mirror of https://github.com/Qortal/Brooklyn
You can not select more than 25 topics
Topics must start with a letter or number, can include dashes ('-') and can be up to 35 characters long.
1268 lines
38 KiB
1268 lines
38 KiB
/* SPDX-License-Identifier: GPL-2.0 */ |
|
|
|
/* include/asm-m68knommu/MC68328.h: '328 control registers |
|
* |
|
* Copyright (C) 1999 Vladimir Gurevich <[email protected]> |
|
* Bear & Hare Software, Inc. |
|
* |
|
* Based on include/asm-m68knommu/MC68332.h |
|
* Copyright (C) 1998 Kenneth Albanowski <[email protected]>, |
|
* |
|
*/ |
|
#include <linux/compiler.h> |
|
|
|
#ifndef _MC68328_H_ |
|
#define _MC68328_H_ |
|
|
|
#define BYTE_REF(addr) (*((volatile unsigned char*)addr)) |
|
#define WORD_REF(addr) (*((volatile unsigned short*)addr)) |
|
#define LONG_REF(addr) (*((volatile unsigned long*)addr)) |
|
|
|
#define PUT_FIELD(field, val) (((val) << field##_SHIFT) & field##_MASK) |
|
#define GET_FIELD(reg, field) (((reg) & field##_MASK) >> field##_SHIFT) |
|
|
|
/********** |
|
* |
|
* 0xFFFFF0xx -- System Control |
|
* |
|
**********/ |
|
|
|
/* |
|
* System Control Register (SCR) |
|
*/ |
|
#define SCR_ADDR 0xfffff000 |
|
#define SCR BYTE_REF(SCR_ADDR) |
|
|
|
#define SCR_WDTH8 0x01 /* 8-Bit Width Select */ |
|
#define SCR_DMAP 0x04 /* Double Map */ |
|
#define SCR_SO 0x08 /* Supervisor Only */ |
|
#define SCR_BETEN 0x10 /* Bus-Error Time-Out Enable */ |
|
#define SCR_PRV 0x20 /* Privilege Violation */ |
|
#define SCR_WPV 0x40 /* Write Protect Violation */ |
|
#define SCR_BETO 0x80 /* Bus-Error TimeOut */ |
|
|
|
/* |
|
* Mask Revision Register |
|
*/ |
|
#define MRR_ADDR 0xfffff004 |
|
#define MRR LONG_REF(MRR_ADDR) |
|
|
|
/********** |
|
* |
|
* 0xFFFFF1xx -- Chip-Select logic |
|
* |
|
**********/ |
|
|
|
/********** |
|
* |
|
* 0xFFFFF2xx -- Phase Locked Loop (PLL) & Power Control |
|
* |
|
**********/ |
|
|
|
/* |
|
* Group Base Address Registers |
|
*/ |
|
#define GRPBASEA_ADDR 0xfffff100 |
|
#define GRPBASEB_ADDR 0xfffff102 |
|
#define GRPBASEC_ADDR 0xfffff104 |
|
#define GRPBASED_ADDR 0xfffff106 |
|
|
|
#define GRPBASEA WORD_REF(GRPBASEA_ADDR) |
|
#define GRPBASEB WORD_REF(GRPBASEB_ADDR) |
|
#define GRPBASEC WORD_REF(GRPBASEC_ADDR) |
|
#define GRPBASED WORD_REF(GRPBASED_ADDR) |
|
|
|
#define GRPBASE_V 0x0001 /* Valid */ |
|
#define GRPBASE_GBA_MASK 0xfff0 /* Group Base Address (bits 31-20) */ |
|
|
|
/* |
|
* Group Base Address Mask Registers |
|
*/ |
|
#define GRPMASKA_ADDR 0xfffff108 |
|
#define GRPMASKB_ADDR 0xfffff10a |
|
#define GRPMASKC_ADDR 0xfffff10c |
|
#define GRPMASKD_ADDR 0xfffff10e |
|
|
|
#define GRPMASKA WORD_REF(GRPMASKA_ADDR) |
|
#define GRPMASKB WORD_REF(GRPMASKB_ADDR) |
|
#define GRPMASKC WORD_REF(GRPMASKC_ADDR) |
|
#define GRPMASKD WORD_REF(GRPMASKD_ADDR) |
|
|
|
#define GRMMASK_GMA_MASK 0xfffff0 /* Group Base Mask (bits 31-20) */ |
|
|
|
/* |
|
* Chip-Select Option Registers (group A) |
|
*/ |
|
#define CSA0_ADDR 0xfffff110 |
|
#define CSA1_ADDR 0xfffff114 |
|
#define CSA2_ADDR 0xfffff118 |
|
#define CSA3_ADDR 0xfffff11c |
|
|
|
#define CSA0 LONG_REF(CSA0_ADDR) |
|
#define CSA1 LONG_REF(CSA1_ADDR) |
|
#define CSA2 LONG_REF(CSA2_ADDR) |
|
#define CSA3 LONG_REF(CSA3_ADDR) |
|
|
|
#define CSA_WAIT_MASK 0x00000007 /* Wait State Selection */ |
|
#define CSA_WAIT_SHIFT 0 |
|
#define CSA_RO 0x00000008 /* Read-Only */ |
|
#define CSA_AM_MASK 0x0000ff00 /* Address Mask (bits 23-16) */ |
|
#define CSA_AM_SHIFT 8 |
|
#define CSA_BUSW 0x00010000 /* Bus Width Select */ |
|
#define CSA_AC_MASK 0xff000000 /* Address Compare (bits 23-16) */ |
|
#define CSA_AC_SHIFT 24 |
|
|
|
/* |
|
* Chip-Select Option Registers (group B) |
|
*/ |
|
#define CSB0_ADDR 0xfffff120 |
|
#define CSB1_ADDR 0xfffff124 |
|
#define CSB2_ADDR 0xfffff128 |
|
#define CSB3_ADDR 0xfffff12c |
|
|
|
#define CSB0 LONG_REF(CSB0_ADDR) |
|
#define CSB1 LONG_REF(CSB1_ADDR) |
|
#define CSB2 LONG_REF(CSB2_ADDR) |
|
#define CSB3 LONG_REF(CSB3_ADDR) |
|
|
|
#define CSB_WAIT_MASK 0x00000007 /* Wait State Selection */ |
|
#define CSB_WAIT_SHIFT 0 |
|
#define CSB_RO 0x00000008 /* Read-Only */ |
|
#define CSB_AM_MASK 0x0000ff00 /* Address Mask (bits 23-16) */ |
|
#define CSB_AM_SHIFT 8 |
|
#define CSB_BUSW 0x00010000 /* Bus Width Select */ |
|
#define CSB_AC_MASK 0xff000000 /* Address Compare (bits 23-16) */ |
|
#define CSB_AC_SHIFT 24 |
|
|
|
/* |
|
* Chip-Select Option Registers (group C) |
|
*/ |
|
#define CSC0_ADDR 0xfffff130 |
|
#define CSC1_ADDR 0xfffff134 |
|
#define CSC2_ADDR 0xfffff138 |
|
#define CSC3_ADDR 0xfffff13c |
|
|
|
#define CSC0 LONG_REF(CSC0_ADDR) |
|
#define CSC1 LONG_REF(CSC1_ADDR) |
|
#define CSC2 LONG_REF(CSC2_ADDR) |
|
#define CSC3 LONG_REF(CSC3_ADDR) |
|
|
|
#define CSC_WAIT_MASK 0x00000007 /* Wait State Selection */ |
|
#define CSC_WAIT_SHIFT 0 |
|
#define CSC_RO 0x00000008 /* Read-Only */ |
|
#define CSC_AM_MASK 0x0000fff0 /* Address Mask (bits 23-12) */ |
|
#define CSC_AM_SHIFT 4 |
|
#define CSC_BUSW 0x00010000 /* Bus Width Select */ |
|
#define CSC_AC_MASK 0xfff00000 /* Address Compare (bits 23-12) */ |
|
#define CSC_AC_SHIFT 20 |
|
|
|
/* |
|
* Chip-Select Option Registers (group D) |
|
*/ |
|
#define CSD0_ADDR 0xfffff140 |
|
#define CSD1_ADDR 0xfffff144 |
|
#define CSD2_ADDR 0xfffff148 |
|
#define CSD3_ADDR 0xfffff14c |
|
|
|
#define CSD0 LONG_REF(CSD0_ADDR) |
|
#define CSD1 LONG_REF(CSD1_ADDR) |
|
#define CSD2 LONG_REF(CSD2_ADDR) |
