mirror of https://github.com/Qortal/Brooklyn
You can not select more than 25 topics
Topics must start with a letter or number, can include dashes ('-') and can be up to 35 characters long.
937 lines
16 KiB
937 lines
16 KiB
// SPDX-License-Identifier: GPL-2.0 |
|
/* |
|
* Device Tree Source for common parts of Salvator-X board variants |
|
* |
|
* Copyright (C) 2015-2016 Renesas Electronics Corp. |
|
*/ |
|
|
|
/* |
|
* SSI-AK4613 |
|
* |
|
* This command is required when Playback/Capture |
|
* |
|
* amixer set "DVC Out" 100% |
|
* amixer set "DVC In" 100% |
|
* |
|
* You can use Mute |
|
* |
|
* amixer set "DVC Out Mute" on |
|
* amixer set "DVC In Mute" on |
|
* |
|
* You can use Volume Ramp |
|
* |
|
* amixer set "DVC Out Ramp Up Rate" "0.125 dB/64 steps" |
|
* amixer set "DVC Out Ramp Down Rate" "0.125 dB/512 steps" |
|
* amixer set "DVC Out Ramp" on |
|
* aplay xxx.wav & |
|
* amixer set "DVC Out" 80% // Volume Down |
|
* amixer set "DVC Out" 100% // Volume Up |
|
*/ |
|
|
|
#include <dt-bindings/gpio/gpio.h> |
|
#include <dt-bindings/input/input.h> |
|
|
|
/ { |
|
aliases { |
|
serial0 = &scif2; |
|
serial1 = &hscif1; |
|
ethernet0 = &avb; |
|
mmc0 = &sdhi2; |
|
mmc1 = &sdhi0; |
|
mmc2 = &sdhi3; |
|
}; |
|
|
|
chosen { |
|
bootargs = "ignore_loglevel rw root=/dev/nfs ip=on"; |
|
stdout-path = "serial0:115200n8"; |
|
}; |
|
|
|
audio_clkout: audio-clkout { |
|
/* |
|
* This is same as <&rcar_sound 0> |
|
* but needed to avoid cs2000/rcar_sound probe dead-lock |
|
*/ |
|
compatible = "fixed-clock"; |
|
#clock-cells = <0>; |
|
clock-frequency = <12288000>; |
|
}; |
|
|
|
backlight: backlight { |
|
compatible = "pwm-backlight"; |
|
pwms = <&pwm1 0 50000>; |
|
|
|
brightness-levels = <256 128 64 16 8 4 0>; |
|
default-brightness-level = <6>; |
|
|
|
power-supply = <®_12v>; |
|
enable-gpios = <&gpio6 7 GPIO_ACTIVE_HIGH>; |
|
}; |
|
|
|
cvbs-in { |
|
compatible = "composite-video-connector"; |
|
label = "CVBS IN"; |
|
|
|
port { |
|
cvbs_con: endpoint { |
|
remote-endpoint = <&adv7482_ain7>; |
|
}; |
|
}; |
|
}; |
|
|
|
hdmi-in { |
|
compatible = "hdmi-connector"; |
|
label = "HDMI IN"; |
|
type = "a"; |
|
|
|
port { |
|
hdmi_in_con: endpoint { |
|
remote-endpoint = <&adv7482_hdmi>; |
|
}; |
|
}; |
|
}; |
|
|
|
hdmi0-out { |
|
compatible = "hdmi-connector"; |
|
label = "HDMI0 OUT"; |
|
type = "a"; |
|
|
|
port { |
|
