", |
|
.mv_setup = mpr2_setup, |
|
.mv_init_irq = init_mpr2_IRQ, |
|
};
|
|
|