|
#define CSD3 LONG_REF(CSD3_ADDR) |
|
|
|
#define CSD_WAIT_MASK 0x00000007 /* Wait State Selection */ |
|
#define CSD_WAIT_SHIFT 0 |
|
#define CSD_RO 0x00000008 /* Read-Only */ |
|
#define CSD_AM_MASK 0x0000fff0 /* Address Mask (bits 23-12) */ |
|
#define CSD_AM_SHIFT 4 |
|
#define CSD_BUSW 0x00010000 /* Bus Width Select */ |
|
#define CSD_AC_MASK 0xfff00000 /* Address Compare (bits 23-12) */ |
|
#define CSD_AC_SHIFT 20 |
|
|
|
/********** |
|
* |
|
* 0xFFFFF2xx -- Phase Locked Loop (PLL) & Power Control |
|
* |
|
**********/ |
|
|
|
/* |
|
* PLL Control Register |
|
*/ |
|
#define PLLCR_ADDR 0xfffff200 |
|
#define PLLCR WORD_REF(PLLCR_ADDR) |
|
|
|
#define PLLCR_DISPLL 0x0008 /* Disable PLL */ |
|
#define PLLCR_CLKEN 0x0010 /* Clock (CLKO pin) enable */ |
|
#define PLLCR_SYSCLK_SEL_MASK 0x0700 /* System Clock Selection */ |
|
#define PLLCR_SYSCLK_SEL_SHIFT 8 |
|
#define PLLCR_PIXCLK_SEL_MASK 0x3800 /* LCD Clock Selection */ |
|
#define PLLCR_PIXCLK_SEL_SHIFT 11 |
|
|
|
/* 'EZ328-compatible definitions */ |
|
#define PLLCR_LCDCLK_SEL_MASK PLLCR_PIXCLK_SEL_MASK |
|
#define PLLCR_LCDCLK_SEL_SHIFT PLLCR_PIXCLK_SEL_SHIFT |
|
|
|
/* |
|
* PLL Frequency Select Register |
|
*/ |
|
#define PLLFSR_ADDR 0xfffff202 |
|
#define PLLFSR WORD_REF(PLLFSR_ADDR) |
|
|
|
#define PLLFSR_PC_MASK 0x00ff /* P Count */ |
|
#define PLLFSR_PC_SHIFT 0 |
|
#define PLLFSR_QC_MASK 0x0f00 /* Q Count */ |
|
#define PLLFSR_QC_SHIFT 8 |
|
#define PLLFSR_PROT 0x4000 /* Protect P & Q */ |
|
#define PLLFSR_CLK32 0x8000 /* Clock 32 (kHz) */ |
|
|
|
/* |
|
* Power Control Register |
|
*/ |
|
#define PCTRL_ADDR 0xfffff207 |
|
#define PCTRL BYTE_REF(PCTRL_ADDR) |
|
|
|
#define PCTRL_WIDTH_MASK 0x1f /* CPU Clock bursts width */ |
|
#define PCTRL_WIDTH_SHIFT 0 |
|
#define PCTRL_STOP 0x40 /* Enter power-save mode immediately */ |
|
#define PCTRL_PCEN 0x80 /* Power Control Enable */ |
|
|
|
/********** |
|
* |
|
* 0xFFFFF3xx -- Interrupt Controller |
|
* |
|
**********/ |
|
|
|
/* |
|
* Interrupt Vector Register |
|
*/ |
|
#define IVR_ADDR 0xfffff300 |
|
#define IVR BYTE_REF(IVR_ADDR) |
|
|
|
#define IVR_VECTOR_MASK 0xF8 |
|
|
|
/* |
|
* Interrupt control Register |
|
*/ |
|
#define ICR_ADRR 0xfffff302 |
|
#define ICR WORD_REF(ICR_ADDR) |
|
|
|
#define ICR_ET6 0x0100 /* Edge Trigger Select for IRQ6 */ |
|
#define ICR_ET3 0x0200 /* Edge Trigger Select for IRQ3 */ |
|
#define ICR_ET2 0x0400 /* Edge Trigger Select for IRQ2 */ |
|
#define ICR_ET1 0x0800 /* Edge Trigger Select for IRQ1 */ |
|
#define ICR_POL6 0x1000 /* Polarity Control for IRQ6 */ |
|
#define ICR_POL3 0x2000 /* Polarity Control for IRQ3 */ |
|
#define ICR_POL2 0x4000 /* Polarity Control for IRQ2 */ |
|
#define ICR_POL1 0x8000 /* Polarity Control for IRQ1 */ |
|
|
|
/* |
|
* Interrupt Mask Register |
|
*/ |
|
#define IMR_ADDR 0xfffff304 |
|
#define IMR LONG_REF(IMR_ADDR) |
|
|
|
/* |
|
* Define the names for bit positions first. This is useful for |
|
* request_irq |
|
*/ |
|
#define SPIM_IRQ_NUM 0 /* SPI Master interrupt */ |
|
#define TMR2_IRQ_NUM 1 /* Timer 2 interrupt */ |
|
#define UART_IRQ_NUM 2 /* UART interrupt */ |
|
#define WDT_IRQ_NUM 3 /* Watchdog Timer interrupt */ |
|
#define RTC_IRQ_NUM 4 /* RTC interrupt */ |
|
#define KB_IRQ_NUM 6 /* Keyboard Interrupt */ |
|
#define PWM_IRQ_NUM 7 /* Pulse-Width Modulator int. */ |
|
#define INT0_IRQ_NUM 8 /* External INT0 */ |
|
#define INT1_IRQ_NUM 9 /* External INT1 */ |
|
#define INT2_IRQ_NUM 10 /* External INT2 */ |
|
#define INT3_IRQ_NUM 11 /* External INT3 */ |
|
#define INT4_IRQ_NUM 12 /* External INT4 */ |
|
#define INT5_IRQ_NUM 13 /* External INT5 */ |
|
#define INT6_IRQ_NUM 14 /* External INT6 */ |
|
#define INT7_IRQ_NUM 15 /* External INT7 */ |
|
#define IRQ1_IRQ_NUM 16 /* IRQ1 */ |
|
#define IRQ2_IRQ_NUM 17 /* IRQ2 */ |
|
#define IRQ3_IRQ_NUM 18 /* IRQ3 */ |
|
#define IRQ6_IRQ_NUM 19 /* IRQ6 */ |
|
#define PEN_IRQ_NUM 20 /* Pen Interrupt */ |
|
#define SPIS_IRQ_NUM 21 /* SPI Slave Interrupt */ |
|
#define TMR1_IRQ_NUM 22 /* Timer 1 interrupt */ |
|
#define IRQ7_IRQ_NUM 23 /* IRQ7 */ |
|
|
|
/* '328-compatible definitions */ |
|
#define SPI_IRQ_NUM SPIM_IRQ_NUM |
|
#define TMR_IRQ_NUM TMR1_IRQ_NUM |
|
|
|
/* |
|
* Here go the bitmasks themselves |
|
*/ |
|
#define IMR_MSPIM (1 << SPIM_IRQ_NUM) /* Mask SPI Master interrupt */ |
|
#define IMR_MTMR2 (1 << TMR2_IRQ_NUM) /* Mask Timer 2 interrupt */ |
|
#define IMR_MUART (1 << UART_IRQ_NUM) /* Mask UART interrupt */ |
|
#define IMR_MWDT (1 << WDT_IRQ_NUM) /* Mask Watchdog Timer interrupt */ |
|
#define IMR_MRTC (1 << RTC_IRQ_NUM) /* Mask RTC interrupt */ |
|
#define IMR_MKB (1 << KB_IRQ_NUM) /* Mask Keyboard Interrupt */ |
|
#define IMR_MPWM (1 << PWM_IRQ_NUM) /* Mask Pulse-Width Modulator int. */ |
|
#define IMR_MINT0 (1 << INT0_IRQ_NUM) /* Mask External INT0 */ |
|
#define IMR_MINT1 (1 << INT1_IRQ_NUM) /* Mask External INT1 */ |
|
#define IMR_MINT2 (1 << INT2_IRQ_NUM) /* Mask External INT2 */ |
|
#define IMR_MINT3 (1 << INT3_IRQ_NUM) /* Mask External INT3 */ |
|
#define IMR_MINT4 (1 << INT4_IRQ_NUM) /* Mask External INT4 */ |
|
#define IMR_MINT5 (1 << INT5_IRQ_NUM) /* Mask External INT5 */ |
|
#define IMR_MINT6 (1 << INT6_IRQ_NUM) /* Mask External INT6 */ |
|
#define IMR_MINT7 (1 << INT7_IRQ_NUM) /* Mask External INT7 */ |
|
#define IMR_MIRQ1 (1 << IRQ1_IRQ_NUM) /* Mask IRQ1 */ |
|
#define IMR_MIRQ2 (1 << IRQ2_IRQ_NUM) /* Mask IRQ2 */ |