hdmi0_con: endpoint { |
|
}; |
|
}; |
|
}; |
|
|
|
hdmi1-out { |
|
compatible = "hdmi-connector"; |
|
label = "HDMI1 OUT"; |
|
type = "a"; |
|
|
|
port { |
|
hdmi1_con: endpoint { |
|
}; |
|
}; |
|
}; |
|
|
|
keys { |
|
compatible = "gpio-keys"; |
|
|
|
pinctrl-0 = <&keys_pins>; |
|
pinctrl-names = "default"; |
|
|
|
key-1 { |
|
gpios = <&gpio5 17 GPIO_ACTIVE_LOW>; |
|
linux,code = <KEY_1>; |
|
label = "SW4-1"; |
|
wakeup-source; |
|
debounce-interval = <20>; |
|
}; |
|
key-2 { |
|
gpios = <&gpio5 20 GPIO_ACTIVE_LOW>; |
|
linux,code = <KEY_2>; |
|
label = "SW4-2"; |
|
wakeup-source; |
|
debounce-interval = <20>; |
|
}; |
|
key-3 { |
|
gpios = <&gpio5 22 GPIO_ACTIVE_LOW>; |
|
linux,code = <KEY_3>; |
|
label = "SW4-3"; |
|
wakeup-source; |
|
debounce-interval = <20>; |
|
}; |
|
key-4 { |
|
gpios = <&gpio5 23 GPIO_ACTIVE_LOW>; |
|
linux,code = <KEY_4>; |
|
label = "SW4-4"; |
|
wakeup-source; |
|
debounce-interval = <20>; |
|
}; |
|
key-a { |
|
gpios = <&gpio6 11 GPIO_ACTIVE_LOW>; |
|
linux,code = <KEY_A>; |
|
label = "TSW0"; |
|
wakeup-source; |
|
debounce-interval = <20>; |
|
}; |
|
key-b { |
|
gpios = <&gpio6 12 GPIO_ACTIVE_LOW>; |
|
linux,code = <KEY_B>; |
|
label = "TSW1"; |
|
wakeup-source; |
|
debounce-interval = <20>; |
|
}; |
|
key-c { |
|
gpios = <&gpio6 13 GPIO_ACTIVE_LOW>; |
|
linux,code = <KEY_C>; |
|
label = "TSW2"; |
|
wakeup-source; |
|
debounce-interval = <20>; |
|
}; |
|
}; |
|
|
|
reg_1p8v: regulator0 { |
|
compatible = "regulator-fixed"; |
|
regulator-name = "fixed-1.8V"; |
|
regulator-min-microvolt = <1800000>; |
|
regulator-max-microvolt = <1800000>; |
|
regulator-boot-on; |
|
regulator-always-on; |
|
}; |
|
|
|
reg_3p3v: regulator1 { |
|
compatible = "regulator-fixed"; |
|
regulator-name = "fixed-3.3V"; |
|
regulator-min-microvolt = <3300000>; |
|
regulator-max-microvolt = <3300000>; |
|
regulator-boot-on; |
|
regulator-always-on; |
|
}; |
|
|
|
reg_12v: regulator2 { |
|
compatible = "regulator-fixed"; |
|
regulator-name = "fixed-12V"; |
|
regulator-min-microvolt = <12000000>; |
|
regulator-max-microvolt = <12000000>; |
|
regulator-boot-on; |
|
regulator-always-on; |
|
}; |
|
|
|
sound_card: sound { |
|
compatible = "audio-graph-card"; |
|
|
|
label = "rcar-sound"; |
|
|
|
dais = <&rsnd_port0>; |
|
}; |
|
|
|
vbus0_usb2: regulator-vbus0-usb2 { |
|
compatible = "regulator-fixed"; |
|
|
|
regulator-name = "USB20_VBUS0"; |
