mirror of https://github.com/Qortal/Brooklyn
You can not select more than 25 topics
Topics must start with a letter or number, can include dashes ('-') and can be up to 35 characters long.
395 lines
6.8 KiB
395 lines
6.8 KiB
// SPDX-License-Identifier: GPL-2.0 |
|
// Copyright (c) 2018, Linaro Limited |
|
|
|
#include <dt-bindings/gpio/gpio.h> |
|
#include "qcs404.dtsi" |
|
#include "pms405.dtsi" |
|
#include <dt-bindings/gpio/gpio.h> |
|
#include <dt-bindings/pinctrl/qcom,pmic-gpio.h> |
|
|
|
/ { |
|
aliases { |
|
serial0 = &blsp1_uart2; |
|
serial1 = &blsp1_uart3; |
|
}; |
|
|
|
chosen { |
|
stdout-path = "serial0"; |
|
}; |
|
|
|
vph_pwr: vph-pwr-regulator { |
|
compatible = "regulator-fixed"; |
|
regulator-name = "vph_pwr"; |
|
regulator-always-on; |
|
regulator-boot-on; |
|
}; |
|
|
|
vdd_ch0_3p3: |
|
vdd_esmps3_3p3: vdd-esmps3-3p3-regulator { |
|
compatible = "regulator-fixed"; |
|
regulator-name = "eSMPS3_3P3"; |
|
|
|
regulator-min-microvolt = <3300000>; |
|
regulator-max-microvolt = <3300000>; |
|
regulator-always-on; |
|
}; |
|
|
|
usb3_vbus_reg: regulator-usb3-vbus { |
|
compatible = "regulator-fixed"; |
|
regulator-name = "VBUS_BOOST_5V"; |
|
regulator-min-microvolt = <5000000>; |
|
regulator-max-microvolt = <5000000>; |
|
gpio = <&pms405_gpios 3 GPIO_ACTIVE_HIGH>; |
|
pinctrl-names = "default"; |
|
pinctrl-0 = <&usb_vbus_boost_pin>; |
|
vin-supply = <&vph_pwr>; |
|
enable-active-high; |
|
|
|
/* TODO: Drop this when introducing role switching */ |
|
regulator-always-on; |
|
}; |
|
}; |
|
|
|
&blsp1_uart3 { |
|
status = "okay"; |
|
|
|
bluetooth { |
|
compatible = "qcom,wcn3990-bt"; |
|
vddio-supply = <&vreg_l6_1p8>; |
|
vddxo-supply = <&vreg_l5_1p8>; |
|
vddrf-supply = <&vreg_l1_1p3>; |
|
vddch0-supply = <&vdd_ch0_3p3>; |
|
|
|
local-bd-address = [ 02 00 00 00 5a ad ]; |
|
|
|
max-speed = <3200000>; |
|
}; |
|
}; |
|
|
|
&blsp1_dma { |
|
qcom,controlled-remotely; |
|
}; |
|
|
|
&blsp2_dma { |
|
qcom,controlled-remotely; |
|
}; |
|
|
|
&gcc { |
|
protected-clocks = <GCC_BIMC_CDSP_CLK>, |
|
<GCC_CDSP_CFG_AHB_CLK>, |
|
<GCC_CDSP_BIMC_CLK_SRC>, |
|
<GCC_CDSP_TBU_CLK>, |
|
<141>, /* GCC_WCSS_Q6_AHB_CLK */ |
|
<142>; /* GCC_WCSS_Q6_AXIM_CLK */ |
|
}; |
|
|
|
&pms405_spmi_regulators { |
|
vdd_s3-supply = <&vph_pwr>; |
|
|
|
pms405_s3: s3 { |
|
regulator-always-on; |
|
regulator-boot-on; |
|
regulator-name = "vdd_apc"; |
|
regulator-initial-mode = <1>; |
|
regulator-min-microvolt = <1048000>; |
|
regulator-max-microvolt = <1384000>; |
|
}; |
|
}; |
|
|
|
&pcie { |
|
status = "okay"; |
|
|
|
perst-gpio = <&tlmm 43 GPIO_ACTIVE_LOW>; |
|
|
|
pinctrl-names = "default"; |
|
pinctrl-0 = <&perst_state>; |
|
}; |
|
|
|
&pcie_phy { |
|
status = "okay"; |
|
|
|