|
#define IMR_MIRQ3 (1 << IRQ3_IRQ_NUM) /* Mask IRQ3 */ |
|
#define IMR_MIRQ6 (1 << IRQ6_IRQ_NUM) /* Mask IRQ6 */ |
|
#define IMR_MPEN (1 << PEN_IRQ_NUM) /* Mask Pen Interrupt */ |
|
#define IMR_MSPIS (1 << SPIS_IRQ_NUM) /* Mask SPI Slave Interrupt */ |
|
#define IMR_MTMR1 (1 << TMR1_IRQ_NUM) /* Mask Timer 1 interrupt */ |
|
#define IMR_MIRQ7 (1 << IRQ7_IRQ_NUM) /* Mask IRQ7 */ |
|
|
|
/* 'EZ328-compatible definitions */ |
|
#define IMR_MSPI IMR_MSPIM |
|
#define IMR_MTMR IMR_MTMR1 |
|
|
|
/* |
|
* Interrupt Wake-Up Enable Register |
|
*/ |
|
#define IWR_ADDR 0xfffff308 |
|
#define IWR LONG_REF(IWR_ADDR) |
|
|
|
#define IWR_SPIM (1 << SPIM_IRQ_NUM) /* SPI Master interrupt */ |
|
#define IWR_TMR2 (1 << TMR2_IRQ_NUM) /* Timer 2 interrupt */ |
|
#define IWR_UART (1 << UART_IRQ_NUM) /* UART interrupt */ |
|
#define IWR_WDT (1 << WDT_IRQ_NUM) /* Watchdog Timer interrupt */ |
|
#define IWR_RTC (1 << RTC_IRQ_NUM) /* RTC interrupt */ |
|
#define IWR_KB (1 << KB_IRQ_NUM) /* Keyboard Interrupt */ |
|
#define IWR_PWM (1 << PWM_IRQ_NUM) /* Pulse-Width Modulator int. */ |
|
#define IWR_INT0 (1 << INT0_IRQ_NUM) /* External INT0 */ |
|
#define IWR_INT1 (1 << INT1_IRQ_NUM) /* External INT1 */ |
|
#define IWR_INT2 (1 << INT2_IRQ_NUM) /* External INT2 */ |
|
#define IWR_INT3 (1 << INT3_IRQ_NUM) /* External INT3 */ |
|
#define IWR_INT4 (1 << INT4_IRQ_NUM) /* External INT4 */ |
|
#define IWR_INT5 (1 << INT5_IRQ_NUM) /* External INT5 */ |
|
#define IWR_INT6 (1 << INT6_IRQ_NUM) /* External INT6 */ |
|
#define IWR_INT7 (1 << INT7_IRQ_NUM) /* External INT7 */ |
|
#define IWR_IRQ1 (1 << IRQ1_IRQ_NUM) /* IRQ1 */ |
|
#define IWR_IRQ2 (1 << IRQ2_IRQ_NUM) /* IRQ2 */ |
|
#define IWR_IRQ3 (1 << IRQ3_IRQ_NUM) /* IRQ3 */ |
|
#define IWR_IRQ6 (1 << IRQ6_IRQ_NUM) /* IRQ6 */ |
|
#define IWR_PEN (1 << PEN_IRQ_NUM) /* Pen Interrupt */ |
|
#define IWR_SPIS (1 << SPIS_IRQ_NUM) /* SPI Slave Interrupt */ |
|
#define IWR_TMR1 (1 << TMR1_IRQ_NUM) /* Timer 1 interrupt */ |
|
#define IWR_IRQ7 (1 << IRQ7_IRQ_NUM) /* IRQ7 */ |
|
|
|
/* |
|
* Interrupt Status Register |
|
*/ |
|
#define ISR_ADDR 0xfffff30c |
|
#define ISR LONG_REF(ISR_ADDR) |
|
|
|
#define ISR_SPIM (1 << SPIM_IRQ_NUM) /* SPI Master interrupt */ |
|
#define ISR_TMR2 (1 << TMR2_IRQ_NUM) /* Timer 2 interrupt */ |
|
#define ISR_UART (1 << UART_IRQ_NUM) /* UART interrupt */ |
|
#define ISR_WDT (1 << WDT_IRQ_NUM) /* Watchdog Timer interrupt */ |
|
#define ISR_RTC (1 << RTC_IRQ_NUM) /* RTC interrupt */ |
|
#define ISR_KB (1 << KB_IRQ_NUM) /* Keyboard Interrupt */ |
|
#define ISR_PWM (1 << PWM_IRQ_NUM) /* Pulse-Width Modulator int. */ |
|
#define ISR_INT0 (1 << INT0_IRQ_NUM) /* External INT0 */ |
|
#define ISR_INT1 (1 << INT1_IRQ_NUM) /* External INT1 */ |
|
#define ISR_INT2 (1 << INT2_IRQ_NUM) /* External INT2 */ |
|
#define ISR_INT3 (1 << INT3_IRQ_NUM) /* External INT3 */ |
|
#define ISR_INT4 (1 << INT4_IRQ_NUM) /* External INT4 */ |
|
#define ISR_INT5 (1 << INT5_IRQ_NUM) /* External INT5 */ |
|
#define ISR_INT6 (1 << INT6_IRQ_NUM) /* External INT6 */ |
|
#define ISR_INT7 (1 << INT7_IRQ_NUM) /* External INT7 */ |
|
#define ISR_IRQ1 (1 << IRQ1_IRQ_NUM) /* IRQ1 */ |
|
#define ISR_IRQ2 (1 << IRQ2_IRQ_NUM) /* IRQ2 */ |
|
#define ISR_IRQ3 (1 << IRQ3_IRQ_NUM) /* IRQ3 */ |
|
#define ISR_IRQ6 (1 << IRQ6_IRQ_NUM) /* IRQ6 */ |
|
#define ISR_PEN (1 << PEN_IRQ_NUM) /* Pen Interrupt */ |
|
#define ISR_SPIS (1 << SPIS_IRQ_NUM) /* SPI Slave Interrupt */ |
|
#define ISR_TMR1 (1 << TMR1_IRQ_NUM) /* Timer 1 interrupt */ |
|
#define ISR_IRQ7 (1 << IRQ7_IRQ_NUM) /* IRQ7 */ |
|
|
|
/* 'EZ328-compatible definitions */ |
|
#define ISR_SPI ISR_SPIM |
|
#define ISR_TMR ISR_TMR1 |
|
|
|
/* |
|
* Interrupt Pending Register |
|
*/ |
|
#define IPR_ADDR 0xfffff310 |
|
#define IPR LONG_REF(IPR_ADDR) |
|
|
|
#define IPR_SPIM (1 << SPIM_IRQ_NUM) /* SPI Master interrupt */ |
|
#define IPR_TMR2 (1 << TMR2_IRQ_NUM) /* Timer 2 interrupt */ |
|
#define IPR_UART (1 << UART_IRQ_NUM) /* UART interrupt */ |
|
#define IPR_WDT (1 << WDT_IRQ_NUM) /* Watchdog Timer interrupt */ |
|
#define IPR_RTC (1 << RTC_IRQ_NUM) /* RTC interrupt */ |
|
#define IPR_KB (1 << KB_IRQ_NUM) /* Keyboard Interrupt */ |
|
#define IPR_PWM (1 << PWM_IRQ_NUM) /* Pulse-Width Modulator int. */ |
|
#define IPR_INT0 (1 << INT0_IRQ_NUM) /* External INT0 */ |
|
#define IPR_INT1 (1 << INT1_IRQ_NUM) /* External INT1 */ |
|
#define IPR_INT2 (1 << INT2_IRQ_NUM) /* External INT2 */ |
|
#define IPR_INT3 (1 << INT3_IRQ_NUM) /* External INT3 */ |
|
#define IPR_INT4 (1 << INT4_IRQ_NUM) /* External INT4 */ |
|
#define IPR_INT5 (1 << INT5_IRQ_NUM) /* External INT5 */ |
|
#define IPR_INT6 (1 << INT6_IRQ_NUM) /* External INT6 */ |
|
#define IPR_INT7 (1 << INT7_IRQ_NUM) /* External INT7 */ |
|
#define IPR_IRQ1 (1 << IRQ1_IRQ_NUM) /* IRQ1 */ |
|
#define IPR_IRQ2 (1 << IRQ2_IRQ_NUM) /* IRQ2 */ |
|
#define IPR_IRQ3 (1 << IRQ3_IRQ_NUM) /* IRQ3 */ |
|
#define IPR_IRQ6 (1 << IRQ6_IRQ_NUM) /* IRQ6 */ |
|
#define IPR_PEN (1 << PEN_IRQ_NUM) /* Pen Interrupt */ |
|
#define IPR_SPIS (1 << SPIS_IRQ_NUM) /* SPI Slave Interrupt */ |
|
#define IPR_TMR1 (1 << TMR1_IRQ_NUM) /* Timer 1 interrupt */ |
|
#define IPR_IRQ7 (1 << IRQ7_IRQ_NUM) /* IRQ7 */ |
|
|
|
/* 'EZ328-compatible definitions */ |
|
#define IPR_SPI IPR_SPIM |
|
#define IPR_TMR IPR_TMR1 |
|
|
|
/********** |
|
* |
|
* 0xFFFFF4xx -- Parallel Ports |
|
* |
|