|
regulator-min-microvolt = <5000000>; |
|
regulator-max-microvolt = <5000000>; |
|
|
|
gpio = <&gpio6 16 GPIO_ACTIVE_HIGH>; |
|
enable-active-high; |
|
}; |
|
|
|
vcc_sdhi0: regulator-vcc-sdhi0 { |
|
compatible = "regulator-fixed"; |
|
|
|
regulator-name = "SDHI0 Vcc"; |
|
regulator-min-microvolt = <3300000>; |
|
regulator-max-microvolt = <3300000>; |
|
|
|
gpio = <&gpio5 2 GPIO_ACTIVE_HIGH>; |
|
enable-active-high; |
|
}; |
|
|
|
vccq_sdhi0: regulator-vccq-sdhi0 { |
|
compatible = "regulator-gpio"; |
|
|
|
regulator-name = "SDHI0 VccQ"; |
|
regulator-min-microvolt = <1800000>; |
|
regulator-max-microvolt = <3300000>; |
|
|
|
gpios = <&gpio5 1 GPIO_ACTIVE_HIGH>; |
|
gpios-states = <1>; |
|
states = <3300000 1>, <1800000 0>; |
|
}; |
|
|
|
vcc_sdhi3: regulator-vcc-sdhi3 { |
|
compatible = "regulator-fixed"; |
|
|
|
regulator-name = "SDHI3 Vcc"; |
|
regulator-min-microvolt = <3300000>; |
|
regulator-max-microvolt = <3300000>; |
|
|
|
gpio = <&gpio3 15 GPIO_ACTIVE_HIGH>; |
|
enable-active-high; |
|
}; |
|
|
|
vccq_sdhi3: regulator-vccq-sdhi3 { |
|
compatible = "regulator-gpio"; |
|
|
|
regulator-name = "SDHI3 VccQ"; |
|
regulator-min-microvolt = <1800000>; |
|
regulator-max-microvolt = <3300000>; |
|
|
|
gpios = <&gpio3 14 GPIO_ACTIVE_HIGH>; |
|
gpios-states = <1>; |
|
states = <3300000 1>, <1800000 0>; |
|
}; |
|
|
|
vga { |
|
compatible = "vga-connector"; |
|
|
|
port { |
|
vga_in: endpoint { |
|
remote-endpoint = <&adv7123_out>; |
|
}; |
|
}; |
|
}; |
|
|
|
vga-encoder { |
|
compatible = "adi,adv7123"; |
|
|
|
ports { |
|
#address-cells = <1>; |
|
#size-cells = <0>; |
|
|
|
port@0 { |
|
reg = <0>; |
|
adv7123_in: endpoint { |
|
remote-endpoint = <&du_out_rgb>; |
|
}; |
|
}; |
|
port@1 { |
|
reg = <1>; |
|
adv7123_out: endpoint { |
|
remote-endpoint = <&vga_in>; |
|
}; |
|
}; |
|
}; |
|
}; |
|
|
|
x12_clk: x12 { |
|
compatible = "fixed-clock"; |
|
#clock-cells = <0>; |
|
clock-frequency = <24576000>; |
|
}; |
|
|
|
/* External DU dot clocks */ |
|
x21_clk: x21-clock { |
|
compatible = "fixed-clock"; |
|
#clock-cells = <0>; |
|
clock-frequency = <33000000>; |
|
}; |
|
|
|
x22_clk: x22-clock { |
|
compatible = "fixed-clock"; |
|
#clock-cells = <0>; |
|
clock-frequency = <33000000>; |
|
}; |
|
|
|
x23_clk: x23-clock { |
|
compatible = "fixed-clock"; |
|
#clock-cells = <0>; |
|
clock-frequency = <25000000>; |
|