vdda-vp-supply = <&vreg_l3_1p05>; |
|
vdda-vph-supply = <&vreg_l5_1p8>; |
|
}; |
|
|
|
&remoteproc_adsp { |
|
status = "okay"; |
|
}; |
|
|
|
&remoteproc_cdsp { |
|
status = "okay"; |
|
}; |
|
|
|
&remoteproc_wcss { |
|
status = "okay"; |
|
}; |
|
|
|
&rpm_requests { |
|
pms405-regulators { |
|
compatible = "qcom,rpm-pms405-regulators"; |
|
|
|
vdd_s1-supply = <&vph_pwr>; |
|
vdd_s2-supply = <&vph_pwr>; |
|
vdd_s3-supply = <&vph_pwr>; |
|
vdd_s4-supply = <&vph_pwr>; |
|
vdd_s5-supply = <&vph_pwr>; |
|
vdd_l1_l2-supply = <&vreg_s5_1p35>; |
|
vdd_l3_l8-supply = <&vreg_s5_1p35>; |
|
vdd_l4-supply = <&vreg_s5_1p35>; |
|
vdd_l5_l6-supply = <&vreg_s4_1p8>; |
|
vdd_l7-supply = <&vph_pwr>; |
|
vdd_l9-supply = <&vreg_s5_1p35>; |
|
vdd_l10_l11_l12_l13-supply = <&vph_pwr>; |
|
|
|
vreg_s4_1p8: s4 { |
|
regulator-min-microvolt = <1728000>; |
|
regulator-max-microvolt = <1920000>; |
|
}; |
|
|
|
vreg_s5_1p35: s5 { |
|
regulator-min-microvolt = <1352000>; |
|
regulator-max-microvolt = <1352000>; |
|
}; |
|
|
|
vreg_l1_1p3: l1 { |
|
regulator-min-microvolt = <1240000>; |
|
regulator-max-microvolt = <1352000>; |
|
}; |
|
|
|
vreg_l2_1p275: l2 { |
|
regulator-min-microvolt = <1048000>; |
|
regulator-max-microvolt = <1280000>; |
|
}; |
|
|
|
vreg_l3_1p05: l3 { |
|
regulator-min-microvolt = <1048000>; |
|
regulator-max-microvolt = <1160000>; |
|
}; |
|
|
|
vreg_l4_1p2: l4 { |
|
regulator-min-microvolt = <1144000>; |
|
regulator-max-microvolt = <1256000>; |
|
}; |
|
|
|
vreg_l5_1p8: l5 { |
|
regulator-min-microvolt = <1800000>; |
|
regulator-max-microvolt = <1800000>; |
|
}; |
|
|
|
vreg_l6_1p8: l6 { |
|
regulator-min-microvolt = <1800000>; |
|
regulator-max-microvolt = <1800000>; |
|
regulator-always-on; |
|
}; |
|
|
|
vreg_l7_1p8: l7 { |
|
regulator-min-microvolt = <1616000>; |
|
regulator-max-microvolt = <3000000>; |
|
}; |
|
|
|
vreg_l8_1p2: l8 { |
|
regulator-min-microvolt = <1136000>; |
|
regulator-max-microvolt = <1352000>; |
|
}; |
|
|
|
vreg_l10_3p3: l10 { |
|
regulator-min-microvolt = <2936000>; |
|
regulator-max-microvolt = <3088000>; |
|
}; |
|
|
|
vreg_l11_sdc2: l11 { |
|
regulator-min-microvolt = <2696000>; |
|
regulator-max-microvolt = <3304000>; |
|
}; |
|
|
|
vreg_l12_3p3: l12 { |
|
regulator-min-microvolt = <3050000>; |
|
regulator-max-microvolt = <3300000>; |
|
}; |
|
|
|
vreg_l13_3p3: l13 { |
|
regulator-min-microvolt = <3000000>; |
|
regulator-max-microvolt = <3300000>; |
|
}; |
|
}; |
|
}; |
|
|
|
&sdcc1 { |
|
status = "okay"; |
|
|
|
supports-cqe; |
|
mmc-ddr-1_8v; |
|
mmc-hs400-1_8v; |
|
bus-width = <8>; |
|
non-removable; |
|
|
|
pinctrl-names = "default", "sleep"; |
|
pinctrl-0 = <&sdc1_on>; |
|
pinctrl-1 = <&sdc1_off>; |
|
}; |
|
|
|
&tlmm { |
|