**********/ |
|
|
|
/* |
|
* Port A |
|
*/ |
|
#define PADIR_ADDR 0xfffff400 /* Port A direction reg */ |
|
#define PADATA_ADDR 0xfffff401 /* Port A data register */ |
|
#define PASEL_ADDR 0xfffff403 /* Port A Select register */ |
|
|
|
#define PADIR BYTE_REF(PADIR_ADDR) |
|
#define PADATA BYTE_REF(PADATA_ADDR) |
|
#define PASEL BYTE_REF(PASEL_ADDR) |
|
|
|
#define PA(x) (1 << (x)) |
|
#define PA_A(x) PA((x) - 16) /* This is specific to PA only! */ |
|
|
|
#define PA_A16 PA(0) /* Use A16 as PA(0) */ |
|
#define PA_A17 PA(1) /* Use A17 as PA(1) */ |
|
#define PA_A18 PA(2) /* Use A18 as PA(2) */ |
|
#define PA_A19 PA(3) /* Use A19 as PA(3) */ |
|
#define PA_A20 PA(4) /* Use A20 as PA(4) */ |
|
#define PA_A21 PA(5) /* Use A21 as PA(5) */ |
|
#define PA_A22 PA(6) /* Use A22 as PA(6) */ |
|
#define PA_A23 PA(7) /* Use A23 as PA(7) */ |
|
|
|
/* |
|
* Port B |
|
*/ |
|
#define PBDIR_ADDR 0xfffff408 /* Port B direction reg */ |
|
#define PBDATA_ADDR 0xfffff409 /* Port B data register */ |
|
#define PBSEL_ADDR 0xfffff40b /* Port B Select Register */ |
|
|
|
#define PBDIR BYTE_REF(PBDIR_ADDR) |
|
#define PBDATA BYTE_REF(PBDATA_ADDR) |
|
#define PBSEL BYTE_REF(PBSEL_ADDR) |
|
|
|
#define PB(x) (1 << (x)) |
|
#define PB_D(x) PB(x) /* This is specific to port B only */ |
|
|
|
#define PB_D0 PB(0) /* Use D0 as PB(0) */ |
|
#define PB_D1 PB(1) /* Use D1 as PB(1) */ |
|
#define PB_D2 PB(2) /* Use D2 as PB(2) */ |
|
#define PB_D3 PB(3) /* Use D3 as PB(3) */ |
|
#define PB_D4 PB(4) /* Use D4 as PB(4) */ |
|
#define PB_D5 PB(5) /* Use D5 as PB(5) */ |
|
#define PB_D6 PB(6) /* Use D6 as PB(6) */ |
|
#define PB_D7 PB(7) /* Use D7 as PB(7) */ |
|
|
|
/* |
|
* Port C |
|
*/ |
|
#define PCDIR_ADDR 0xfffff410 /* Port C direction reg */ |
|
#define PCDATA_ADDR 0xfffff411 /* Port C data register */ |
|
#define PCSEL_ADDR 0xfffff413 /* Port C Select Register */ |
|
|
|
#define PCDIR BYTE_REF(PCDIR_ADDR) |
|
#define PCDATA BYTE_REF(PCDATA_ADDR) |
|
#define PCSEL BYTE_REF(PCSEL_ADDR) |
|
|
|
#define PC(x) (1 << (x)) |
|
|
|
#define PC_WE PC(6) /* Use WE as PC(6) */ |
|
#define PC_DTACK PC(5) /* Use DTACK as PC(5) */ |
|
#define PC_IRQ7 PC(4) /* Use IRQ7 as PC(4) */ |
|
#define PC_LDS PC(2) /* Use LDS as PC(2) */ |
|
#define PC_UDS PC(1) /* Use UDS as PC(1) */ |
|
#define PC_MOCLK PC(0) /* Use MOCLK as PC(0) */ |
|
|
|
/* |
|
* Port D |
|
*/ |
|
#define PDDIR_ADDR 0xfffff418 /* Port D direction reg */ |
|
#define PDDATA_ADDR 0xfffff419 /* Port D data register */ |
|
#define PDPUEN_ADDR 0xfffff41a /* Port D Pull-Up enable reg */ |
|
#define PDPOL_ADDR 0xfffff41c /* Port D Polarity Register */ |
|
#define PDIRQEN_ADDR 0xfffff41d /* Port D IRQ enable register */ |
|
#define PDIQEG_ADDR 0xfffff41f /* Port D IRQ Edge Register */ |
|
|
|
#define PDDIR BYTE_REF(PDDIR_ADDR) |
|
#define PDDATA BYTE_REF(PDDATA_ADDR) |
|
#define PDPUEN BYTE_REF(PDPUEN_ADDR) |
|
#define PDPOL BYTE_REF(PDPOL_ADDR) |
|
#define PDIRQEN BYTE_REF(PDIRQEN_ADDR) |
|
#define PDIQEG BYTE_REF(PDIQEG_ADDR) |
|
|
|
#define PD(x) (1 << (x)) |
|
#define PD_KB(x) PD(x) /* This is specific for Port D only */ |
|
|
|
#define PD_KB0 PD(0) /* Use KB0 as PD(0) */ |
|
#define PD_KB1 PD(1) /* Use KB1 as PD(1) */ |
|
#define PD_KB2 PD(2) /* Use KB2 as PD(2) */ |
|
#define PD_KB3 PD(3) /* Use KB3 as PD(3) */ |
|
#define PD_KB4 PD(4) /* Use KB4 as PD(4) */ |
|
#define PD_KB5 PD(5) /* Use KB5 as PD(5) */ |
|
#define PD_KB6 PD(6) /* Use KB6 as PD(6) */ |
|
#define PD_KB7 PD(7) /* Use KB7 as PD(7) */ |
|
|
|
/* |
|
* Port E |
|
*/ |
|
#define PEDIR_ADDR 0xfffff420 /* Port E direction reg */ |
|
#define PEDATA_ADDR 0xfffff421 /* Port E data register */ |
|
#define PEPUEN_ADDR 0xfffff422 /* Port E Pull-Up enable reg */ |
|
#define PESEL_ADDR 0xfffff423 /* Port E Select Register */ |
|
|
|
#define PEDIR BYTE_REF(PEDIR_ADDR) |
|
#define PEDATA BYTE_REF(PEDATA_ADDR) |
|
#define PEPUEN BYTE_REF(PEPUEN_ADDR) |
|
#define PESEL BYTE_REF(PESEL_ADDR) |
|
|
|
#define PE(x) (1 << (x)) |
|
|
|
#define PE_CSA1 PE(1) /* Use CSA1 as PE(1) */ |
|
#define PE_CSA2 PE(2) /* Use CSA2 as PE(2) */ |
|
#define PE_CSA3 PE(3) /* Use CSA3 as PE(3) */ |
|
#define PE_CSB0 PE(4) /* Use CSB0 as PE(4) */ |
|
#define PE_CSB1 PE(5) /* Use CSB1 as PE(5) */ |
|
#define PE_CSB2 PE(6) /* Use CSB2 as PE(6) */ |
|
#define PE_CSB3 PE(7) /* Use CSB3 as PE(7) */ |
|
|
|
/* |
|
* Port F |
|
*/ |
|
#define PFDIR_ADDR 0xfffff428 /* Port F direction reg */ |
|
#define PFDATA_ADDR 0xfffff429 /* Port F data register */ |
|
#define PFPUEN_ADDR 0xfffff42a /* Port F Pull-Up enable reg */ |
|
#define PFSEL_ADDR 0xfffff42b /* Port F Select Register */ |
|
|
|
#define PFDIR BYTE_REF(PFDIR_ADDR) |
|
#define PFDATA BYTE_REF(PFDATA_ADDR) |
|
#define PFPUEN BYTE_REF(PFPUEN_ADDR) |
|
#define PFSEL BYTE_REF(PFSEL_ADDR) |
|
|
|
#define PF(x) (1 << (x)) |
|
#define PF_A(x) PF((x) - 24) /* This is Port F specific only */ |
|
|
|
#define PF_A24 PF(0) /* Use A24 as PF(0) */ |
|
#define PF_A25 PF(1) /* Use A25 as PF(1) */ |
|
#define PF_A26 PF(2) /* Use A26 as PF(2) */ |
|
#define PF_A27 PF(3) /* Use A27 as PF(3) */ |
|
#define PF_A28 PF(4) /* Use A28 as PF(4) */ |
|
#define PF_A29 PF(5) /* Use A29 as PF(5) */ |
|
#define PF_A30 PF(6) /* Use A30 as PF(6) */ |
|
#define PF_A31 PF(7) /* Use A31 as PF(7) */ |
|
|
|
/* |
|
* Port G |
|
*/ |
|
#define PGDIR_ADDR 0xfffff430 /* Port G direction reg */ |
|