}; |
|
}; |
|
|
|
&audio_clk_a { |
|
clock-frequency = <22579200>; |
|
}; |
|
|
|
&avb { |
|
pinctrl-0 = <&avb_pins>; |
|
pinctrl-names = "default"; |
|
phy-handle = <&phy0>; |
|
tx-internal-delay-ps = <2000>; |
|
status = "okay"; |
|
|
|
phy0: ethernet-phy@0 { |
|
rxc-skew-ps = <1500>; |
|
reg = <0>; |
|
interrupt-parent = <&gpio2>; |
|
interrupts = <11 IRQ_TYPE_LEVEL_LOW>; |
|
reset-gpios = <&gpio2 10 GPIO_ACTIVE_LOW>; |
|
}; |
|
}; |
|
|
|
&csi20 { |
|
status = "okay"; |
|
|
|
ports { |
|
port@0 { |
|
reg = <0>; |
|
csi20_in: endpoint { |
|
clock-lanes = <0>; |
|
data-lanes = <1>; |
|
remote-endpoint = <&adv7482_txb>; |
|
}; |
|
}; |
|
}; |
|
}; |
|
|
|
&csi40 { |
|
status = "okay"; |
|
|
|
ports { |
|
port@0 { |
|
reg = <0>; |
|
|
|
csi40_in: endpoint { |
|
clock-lanes = <0>; |
|
data-lanes = <1 2 3 4>; |
|
remote-endpoint = <&adv7482_txa>; |
|
}; |
|
}; |
|
}; |
|
}; |
|
|
|
&du { |
|
pinctrl-0 = <&du_pins>; |
|
pinctrl-names = "default"; |
|
status = "okay"; |
|
|
|
ports { |
|
port@0 { |
|
endpoint { |
|
remote-endpoint = <&adv7123_in>; |
|
}; |
|
}; |
|
}; |
|
}; |
|
|
|
&ehci0 { |
|
dr_mode = "otg"; |
|
status = "okay"; |
|
}; |
|
|
|
&ehci1 { |
|
status = "okay"; |
|
}; |
|
|
|
&extalr_clk { |
|
clock-frequency = <32768>; |
|
}; |
|
|
|
&hscif1 { |
|
pinctrl-0 = <&hscif1_pins>; |
|
pinctrl-names = "default"; |
|
|
|
uart-has-rtscts; |
|
/* Please only enable hscif1 or scif1 */ |
|
status = "okay"; |
|
}; |
|
|
|
&hsusb { |
|
dr_mode = "otg"; |
|
status = "okay"; |
|
}; |
|
|
|
&i2c2 { |
|
pinctrl-0 = <&i2c2_pins>; |
|
pinctrl-names = "default"; |
|
|
|
status = "okay"; |
|
|
|
clock-frequency = <100000>; |
|
|
|
ak4613: codec@10 { |
|
compatible = "asahi-kasei,ak4613"; |
|
#sound-dai-cells = <0>; |
|
reg = <0x10>; |
|
clocks = <&rcar_sound 3>; |
|
|
|
asahi-kasei,in1-single-end; |
|
asahi-kasei,in2-single-end; |
|
asahi-kasei,out1-single-end; |
|
asahi-kasei,out2-single-end; |
|
asahi-kasei,out3-single-end; |
|
asahi-kasei,out4-single-end; |
|
asahi-kasei,out5-single-end; |
|
asahi-kasei,out6-single-end; |
|
|
|
port { |
|
ak4613_endpoint: endpoint { |
|
remote-endpoint = <&rsnd_endpoint0>; |
|
}; |
|
}; |
|
}; |
|
|
|
cs2000: clk_multiplier@4f { |
|
#clock-cells = <0>; |
|
compatible = "cirrus,cs2000-cp"; |
|
reg = <0x4f>; |
|
clocks = <&audio_clkout>, <&x12_clk>; |
|
clock-names = "clk_in", "ref_clk"; |
|
|