perst_state: perst { |
|
pins = "gpio43"; |
|
function = "gpio"; |
|
|
|
drive-strength = <2>; |
|
bias-disable; |
|
output-low; |
|
}; |
|
|
|
sdc1_on: sdc1-on { |
|
clk { |
|
pins = "sdc1_clk"; |
|
bias-disable; |
|
drive-strength = <16>; |
|
}; |
|
|
|
cmd { |
|
pins = "sdc1_cmd"; |
|
bias-pull-up; |
|
drive-strength = <10>; |
|
}; |
|
|
|
data { |
|
pins = "sdc1_data"; |
|
bias-pull-up; |
|
drive-strength = <10>; |
|
}; |
|
|
|
rclk { |
|
pins = "sdc1_rclk"; |
|
bias-pull-down; |
|
}; |
|
}; |
|
|
|
sdc1_off: sdc1-off { |
|
clk { |
|
pins = "sdc1_clk"; |
|
bias-disable; |
|
drive-strength = <2>; |
|
}; |
|
|
|
cmd { |
|
pins = "sdc1_cmd"; |
|
bias-pull-up; |
|
drive-strength = <2>; |
|
}; |
|
|
|
data { |
|
pins = "sdc1_data"; |
|
bias-pull-up; |
|
drive-strength = <2>; |
|
}; |
|
|
|
rclk { |
|
pins = "sdc1_rclk"; |
|
bias-pull-down; |
|
}; |
|
}; |
|
|
|
usb3_id_pin: usb3-id-pin { |
|
pinmux { |
|
pins = "gpio116"; |
|
function = "gpio"; |
|
}; |
|
|
|
pinconf { |
|
pins = "gpio116"; |
|
drive-strength = <2>; |
|
bias-pull-up; |
|
input-enable; |
|
}; |
|
}; |
|
}; |
|
|
|
&pms405_gpios { |
|
usb_vbus_boost_pin: usb-vbus-boost-pin { |
|
pinconf { |
|
pins = "gpio3"; |
|
function = PMIC_GPIO_FUNC_NORMAL; |
|
output-low; |
|
power-source = <1>; |
|
}; |
|
}; |
|
usb3_vbus_pin: usb3-vbus-pin { |
|
pinconf { |
|
pins = "gpio12"; |
|
function = PMIC_GPIO_FUNC_NORMAL; |
|
input-enable; |
|
bias-pull-down; |
|
power-source = <1>; |
|
}; |
|
}; |
|
}; |
|
|
|
&usb2 { |
|
status = "okay"; |
|
}; |
|
|
|
&usb2_phy_sec { |
|
vdd-supply = <&vreg_l4_1p2>; |
|
vdda1p8-supply = <&vreg_l5_1p8>; |
|
vdda3p3-supply = <&vreg_l12_3p3>; |
|
status = "okay"; |
|
}; |
|
|
|
&usb3 { |
|
status = "okay"; |
|
|
|
dwc3@7580000 { |
|
dr_mode = "host"; |
|
}; |
|
}; |
|
|
|
&usb2_phy_prim { |
|
vdd-supply = <&vreg_l4_1p2>; |
|
vdda1p8-supply = <&vreg_l5_1p8>; |
|
vdda3p3-supply = <&vreg_l12_3p3>; |
|
status = "okay"; |
|
}; |
|
|
|
&usb3_phy { |
|
vdd-supply = <&vreg_l3_1p05>; |
|
vdda1p8-supply = <&vreg_l5_1p8>; |
|
status = "okay"; |
|
}; |
|
|
|
&wifi { |
|
status = "okay"; |
|
vdd-0.8-cx-mx-supply = <&vreg_l2_1p275>; |
|
vdd-1.8-xo-supply = <&vreg_l5_1p8>; |
|
vdd-1.3-rfa-supply = <&vreg_l1_1p3>; |
|
}; |
|
|
|
/* PINCTRL - additions to nodes defined in qcs404.dtsi */ |
|
|
|
&blsp1_uart2_default { |
|
rx { |
|
drive-strength = <2>; |
|
bias-disable; |
|
}; |
|
|
|
tx { |
|
drive-strength = <2>; |
|
bias-disable; |
|
}; |
|
}; |
|
|
|
&blsp1_uart3_default { |
|
cts { |
|
pins = "gpio84"; |
|
bias-disable; |
|
}; |
|
|
|
rts-tx { |
|
pins = "gpio85", "gpio82"; |
|
drive-strength = <2>; |
|
bias-disable; |
|
}; |
|
|
|
rx { |
|
pins = "gpio83"; |
|
bias-pull-up; |
|
}; |
|
};
|
|
|