#define PGDATA_ADDR 0xfffff431 /* Port G data register */ |
|
#define PGPUEN_ADDR 0xfffff432 /* Port G Pull-Up enable reg */ |
|
#define PGSEL_ADDR 0xfffff433 /* Port G Select Register */ |
|
|
|
#define PGDIR BYTE_REF(PGDIR_ADDR) |
|
#define PGDATA BYTE_REF(PGDATA_ADDR) |
|
#define PGPUEN BYTE_REF(PGPUEN_ADDR) |
|
#define PGSEL BYTE_REF(PGSEL_ADDR) |
|
|
|
#define PG(x) (1 << (x)) |
|
|
|
#define PG_UART_TXD PG(0) /* Use UART_TXD as PG(0) */ |
|
#define PG_UART_RXD PG(1) /* Use UART_RXD as PG(1) */ |
|
#define PG_PWMOUT PG(2) /* Use PWMOUT as PG(2) */ |
|
#define PG_TOUT2 PG(3) /* Use TOUT2 as PG(3) */ |
|
#define PG_TIN2 PG(4) /* Use TIN2 as PG(4) */ |
|
#define PG_TOUT1 PG(5) /* Use TOUT1 as PG(5) */ |
|
#define PG_TIN1 PG(6) /* Use TIN1 as PG(6) */ |
|
#define PG_RTCOUT PG(7) /* Use RTCOUT as PG(7) */ |
|
|
|
/* |
|
* Port J |
|
*/ |
|
#define PJDIR_ADDR 0xfffff438 /* Port J direction reg */ |
|
#define PJDATA_ADDR 0xfffff439 /* Port J data register */ |
|
#define PJSEL_ADDR 0xfffff43b /* Port J Select Register */ |
|
|
|
#define PJDIR BYTE_REF(PJDIR_ADDR) |
|
#define PJDATA BYTE_REF(PJDATA_ADDR) |
|
#define PJSEL BYTE_REF(PJSEL_ADDR) |
|
|
|
#define PJ(x) (1 << (x)) |
|
|
|
#define PJ_CSD3 PJ(7) /* Use CSD3 as PJ(7) */ |
|
|
|
/* |
|
* Port K |
|
*/ |
|
#define PKDIR_ADDR 0xfffff440 /* Port K direction reg */ |
|
#define PKDATA_ADDR 0xfffff441 /* Port K data register */ |
|
#define PKPUEN_ADDR 0xfffff442 /* Port K Pull-Up enable reg */ |
|
#define PKSEL_ADDR 0xfffff443 /* Port K Select Register */ |
|
|
|
#define PKDIR BYTE_REF(PKDIR_ADDR) |
|
#define PKDATA BYTE_REF(PKDATA_ADDR) |
|
#define PKPUEN BYTE_REF(PKPUEN_ADDR) |
|
#define PKSEL BYTE_REF(PKSEL_ADDR) |
|
|
|
#define PK(x) (1 << (x)) |
|
|
|
/* |
|
* Port M |
|
*/ |
|
#define PMDIR_ADDR 0xfffff438 /* Port M direction reg */ |
|
#define PMDATA_ADDR 0xfffff439 /* Port M data register */ |
|
#define PMPUEN_ADDR 0xfffff43a /* Port M Pull-Up enable reg */ |
|
#define PMSEL_ADDR 0xfffff43b /* Port M Select Register */ |
|
|
|
#define PMDIR BYTE_REF(PMDIR_ADDR) |
|
#define PMDATA BYTE_REF(PMDATA_ADDR) |
|
#define PMPUEN BYTE_REF(PMPUEN_ADDR) |
|
#define PMSEL BYTE_REF(PMSEL_ADDR) |
|
|
|
#define PM(x) (1 << (x)) |
|
|
|
/********** |
|
* |
|
* 0xFFFFF5xx -- Pulse-Width Modulator (PWM) |
|
* |
|
**********/ |
|
|
|
/* |
|
* PWM Control Register |
|
*/ |
|
#define PWMC_ADDR 0xfffff500 |
|
#define PWMC WORD_REF(PWMC_ADDR) |
|
|
|
#define PWMC_CLKSEL_MASK 0x0007 /* Clock Selection */ |
|
#define PWMC_CLKSEL_SHIFT 0 |
|
#define PWMC_PWMEN 0x0010 /* Enable PWM */ |
|
#define PMNC_POL 0x0020 /* PWM Output Bit Polarity */ |
|
#define PWMC_PIN 0x0080 /* Current PWM output pin status */ |
|
#define PWMC_LOAD 0x0100 /* Force a new period */ |
|
#define PWMC_IRQEN 0x4000 /* Interrupt Request Enable */ |
|
#define PWMC_CLKSRC 0x8000 /* Clock Source Select */ |
|
|
|
/* 'EZ328-compatible definitions */ |
|
#define PWMC_EN PWMC_PWMEN |
|
|
|
/* |
|
* PWM Period Register |
|
*/ |
|
#define PWMP_ADDR 0xfffff502 |
|
#define PWMP WORD_REF(PWMP_ADDR) |
|
|
|
/* |
|
* PWM Width Register |
|
*/ |
|
#define PWMW_ADDR 0xfffff504 |
|
#define PWMW WORD_REF(PWMW_ADDR) |
|
|
|
/* |
|
* PWM Counter Register |
|
*/ |
|
#define PWMCNT_ADDR 0xfffff506 |
|
#define PWMCNT WORD_REF(PWMCNT_ADDR) |
|
|
|
/********** |
|
* |
|
* 0xFFFFF6xx -- General-Purpose Timers |
|
* |
|
**********/ |
|
|
|
/* |
|
* Timer Unit 1 and 2 Control Registers |
|
*/ |
|
#define TCTL1_ADDR 0xfffff600 |
|
#define TCTL1 WORD_REF(TCTL1_ADDR) |
|
#define TCTL2_ADDR 0xfffff60c |
|
#define TCTL2 WORD_REF(TCTL2_ADDR) |
|
|
|
#define TCTL_TEN 0x0001 /* Timer Enable */ |
|
#define TCTL_CLKSOURCE_MASK 0x000e /* Clock Source: */ |
|
#define TCTL_CLKSOURCE_STOP 0x0000 /* Stop count (disabled) */ |
|
#define TCTL_CLKSOURCE_SYSCLK 0x0002 /* SYSCLK to prescaler */ |
|
#define TCTL_CLKSOURCE_SYSCLK_16 0x0004 /* SYSCLK/16 to prescaler */ |
|
#define TCTL_CLKSOURCE_TIN 0x0006 /* TIN to prescaler */ |
|
#define TCTL_CLKSOURCE_32KHZ 0x0008 /* 32kHz clock to prescaler */ |
|
#define TCTL_IRQEN 0x0010 /* IRQ Enable */ |
|
#define TCTL_OM 0x0020 /* Output Mode */ |
|
#define TCTL_CAP_MASK 0x00c0 /* Capture Edge: */ |
|
#define TCTL_CAP_RE 0x0040 /* Capture on rizing edge */ |
|
#define TCTL_CAP_FE 0x0080 /* Capture on falling edge */ |
|
#define TCTL_FRR 0x0010 /* Free-Run Mode */ |
|
|
|
/* 'EZ328-compatible definitions */ |
|
#define TCTL_ADDR TCTL1_ADDR |
|
#define TCTL TCTL1 |
|
|
|
/* |
|
* Timer Unit 1 and 2 Prescaler Registers |
|
*/ |
|
#define TPRER1_ADDR 0xfffff602 |
|
#define TPRER1 WORD_REF(TPRER1_ADDR) |
|
#define TPRER2_ADDR 0xfffff60e |
|
#define TPRER2 WORD_REF(TPRER2_ADDR) |
|
|
|
/* 'EZ328-compatible definitions */ |
|
#define TPRER_ADDR TPRER1_ADDR |
|
#define TPRER TPRER1 |
|
|
|
/* |
|
* Timer Unit 1 and 2 Compare Registers |
|
*/ |
|
#define TCMP1_ADDR 0xfffff604 |
|
#define TCMP1 WORD_REF(TCMP1_ADDR) |
|
#define TCMP2_ADDR 0xfffff610 |
|
#define TCMP2 WORD_REF(TCMP2_ADDR) |
|
|
|
/* 'EZ328-compatible definitions */ |
|
#define TCMP_ADDR TCMP1_ADDR |
|
#define TCMP TCMP1 |
|
|
|
/* |
|
* Timer Unit 1 and 2 Capture Registers |
|
*/ |
|
#define TCR1_ADDR 0xfffff606 |
|
#define TCR1 WORD_REF(TCR1_ADDR) |
|
#define TCR2_ADDR 0xfffff612 |
|
#define TCR2 WORD_REF(TCR2_ADDR) |
|
|
|
/* 'EZ328-compatible definitions */ |
|
#define TCR_ADDR TCR1_ADDR |
|
#define TCR TCR1 |
|
|