|
assigned-clocks = <&cs2000>; |
|
assigned-clock-rates = <24576000>; /* 1/1 divide */ |
|
}; |
|
}; |
|
|
|
&i2c4 { |
|
status = "okay"; |
|
|
|
pca9654: gpio@20 { |
|
compatible = "onnn,pca9654"; |
|
reg = <0x20>; |
|
gpio-controller; |
|
#gpio-cells = <2>; |
|
}; |
|
|
|
video-receiver@70 { |
|
compatible = "adi,adv7482"; |
|
reg = <0x70 0x71 0x72 0x73 0x74 0x75 |
|
0x60 0x61 0x62 0x63 0x64 0x65>; |
|
reg-names = "main", "dpll", "cp", "hdmi", "edid", "repeater", |
|
"infoframe", "cbus", "cec", "sdp", "txa", "txb" ; |
|
|
|
#address-cells = <1>; |
|
#size-cells = <0>; |
|
|
|
interrupt-parent = <&gpio6>; |
|
interrupt-names = "intrq1", "intrq2"; |
|
interrupts = <30 IRQ_TYPE_LEVEL_LOW>, |
|
<31 IRQ_TYPE_LEVEL_LOW>; |
|
|
|
port@7 { |
|
reg = <7>; |
|
|
|
adv7482_ain7: endpoint { |
|
remote-endpoint = <&cvbs_con>; |
|
}; |
|
}; |
|
|
|
port@8 { |
|
reg = <8>; |
|
|
|
adv7482_hdmi: endpoint { |
|
remote-endpoint = <&hdmi_in_con>; |
|
}; |
|
}; |
|
|
|
port@a { |
|
reg = <10>; |
|
|
|
adv7482_txa: endpoint { |
|
clock-lanes = <0>; |
|
data-lanes = <1 2 3 4>; |
|
remote-endpoint = <&csi40_in>; |
|
}; |
|
}; |
|
|
|
port@b { |
|
reg = <11>; |
|
|
|
adv7482_txb: endpoint { |
|
clock-lanes = <0>; |
|
data-lanes = <1>; |
|
remote-endpoint = <&csi20_in>; |
|
}; |
|
}; |
|
}; |
|
|
|
csa_vdd: adc@7c { |
|
compatible = "maxim,max9611"; |
|
reg = <0x7c>; |
|
|
|
shunt-resistor-micro-ohms = <5000>; |
|
}; |
|
|
|
csa_dvfs: adc@7f { |
|
compatible = "maxim,max9611"; |
|
reg = <0x7f>; |
|
|
|
shunt-resistor-micro-ohms = <5000>; |
|
}; |
|
}; |
|
|
|
&i2c_dvfs { |
|
status = "okay"; |
|
|
|
clock-frequency = <400000>; |
|
|
|
pmic: pmic@30 { |
|
pinctrl-0 = <&irq0_pins>; |
|
pinctrl-names = "default"; |
|
|
|
compatible = "rohm,bd9571mwv"; |
|
reg = <0x30>; |
|
interrupt-parent = <&intc_ex>; |
|
interrupts = <0 IRQ_TYPE_LEVEL_LOW>; |
|
interrupt-controller; |
|
#interrupt-cells = <2>; |
|
gpio-controller; |
|
#gpio-cells = <2>; |
|
rohm,ddr-backup-power = <0xf>; |
|
rohm,rstbmode-level; |
|
|
|
regulators { |
|
dvfs: dvfs { |
|
regulator-name = "dvfs"; |
|
regulator-min-microvolt = <750000>; |
|
regulator-max-microvolt = <1030000>; |
|
regulator-boot-on; |
|
regulator-always-on; |
|
}; |
|
}; |
|
}; |
|
|
|
eeprom@50 { |
|
compatible = "rohm,br24t01", "atmel,24c01"; |
|
reg = <0x50>; |
|
pagesize = <8>; |
|
}; |
|
}; |
|
|
|
&ohci0 { |
|
dr_mode = "otg"; |
|
status = "okay"; |
|
}; |
|
|
|
&ohci1 { |
|
status = "okay"; |
|
}; |
|
|
|
&pcie_bus_clk { |
|
clock-frequency = <100000000>; |
|
}; |
|
|
|
&pciec0 { |
|
status = "okay"; |
|
}; |
|
|
|
&pciec1 { |
|
status = "okay"; |
|
}; |
|
|
|
&pfc { |
|
pinctrl-0 = <&scif_clk_pins>; |
|
pinctrl-names = "default"; |
|
|
|
avb_pins: avb { |
|
mux { |
|
groups = "avb_link", "avb_mdio", "avb_mii"; |
|
function = "avb"; |
|
}; |
|
|
|
pins_mdio { |
|
groups = "avb_mdio"; |
|
drive-strength = <24>; |
|
}; |
|
|
|
pins_mii_tx { |
|
pins = "PIN_AVB_TX_CTL", "PIN_AVB_TXC", "PIN_AVB_TD0", |
|
"PIN_AVB_TD1", "PIN_AVB_TD2", "PIN_AVB_TD3"; |
|
drive-strength = <12>; |
|
}; |
|
}; |
|
|
|
du_pins: du { |
|
groups = "du_rgb888", "du_sync", "du_oddf", "du_clk_out_0"; |
|
function = "du"; |
|
}; |
|
|
|
hscif1_pins: hscif1 { |
|
groups = "hscif1_data_a", "hscif1_ctrl_a"; |
|
function = "hscif1"; |
|
}; |
|
|
|
i2c2_pins: i2c2 { |
|
groups = "i2c2_a"; |
|
function = "i2c2"; |
|
}; |
|
|
|
irq0_pins: irq0 { |
|
groups = "intc_ex_irq0"; |
|
function = "intc_ex"; |
|
}; |
|
|
|
keys_pins: keys { |
|
pins = "GP_5_17", "GP_5_20", "GP_5_22"; |
|
bias-pull-up; |
|
}; |
|
|
|
pwm1_pins: pwm1 { |
|
groups = "pwm1_a"; |
|
function = "pwm1"; |
|
}; |
|
|
|
scif1_pins: scif1 { |
|
groups = "scif1_data_a", "scif1_ctrl"; |
|
function = "scif1"; |
|
}; |
|
|
|
scif2_pins: scif2 { |
|
groups = "scif2_data_a"; |
|
function = "scif2"; |
|
}; |
|
|
|
scif_clk_pins: scif_clk { |
|
groups = "scif_clk_a"; |
|
function = "scif_clk"; |
|
}; |
|
|
|
sdhi0_pins: sd0 { |
|
groups = "sdhi0_data4", "sdhi0_ctrl"; |
|
function = "sdhi0"; |
|
power-source = <3300>; |
|
}; |
|
|
|
sdhi0_pins_uhs: sd0_uhs { |
|
groups = "sdhi0_data4", "sdhi0_ctrl"; |
|
function = "sdhi0"; |
|
power-source = <1800>; |
|
}; |
|
|
|
sdhi2_pins: sd2 { |
|
groups = "sdhi2_data8", "sdhi2_ctrl", "sdhi2_ds"; |
|
function = "sdhi2"; |
|
power-source = <1800>; |
|
}; |
|
|
|
sdhi3_pins: sd3 { |
|
groups = "sdhi3_data4", "sdhi3_ctrl"; |
|
function = "sdhi3"; |
|
power-source = <3300>; |
|
}; |
|
|
|
sdhi3_pins_uhs: sd3_uhs { |
|
groups = "sdhi3_data4", "sdhi3_ctrl"; |
|
function = "sdhi3"; |
|
power-source = <1800>; |
|
}; |
|
|
|
sound_pins: sound { |
|
groups = "ssi01239_ctrl", "ssi0_data", "ssi1_data_a"; |
|
function = "ssi"; |
|
}; |
|
|
|
sound_clk_pins: sound_clk { |
|