|
/* |
|
* Timer Unit 1 and 2 Counter Registers |
|
*/ |
|
#define TCN1_ADDR 0xfffff608 |
|
#define TCN1 WORD_REF(TCN1_ADDR) |
|
#define TCN2_ADDR 0xfffff614 |
|
#define TCN2 WORD_REF(TCN2_ADDR) |
|
|
|
/* 'EZ328-compatible definitions */ |
|
#define TCN_ADDR TCN1_ADDR |
|
#define TCN TCN1 |
|
|
|
/* |
|
* Timer Unit 1 and 2 Status Registers |
|
*/ |
|
#define TSTAT1_ADDR 0xfffff60a |
|
#define TSTAT1 WORD_REF(TSTAT1_ADDR) |
|
#define TSTAT2_ADDR 0xfffff616 |
|
#define TSTAT2 WORD_REF(TSTAT2_ADDR) |
|
|
|
#define TSTAT_COMP 0x0001 /* Compare Event occurred */ |
|
#define TSTAT_CAPT 0x0001 /* Capture Event occurred */ |
|
|
|
/* 'EZ328-compatible definitions */ |
|
#define TSTAT_ADDR TSTAT1_ADDR |
|
#define TSTAT TSTAT1 |
|
|
|
/* |
|
* Watchdog Compare Register |
|
*/ |
|
#define WRR_ADDR 0xfffff61a |
|
#define WRR WORD_REF(WRR_ADDR) |
|
|
|
/* |
|
* Watchdog Counter Register |
|
*/ |
|
#define WCN_ADDR 0xfffff61c |
|
#define WCN WORD_REF(WCN_ADDR) |
|
|
|
/* |
|
* Watchdog Control and Status Register |
|
*/ |
|
#define WCSR_ADDR 0xfffff618 |
|
#define WCSR WORD_REF(WCSR_ADDR) |
|
|
|
#define WCSR_WDEN 0x0001 /* Watchdog Enable */ |
|
#define WCSR_FI 0x0002 /* Forced Interrupt (instead of SW reset)*/ |
|
#define WCSR_WRST 0x0004 /* Watchdog Reset */ |
|
|
|
/********** |
|
* |
|
* 0xFFFFF7xx -- Serial Peripheral Interface Slave (SPIS) |
|
* |
|
**********/ |
|
|
|
/* |
|
* SPI Slave Register |
|
*/ |
|
#define SPISR_ADDR 0xfffff700 |
|
#define SPISR WORD_REF(SPISR_ADDR) |
|
|
|
#define SPISR_DATA_ADDR 0xfffff701 |
|
#define SPISR_DATA BYTE_REF(SPISR_DATA_ADDR) |
|
|
|
#define SPISR_DATA_MASK 0x00ff /* Shifted data from the external device */ |
|
#define SPISR_DATA_SHIFT 0 |
|
#define SPISR_SPISEN 0x0100 /* SPIS module enable */ |
|
#define SPISR_POL 0x0200 /* SPSCLK polarity control */ |
|
#define SPISR_PHA 0x0400 /* Phase relationship between SPSCLK & SPSRxD */ |
|
#define SPISR_OVWR 0x0800 /* Data buffer has been overwritten */ |
|
#define SPISR_DATARDY 0x1000 /* Data ready */ |
|
#define SPISR_ENPOL 0x2000 /* Enable Polarity */ |
|
#define SPISR_IRQEN 0x4000 /* SPIS IRQ Enable */ |
|
#define SPISR_SPISIRQ 0x8000 /* SPIS IRQ posted */ |
|
|
|
/********** |
|
* |
|
* 0xFFFFF8xx -- Serial Peripheral Interface Master (SPIM) |
|
* |
|
**********/ |
|
|
|
/* |
|
* SPIM Data Register |
|
*/ |
|
#define SPIMDATA_ADDR 0xfffff800 |
|
#define SPIMDATA WORD_REF(SPIMDATA_ADDR) |
|
|
|
/* |
|
* SPIM Control/Status Register |
|
*/ |
|
#define SPIMCONT_ADDR 0xfffff802 |
|
#define SPIMCONT WORD_REF(SPIMCONT_ADDR) |
|
|
|
#define SPIMCONT_BIT_COUNT_MASK 0x000f /* Transfer Length in Bytes */ |
|
#define SPIMCONT_BIT_COUNT_SHIFT 0 |
|
#define SPIMCONT_POL 0x0010 /* SPMCLK Signel Polarity */ |
|
#define SPIMCONT_PHA 0x0020 /* Clock/Data phase relationship */ |
|
#define SPIMCONT_IRQEN 0x0040 /* IRQ Enable */ |
|
#define SPIMCONT_SPIMIRQ 0x0080 /* Interrupt Request */ |
|
#define SPIMCONT_XCH 0x0100 /* Exchange */ |
|
#define SPIMCONT_RSPIMEN 0x0200 /* Enable SPIM */ |
|
#define SPIMCONT_DATA_RATE_MASK 0xe000 /* SPIM Data Rate */ |
|
#define SPIMCONT_DATA_RATE_SHIFT 13 |
|
|
|
/* 'EZ328-compatible definitions */ |
|
#define SPIMCONT_IRQ SPIMCONT_SPIMIRQ |
|
#define SPIMCONT_ENABLE SPIMCONT_SPIMEN |
|
/********** |
|
* |
|
* 0xFFFFF9xx -- UART |
|
* |
|
**********/ |
|
|
|
/* |
|
* UART Status/Control Register |
|
*/ |
|
#define USTCNT_ADDR 0xfffff900 |
|
#define USTCNT WORD_REF(USTCNT_ADDR) |
|
|
|
#define USTCNT_TXAVAILEN 0x0001 /* Transmitter Available Int Enable */ |
|
#define USTCNT_TXHALFEN 0x0002 /* Transmitter Half Empty Int Enable */ |
|
#define USTCNT_TXEMPTYEN 0x0004 /* Transmitter Empty Int Enable */ |
|
#define USTCNT_RXREADYEN 0x0008 /* Receiver Ready Interrupt Enable */ |
|
#define USTCNT_RXHALFEN 0x0010 /* Receiver Half-Full Int Enable */ |
|
#define USTCNT_RXFULLEN 0x0020 /* Receiver Full Interrupt Enable */ |
|
#define USTCNT_CTSDELTAEN 0x0040 /* CTS Delta Interrupt Enable */ |
|
#define USTCNT_GPIODELTAEN 0x0080 /* Old Data Interrupt Enable */ |
|
#define USTCNT_8_7 0x0100 /* Eight or seven-bit transmission */ |
|
#define USTCNT_STOP 0x0200 /* Stop bit transmission */ |
|
#define USTCNT_ODD_EVEN 0x0400 /* Odd Parity */ |
|
#define USTCNT_PARITYEN 0x0800 /* Parity Enable */ |
|
#define USTCNT_CLKMODE 0x1000 /* Clock Mode Select */ |
|
#define USTCNT_TXEN 0x2000 /* Transmitter Enable */ |
|
#define USTCNT_RXEN 0x4000 /* Receiver Enable */ |
|
#define USTCNT_UARTEN 0x8000 /* UART Enable */ |
|
|
|
/* 'EZ328-compatible definitions */ |
|
#define USTCNT_TXAE USTCNT_TXAVAILEN |
|
#define USTCNT_TXHE USTCNT_TXHALFEN |
|
#define USTCNT_TXEE USTCNT_TXEMPTYEN |
|
#define USTCNT_RXRE USTCNT_RXREADYEN |
|
#define USTCNT_RXHE USTCNT_RXHALFEN |
|
#define USTCNT_RXFE USTCNT_RXFULLEN |
|
#define USTCNT_CTSD USTCNT_CTSDELTAEN |
|
#define USTCNT_ODD USTCNT_ODD_EVEN |
|
#define USTCNT_PEN USTCNT_PARITYEN |
|
#define USTCNT_CLKM USTCNT_CLKMODE |
|
#define USTCNT_UEN USTCNT_UARTEN |
|
|
|
/* |
|
* UART Baud Control Register |
|
*/ |
|
#define UBAUD_ADDR 0xfffff902 |
|
#define UBAUD WORD_REF(UBAUD_ADDR) |
|
|
|
#define UBAUD_PRESCALER_MASK 0x003f /* Actual divisor is 65 - PRESCALER */ |
|
#define UBAUD_PRESCALER_SHIFT 0 |
|
#define UBAUD_DIVIDE_MASK 0x0700 /* Baud Rate freq. divisor */ |
|
#define UBAUD_DIVIDE_SHIFT 8 |
|
#define UBAUD_BAUD_SRC 0x0800 /* Baud Rate Source */ |
|
#define UBAUD_GPIOSRC 0x1000 /* GPIO source */ |
|
#define UBAUD_GPIODIR 0x2000 /* GPIO Direction */ |
|
#define UBAUD_GPIO 0x4000 /* Current GPIO pin status */ |
|
#define UBAUD_GPIODELTA 0x8000 /* GPIO pin value changed */ |
|
|
|
/* |
|
* UART Receiver Register |
|
*/ |
|
#define URX_ADDR 0xfffff904 |
|
#define URX WORD_REF(URX_ADDR) |
|
|
|
#define URX_RXDATA_ADDR 0xfffff905 |
|
#define URX_RXDATA BYTE_REF(URX_RXDATA_ADDR) |
|
|
|
#define URX_RXDATA_MASK 0x00ff /* Received data */ |
|
#define URX_RXDATA_SHIFT 0 |
|
#define URX_PARITY_ERROR 0x0100 /* Parity Error */ |
|
#define URX_BREAK 0x0200 /* Break Detected */ |
|
#define URX_FRAME_ERROR 0x0400 /* Framing Error */ |
|
#define URX_OVRUN 0x0800 /* Serial Overrun */ |
|
#define URX_DATA_READY 0x2000 /* Data Ready (FIFO not empty) */ |
|
#define URX_FIFO_HALF 0x4000 /* FIFO is Half-Full */ |
|
#define URX_FIFO_FULL 0x8000 /* FIFO is Full */ |
|
|
|
/* |
|
* UART Transmitter Register |
|
*/ |
|
#define UTX_ADDR 0xfffff906 |
|
#define UTX WORD_REF(UTX_ADDR) |
|
|
|
#define UTX_TXDATA_ADDR 0xfffff907 |
|
#define UTX_TXDATA BYTE_REF(UTX_TXDATA_ADDR) |
|
|
|
#define UTX_TXDATA_MASK 0x00ff /* Data to be transmitted */ |
|
#define UTX_TXDATA_SHIFT 0 |
|
#define UTX_CTS_DELTA 0x0100 /* CTS changed */ |
|
#define UTX_CTS_STATUS 0x0200 /* CTS State */ |
|
#define UTX_IGNORE_CTS 0x0800 /* Ignore CTS */ |
|
#define UTX_SEND_BREAK 0x1000 /* Send a BREAK */ |
|
#define UTX_TX_AVAIL 0x2000 /* Transmit FIFO has a slot available */ |
|
#define UTX_FIFO_HALF 0x4000 /* Transmit FIFO is half empty */ |
|
#define UTX_FIFO_EMPTY 0x8000 /* Transmit FIFO is empty */ |
|
|
|
/* 'EZ328-compatible definitions */ |
|
#define UTX_CTS_STAT UTX_CTS_STATUS |
|
#define UTX_NOCTS UTX_IGNORE_CTS |
|
|
|
/* |
|
* UART Miscellaneous Register |
|
*/ |
|
#define UMISC_ADDR 0xfffff908 |
|
#define UMISC WORD_REF(UMISC_ADDR) |
|
|
|
#define UMISC_TX_POL 0x0004 /* Transmit Polarity */ |
|
#define UMISC_RX_POL 0x0008 /* Receive Polarity */ |
|
#define UMISC_IRDA_LOOP 0x0010 /* IrDA Loopback Enable */ |
|
#define UMISC_IRDA_EN 0x0020 /* Infra-Red Enable */ |
|
#define UMISC_RTS 0x0040 /* Set RTS status */ |
|
#define UMISC_RTSCONT 0x0080 /* Choose RTS control */ |
|
#define UMISC_LOOP 0x1000 /* Serial Loopback Enable */ |
|
#define UMISC_FORCE_PERR 0x2000 /* Force Parity Error */ |
|
#define UMISC_CLKSRC 0x4000 /* Clock Source */ |
|
|
|
|
|
/* generalization of uart control registers to support multiple ports: */ |
|
typedef volatile struct { |
|
volatile unsigned short int ustcnt; |
|
volatile unsigned short int ubaud; |
|
union { |
|
volatile unsigned short int w; |
|
struct { |
|
volatile unsigned char status; |
|
volatile unsigned char rxdata; |
|
} b; |
|
} urx; |
|
union { |
|
volatile unsigned short int w; |
|
struct { |
|
volatile unsigned char status; |
|
volatile unsigned char txdata; |
|
} b; |
|
} utx; |
|
volatile unsigned short int umisc; |
|
volatile unsigned short int pad1; |
|
volatile unsigned short int pad2; |
|
volatile unsigned short int pad3; |
|
} __packed m68328_uart; |
|
|
|
|
|
/********** |
|
* |
|
* 0xFFFFFAxx -- LCD Controller |
|
* |
|
**********/ |
|
|
|
/* |
|
* LCD Screen Starting Address Register |
|
*/ |
|
#define LSSA_ADDR 0xfffffa00 |
|
#define LSSA LONG_REF(LSSA_ADDR) |
|
|
|
#define LSSA_SSA_MASK 0xfffffffe /* Bit 0 is reserved */ |
|
|
|
/* |
|
* LCD Virtual Page Width Register |
|
*/ |
|
#define LVPW_ADDR 0xfffffa05 |
|
#define LVPW BYTE_REF(LVPW_ADDR) |
|
|
|
/* |
|
* LCD Screen Width Register (not compatible with 'EZ328 !!!) |
|
*/ |
|
#define LXMAX_ADDR 0xfffffa08 |
|
#define LXMAX WORD_REF(LXMAX_ADDR) |
|
|
|
#define LXMAX_XM_MASK 0x02ff /* Bits 0-3 are reserved */ |
|
|
|
/* |
|
* LCD Screen Height Register |
|
*/ |
|
#define LYMAX_ADDR 0xfffffa0a |
|
#define LYMAX WORD_REF(LYMAX_ADDR) |
|
|
|
#define LYMAX_YM_MASK 0x02ff /* Bits 10-15 are reserved */ |
|
|
|
/* |
|
* LCD Cursor X Position Register |
|
*/ |
|
#define LCXP_ADDR 0xfffffa18 |
|
#define LCXP WORD_REF(LCXP_ADDR) |
|
|
|
#define LCXP_CC_MASK 0xc000 /* Cursor Control */ |
|
#define LCXP_CC_TRAMSPARENT 0x0000 |
|
#define LCXP_CC_BLACK 0x4000 |
|
#define LCXP_CC_REVERSED 0x8000 |
|
#define LCXP_CC_WHITE 0xc000 |
|
#define LCXP_CXP_MASK 0x02ff /* Cursor X position */ |
|
|
|
/* |
|
* LCD Cursor Y Position Register |
|
*/ |
|
#define LCYP_ADDR 0xfffffa1a |
|
#define LCYP WORD_REF(LCYP_ADDR) |
|
|
|
#define LCYP_CYP_MASK 0x01ff /* Cursor Y Position */ |
|
|
|
/* |
|
* LCD Cursor Width and Heigth Register |
|
*/ |
|
#define LCWCH_ADDR 0xfffffa1c |
|
#define LCWCH WORD_REF(LCWCH_ADDR) |
|
|
|
#define LCWCH_CH_MASK 0x001f /* Cursor Height */ |
|
#define LCWCH_CH_SHIFT 0 |
|
#define LCWCH_CW_MASK 0x1f00 /* Cursor Width */ |
|
#define LCWCH_CW_SHIFT 8 |
|
|
|
/* |
|
* LCD Blink Control Register |
|
*/ |
|
#define LBLKC_ADDR 0xfffffa1f |
|
#define LBLKC BYTE_REF(LBLKC_ADDR) |
|
|
|
#define LBLKC_BD_MASK 0x7f /* Blink Divisor */ |
|
#define LBLKC_BD_SHIFT 0 |
|
#define LBLKC_BKEN 0x80 /* Blink Enabled */ |
|
|
|
/* |
|
* LCD Panel Interface Configuration Register |
|
*/ |
|
#define LPICF_ADDR 0xfffffa20 |
|
#define LPICF BYTE_REF(LPICF_ADDR) |
|
|
|
#define LPICF_GS_MASK 0x01 /* Gray-Scale Mode */ |
|
#define LPICF_GS_BW 0x00 |
|
#define LPICF_GS_GRAY_4 0x01 |
|
#define LPICF_PBSIZ_MASK 0x06 /* Panel Bus Width */ |
|
#define LPICF_PBSIZ_1 0x00 |