groups = "audio_clk_a_a", "audio_clk_b_a", "audio_clk_c_a", |
|
"audio_clkout_a", "audio_clkout3_a"; |
|
function = "audio_clk"; |
|
}; |
|
|
|
usb0_pins: usb0 { |
|
groups = "usb0"; |
|
function = "usb0"; |
|
}; |
|
|
|
usb1_pins: usb1 { |
|
mux { |
|
groups = "usb1"; |
|
function = "usb1"; |
|
}; |
|
|
|
ovc { |
|
pins = "GP_6_27"; |
|
bias-pull-up; |
|
}; |
|
|
|
pwen { |
|
pins = "GP_6_26"; |
|
bias-pull-down; |
|
}; |
|
}; |
|
|
|
usb30_pins: usb30 { |
|
groups = "usb30"; |
|
function = "usb30"; |
|
}; |
|
}; |
|
|
|
&pwm1 { |
|
pinctrl-0 = <&pwm1_pins>; |
|
pinctrl-names = "default"; |
|
|
|
status = "okay"; |
|
}; |
|
|
|
&rcar_sound { |
|
pinctrl-0 = <&sound_pins &sound_clk_pins>; |
|
pinctrl-names = "default"; |
|
|
|
/* Single DAI */ |
|
#sound-dai-cells = <0>; |
|
|
|
/* audio_clkout0/1/2/3 */ |
|
#clock-cells = <1>; |
|
clock-frequency = <12288000 11289600>; |
|
|
|
status = "okay"; |
|
|
|
/* update <audio_clk_b> to <cs2000> */ |
|
clocks = <&cpg CPG_MOD 1005>, |
|
<&cpg CPG_MOD 1006>, <&cpg CPG_MOD 1007>, |
|
<&cpg CPG_MOD 1008>, <&cpg CPG_MOD 1009>, |
|
<&cpg CPG_MOD 1010>, <&cpg CPG_MOD 1011>, |
|
<&cpg CPG_MOD 1012>, <&cpg CPG_MOD 1013>, |
|
<&cpg CPG_MOD 1014>, <&cpg CPG_MOD 1015>, |
|
<&cpg CPG_MOD 1022>, <&cpg CPG_MOD 1023>, |
|
<&cpg CPG_MOD 1024>, <&cpg CPG_MOD 1025>, |
|
<&cpg CPG_MOD 1026>, <&cpg CPG_MOD 1027>, |
|
<&cpg CPG_MOD 1028>, <&cpg CPG_MOD 1029>, |
|
<&cpg CPG_MOD 1030>, <&cpg CPG_MOD 1031>, |
|
<&cpg CPG_MOD 1020>, <&cpg CPG_MOD 1021>, |
|
<&cpg CPG_MOD 1020>, <&cpg CPG_MOD 1021>, |
|
<&cpg CPG_MOD 1019>, <&cpg CPG_MOD 1018>, |
|
<&audio_clk_a>, <&cs2000>, |
|
<&audio_clk_c>, |
|
<&cpg CPG_CORE CPG_AUDIO_CLK_I>; |
|
|
|
ports { |
|
#address-cells = <1>; |
|
#size-cells = <0>; |
|
rsnd_port0: port@0 { |
|
reg = <0>; |
|
rsnd_endpoint0: endpoint { |
|
remote-endpoint = <&ak4613_endpoint>; |
|
|
|
dai-format = "left_j"; |
|
bitclock-master = <&rsnd_endpoint0>; |
|
frame-master = <&rsnd_endpoint0>; |
|
|
|
playback = <&ssi0 &src0 &dvc0>; |
|
capture = <&ssi1 &src1 &dvc1>; |
|
}; |
|
}; |
|
}; |
|
}; |
|
|
|
&rwdt { |
|
timeout-sec = <60>; |
|
status = "okay"; |
|
}; |
|
|
|
&scif1 { |
|
pinctrl-0 = <&scif1_pins>; |
|
pinctrl-names = "default"; |
|
|
|
uart-has-rtscts; |
|
/* Please only enable hscif1 or scif1 */ |
|
/* status = "okay"; */ |
|
}; |
|
|
|
&scif2 { |
|
pinctrl-0 = <&scif2_pins>; |
|