|
#define LPICF_PBSIZ_2 0x02 |
|
#define LPICF_PBSIZ_4 0x04 |
|
|
|
/* |
|
* LCD Polarity Configuration Register |
|
*/ |
|
#define LPOLCF_ADDR 0xfffffa21 |
|
#define LPOLCF BYTE_REF(LPOLCF_ADDR) |
|
|
|
#define LPOLCF_PIXPOL 0x01 /* Pixel Polarity */ |
|
#define LPOLCF_LPPOL 0x02 /* Line Pulse Polarity */ |
|
#define LPOLCF_FLMPOL 0x04 /* Frame Marker Polarity */ |
|
#define LPOLCF_LCKPOL 0x08 /* LCD Shift Lock Polarity */ |
|
|
|
/* |
|
* LACD (LCD Alternate Crystal Direction) Rate Control Register |
|
*/ |
|
#define LACDRC_ADDR 0xfffffa23 |
|
#define LACDRC BYTE_REF(LACDRC_ADDR) |
|
|
|
#define LACDRC_ACD_MASK 0x0f /* Alternate Crystal Direction Control */ |
|
#define LACDRC_ACD_SHIFT 0 |
|
|
|
/* |
|
* LCD Pixel Clock Divider Register |
|
*/ |
|
#define LPXCD_ADDR 0xfffffa25 |
|
#define LPXCD BYTE_REF(LPXCD_ADDR) |
|
|
|
#define LPXCD_PCD_MASK 0x3f /* Pixel Clock Divider */ |
|
#define LPXCD_PCD_SHIFT 0 |
|
|
|
/* |
|
* LCD Clocking Control Register |
|
*/ |
|
#define LCKCON_ADDR 0xfffffa27 |
|
#define LCKCON BYTE_REF(LCKCON_ADDR) |
|
|
|
#define LCKCON_PCDS 0x01 /* Pixel Clock Divider Source Select */ |
|
#define LCKCON_DWIDTH 0x02 /* Display Memory Width */ |
|
#define LCKCON_DWS_MASK 0x3c /* Display Wait-State */ |
|
#define LCKCON_DWS_SHIFT 2 |
|
#define LCKCON_DMA16 0x40 /* DMA burst length */ |
|
#define LCKCON_LCDON 0x80 /* Enable LCD Controller */ |
|
|
|
/* 'EZ328-compatible definitions */ |
|
#define LCKCON_DW_MASK LCKCON_DWS_MASK |
|
#define LCKCON_DW_SHIFT LCKCON_DWS_SHIFT |
|
|
|
/* |
|
* LCD Last Buffer Address Register |
|
*/ |
|
#define LLBAR_ADDR 0xfffffa29 |
|
#define LLBAR BYTE_REF(LLBAR_ADDR) |
|
|
|
#define LLBAR_LBAR_MASK 0x7f /* Number of memory words to fill 1 line */ |
|
#define LLBAR_LBAR_SHIFT 0 |
|
|
|
/* |
|
* LCD Octet Terminal Count Register |
|
*/ |
|
#define LOTCR_ADDR 0xfffffa2b |
|
#define LOTCR BYTE_REF(LOTCR_ADDR) |
|
|
|
/* |
|
* LCD Panning Offset Register |
|
*/ |
|
#define LPOSR_ADDR 0xfffffa2d |
|
#define LPOSR BYTE_REF(LPOSR_ADDR) |
|
|
|
#define LPOSR_BOS 0x08 /* Byte offset (for B/W mode only */ |
|
#define LPOSR_POS_MASK 0x07 /* Pixel Offset Code */ |
|
#define LPOSR_POS_SHIFT 0 |
|
|
|
/* |
|
* LCD Frame Rate Control Modulation Register |
|
*/ |
|
#define LFRCM_ADDR 0xfffffa31 |
|
#define LFRCM BYTE_REF(LFRCM_ADDR) |
|
|
|
#define LFRCM_YMOD_MASK 0x0f /* Vertical Modulation */ |
|
#define LFRCM_YMOD_SHIFT 0 |
|
#define LFRCM_XMOD_MASK 0xf0 /* Horizontal Modulation */ |
|
#define LFRCM_XMOD_SHIFT 4 |
|
|
|
/* |
|
* LCD Gray Palette Mapping Register |
|
*/ |
|
#define LGPMR_ADDR 0xfffffa32 |
|
#define LGPMR WORD_REF(LGPMR_ADDR) |
|
|
|
#define LGPMR_GLEVEL3_MASK 0x000f |
|
#define LGPMR_GLEVEL3_SHIFT 0 |
|
#define LGPMR_GLEVEL2_MASK 0x00f0 |
|
#define LGPMR_GLEVEL2_SHIFT 4 |
|
#define LGPMR_GLEVEL0_MASK 0x0f00 |
|
#define LGPMR_GLEVEL0_SHIFT 8 |
|
#define LGPMR_GLEVEL1_MASK 0xf000 |
|
#define LGPMR_GLEVEL1_SHIFT 12 |
|
|
|
/********** |
|
* |
|
* 0xFFFFFBxx -- Real-Time Clock (RTC) |
|
* |
|
**********/ |
|
|
|
/* |
|
* RTC Hours Minutes and Seconds Register |
|
*/ |
|
#define RTCTIME_ADDR 0xfffffb00 |
|
#define RTCTIME LONG_REF(RTCTIME_ADDR) |
|
|
|
#define RTCTIME_SECONDS_MASK 0x0000003f /* Seconds */ |
|
#define RTCTIME_SECONDS_SHIFT 0 |
|
#define RTCTIME_MINUTES_MASK 0x003f0000 /* Minutes */ |
|
#define RTCTIME_MINUTES_SHIFT 16 |
|
#define RTCTIME_HOURS_MASK 0x1f000000 /* Hours */ |
|
#define RTCTIME_HOURS_SHIFT 24 |
|
|
|
/* |
|
* RTC Alarm Register |
|
*/ |
|
#define RTCALRM_ADDR 0xfffffb04 |
|
#define RTCALRM LONG_REF(RTCALRM_ADDR) |
|
|
|
#define RTCALRM_SECONDS_MASK 0x0000003f /* Seconds */ |
|
#define RTCALRM_SECONDS_SHIFT 0 |
|
#define RTCALRM_MINUTES_MASK 0x003f0000 /* Minutes */ |
|
#define RTCALRM_MINUTES_SHIFT 16 |
|
#define RTCALRM_HOURS_MASK 0x1f000000 /* Hours */ |
|
#define RTCALRM_HOURS_SHIFT 24 |
|
|
|
/* |
|
* RTC Control Register |
|
*/ |
|
#define RTCCTL_ADDR 0xfffffb0c |
|
#define RTCCTL WORD_REF(RTCCTL_ADDR) |
|
|
|
#define RTCCTL_384 0x0020 /* Crystal Selection */ |
|
#define RTCCTL_ENABLE 0x0080 /* RTC Enable */ |
|
|
|
/* 'EZ328-compatible definitions */ |
|
#define RTCCTL_XTL RTCCTL_384 |
|
#define RTCCTL_EN RTCCTL_ENABLE |
|
|
|
/* |
|
* RTC Interrupt Status Register |
|
*/ |
|
#define RTCISR_ADDR 0xfffffb0e |
|
#define RTCISR WORD_REF(RTCISR_ADDR) |
|
|
|
#define RTCISR_SW 0x0001 /* Stopwatch timed out */ |
|
#define RTCISR_MIN 0x0002 /* 1-minute interrupt has occurred */ |
|
#define RTCISR_ALM 0x0004 /* Alarm interrupt has occurred */ |
|
#define RTCISR_DAY 0x0008 /* 24-hour rollover interrupt has occurred */ |
|
#define RTCISR_1HZ 0x0010 /* 1Hz interrupt has occurred */ |
|
|
|
/* |
|
* RTC Interrupt Enable Register |
|
*/ |
|
#define RTCIENR_ADDR 0xfffffb10 |
|
#define RTCIENR WORD_REF(RTCIENR_ADDR) |
|
|
|
#define RTCIENR_SW 0x0001 /* Stopwatch interrupt enable */ |
|
#define RTCIENR_MIN 0x0002 /* 1-minute interrupt enable */ |
|
#define RTCIENR_ALM 0x0004 /* Alarm interrupt enable */ |
|
#define RTCIENR_DAY 0x0008 /* 24-hour rollover interrupt enable */ |
|
#define RTCIENR_1HZ 0x0010 /* 1Hz interrupt enable */ |
|
|
|
/* |
|
* Stopwatch Minutes Register |
|
*/ |
|
#define STPWCH_ADDR 0xfffffb12 |
|
#define STPWCH WORD_REF(STPWCH) |
|
|
|
#define STPWCH_CNT_MASK 0x00ff /* Stopwatch countdown value */ |
|
#define SPTWCH_CNT_SHIFT 0 |
|
|
|
#endif /* _MC68328_H_ */
|
|
|