pinctrl-names = "default"; |
|
|
|
status = "okay"; |
|
}; |
|
|
|
&scif_clk { |
|
clock-frequency = <14745600>; |
|
}; |
|
|
|
&sdhi0 { |
|
pinctrl-0 = <&sdhi0_pins>; |
|
pinctrl-1 = <&sdhi0_pins_uhs>; |
|
pinctrl-names = "default", "state_uhs"; |
|
|
|
vmmc-supply = <&vcc_sdhi0>; |
|
vqmmc-supply = <&vccq_sdhi0>; |
|
cd-gpios = <&gpio3 12 GPIO_ACTIVE_LOW>; |
|
wp-gpios = <&gpio3 13 GPIO_ACTIVE_HIGH>; |
|
bus-width = <4>; |
|
sd-uhs-sdr50; |
|
sd-uhs-sdr104; |
|
status = "okay"; |
|
}; |
|
|
|
&sdhi2 { |
|
/* used for on-board 8bit eMMC */ |
|
pinctrl-0 = <&sdhi2_pins>; |
|
pinctrl-1 = <&sdhi2_pins>; |
|
pinctrl-names = "default", "state_uhs"; |
|
|
|
vmmc-supply = <®_3p3v>; |
|
vqmmc-supply = <®_1p8v>; |
|
bus-width = <8>; |
|
mmc-hs200-1_8v; |
|
mmc-hs400-1_8v; |
|
no-sd; |
|
no-sdio; |
|
non-removable; |
|
fixed-emmc-driver-type = <1>; |
|
full-pwr-cycle-in-suspend; |
|
status = "okay"; |
|
}; |
|
|
|
&sdhi3 { |
|
pinctrl-0 = <&sdhi3_pins>; |
|
pinctrl-1 = <&sdhi3_pins_uhs>; |
|
pinctrl-names = "default", "state_uhs"; |
|
|
|
vmmc-supply = <&vcc_sdhi3>; |
|
vqmmc-supply = <&vccq_sdhi3>; |
|
cd-gpios = <&gpio4 15 GPIO_ACTIVE_LOW>; |
|
wp-gpios = <&gpio4 16 GPIO_ACTIVE_HIGH>; |
|
bus-width = <4>; |
|
sd-uhs-sdr50; |
|
sd-uhs-sdr104; |
|
status = "okay"; |
|
}; |
|
|
|
&ssi1 { |
|
shared-pin; |
|
}; |
|
|
|
&usb_extal_clk { |
|
clock-frequency = <50000000>; |
|
}; |
|
|
|
&usb2_phy0 { |
|
pinctrl-0 = <&usb0_pins>; |
|
pinctrl-names = "default"; |
|
|
|
vbus-supply = <&vbus0_usb2>; |
|
status = "okay"; |
|
}; |
|
|
|
&usb2_phy1 { |
|
pinctrl-0 = <&usb1_pins>; |
|
pinctrl-names = "default"; |
|
|
|
status = "okay"; |
|
}; |
|
|
|
&usb3_peri0 { |
|
phys = <&usb3_phy0>; |
|
phy-names = "usb"; |
|
|
|
companion = <&xhci0>; |
|
|
|
status = "okay"; |
|
}; |
|
|
|
&usb3_phy0 { |
|
status = "okay"; |
|
}; |
|
|
|
&usb3s0_clk { |
|
clock-frequency = <100000000>; |
|
}; |
|
|
|
&vin0 { |
|
status = "okay"; |
|
}; |
|
|
|
&vin1 { |
|
status = "okay"; |
|
}; |
|
|
|
&vin2 { |
|
status = "okay"; |
|
}; |
|
|
|
&vin3 { |
|
status = "okay"; |
|
}; |
|
|
|
&vin4 { |
|
status = "okay"; |
|
}; |
|
|
|
&vin5 { |
|
status = "okay"; |
|
}; |
|
|
|
&vin6 { |
|
status = "okay"; |
|
}; |
|
|
|
&vin7 { |
|
status = "okay"; |
|
}; |
|
|
|
&xhci0 { |
|
pinctrl-0 = <&usb30_pins>; |
|
pinctrl-names = "default"; |
|
|
|
status = "okay"; |
|
};
|
|
|